Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic atomizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Characterization of Aβ Monomers through the Convergence of Ensemble Properties among Simulations with Multiple Force Fields

We found that amyloid β (Aβ) monomers represent a base state in the pathways of aggregation that result in the fibrils and oligomers implicated in the pathogenesis of Alzheimer’s disease (AD). The structural properties of these intrinsically disordered peptides remain unclear despite extensive experimental and computational investigations. Further, there are mutations within Aβ that change the way the peptide aggregates and are known to cause familial AD (FAD). Here, we analyze the ensembles of different isoforms (Aβ42 and Aβ40) and mutants (E22Δ, D23N, E22K, E22G, and A2T in Aβ40) of Aβ generated with all-atom replica exchange molecular dynamics (REMD) simulations on the μs/replica time scale. These were run using three different force field/water model combinations: OPLS-AA/L and TIP3P (“OPLS”), AMBER99sb-ILDN and TIP4P-Ew (“ILDN”), as well as CHARMM22* and TIP3SP (“CHARMM”). Despite fundamental changes in simulation parameters, we find that the resulting ensembles demonstrate a strong convergence in structural properties. In particular, antiparallel contacts between L17–A21 and A30–L34 are prevalent in ensembles of Aβ40, directly forming β sheets in the OPLS and ILDN combinations. A21–A30 commonly forms an interceding region that rarely interacts with the rest of the peptide. Further, Aβ42 contributes new β hairpin motifs involving V40–I41 in both OPLS and ILDN. However, the structural flexibility of the central region and the electrostatic interactions that characterize it are notably different between the different conditions. Further, for OPLS, each of the FAD mutations disrupts central bend character and increases the polymorphism of antiparallel contacts across the central region. However, the studied mutations in the ILDN set primarily encourage more global contacts involving the N-terminus and the central region, and promote the formation of new β topologies that may seed different aggregates involved in disease phenotypes. Furthermore, these differences aside, the large degree of agreement between simulation sets across multiple force fields provides a generalizable characterization of Aβ that is also consistent with experimental data and models.

59 BASIC BIOLOGICAL SCIENCES↗

Multivalent ions induce lateral structural inhomogeneities in polyelectrolyte brushes

Subtle details about a polyelectrolyte’s surrounding environment can dictate its structural features and potential applications. Atomic force microscopy (AFM), surface forces apparatus (SFA) measurements, and coarse-grained molecular dynamics simulations are combined to study the structure of planar polyelectrolyte brushes [poly(styrenesulfonate), PSS] in a variety of solvent conditions. More specifically, AFM images provide a first direct visualization of lateral inhomogeneities on the surface of polyelectrolyte brushes collapsed in solutions containing trivalent counterions. These images are interpreted in the context of a coarse-grained molecular model and are corroborated by accompanying interaction force measurements with the SFA. Our findings indicate that lateral inhomogeneities are absent from PSS brush layers collapsed in a poor solvent without multivalent ions. Together, AFM, SFA, and our molecular model present a detailed picture in which solvophobic and multivalent ion–induced effects work in concert to drive strong phase separation, with electrostatic bridging of polyelectrolyte chains playing an essential role in the collapsed structure formation.

42 ENGINEERING↗

Electronic Configuration Assignments for UO from Electric Dipole Moment Measurements

Diatomic UO has more than 48 bound states within 10000 cm -1 of the ground state. This electronic state congestion has been attributed to interleaved states from the electronic configurations U 2+ ($5f^37s$)O 2- and U 2+ ($5f^27s^2$)O 2- , respectively. Ligand field theory predicts that each electronic configuration will exhibit states with distinguishable, characteristic vibrational and rotational constants. However, vibronic state mixing modifies the observed vibration–rotation constants, leading to uncertainty in the configurational assignments. The permanent electric dipole moment ($μ_e$) of an electronic state should also manifest a value that is characteristic of the parent electronic configuration. $μ_e$ and other electrostatic and magnetostatic properties should be less influenced by the vibronic state mixing, providing more robust indicators for configurational assignments. In the present study, we have measured the $μ_e$ values for four electronic states of UO. Here, the results clearly demonstrate that the ground state (X(1)4) and the first electronically excited state ((2)4) are derived from the U 2+ ($5f^37s$)O 2– and U 2+ ($5f^27s^2$)O 2– configurations, respectively.

