Search NASA⌕ Search

SEARCH · Search NASA

Results for “facility development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Ionomer-free nanoporous iridium nanosheet electrodes with boosted performance and catalyst utilization for high-efficiency water electrolyzers

Increasing the catalyst utilization efficiency and simplifying electrode fabrication processes are crucial to accelerate development of low-cost proton exchange membrane electrolyzer cells (PEMECs). Here, we develop a facile route to fabricate ionomer-free iridium nanosheet integrated electrodes, in which nanoporous iridium nanosheets (IrNS) with abundant exposed edges and nanopores are deposited on thin titanium liquid/gas diffusion layers (TT-LGDLs) via a low-temperature chemical synthesis strategy. Further, benefiting from high catalytic activity, good electrode conductivity and excellent liquid/gas transport properties, such nanoporous IrNS electrodes with low catalyst loadings require low cell voltages of 1.65 V and 1.78 V at 3000 and 6000 mA/cm 2 , respectively. More impressively, a stable performance can be well maintained under extremely high current density tests of 5000 mA/cm 2 , demonstrating the potential of low-loading nanoporous IrNS electrodes in solid-electrolyte based electrochemical conversion cells that require high current density operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Film condensation with high heat fluxes and scaled experiments using pure steam for reactor containment cooling

Condensation tests were performed using a newly developed test facility for scaling the passive containment cooling system (PCCS) to a small modular reactor (SMR). The PCCS of the SMR plays a pivotal role in ensuring greater safety, reliability, and compactness than what is afforded by traditional reactors. Therefore, a well-designed PCCS is essential to SMRs. However, previous studies and test data were unsuitable for scaling, due to high variation in the test geometry and operating conditions. This study intends to close this research gap by using a novel designed scaled test facility consisting of vertical condensing test sections featuring 1-, 2-, and 4-inch-diameter condensing tubes with annular water cooling, and by applying superheated and saturated steam with different steam mass flow ranges of 5–25 g/s. Further, the primary test data, including axial temperatures, mass flow rates, and pressures, were used in conjunction with a standard data reduction method to estimate critical parameters such as heat fluxes, heat transfer coefficients, and condensation rates. These scaled test data would support improving empirical correlations and validating condensation models to identify scaling distortion for SMR PCCSs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Mining waste-driven carbon capture via ocean alkalinity enhancement

Ocean alkalinity enhancement (OAE) has emerged as a promising strategy to mitigate ocean acidification and reduce global warming. Traditional metal (e.g., critical materials) mining industries release alkaline waste via mining tailings with high concentrations (99.2%) of calcium and magnesium oxide (CaO, MgO). Incorporating mining waste into OAE processes is less energy intensive than processes relying on calcination of limestone for CaO production. The solubility limit of simulated mining waste in American Society for Testing and Materials (ASTM) seawater is 75 mg⋅L -1 , which can sequester 118 mg of carbon dioxide (CO 2 ). The solubility in seawater retrieved from Sunset Beach, FL was 25 mg⋅L -1 . Changes in pH, total alkalinity, and total inorganic carbon were analyzed to confirm the successful addition of simulated alkaline mining waste without the formation of secondary precipitation. This study proposes a new OAE strategy where a facility is developed nearby ocean waters that mixes alkaline waste with seawater. Subsequently, the seawater is met with previously captured, pure CO 2 to bring the pH back to 8.2 and eliminate the risks of pH shock and secondary precipitation. Technoeconomic analysis estimated an energy requirement of 1.4 GJ per ton of CO 2 stored that resulted in a processing cost of $\$$266 per ton of CO 2 sequestered (4.2 GJ per ton, $\$$807 per ton of CO 2 for real seawater). Results from this study underscore the potential for utilizing mining waste in OAE processes and provide a pathway for practical deployment.

