SEARCH · Search NASA

Results for “global optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Numerical analysis of discrete fractional integrodifferential structural dampers

This paper develops solution algorithms enabling the handling of the dynamic response of nonlinear structures contained discretely attached dampers modeled by fractional integrodifferential operators of the Grunwald-Liouville-Riemann type. The development consists of two levels of formulation, namely: (1) numerical approximations of fractional operators and, (2) the establishment of global level implicit schemes enabling the solution to nonlinear structural formulations. To generalize the overall results, error estimates are derived for the fractional operator approximation algorithm. These enable an ongoing optimization of solution efficiency for a given error tolerance. To benchmark the scheme, the results of several numerical experiments are presented. These illustrate the numerical characteristics of the overall formulation.

Padovan, Joseph↗

NASA NTRS1992

Structural design optimization with survivability dependent constraints application: Primary wing box of a multi-role fighter

The superior survivability of a multirole fighter is dependent upon balanced integration of technologies for reduced vulnerability and susceptability. The objective is to develop a methodology for structural design optimization with survivability dependent constraints. The design criteria for optimization will be survivability in a tactical laser environment. The following analyses are studied to establish a dependent design relationship between structural weight and survivability: (1) develop a physically linked global design model of survivability variables; and (2) apply conventional constraints to quantify survivability dependent design. It was not possible to develop an exact approach which would include all aspects of survivability dependent design, therefore guidelines are offered for solving similar problems.

Dolvin, Douglas J.↗

NASA NTRS2005

Evolution of Galaxies and the Star Formation Rate in the Infrared

A central goal of extragalactic observational astronomy is to understand how normal galaxies evolve with redshift, and particularly when galaxies formed their stars. While optical and rest-frame UV observations have begun to address these issues, the interpretation of such data is particularly challenging because of the sensitivity to dust obscuration (at optical and UV wavelengths). The absorbed light is re-radiated at IR wavelengths, hence the optimal indicators of the star formation rate (SFR) is at a rest-frame wavelength of approx. 60 microns. The Spitzer Space Telescope mission is revolutionizing the study of the global properties and evolution of galaxies. Spitzer reaches nearly two orders of magnitude more sensitivity than previous IR space missions. This research program is to study the SFR using statistical samples of galaxies in the local universe, at intermediate redshifts, and set the stage for continuing studies up to z=5. The overall research program is divided into three main investigations: A Mid-IR Hubble Atlas and SFR estimators in the local universe, Evolution of the SFR at 0 < z < 1 using pencil beam redshift surveys, and Galaxy formation and evolution at 1 < z < 5. The first papers from Spitzer were published during the last year, including ten refereed journal papers where the PI was first or co-author.

Pahre, Michael A.↗

NASA NTRS2005

Constraining Oceanic Sources and Sinks of CO2 by Inverse Modeling: A First Step Toward Assimilation of In Situ and Remote Data

The primary goal of this collaborative project, lead by Nicholas Gruber at UCLA, is to better quantify the air-sea fluxes of pre-industrial and anthropogenic carbon dioxide CO2 for the global ocean with a newly developed inverse method. The method involves using ocean general circulation models (OGCMs) to characterize the subsurface distribution of tracers injected for different regions of the ocean surface. By linearly combining a series of these basis (or Greens) functions, one should be able to recreate any arbitrary ocean tracer field. In our case, we are using the global database of ocean dissolved inorganic carbon (DIC) from the WOCE/JGOFS global CO2 survey from the 1990s. The observed DIC field has been partitioned into pre-industrial and anthropogenic components using the empirical C* technique. We then solve for an optimal combination of the regional basis functions that best match the two sets observations in a least-squares sense with singular value decomposition. This in turn provides solutions for the regional air-sea CO2 fluxes (pre-industrial and anthropogenic) that are independent of more traditional estimates derived from surface water disequilibria in the partial pressure of CO2 and wind speed gas exchange parameterizations. We are apply the method to a suite of nine different OGCMs to test the robustness of the derived surface fluxes fields to differences in ocean circulation. Together with a collegue Keith Lindsay at NCAR, S. Doney's role in this project was to create the appropriate steady-state and temporally evolving basis functions from the NCAR CSM-1 ocean circulation model. Because of a slow start across the project in defining a common set of experimental protocols, we requested and were given a one year, no cost extension. Both the steady-state and temporally evolving basis functions were delivered to the UCLA group for further analysis. Additional information is included in the original extended abstract.

