Search NASA⌕ Search

SEARCH · Search NASA

Results for “interactive model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Interaction strength and model geometry effects on the structure of crossing-shock wave/turbulent boundary-layer interactions

The flowfield structure of a range of symmetric crossing-shock wave/turbulent boundary-layer interactions of varying strength is presented. The test geometry, consisting of a symmetric pair of opposing sharp fins at angle of attack, alpha, mounted to a flat plate, is studied experimentally for a range of alpha from 7 to 15 degrees at Mach numbers of 3 and 4. Results reveal that the basic flowfield shock structure remains similar in nature over the range of interaction strengths examined, with the only changes being in the scale and location of the various features present. The separated flow regions are classified as being either completely or partially separated, the completely separated case being the one in which the entire incoming boundary layer separates from the plate surface. For the current experiments, all but the weakest of the interactions exhibited complete boundary layer separation. Finally, the effects of model geometry are analyzed by comparing data for shock generators of varying lengths, with the results showing no evidence of upstream influence due to the shock generator trailing edges.

Garrison, T. J.↗

Modeling Plant Nutrient Acquisition Strategies Alters Projections of Carbon and Nitrogen Dynamics in Bioenergy Agroecosystems

Plant strategies to acquire nutrients from limited environments help shape ecosystem carbon (C) and nitrogen (N) cycling and response to environmental change. The effects of plant strategies on ecosystem dynamics are largely uncharacterized in bioenergy agroecosystems, where the impacts could determine bioenergy's ability to meet its sustainability goals of storing C and reducing N loss. We used FUN-BioCROP (Fixation and Uptake of Nitrogen-Bioenergy Carbon, Rhizosphere, Organisms and Protection), a plant–microbe interaction model of coupled plant nutrient uptake and soil organic matter decomposition, to simulate the effects of nutrient acquisition strategies on soil microbial activity and ecosystem nutrient cycling in bioenergy feedstocks miscanthus (Miscanthus × giganteus) and sorghum (Sorghum bicolor (L.) Moench). We examined the model's ability to reproduce the relative effects of belowground nutrient uptake on microbial activity using a reanalysis of empirical data showing that miscanthus root exudation provoked a larger soil microbial response than sorghum. From baseline model simulations, we found that the ability of miscanthus to retranslocate N resulted in higher N uptake at a lower C cost than the sorghum/soybean rotation and that soil C and N pools increased under perennial (miscanthus) and decreased under annual (sorghum/soybean) cultivation. The model also predicted that greater root exudation increased soil C accumulation, highlighting the role of roots in forming stable soil C. Overall, the baseline model was unable to reproduce field observations of miscanthus root exudation stimulating microbial activity more than sorghum. To improve the model, we updated the soil microbial parameters in miscanthus to have faster decomposition, a higher C/N ratio, and greater carbon use efficiency. These changes improved the simulated soil microbial response to miscanthus root exudation, supporting the hypothesis that miscanthus soils foster a microbial community that is more responsive to root exudation than that of sorghum.

09 BIOMASS FUELS↗

Fracture Propagation and Permeability Change under Poro-thermoelastic Loads & Silica Reactivity in Enhanced Geothermal Systems

Geothermal energy is recovered by circulating water through heat exchange areas within a hot rock mass. Geothermal reservoir rock masses generally consist of igneous and metamorphic rocks that have low matrix permeability. Therefore, cracks and fractures play a significant role in extraction of geothermal energy by providing the major pathways for fluid flow and heat exchange. Therefore, knowledge of the conditions leading to formation of fractures and fracture networks is of paramount importance. Furthermore, in the absence of natural fractures or adequate connectivity, artificial fractures are created in the reservoir using hydraulic fracturing. Multiple fractures are preferred because of the large size necessary when using only a single fracture. Although the basic idea is rather simple, hydraulic fracturing is a complex process involving interactions of high pressure fluid injections with a stressed hot rock mass, mechanical interaction of induced fractures with existing natural fractures, and the spatial and temporal variations of in-situ stress. As a result, it is necessary to develop tools that can be used to study these interactions as an integral part of a comprehensive approach to geothermal reservoir development, particularly enhanced geothermal systems. In response to this need we have developed advanced poro-thermo-chemo-mechanical fracture models for rock fracture research in support of EGS design. The fracture propagation models are based on a regular displacement discontinuity formulation. The fracture propagation studies include modeling interaction of induced fractures. In addition to the fracture propagation studies, two-dimensional solution algorithms have been developed and used to estimate the impact of pro-thermo-chemical processes on fracture permeability and reservoir pressure. Fracture permeability variation is studied using a coupled thermo-chemical model with quartz reaction kinetics. The model is applied to study quartz precipitation/dissolution, as well as the variation in fracture aperture and pressure. Also, a three-dimensional model of injection/extraction has been developed to consider the impact poro- and thermoelastic stresses on fracture slip and injection pressure. These investigations shed light on the processes involved in the observed phenomenon of injection pressure variation (e.g., in Coso), and allow the assessment of the potential of thermal and chemical stimulation strategies.