Absorption↗

Stable yet hydrophilic graphene oxide nanomembranes by zwitterionic reduction for dye desalination

Holey graphene oxide (HGO) nanosheets have emerged as a promising membrane platform for dye desalination, and they must be reduced to enhance hydrophobicity and stability for long-term underwater operation, which usually decreases water and salt permeance. Herein, we develop a facile method to stabilize HGO nanosheets while retaining their hydrophilicity by reducing them with sulfobetaine amine (SBAm, a superhydrophilic zwitterion), achieving high water and salt permeance and a high salt/dye separation factor. Specifically, HGO nanosheets react with SBAm via an amine-epoxide reaction, rendering reduced HGO nanosheets containing superhydrophilic zwitterions. The effects of in-plane pores, zwitterion content, and layer thickness on the membrane chemistry, structure, and salt/dye separation properties of the SBAm-reduced HGOs (SHGOs) are thoroughly examined. The membrane achieves a Na 2 SO 4 /Direct red separation factor of up to 850, surpassing the state-of-the-art GO membranes. Moreover, hollow fiber membrane modules based on SHGOs are fabricated and exhibit stable performance in multi-cycle tests over 100 h of operation with mixed dye-salt solutions, demonstrating the scalability of our approach and its potential for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bioinspired strategy for tuning thermal stability of PVA via hydrogen-bond crosslink

Although many approaches have been employed to enhance thermal stability of PVA, developing a facile and effective strategy remains highly attractive. Herein, we demonstrate a highly effective approach to strikingly improve thermal stability of PVA by selecting the types of multiamines molecules to tune the hydrogen-bond crosslink density. Results show that only adding 0.5 wt% of 2,4,5,6-tetraaminopyrimidine can make the initial degradation temperature (T-i) and maximum degradation temperature (T-max) of PVA increase by similar to 55 degrees C and 98 degrees C due to the formation of 3D physically H-bond crosslinked network, resulting in superior thermal stability property to those of PVA nanocomposites. Moreover, thermal stability strongly depends on the H-bond crosslink density, and T-i and T-max basically obey the linear hydrogen-bond relations despite some deviations. This work opens up a novel biological methodology for creating thermally stable polymeric materials. (C) 2015 Published by Elsevier Ltd.

COMPOSITES↗

Enabling fast-charging of lithium-ion batteries through printed electrodes

It has been well recognized that introducing secondary porous networks (SPNs) into the electrodes can effectively improve the electrochemical performance of lithium-ion batteries (LIBs), especially under fast-charging operations. However, the process complexity and high cost limit the commercial success of advanced electrodes with SPNs. To address this issue, we developed a facile screen-printing process to produce structured graphite electrodes with SPNs. The experimental results demonstrated that, by tuning the diameter and center-to-center (C2C) distance of emulsion dots on the stencil screen, the pore diameters and C2C pore distances of SPNs in screenprinted electrodes can be precisely controlled in the range of 100 mu m to 1 mm and 100 mu m to 3 mm respectively. In addition, the SPNs with hexagonal and square-shape pore alignments have also been imprinted onto the electrode coatings through adjusting the patterns of screen stencils. Used as anodes, the printed graphite electrodes demonstrated significantly reduced overpotential and voltage fluctuation under fast-charging operations from 2C to 6C. Coupled with LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) cathodes, the full cells with printed graphite anodes exhibited an unprecedently stable performance with almost no capacity decay up to 170 cycles when charged to 80 % SOC at 2C. Observations from electron microscopy showed plated lithium undetectable at the surface of printed graphite electrodes after numerous cycles. The electrochemical analysis on the voltage evolution during the cell rest period indicated the significantly delayed onset of lithium plating in the presence of printed graphite electrodes. In conclusion, all these results suggest that the significantly improved cell performance is associated with the shortened Li-ion diffusion distance, reduced polarization and suppressed Li plating in the printed electrodes with patterned SPNs.