Doney, Scott↗

DOE OSTI2025

Multi-plane moment-of-fluid interface reconstruction in 3D

Moment-of-fluid (MOF) methods for interface reconstruction approximate the region occupied by material in each mesh element only through reference to its geometric moments. Here, we present a 3D MOF method that represents the material (POM) in each cell as the convex intersection of the cell and multiple half-spaces, each selected to minimize the least-squares error between computed moments of the approximated material and provided reference moments. This optimization problem is highly non-linear and non-convex, making the numerical result very sensitive to the initial guess. To create an effective initial guess in each cell, we construct an ellipsoid from 0th–2nd order reference moments such that its shape corresponds with that of the POM. Within this ellipsoid we inscribe a polyhedron, and initialize the minimization problem with the half-spaces defined by each of its faces. The inscribed polyhedron has minimally 4 faces, and using up to 3rd order moments permits optimization over up to 20 unknown values. We therefore define MOF methods that utilize 4, 5, or 6 half-spaces, correspondingly initialized with the faces of a single inscribed tetrahedron, triangular prism, or hexahedron. Stability of the non-linear optimization is further improved with a prepossessing step that normalizes the reference moments according to the axes of the reference ellipsoid. Using this approach, the non-linear least-squares solver reliably converges to a near-global minimum from a single initial guess. We demonstrate accuracy and robustness using single-cell and multi-cell examples over a wide spectrum of geometry. In particular, we demonstrate our ability to exactly reproduce several important and complex features defined by up to four half-spaces, such as corners, filaments, filament tips, and embedded material in the cell.

3D interface reconstruction↗

NASA NTRS1999

Systematic Differences between Satellite-Based Presipitation Climatologies over the Tropical Oceans

Since the beginning of the World Climate Research Program's Global Precipitation Climatology Project (GPCP) satellite remote sensing of precipitation has made dramatic improvements, particularly for tropical regions. Data from microwave and infrared sensors now form the most critical input to precipitation data sets and can be calibrated with surface gauges to so that the strengths of each data source can be maximized in some statistically optimal sense. It is clear however that there still remain significant uncertainties with satellite precipitation retrievals which limit their usefulness for many purposes. Systematic differences i'A tropical precipitation estimates have been brought to light in comparison activities such as the GPCP Algorithm Intercomparison Project and more recent Wetnet Precipitation Intercomparison Project 3. These uncertainties are assuming more importance because of the demands for validation associated with global climate modeling and data assimilation methodologies. The objective of the present study is to determine the physical basis for systematic differences in spatial structure of tropical precipitation as portrayed by several different satellite-based data sets. The study is limited to oceanic regions only and deals primarily with aspects of spatial variability. We are specifically interested in why MSU channel 1 and GPI precipitation differences are so striking over the Eastern Pacific ITCZ and why they both differ from other microwave emission-based precipitation estimates from SSM/I and a scattering-based deep convective ice index from MSU channel 2. Our results to date have shown that MSU channel I precipitation estimates are biased high over the Eastern Pacific ITCZ because of two factors: (1) the hypersensitivity of this frequency to cloud water in contrast to falling rain drops, and (2) unaccounted for scattering effects by precipitation-size ice which depresses the signal of the liquid water emission. Likewise, cold cloud top climatologies such as the GPI show an excess (a deficit) in estimated rainfall over the E. Pacific ITCZ (Warm Pool region). We show that these algorithms need to account for regionally varying heights (or temperatures) at which tropical convection detrains to form cirrus shields. A second objective we pursue is to identify variations in the macroscale cloud physical and thermodynamic properties of precipitation regimes" and relate these differences to tropical dynamical mechanisms of tropical heat and moisture balance. Finally, we interpret the algorithm differences and their associations with tropical dynamics in terms of WCRP GPCP goals for constructing precipitation climatologies.

Robertson, Frankin R.↗

DOE OSTI2025

Incorporating the Acclimation of Photosynthesis and Leaf Respiration in the Noah‐MP Land Surface Model: Model Development and Evaluation