15 GEOTHERMAL ENERGY↗

Shell-Model Calculations of f p-shell Nuclei with Realistic NN Interactions

Shell model calculations have been carried out to study the structure and decay properties of nuclei in the f p shell. The shell-model effective Hamiltonian is constructed from the high-precision CD-Bonn NN potential using the folded-diagram renormalization method without any empirical modification. The Hamiltonian gives a reasonable description of spectroscopic properties in nuclei around the N = Z line.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cluster-Graph Fingerprinting: A Framework for Quantitative Analysis of Machine-Learned Interatomic Model Training and Simulation Data

Machine-learned interatomic models represent a significant advancement in simulation methods, extending the predictive ability of first-principles methods to previously inaccessible length and time scales. However, the data-driven nature of these models can lead to difficult-to-detect errors that can compromise prediction accuracy. To address this challenge, we introduce a novel fingerprinting approach based on the Chebyshev Interaction Model for Efficient Simulation (ChIMES) ML-IAM graph-based descriptor. Our strategy enables efficient and statistically rigorous analysis of system configurations used in ML-IAM training and those generated by their application, e.g., in molecular dynamics simulations. We demonstrate that these fingerprints can effectively assess novelty of a configuration relative to an existing data set and determine dissimilarity among individual configurations, which are two key tasks in workflows for active learning-based ML-IAM training, data set curation, and on-the-fly uncertainty quantification.

36 MATERIALS SCIENCE↗

Multiphysics modeling of mesh piezoelectric atomizers

An ultrasonic clothes dryer was developed by researchers at Oak Ridge National Laboratory based on a novel approach of using high-frequency mechanical vibration instead of heat to extract moisture as a cold mist. This technology is based on direct mechanical coupling between mesh piezoelectric (PZT) transducers and wet fabric. The vibration introduces sufficient momentum to the droplets trapped in the fabric pores to atomize them and leave the garment in a cold state. In the vibrating transducer, deformation followed by the effects of boundary layer acoustic streaming results in ejection of the atomized droplets. The research presented bridges the vibration of a PZT mesh transducer to the induced acoustic field and to capillary-wave theory. Mathematical modeling studies free and forced vibrations of a mesh-like PZT structure, using the structural parameters identified by actuation testing in several case studies. Computational fluid–structure interaction modeling is performed to couple the vibrations of a PZT transducer with an in-contact droplet. The results obtained are used to investigate (1) the transverse deformation of the vibrating mesh transducer in contact with a droplet, (2) the resultant boundary layer acoustic streaming in the fluid surrounding the vibrating surface, and (3) the droplet deformation and fluid ejection. The physics of atomization are linked to the level of the near-wall droplet vibrations induced by the surface deformation of the transducer. Then the surface deformation is linked to the properties of the PZT mesh transducer and input actuation frequency and power.

Dupuis, Eric↗

CoMD Implementation Suite in Emerging Programming Models

CoMD-Em is a software implementation suite of the CoMD [4] proxy app using different emerging programming models. It is intended to analyze the features and capabilities of novel programming models that could help ensure code and performance portability and scalability across heterogeneous platforms while improving programmer productivity. Another goal is to provide the authors and venders with some meaningful feedback regarding the capabilities and limitations of their models. The actual application is a classical molecular dynamics (MD) simulation using either the Lennard-Jones method (LJ) or the embedded atom method (EAM) for primary particle interaction. The code can be extended to support alternate interaction models. The code is expected ro run on a wide class of heterogeneous hardware configurations like shard/distributed/hybrid memory, GPU's and any other platform supported by the underlying programming model.