74 ATOMIC AND MOLECULAR PHYSICS↗

Optimized utilization of COMB3 reactive potentials in LAMMPS

An investigation to optimize the application of the third-generation charge optimized many-body (COMB3) interatomic potential and associated input parameters was carried out through the study of solid–liquid interactions in classical molecular dynamics simulations. The rates of these molecular interactions are understood through the wetting rates of water nano-droplets on a bare copper (111) surface. Implementing the Langevin thermostat, the influence of simulation time step, the number of atoms in the system, the frequency at which charge equilibration is performed, and the temperature relaxation rate are all examined. The results indicate that time steps of 0.4 fs are possible when using longer relaxation times for the system temperature, which is almost double the typical time step used for reactive potentials. Additionally, the use of the charge equilibration allows for a fewer atomic layers to be used in the Cu slab. In addition, charge equilibrium schemes do not need to be performed every time step to ensure accurate charge transfer. Interestingly, the rate of wetting for the nanodroplets is dominantly dependent on the temperature relaxation time, which is predicted to significantly change the viscosity of the water droplets. This work provides a pathway for optimizing simulations using the COMB3 reactive interatomic potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Search for dimer emission from photoexcited Al{sub 4}{sup -}

Aluminum cluster anions were stored in an electrostatic ion storage ring and irradiated by a laser pulse. Neutral as well as charged decay products emitted 20 {mu}s after the excitation were identified and recorded using the daughter ion mass spectrometry method. Besides delayed electron detachment, only monomer emission was observed for Al{sub 4}{sup -}. The branching ratio for the monomer channel was determined to be 8{+-}2%, while the dimer channel was found to be <0.01%.

74 ATOMIC AND MOLECULAR PHYSICS↗

Surface contact potential patches and Casimir force measurements

We present calculations of contact potential surface patch effects that simplify previous treatments. It is shown that, because of the linearity of Laplace's equation, the presence of patch potentials does not affect an electrostatic calibration of a two-plate Casimir measurement apparatus. Using models that include long-range variations in the contact potential across the plate surfaces, a number of experimental observations can be reproduced and explained. For these models, numerical calculations show that if a voltage is applied between the plates which minimizes the force, a residual electrostatic force persists, and that the minimizing potential varies with distance. The residual force can be described by a fit to a simple two-parameter function involving the minimizing potential and its variation with distance. We show the origin of this residual force by use of a simple parallel capacitor model. Finally, the implications of a residual force that varies in a manner different from 1/d on the accuracy of previous Casimir measurements is discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Positron annihilation studies of the AlO{sub x}/SiO{sub 2}/Si interface in solar cell structures

Film and film/substrate interface characteristics of 30 and 60 nm-thick AlO{sub x} films grown on Si substrates by thermal atomic layer deposition (ALD), and 30 nm-thick AlO{sub x} films by sputtering, have been probed using variable-energy positron annihilation spectroscopy (VEPAS) and Doppler-broadened spectra ratio curves. All samples were found to have an interface which traps positrons, with annealing increasing this trapping response, regardless of growth method. Thermal ALD creates an AlO{sub x}/SiO{sub x}/Si interface with positron trapping and annihilation occurring in the Si side of the SiO{sub x}/Si boundary. An induced positive charge in the Si next to the interface reduces diffusion into the oxides and increases annihilation in the Si. In this region there is a divacancy-type response (20 {+-} 2%) before annealing which is increased to 47 {+-} 2% after annealing. Sputtering seems to not produce samples with this same electrostatic shielding; instead, positron trapping occurs directly in the SiO{sub x} interface in the as-deposited sample, and the positron response to it increases after annealing as an SiO{sub 2} layer is formed. Annealing the film has the effect of lowering the film oxygen response in all film types. Compared to other structural characterization techniques, VEPAS shows larger sensitivity to differences in film preparation method and between as-deposited and annealed samples.