Abstract Realistic simulation of leaf photosynthetic and respiratory processes is needed for accurate prediction of the global carbon cycle. These two processes systematically acclimate to long‐term environmental changes by adjusting photosynthetic and respiratory traits (e.g., the maximum photosynthetic capacity at 25°C ( V cmax,25 ) and the leaf respiration rate at 25°C ( R 25 )) following increasingly well‐understood principles. While some land surface models (LSMs) now account for thermal acclimation, they do so by assigning empirical parameterizations for individual plant functional types (PFTs). Here, we have implemented an Eco‐Evolutionary Optimality (EEO)‐based scheme to represent the universal acclimation of photosynthesis and leaf respiration to multiple environmental effects, and that therefore requires no PFT‐specific parameterizations, in a standard version of the widely used LSM, Noah MP. We evaluated model performance with plant trait data from a 5‐year experiment and extensive global field measurements, and carbon flux measurements from FLUXNET2015. We show that observed R 25 and V cmax,25 vary substantially both temporally and spatially within the same PFT ( C.V. >20%). Our EEO‐based scheme captures 62% of the temporal and 70% of the spatial variations in V cmax,25 (73% and 54% of the variations in R 25 ). The standard scheme underestimates gross primary production by 10% versus 2% for the EEO‐based scheme and generates a larger spread in r (correlation coefficient) across flux sites (0.79 ± 0.16 vs. 0.84 ± 0.1, mean ± S.D.). The standard scheme greatly overestimates canopy respiration (bias: ∼200% vs. 8% for the EEO scheme), resulting in less CO 2 uptake by terrestrial ecosystems. Our approach thus simulates climate‐carbon coupling more realistically, with fewer parameters.

Ren, Yanghang [Department of Earth System Science ↗

DOE OSTI2025

Science acceleration and accessibility with self-driving labs

In the evolving landscape of scientific research, the complexity of global challenges demands innovative approaches to experimental planning and execution. Self-Driving Laboratories (SDLs) automate experimental tasks in chemical and materials sciences and the design and selection of experiments to optimize research processes and reduce material usage. This perspective explores improving access to SDLs via centralized facilities and distributed networks. We discuss the technical and collaborative challenges in realizing SDLs’ potential to enhance human–machine and human–human collaboration, ultimately fostering a more inclusive research community and facilitating previously untenable research projects.

Canty, Richard B. [North Carolina State University↗

NASA NTRS1987

CuInSe2/ZnSe solar cells using reactively sputter-deposited ZnSe

Results on CuInSe2/ZnSe thin-film heterojunction photovoltaic devices are presented. By the use of reactive magnetron cosputtering of Zn and In dopant in Ar/H2Se, ZnSe thin films have been deposited on glass and conducting SnO2-coated glass substrates with resistivity as low as 20 ohm-cm at deposition temperatures as low as 120 C. Preliminary ZnSe depositions onto CuInSe2 films supplied by industrial laboratories are encouraging. Reactive-sputter-deposition parameters for ZnSe have yet to be optimized for CuInSe2 substrates; however, open-circuit voltages as high as 430 mV were obtained. The highest short-circuit current density, as determined by spectral response weighted for AM1.5 global insulation, was 37.4 mA/sq cm. In all cases, a highly conductive ZnO film was overcoated onto the ZnSe to reduce the overall sheet resistance.

Nouhi, A.↗

NASA NTRS1991

Global water cycle

The primary objective is to determine the scope and interactions of the global water cycle with all components of the Earth system and to understand how it stimulates and regulates changes on both global and regional scales. The following subject areas are covered: (1) water vapor variability; (2) multi-phase water analysis; (3) diabatic heating; (4) MSU (Microwave Sounding Unit) temperature analysis; (5) Optimal precipitation and streamflow analysis; (6) CCM (Community Climate Model) hydrological cycle; (7) CCM1 climate sensitivity to lower boundary forcing; and (8) mesoscale modeling of atmosphere/surface interaction.

Robertson, Franklin R.↗

NASA NTRS1985

Balloon-based interferometric techniques

A balloon-borne triple-etalon Fabry-Perot Interferometer, observing the Doppler shifts of absorption lines caused by molecular oxygen and water vapor in the far red/near infrared spectrum of backscattered sunlight, has been used to evaluate a passive spaceborne remote sensing technique for measuring winds in the troposphere and stratosphere. There have been two successful high altitude balloon flights of the prototype UCL instrument from the National Scientific Balloon Facility at Palestine, TE (May 80, Oct. 83). The results from these flights have demonstrated that an interferometer with adequate resolution, stability and sensitivity can be built. The wind data are of comparable quality to those obtained from operational techniques (balloon and rocket sonde, cloud-top drift analysis, and from the gradient wind analysis of satellite radiance measurements). However, the interferometric data can provide a regular global grid, over a height range from 5 to 50 km in regions of clear air. Between the middle troposphere (5 km) and the upper stratosphere (40 to 50 km), an optimized instrument can make wind measurements over the daylit hemisphere with an accuracy of about 3 to 5 m/sec (2 sigma). It is possible to obtain full height profiles between altitudes of 5 and 50 km, with 4 km height resolution, and a spatial resolution of about 200 km, along the orbit track. Below an altitude of about 10 km, Fraunhofer lines of solar origin are possible targets of the Doppler wind analysis. Above an altitude of 50 km, the weakness of the backscattered solar spectrum (decreasing air density) is coupled with the low absorption crosssection of all atmospheric species in the spectral region up to 800 nm (where imaging photon detectors can be used), causing the along-the-track resolution (or error) to increase beyond values useful for operational purposes. Within the region of optimum performance (5 to 50 km), however, the technique is a valuable potential complement to existing wind measuring systems and can provide a low cost addition to powerful active (LIDAR) wind measuring systems now under development.