Haque, Riyaz↗

A Variational Formulation for the Finite Element Analysis of Sound Wave Propagation in a Spherical Shell

Development of design tools to furnish optimal acoustic environments for lightweight aircraft demands the ability to simulate the acoustic system on a workstation. In order to form an effective mathematical model of the phenomena at hand, we have begun by studying the propagation of acoustic waves inside closed spherical shells. Using a fully-coupled fluid-structure interaction model based upon variational principles, we have written a finite element analysis program and are in the process of examining several test cases. Future investigations are planned to increase model accuracy by incorporating non-linear and viscous effects.

Lebiedzik, Catherine↗

CoMD Implementation Suite in Emerging Programming Models

CoMD-Em is a software implementation suite of the CoMD [4] proxy app using different emerging programming models. It is intended to analyze the features and capabilities of novel programming models that could help ensure code and performance portability and scalability across heterogeneous platforms while improving programmer productivity. Another goal is to provide the authors and venders with some meaningful feedback regarding the capabilities and limitations of their models. The actual application is a classical molecular dynamics (MD) simulation using either the Lennard-Jones method (LJ) or the embedded atom method (EAM) for primary particle interaction. The code can be extended to support alternate interaction models. The code is expected ro run on a wide class of heterogeneous hardware configurations like shard/distributed/hybrid memory, GPU's and any other platform supported by the underlying programming model.

Haque, Riyaz↗

Muon Neutrino Charged Current Single Pion Production on Various Targets in the MINERvA Detector

Measurements of neutrino oscillation parameters at accelerator-based experiments require precise knowledge of neutrino interaction cross sections. A significant fraction of neutrino interactions observed in these experiments produce single charged pions. While single charged pion production has been measured on hydrocarbon and water, few precise measurements exist for heavier targets, and there are no high statistics measurements that directly compare pion production on different targets. This thesis measures differential cross sections of muon neutrino charged current single charged pion production with no other mesons in the final state in a neutrino beam with a mean energy of $\approx 6$ GeV. The pion production is studied on targets of scintillator, carbon, water, iron, and lead at MINERvA, a neutrino cross section experiment located in the NuMI beamline at Fermilab. These measured cross sections are differential in $\mu^-$ and $\pi^+$ kinematics. A strong suppression of low $Q^2 $ and an enhancement of low $T_\pi$ are observed relative to commonly used neutrino interaction models in both the light and heavy nuclear targets. Incorporation of these observed effects in future neutrino oscillation experiments will improve their ability to measure energy of neutrino interactions, and therefore measure the parameters governing neutrino oscillations.

Bercellie, Aaron↗

Muon neutrino charged current single pion production on various targets in the MINERvA detector

Measurements of neutrino oscillation parameters at accelerator-based experiments require precise knowledge of neutrino interaction cross sections. A significant fraction of neutrino interactions observed in these experiments produce single charged pions. While single charged pion production has been measured on hydrocarbon and water, few precise measurements exist for heavier targets, and there are no high statistics measurements that directly compare pion production on different targets. This thesis measures differential cross sections of muon neutrino charged current single charged pion production with no other mesons in the final state in a neutrinobeam with a mean energy of ≈ 6 GeV. The pion production is studied on targets of scintillator, carbon, water, iron, and lead at MINERvA, a neutrino cross section experiment located in the NuMI beamline at Fermilab. These measured cross sections are differential in μ - and π + kinematics. A strong suppression of low Q 2 and an enhancement of low π are observed relative to commonly used neutrino interaction models in both the light and heavy nuclear targets. Incorporation of these observed effects in future neutrino oscillation experiments will improve their ability to measure energy of neutrino interactions, and therefore measure the parameters governing neutrino oscillations.