25 ENERGY STORAGE↗

Gaseous contaminant transfer in membrane-based air-to-air energy exchangers

Membrane-based air-to-air energy exchangers (M–AAEEs) transfer heat and moisture between building exhaust air and fresh ventilation air streams through a membrane, thereby reducing the energy required for conditioning the fresh ventilation air. Energy exchangers are typically used in buildings with relatively clean building exhaust air, such as office buildings and schools. Recently interest in using energy exchangers in a wider range of buildings has grown, to reduce the energy consumption associated with the heating, ventilating, and air-conditioning (HVAC) systems in these buildings. However, if the building exhaust air is not clean, as would be the case for laboratories or factories, new risks are encountered when using energy exchangers. It is possible that gaseous contaminants in the exhaust air may also transfer along with the moisture through the membranes, contaminating the incoming fresh ventilation air. Current test standards provide a test procedure to determine the contamination of the fresh ventilation air by measuring the transfer of an inert tracer gas in an energy exchanger. However, the tracer gas test may not represent the transfer of common indoor air contaminants due to differences in their transport properties. Therefore, in this study, an experimental facility is developed to determine the transfer of seven different contaminants through two membranes (porous and dense) at different flow rates. Contaminant transfer is quantified using a parameter called the exhaust contaminant transfer ratio (ECTR), which gives the fraction of the contaminants transferred from the exhaust air to the fresh ventilation air. A theoretical model based on the effectiveness-number of transfer units (ε-NTU) correlation and moisture transfer resistance of the membrane is presented to determine transfer through porous membranes and validated with experimental results. The major contribution of this paper is that it presents a simple method to predict the transfer of different contaminants through a porous membrane based on the moisture transfer resistance of the membrane at different operating conditions. It is found that as contaminant diffusivity decreases, ECTR generally also decreases, and as the flow rate increases, ECTR decreases, which is consistent with the predictions from the correlation.

42 ENGINEERING↗

Backlighter development at the National Ignition Facility (NIF). Zinc to Zirconium

A K-shell X-ray emission from laser-irradiated planar Zn, Ge, Br, and Zr foils was measured at the National Ignition Facility for laser irradiances in the range of 0.6–9.5 × 10 15 W/cm 2 . The incident laser power had a pre-pulse to enhance the laser-to-X-ray conversion efficiency (CE) of a 2–5 ns constant-intensity pulse used as the main laser drive. The measured CE into the 8–16 keV energy band ranged from 0.43% to 2%, while the measured CE into the He-like resonance 1s2–1s2p(1P) and intercombination 1s2–1s2p(3P) transitions, as well as from their 1s2(2s,2p)l–1s2p(2s,2p)l satellite transitions for l = 1, 2, 3, corresponding to the Li-, Be-, and B-like resonances, respectively, ranged from 0.3% to 1.5%. Moreover, absolute and relative CE measurements are consistent with X-ray energy scaling of (hν) -3 to (hν) -5 , where hν is the X-ray energy. The temporal evolution of the broadband X-ray power was similar to the main laser drive for ablation plasmas having a critical density surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental design, operation, and results of a 4 kW high temperature steam electrolysis experiment

High temperature steam electrolysis (HTSE) is a promising technology for large-scale hydrogen production. However, research on HTSE performance above the kW level is limited. This paper presents the results of 4 kW HTSE long-term test completed in a multi-kW test facility recently developed at the Idaho National Laboratory (INL). The 4 kW HTSE unit included two solid oxide electrolysis stacks operating in parallel, each of which included 40 electrode-supported planar cells. A current density of 0.41 A/cm2 was used for the long-term operation, resulting in a hydrogen production rate about 25 slpm. A demonstration of 920 hours stable operation was achieved. The paper also includes detailed descriptions of the piping layout, steam generation and delivery system, test fixture, heat recuperation system, hot zone, instrumentation, and operating conditions. As a result, this successful demonstration of multi-kW scale HTSE unit will help to advance the technology toward near-term commercialization.