Rees, David↗

NASA NTRS1998

Comparison of Response Surface and Kriging Models in the Multidisciplinary Design of an Aerospike Nozzle

The use of response surface models and kriging models are compared for approximating non-random, deterministic computer analyses. After discussing the traditional response surface approach for constructing polynomial models for approximation, kriging is presented as an alternative statistical-based approximation method for the design and analysis of computer experiments. Both approximation methods are applied to the multidisciplinary design and analysis of an aerospike nozzle which consists of a computational fluid dynamics model and a finite element analysis model. Error analysis of the response surface and kriging models is performed along with a graphical comparison of the approximations. Four optimization problems are formulated and solved using both approximation models. While neither approximation technique consistently outperforms the other in this example, the kriging models using only a constant for the underlying global model and a Gaussian correlation function perform as well as the second order polynomial response surface models.

Simpson, Timothy W.↗

NASA NTRS1993

Observing Global Ocean Circulation From Space: The First Year's Results From the TOPEX/POSEIDON Mission

The joint U.S./France TOPEX/Poseidon satellite was launched on August 10, 1992, and became operational 42 days later. The major goal of the mission is to use a radar altimeter system for making precise measurements of the height of the sea surface for the study of the dynamics of large-scale ocean circulation, which is a key to understanding global climate change. Additionally, the data are used for studying ocean tides and marine geophysics. The radar altimeter also measures wave height and wind speed. The mission is being conducted to optimize the sea surface height measurements for a minimum of three years. The primary objective of the first six months of the mission was to calibrate and validate the mission's measurements. The verification results indicate that all the measurement objectives have been met...

Fu, L. -L.↗

NASA NTRS1993

Observing Global Ocean Circulation From Space: The First Year's Results From the TOPEX/POSEIDON Mission

The joint U.S./France TOPEX/Poseidon satellite was launched on August 10, 1992, and became operational 43 days later. The major goal of the mission is to use a radar altimeter system for making precise measurements of the height of the sea surface for the study of the dynamics of large-scale ocean circulation, which is a key to understanding global climate change. Additionally, the data are used for studying ocean tides and marine geophysics. The radar altimeter also measures wave height and wind speed. The mission is being conducted to optimize the sea surface height measurements for a minimum of three years. The primary objective of the first six months of the mission was to calibrate and validate the mission's measurements...

Fu, L. -L.↗

NASA NTRS2002

Application of the generalized vertical coordinate ocean model for better representing satellite data

It is found that two adaptive parametric functions can be introduced into the basic ocean equations for utilizing the optimal or hybrid features of commonly used z-level, terrain- following, isopycnal, and pressure coordinates in numerical ocean models. The two parametric functions are formulated by combining three techniques: the arbitrary vertical coordinate system of Kasahara (1 974), the Jacobian pressure gradient formulation of Song (1 998), and a newly developed metric factor that permits both compressible (non-Boussinesq) and incompressible (Boussinesq) approximations. Based on the new formulation, an adaptive modeling strategy is proposed and a staggered finite volume method is designed to ensure conservation of important physical properties and numerical accuracy. Implementation of the combined techniques to SCRUM (Song and Haidvogel1994) shows that the adaptive modeling strategy can be applied to any existing ocean model without incurring computational expense or altering the original numerical schemes. Such a generalized coordinate model is expected to benefit diverse ocean modelers for easily choosing optimal vertical structures and sharing modeling resources based on a common model platform. Several representing oceanographic problems with different scales and characteristics, such as coastal canyons, basin-scale circulation, and global ocean circulation, are used to demonstrate the model's capability for multiple applications. New results show that the model is capable of simultaneously resolving both Boussinesq and non-Boussinesq, and both small- and large-scale processes well. This talk will focus on its applications of multiple satellite sensing data in eddy-resolving simulations of Asian Marginal Sea and Kurosio. Attention will be given to how Topex/Poseidon SSH, TRMM SST; and GRACE ocean bottom pressure can be correctly represented in a non- Boussinesq model.