Bercellie, Aaron↗

On the continuity of mean total normal stress in geometrical multiscale cardiovascular problems

In this work an iterative strategy to implicitly couple dimensionally-heterogeneous blood flow models accounting for the continuity of mean total normal stress at interface boundaries is developed. Conservation of mean total normal stress in the coupling of heterogeneous models is mandatory to satisfy energetic consistency between them. Nevertheless, existing methodologies are based on modifications of the Navier–Stokes variational formulation, which are undesired when dealing with fluid–structure interaction or black box codes. The proposed methodology makes possible to couple one-dimensional and three-dimensional fluid–structure interaction models, enforcing the continuity of mean total normal stress while just imposing flow rate data or even the classical Neumann boundary data to the models. This is accomplished by modifying an existing iterative algorithm, which is also able to account for the continuity of the vessel area, when required. Comparisons are performed to assess differences in the convergence properties of the algorithms when considering the continuity of mean normal stress and the continuity of mean total normal stress for a wide range of flow regimes. Finally, examples in the physiological regime are shown to evaluate the importance, or not, of considering the continuity of mean total normal stress in hemodynamics simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A model of hydrodynamic interaction between swimming bacteria.

We study the dynamics and interaction of two swimming bacteria, modeled by self-propelled dumbbell-type structures. We focus on alignment dynamics of a coplanar pair of elongated swimmers, which propel themselves either by 'pushing' or 'pulling' both in three- and quasi-two-dimensional geometries of space. We derive asymptotic expressions for the dynamics of the pair, which complemented by numerical experiments, indicate that the tendency of bacteria to swim in or swim off depends strongly on the position of the propulsion force. In particular, we observe that positioning of the effective propulsion force inside the dumbbell results in qualitative agreement with the dynamics observed in experiments, such as mutual alignment of converging bacteria.

59 BASIC BIOLOGICAL SCIENCES↗

Application of Artificial Intelligence/Machine Learning to Operations Research

This report examines the transformative impact of Artificial Intelligence (AI) and Machine Learning (ML) on operations research, private industry, and government sectors, highlighting their applications in automating processes, enhancing decision-making, and optimizing complex systems. AI/ML technologies have revolutionized industries through predictive maintenance, supply chain optimization, and autonomous systems, while also advancing public safety and defense operations. However, challenges such as data integrity, model transparency, and the need for human oversight persist, particularly in high-consequence environments. The report emphasizes the critical role of explainable AI (XAI) and human-computer interaction models like Human-in-the-Loop (HITL) and Human-on-the-Loop (HOTL) in fostering trust and accountability. Balancing automation with ethical responsibility and transparency is essential for the continued successful integration of AI/ML into operational and strategic decision-making frameworks.

97 MATHEMATICS AND COMPUTING↗

Multidimensional Models of Type Ia Supernova Nebular Spectra: Strong Emission Lines from Stripped Companion Gas Rule Out Classic Single-degenerate Systems

The classic single-degenerate model for the progenitors of Type Ia supernova (SN Ia) implies that the supernova ejecta should be enriched with solar-like abundance material stripped from the companion star. Spectroscopic observations of normal SNe Ia at late times, however, have not resulted in definite detection of hydrogen. In this Letter, we study line formation in SNe Ia at nebular times using non-LTE spectral modeling. We introduce, for the first time, multidimensional radiative transfer calculations of SNe Ia with stripped material mixed in the ejecta core, based on hydrodynamical simulations of ejecta–companion interaction. We suggest that interaction models with main-sequence companions produce significant Hα emission at late times, ruling out these types of binaries being viable progenitors of SNe Ia. We also predict significant He i line emission at optical and near-infrared wavelengths for both hydrogen-rich or helium-rich material, providing an additional observational probe of stripped ejecta. We produce models with reduced stripped masses and find a more stringent mass limit of M st ≲ 1 × 10 -4 M ⊙ of stripped companion material for SN 2011fe.