08 HYDROGEN↗

Morphology-controlled synthesis of Co{sub 3}O{sub 4} by one step template-free hydrothermal method

Highlights: • Co{sub 3}O{sub 4} crystals had been synthesized by one step template-free hydrothermal method. • The H{sub 2}O{sub 2} plays a crucial role in morphological control of Co{sub 3}O{sub 4} nanostructures. • The morphology has significant effect on the optical property of Co{sub 3}O{sub 4}. - Abstract: We had developed a facile synthetic route of Co{sub 3}O{sub 4} crystals with different morphologies via one step template-free hydrothermal method. The phase and composition of the Co{sub 3}O{sub 4} were investigated by X-ray powder diffraction and Raman spectrum. The morphology and structure of the synthesized samples were characterized by scanning electron microscopy and transmission electron microscopy. The H{sub 2}O{sub 2} played a crucial role in morphological control of Co{sub 3}O{sub 4} nanostructures. It only obtained Co-based precursor in the absence of H{sub 2}O{sub 2}. On the contrary, the Co{sub 3}O{sub 4} with different morphologies including nanoparticles, nano-discs and well-defined octahedral nanostructures were synthesized in the presence of H{sub 2}O{sub 2}. In addition, the optical property of the obtained Co{sub 3}O{sub 4} samples was investigated by UV–vis spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hierarchically macro–mesoporous TiO{sub 2} film via self-assembled strategy for enhanced efficiency of dye sensitized solar cells

Highlights: • A new hierarchically macro–mesoporous TiO{sub 2} film is fabricated via TiF{sub 4} hydrolysis. • TiF{sub 4} hydrolysis is accompanied with self-assembled process of TiO{sub 2} nanoparticles. • The hierarchically porous TiO{sub 2} films show higher performance than nonporous film. - Abstract: The hierarchically porous structure of TiO{sub 2} film plays an important role on improved photoelectric conversion efficiency in dye-sensitized solar cells (DSSCs). It is highly required to develop a facile strategy to prepare the hierarchical porous photoelectrode. In this study, a novel hierarchically macro–mesoporous TiO{sub 2} film as photoelectrode of DSSCs is fabricated by a self-assembled process of TiO{sub 2} nanoparticles via TiF{sub 4} hydrolysis. The hydrolysis of TiF{sub 4} is accompanied with self-assembled process of TiO{sub 2} nanoparticles on the surface of electrophoretic-deposited titanate nanotube film which provides effective active sites for the deposition of TiO{sub 2} nanoparticles owing to a large amount of hydroxyl groups, resulting in the formation of hierarchically porous structures. The hierarchically porous TiO{sub 2} film is mainly composed of mesopores with a size of 2–50 nm and macropores with a wide range of 0.5–5 μm, which contribute to an obviously higher conversion performance (6.70%) than nonporous P25-TiO{sub 2} film (4.01%). The main reasons for enhanced conversion efficiency of hierarchically porous TiO{sub 2} film can be attributed to adsorption of more dye molecules, rapid diffusion and efficient transport of electrolyte, and longer electron lifetime. This work may provide new insights into preparing porous structure of TiO{sub 2} films in DSSCs for modification of photoelectric conversion efficiency.

36 MATERIALS SCIENCE↗

Integrated carbon cloth supported LiFePO4/N-C films as high-performance cathode for lithium ion batteries

Highlights: • Construct carbon cloth supported LiFePO{sub 4}/N-C films via hydrothermal. • The LiFePO{sub 4}/N-C films show high capacity and good cycles. • Carbon cloth and N-C layer work together to provide fast ion/electron transfer. - Abstract: Fabricating advanced cathode is critical for the development of high-performance lithium ion batteries (LIBs). In this work, we develop a facile hydrothermal method for construction of LiFePO{sub 4}/N-C films on the carbon cloth forming integrated binder-free cathode. The LiFePO{sub 4}/N-C films are composed of interconnected nanoscale LiFePO{sub 4}/N-C particles with diameters of 100–200 nm. High porosity and good adhesion are obtained in the carbon cloth supported LiFePO{sub 4}/N-C films (CC + LiFePO{sub 4}/N-C films). As compared to the LiFePO{sub 4}/C powder nanoparticles, the CC + LiFePO{sub 4}/N-C films show much better electrochemical properties with higher capacities, smaller polarization and better high-rate cycling life. A high capacity of 169 mAh g{sup −1} at 1C is achieved for the carbon cloth supported LiFePO{sub 4}/N-C films, superior to the LiFePO{sub 4}/C powder nanoparticles (154 mAh g{sup −1} at 5C). This enhancement is owing to the unique integrated porous architecture and N-C coating. Our work shows a new way to construct integrated cathode for application in LIBs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fast synthesis of sub-10 nm β-NaYF4:Yb3+, Er3+@NaYF4 core-shell upconversion nanocrystals mediated by oleate ligands