36 MATERIALS SCIENCE↗

High Mobility and Electrostatics in GeSn Quantum Wells With SiGeSn Barriers

GeSn is an emerging material with potential applications in next‐generation integrated optoelectronics and quantum information processing. While GeSn/SiGeSn quantum wells exhibit promising optical properties, their electrical transport characteristics and governing electrostatics in gated structures remain unexplored. Heterostructure field‐effect transistors are fabricated using GeSn/SiGeSn quantum wells and electronic transport properties of 2D holes are characterized. At 2 K, heterostructure field‐effect transistors with well/barrier compositions of Ge 0.945 Sn 0.055 /Si 0.03 Ge 0.93 Sn 0.04 and Ge 0.9 Sn 0.1 /Si 0.017 Ge 0.927 Sn 0.056 , show peak mobilities of 9000 and 19 000 cm 2 /Vs, respectively, the latter setting a record for the highest mobility reported for GeSn quantum wells with a Sn concentration around 6 % or greater. Remarkably, at low carrier densities, devices with a SiGeSn barrier exhibit mobilities several times higher than previously reported for GeSn quantum wells with a Ge barrier. This higher mobility contrasts with the expectation that alloy scattering from the barrier would reduce carrier mobility. Two mechanisms based on atom probe tomography data analyses are proposed: i) unintentionally improved SiGeSn/GeSn interface and/or ii) reduced alloy scattering from short‐range order. Significant current–voltage hysteresis is observed, with the effective threshold gate voltage shifting by more than 5 V, attributed to non‐equilibrium trapped charge at various interfaces within the SiGeSn heterostructure.

GeSn↗

Fouling behavior of zwitterionic membranes compared to polyamide membranes

Membrane fouling remains a critical bottleneck for reverse osmosis (RO) desalination, driving energy consumption and reducing membrane lifetime. Here, we employ all-atom molecular dynamics simulations to investigate the antifouling behavior of random zwitterionic amphiphilic copolymer (r-ZAC) membranes composed of sulfobetaine methacrylate (SBMA) and allyl methacrylate (AMA), benchmarked against conventional polyamide (PA) RO membranes. Structural and dynamical analyses—including radial distribution functions, coordination numbers, tetrahedral order parameters, vector orientation, and residence-time correlation functions—reveal that r-ZAC surfaces sustain tightly bound, long-lived hydration layers with preserved tetrahedrality and anisotropic water orientation, in sharp contrast to the weak and disordered hydration of PA. Steered molecular dynamics simulations demonstrate that r-ZAC membranes impose substantial free-energy barriers to foulant approach (alginate ≈ 90 kcal/mol, sucrose ≈ 35 kcal/mol, humic acid ≈ 15 kcal/mol), whereas PA membranes exhibit negligible barriers (< 1 kcal/mol) and thermodynamically favorable adsorption. Detailed foulant–surface interaction analyses show that zwitterionic hydration and electrostatic heterogeneity in r-ZAC suppress adhesion, except in the case of amphiphilic humic acid, which exploits multiple binding modes. Together, these results establish molecular-level design principles for antifouling membranes: the combination of zwitterionic hydration, structured interfacial water, and controlled amphiphilic balance in r-ZAC membranes provides superior resistance to organic fouling relative to PA.

Cross-linked polyamide↗

Electrostatic force microscopy and electrical isolation of etched few-layer graphene nano-domains

Nanostructured bi-layer graphene samples formed through catalytic etching are investigated with electrostatic force microscopy. The measurements and supporting computations show a variation in the microscopy signal for different nano-domains that are indicative of changes in capacitive coupling related to their small sizes. Abrupt capacitance variations detected across etch tracks indicates that the nano-domains have strong electrical isolation between them. Comparison of the measurements to a resistor-capacitor model indicates that the resistance between two bi-layer graphene regions separated by an approximately 10 nm wide etch track is greater than about 1×10{sup 12} Ω with a corresponding gap resistivity greater than about 3×10{sup 14} Ω⋅nm. This extremely large gap resistivity suggests that catalytic etch tracks within few-layer graphene samples are sufficient for providing electrical isolation between separate nano-domains that could permit their use in constructing atomically thin nanogap electrodes, interconnects, and nanoribbons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of pH condition on colloidal suspension of exfoliated graphene oxide by electrostatic repulsion

A facile chemical process is described to produce graphene oxide utilizing a zwitterions amino acid intermediate from graphite oxide sheets. 11-aminoundecanoic acid molecules were protonated to intercalate molecules into the graphite oxide sheets to achieve ion exchange, and the carboxyl groups were then ionized in a NaOH solution to exfoliate the graphite oxide sheets. In this way, the produced graphene oxide nanosheets were stably dispersed in water. The delaminated graphene nanosheets were confirmed by XRD, AFM, and TEM. XRD patterns indicated the d{sub 002}-spacing of the graphite greatly increased from 0.380 nm and 0.870 nm. AFM and TEM images showed that the ordered graphite crystal structure of graphene nanosheets was effectively exfoliated by this method. The prepared graphene nanosheets films showed 87.1% transmittance and a sheet resistance of 2.1 Multiplication-Sign 10{sup 3} {Omega}/square. - Graphical abstract: A stable graphene oxide suspension could be quickly prepared by exfoliating a graphite oxide suspension by a host-guest electrostatic repulsion in aqueous solution. Highlights: Black-Right-Pointing-Pointer Graphene nanosheets were prepared by a zwitterions amino acid intermediate from graphite oxide. Black-Right-Pointing-Pointer 11-aminoundecanoic acid was protonated to intercalate molecules into the graphene oxide to achieve ion exchange. Black-Right-Pointing-Pointer The d{sub 002}-spacing of the graphite oxide greatly increased from 0.330 nm to 0.415 nm after 11-aminoundecanoic acid treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How well do one-electron self-interaction-correction methods perform for systems with fractional electrons?