numerical ocean model generalized coordinate syste↗

NASA NTRS2013

Ionospheric Simulation System for Satellite Observations and Global Assimilative Model Experiments - ISOGAME

Modeling and imaging the Earth's ionosphere as well as understanding its structures, inhomogeneities, and disturbances is a key part of NASA's Heliophysics Directorate science roadmap. This invention provides a design tool for scientific missions focused on the ionosphere. It is a scientifically important and technologically challenging task to assess the impact of a new observation system quantitatively on our capability of imaging and modeling the ionosphere. This question is often raised whenever a new satellite system is proposed, a new type of data is emerging, or a new modeling technique is developed. The proposed constellation would be part of a new observation system with more low-Earth orbiters tracking more radio occultation signals broadcast by Global Navigation Satellite System (GNSS) than those offered by the current GPS and COSMIC observation system. A simulation system was developed to fulfill this task. The system is composed of a suite of software that combines the Global Assimilative Ionospheric Model (GAIM) including first-principles and empirical ionospheric models, a multiple- dipole geomagnetic field model, data assimilation modules, observation simulator, visualization software, and orbit design, simulation, and optimization software.

Pi, Xiaoqing↗

NASA NTRS2013

Downscaling Satellite Precipitation with Emphasis on Extremes: A Variational 1-Norm Regularization in the Derivative Domain

The increasing availability of precipitation observations from space, e.g., from the Tropical Rainfall Measuring Mission (TRMM) and the forthcoming Global Precipitation Measuring (GPM) Mission, has fueled renewed interest in developing frameworks for downscaling and multi-sensor data fusion that can handle large data sets in computationally efficient ways while optimally reproducing desired properties of the underlying rainfall fields. Of special interest is the reproduction of extreme precipitation intensities and gradients, as these are directly relevant to hazard prediction. In this paper, we present a new formalism for downscaling satellite precipitation observations, which explicitly allows for the preservation of some key geometrical and statistical properties of spatial precipitation. These include sharp intensity gradients (due to high-intensity regions embedded within lower-intensity areas), coherent spatial structures (due to regions of slowly varying rainfall),and thicker-than-Gaussian tails of precipitation gradients and intensities. Specifically, we pose the downscaling problem as a discrete inverse problem and solve it via a regularized variational approach (variational downscaling) where the regularization term is selected to impose the desired smoothness in the solution while allowing for some steep gradients(called 1-norm or total variation regularization). We demonstrate the duality between this geometrically inspired solution and its Bayesian statistical interpretation, which is equivalent to assuming a Laplace prior distribution for the precipitation intensities in the derivative (wavelet) space. When the observation operator is not known, we discuss the effect of its misspecification and explore a previously proposed dictionary-based sparse inverse downscaling methodology to indirectly learn the observation operator from a database of coincidental high- and low-resolution observations. The proposed method and ideas are illustrated in case studies featuring the downscaling of a hurricane precipitation field.

Hurricanes↗

NASA NTRS2017

Genetic Algorithm-Guided, Adaptive Model Order Reduction of Flexible Aircrafts

This paper presents a methodology for automated model order reduction (MOR) of flexible aircrafts to construct linear parameter-varying (LPV) reduced order models (ROM) for aeroservoelasticity (ASE) analysis and control synthesis in broad flight parameter space. The novelty includes utilization of genetic algorithms (GAs) to automatically determine the states for reduction while minimizing the trial-and-error process and heuristics requirement to perform MOR; balanced truncation for unstable systems to achieve locally optimal realization of the full model; congruence transformation for "weak" fulfillment of state consistency across the entire flight parameter space; and ROM interpolation based on adaptive grid refinement to generate a globally functional LPV ASE ROM. The methodology is applied to the X-56A MUTT model currently being tested at NASA/AFRC for flutter suppression and gust load alleviation. Our studies indicate that X-56A ROM with less than one-seventh the number of states relative to the original model is able to accurately predict system response among all input-output channels for pitch, roll, and ASE control at various flight conditions. The GA-guided approach exceeds manual and empirical state selection in terms of efficiency and accuracy. The adaptive refinement allows selective addition of the grid points in the parameter space where flight dynamics varies dramatically to enhance interpolation accuracy without over-burdening controller synthesis and onboard memory efforts downstream. The present MOR framework can be used by control engineers for robust ASE controller synthesis and novel vehicle design.

Numerical Analysi↗