Highlights: • Fast synthesize ultra-small β-NaYF{sub 4}:Yb{sup 3+}, Er{sup 3+} UCNCs with 0 min reaction or down to 5.3 nm. • Highly bright sub-10 nm β-NaYF{sub 4}:Yb{sup 3+}, Er{sup 3+} core-shell NCs were obtained. • OA{sup −} ligands cannot only promote the α-to-β phase transition, but also inhibit the crystal growth. • OA{sup −} ligands manipulated phase transition and size evaluation is also applicable to other UCNCs. - Abstract: We developed a facile approach for the fast synthesis of ultrasmall and monodisperse β-NaYF{sub 4}:Yb{sup 3+}, Er{sup 3+} nanocrystals down to 5.3 nm with the assistant of oleate ligands, based on which the highly bright sub-10 nm β-NaYF{sub 4}:Yb{sup 3+}, Er{sup 3+}@NaYF{sub 4} core-shell nanocrystals with three order of magnitude increased upconversion emission were successfully obtained by a seed-mediated growth method. The reaction time and temperature dependent experimental results implied that the introduciton of extra oleate ligands can both promote the α-to-β phase transition and impeded the crystal growth of NaYF{sub 4}, which is due to the oleate ligand induced orderly arrangement of Y{sup 3+} and capping effect, respectively. It is expected that the oleate ligands mediated phase transition and size evaluation, demonstrated here in NaYF{sub 4}:Yb{sup 3+}, Er{sup 3+} NCs, is also applicable to other lanthanide-doped upconversion nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reducing Non-Radiative Recombination in Perovskite Solar Cells with a SiO2-Graphene Oxide Buried Interface Layer

Perovskite solar cells (PSCs) have emerged as a transformative photovoltaic technology. However, the device performance of inverted PSCs is dramatically limited by surface defects and the underlying film morphology of metal halide perovskite (MHP) thin film. Herein, we report a novel buried interface layer consisting of SiO2 nanoparticles (NPs) chemically bonded to graphene oxide (GO), deposited atop a hydrophobic hole extraction layer (HEL) to address this limitation. The SiO2 NPs serve as insoluble scaffolds that immobilize GO sheets on the hydrophobic HEL surface, enabling the formation of homogeneous MHP thin films. Meanwhile, the GO functional groups interact with surface-uncoordinated Pb2+, suppressing interfacial defects and guiding crystal grain growth of the resultant MHP thin films. This synergistic effect suppresses non-radiative charge recombination and enhances charge extraction efficiency. As a result, a 26.07% efficiency with significantly suppressed photocurrent hysteresis is observed from PSCs incorporating the SiO2-GO buried interface layer. Moreover, the above PSCs maintain 92% of their initial PCE after 1800 h of continuous operation at the maximum power point under AM 1.5 G (100 mW/cm2) illumination at 25 degrees C in air with 50-60% relative humidity. These results demonstrate that we have developed a facile and effective way to realize high-performance inverted PSCs.

14 SOLAR ENERGY↗

Estimating the impact of the 'digital switchover' on disposal of WEEE at household waste recycling centres in England