Recently developed locally scaled self-interaction correction (LSIC) is a one-electron SIC method that, when used with a ratio of kinetic energy densities (z σ ) as iso-orbital indicator, performs remarkably well for both thermochemical properties as well as for barrier heights overcoming the paradoxical behavior of the well-known Perdew–Zunger self-interaction correction (PZSIC) method. In this work, we examine how well the LSIC method performs for the delocalization error. Our results show that both LSIC and PZSIC methods correctly describe the dissociation of $H$$^{+}_{2}$ and $H$$^{+}_{2}$ but LSIC is overall more accurate than the PZSIC method. Likewise, in the case of the vertical ionization energy of an ensemble of isolated He atoms, the LSIC and PZSIC methods do not exhibit delocalization errors. For the fractional charges, both LSIC and PZSIC significantly reduce the deviation from linearity in the energy vs number of electrons curve, with PZSIC performing superior for C, Ne, and Ar atoms while for Kr they perform similarly. The LSIC performs well at the endpoints (integer occupations) while substantially reducing the deviation. The dissociation of LiF shows both LSIC and PZSIC dissociate into neutral Li and F but only LSIC exhibits charge transfer from Li + to F – at the expected distance from the experimental data and accurate ab initio data. Overall, both the PZSIC and LSIC methods reduce the delocalization errors substantially.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Final Technical Report

This report highlights of the last 3 years research. Discovery that one-layer (1L) epitaxial graphene plus one carbon interfacial buffer layer (BfL) , both grown by sublimation on SiC(0001), present a stiffness upon indentation similar/larger than bulk diamond and resist to perforation by a diamond indenter. Discovery of an sp 2 - sp 3 phase transformation upon indentation at room temperature of 1L+BfL epitaxial graphene on SiC, the new ultra-hard, ultra-stiff and insulating sp 3 phase was named Diamene . Demonstration of Å-Indentation (ÅI) measurements to measure the stiffness (up to 1 TPa) of ultra-thin (down to 1 atomic layer) films on substrates. First measurement by ÅI of the stiffness of Q-Carbon nano-filaments. Discovery of an oscillatory behavior in friction forces and work function values for even and odd number of layers in polycrystalline MoS 2 films, associated to the oscillatory piezoelectricity of the grains . Demonstration that monolayer MoS 2 can efficiently screen the vdW interaction of the underlying substrate with external systems. Identification of SiC buried terraces and graphene number of layers in a continuous film of epitaxial graphene on SiC by machine learning algorithms. New understanding of defects formation in monolayer MoS 2 . Demonstration of a new method based on thermal scanning probe lithography (t-SPL) for patterning electrodes on 2D materials overcoming EBL limitations . Demonstration of t-SPL for patterning nanoscale magnetic quantum waveguides . New understanding of how charged nanoparticles electrostatically assemble in 1D .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Scaling Atomic Partial Charges of Carbonate Solvents for Lithium Ion Solvation and Diffusion

Lithium-ion solvation and diffusion properties in ethylene carbonate (EC) and propylene carbonate (PC) were studied by molecular simulation, experiments, and electronic structure calculations. Studies carried out in water provide a reference for interpretation. Classical molecular dynamics simulation results are compared to ab initio molecular dynamics to assess nonpolarizable force field parameters for solvation structure of the carbonate solvents. Quasi-chemical theory (QCT) was adapted to take advantage of fourfold occupancy of the near-neighbor solvation structure observed in simulations and used to calculate solvation free energies. The computed free energy for transfer of Li + to PC from water, based on electronic structure calculations with cluster-QCT, agrees with the experimental value. The simulation-based direct-QCT results with scaled partial charges agree with the electronic structure-based QCT values. The computed Li + /PF 6 - transference numbers of 0.35/0.65 (EC) and 0.31/0.69 (PC) agree well with NMR experimental values of 0.31/0.69 (EC) and 0.34/0.66 (PC) and similar values obtained here with impedance spectroscopy. These combined results demonstrate that solvent partial charges can be scaled in systems dominated by strong electrostatic interactions to achieve trends in ion solvation and transport properties that are comparable to ab initio and experimental results. Thus, the results support the use of scaled partial charges in simple, nonpolarizable force fields in future studies of these electrolyte solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electric Double-Layer Structure in Primitive Model Electrolytes. Comparing Molecular Dynamics with Local-Density Approximations