Using Hampshire County Council (HCC) as a case study, this paper evaluates and discusses the estimated impacts of the so-called digital switchover (DSO) (scheduled for 2012 in Hampshire) on Household Waste Recycling Centres (HWRCs) in England and the UK. Two public surveys of Hampshire residents were used to collect data on their preparedness for and awareness of the switchover and its implications. The survey also sought to establish the quantities of televisions (TVs) and TV related devices that are ready for the DSO. The quantities of TV and related devices that are likely to be disposed via HCC's collection network have been established and compared to the County's current handling capacities for waste electronic and electrical equipment (WEEE). Best and worst case potential net disposal scenarios have been established and the latter compared to Government projections. In addition, the potential environmental, logistical, financial and legal impacts of the WEEE arising as a consequence of the switchover have been identified and discussed. The results indicate that the majority of TVs both in Hampshire and the UK are digital ready and that awareness of the switchover is high. In contrast, most recording devices in Hampshire are not ready for the DSO. Awareness of the timeframe of the event remains modest however and about half of Hampshire households were not aware that TV recording devices will be affected by the switchover. A significant proportion of waste TVs and related equipment would be taken to HWRCs in contrast to smaller items such as remote controls that would more likely be disposed with normal household waste. Projected figures for the DSO year show that if Hampshire maintained its current collection capacity for WEEE it would experience a handling shortfall of around {approx}100 K for TVs and recording devices, respectively. The most important finding of the study is that the UK Government may have substantially underestimated the quantities of TV and related devices that will be disposed during the switchover. The potential impacts for local and national WEEE management have been discussed. The paper concludes by making recommendations to address identified issues.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Modelling a recovery network for WEEE: A case study in Portugal

The European Union directive for electric and electronic waste, published in 2003, enforced all European countries to meet some targets concerning the recycling and recovery of these products. This directive was transposed to the Portuguese legislation in 2004. Following this, a group of EEE producers set up an organization (Amb3e) whose mission was to design and manage a nationwide recovery network for WEEE, which will be the subject matter of this work. A generic MILP model is proposed to represent this network, which is applied to its design and planning, where the best locations for collection and sorting centres are chosen simultaneously with the definition of a tactical network planning. Several analyses are performed to provide further insights regarding the selection of these alternative locations. The results gave support to the company strategic expansion plans for a high number of centres to be opened and to their location near the major WEEE sources.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of Ionizing Radiation on the Redox Chemistry of Penta- and Hexavalent Americium

The recent development of facile methods to oxidize trivalent americium to its higher valence states holds promise for the discovery of new chemistries and critical insight into the behavior of the 5f electrons. However, progress in understanding high valent americium chemistry has been hampered by americium’s inherent ionizing radiation field, and its concomitant effects on americium redox chemistry. Any attempt to understand high valent americium reduction and/or disproportionation must account for the effects of these radiolytic processes. Fortunately, the effects of ionizing radiation on water and aqueous nitric acid solutions are well known. Values for the yields of the major radiolytically produced reactive species that could conceivably react with americium, and their rate coefficients, are available for use in radiation chemical modeling. Therefore, we present a complete, quantitative, mechanistic description of the radiation-induced redox chemistry of the americyl oxidation states in aerated, aqueous nitric acid, as a function of radiation quality (type and energy) and solution composition using multi-scale modeling calculations supported by experiment. The reduction of Am(VI) to Am(V) was found to be most sensitive to the effects of ionizing radiation, undergoing rapid reductions with the steady-state products of aqueous HNO 3 radiolysis, i.e., HNO 2 , H 2 O 2 , and HO 2 •, which dictated its practical lifetime under acidic conditions. In contrast Am(V) is only susceptible to radiolytic oxidation, mainly through its reactions with NO 3 •, and is notably radiation resistant with respect to direct one-electron reduction to produce Am(IV). Our multiscale modeling calculations predict that the lifetime of Am(V) is dictated by its rate of disproportionation, 2AmO 2 + + 4 Haq + → AmO 2 2+ + Am 4+ + 2H 2 O, with a fourth-order dependence on [H aq + ] in agreement with previous experimental findings, giving an optimized rate coefficient of $k$ = 2.27 × 10 -6 M -5 s -1 . This disproportionation initially produces Am(IV) and Am(VI) species, but the lack of any spectroscopic evidence in our study for Am(IV) suggests that solvent reduction of this cation occurs rapidly. The ultimate product of all the Am(VI)/Am(V) irradiations is Am(III), which shows great stability in an irradiation field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