We evaluate the accuracy of local-density approximations (LDAs) using explicit molecular dynamics simulations of binary electrolytes comprised of equisized ions in an implicit solvent. The Bikerman LDA, which considers ions to occupy a lattice, poorly captures excluded volume interactions between primitive model ions. Instead, LDAs based on the Carnahan–Starling (CS) hard-sphere equation of state capture simulated values of ideal and excess chemical potential profiles extremely well, as is the relationship between surface charge density and electrostatic potential. Excellent agreement between the EDL capacitances predicted by CS-LDAs and computed in molecular simulations is found even in systems where ion correlations drive strong density and free charge oscillations within the EDL, despite the inability of LDAs to capture the oscillations in the detailed EDL profiles.

25 ENERGY STORAGE↗

The Role of Dimer Formation in the Nucleation of Superlattice Transformations and Its Impact on Disorder

The formation of defect-free two-dimensional nanocrystal (NC) superstructures remains a challenge as persistent defects hinder charge delocalization and related device performance. Understanding defect formation is an important step toward developing strategies to mitigate their formation. However, specific mechanisms of defect formation are difficult to determine, as superlattice phase transformations that occur during fabrication are quite complex and there are a variety of factors influencing the disorder in the final structure. Here, we use Molecular Dynamics (MD) and electron microscopy in concert to investigate the nucleation of the epitaxial attachment of lead chalcogenide (PbX, where X = S, Se) NC assemblies. We use an updated implementation of an existing reactive force field in an MD framework to investigate how initial orientational (mis)alignment of the constituent building blocks impacts the final structure of the epitaxially connected superlattice. This Simple Molecular Reactive Force Field (SMRFF) captures both short-range covalent forces and long-range electrostatic forces and allows us to follow orientational and translational changes of NCs during superlattice transformation. Our simulations reveal how robust the oriented attachment is with regard to the initial configuration of the NCs, measuring its sensitivity to both in-plane and out-of-plane misorientation. We show that oriented attachment nucleates through the initial formation of dimers, which corroborate experimentally observed structures. We present high-resolution structural analysis of dimers at early stages of the superlattice transformation and rationalize their contribution to the formation of defects in the final superlattice. Collectively, the simulations and experiments presented in this paper provide insights into the nucleation of NC oriented attachment, the impact of the initial configuration of NCs on the structural fidelity of the final epitaxially connected superlattice, and the propensity to form commonly observed defects, such as missing bridges and atomic misalignment in the superlattice due to the formation of dimers. Here, we present potential strategies to mitigate the formation of superlattice defects.

36 MATERIALS SCIENCE↗

Inter-ribbon tunneling in graphene: An atomistic Bardeen approach

A weakly coupled system of two crossed graphene nanoribbons exhibits direct tunneling due to the overlap of the wavefunctions of both ribbons. We apply the Bardeen transfer Hamiltonian formalism, using atomistic band structure calculations to account for the effect of the atomic structure on the tunneling process. The strong quantum-size confinement of the nanoribbons is mirrored by the one-dimensional character of the electronic structure, resulting in properties that differ significantly from the case of inter-layer tunneling, where tunneling occurs between bulk two-dimensional graphene sheets. The current-voltage characteristics of the inter-ribbon tunneling structures exhibit resonance, as well as stepwise increases in current. Both features are caused by the energetic alignment of one-dimensional peaks in the density-of-states of the ribbons. Resonant tunneling occurs if the sign of the curvature of the coupled energy bands is equal, whereas a step-like increase in the current occurs if the signs are opposite. Changing the doping modulates the onset-voltage of the effects as well as their magnitude. Doping through electrostatic gating makes these structures promising for application towards steep slope switching devices. Using the atomistic empirical pseudopotentials based Bardeen transfer Hamiltonian method, inter-ribbon tunneling can be studied for the whole range of two-dimensional materials, such as transition metal dichalcogenides. The effects of resonance and of step-like increases in the current we observe in graphene ribbons are also expected in ribbons made from these alternative two-dimensional materials, because these effects are manifestations of the one-dimensional character of the density-of-states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