79 ASTRONOMY AND ASTROPHYSICS↗

Validation of Actuator Disk, Actuator Line and Sliding Mesh Methods within the LAVA Solver

In this study the implementation of actuator-disk, actuator-line and sliding-mesh methodologies in the Launch Ascent and Vehicle Aerodynamics (LAVA) solver is described and validated against several test-cases. The different models are validated against available numerical as well as experimental data. Both steady and unsteady Reynolds-Averaged Navier-Stokes (RANS) simulations using the Spallart Allmaras (SA) turbulence model are performed for several different configurations representative of aeroscience applications. The first part of the paper is focused on the verification and validation of the implemented propulsor models. The first validation case is a theoretical rotor in hover, compared with the 1D analytical solution derived from momentum theory. The second validation is the Rotor-Airframe Interaction Model of Georgia Institute of Technology (GIT), representing the application of actuator disks to top-mounted rotorcraft vehicles or unmanned aerial vehicles (UAVs). The third case is a representative configuration for tip-mounted rotor-craft vehicles such as NASA’s X57 airplane. The second part of the paper shows the implemented models applied to realistic engineering configurations such as NASA’s X57 airplane and the R4 Advanced Ducted Propellor (ADT). A modification to the actuator line method in order to represent the blade geometry more closely is proposed and comparisons with simulations modeling the blade utilizing a sliding-mesh approach are made.

ARMD↗

On a class of scaling FRW cosmological models

We study Friedmann-Robertson-Walker cosmological models with matter content composed of two perfect fluids ρ{sub 1} and ρ{sub 2}, with barotropic pressure densities p{sub 1}/ρ{sub 1} = ω{sub 1} = const and p{sub 2}/ρ{sub 2} = ω{sub 2} = const, where one of the energy densities is given by ρ{sub 1} = C{sub 1}a{sup α}+C{sub 2}a{sup β}, with C{sub 1}, C{sub 2}, α and β taking constant values. We solve the field equations by using the conservation equation without breaking it into two interacting parts with the help of a coupling interacting term Q. Nevertheless, with the found solution may be associated an interacting term Q, and then a number of cosmological interacting models studied in the literature correspond to particular cases of our cosmological model. Specifically those models having constant coupling parameters α-tilde , β-tilde and interacting terms given by Q = α-tilde Hρ{sub D{sub M}}, Q = α-tilde Hρ{sub D{sub E}}, Q = α-tilde H(ρ{sub D{sub M}}+ρ{sub D{sub E}}) and Q = α-tilde Hρ{sub D{sub M}}+β-tilde Hρ{sub D{sub E}}, where ρ{sub D{sub M}} and ρ{sub D{sub E}} are the energy densities of dark matter and dark energy respectively. The studied set of solutions contains a class of cosmological models presenting a scaling behavior at early and at late times. On the other hand the two-fluid cosmological models considered in this paper also permit a three fluid interpretation which is also discussed. In this reinterpretation, for flat Friedmann-Robertson-Walker cosmologies, the requirement of positivity of energy densities of the dark matter and dark energy components allows the state parameter of dark energy to be in the range −1.37∼<ω{sub D{sub E}} < −1/3.

79 ASTRONOMY AND ASTROPHYSICS↗

Consistent LDA' + DMFT approach to the electronic structure of transition metal oxides: Charge transfer insulators and correlated metals

We discuss the recently proposed LDA' + DMFT approach providing a consistent parameter-free treatment of the so-called double counting problem arising within the LDA + DMFT hybrid computational method for realistic strongly correlated materials. In this approach, the local exchange-correlation portion of the electron-electron interaction is excluded from self-consistent LDA calculations for strongly correlated electronic shells, e.g., d-states of transition metal compounds. Then, the corresponding double-counting term in the LDA' + DMFT Hamiltonian is consistently set in the local Hartree (fully localized limit, FLL) form of the Hubbard model interaction term. We present the results of extensive LDA' + DMFT calculations of densities of states, spectral densities, and optical conductivity for most typical representatives of two wide classes of strongly correlated systems in the paramagnetic phase: charge transfer insulators (MnO, CoO, and NiO) and strongly correlated metals (SrVO{sub 3} and Sr{sub 2}RuO{sub 4}). It is shown that for NiO and CoO systems, the LDA' + DMFT approach qualitatively improves the conventional LDA + DMFT results with the FLL type of double counting, where CoO and NiO were obtained to be metals. Our calculations also include transition-metal 4s-states located near the Fermi level, missed in previous LDA + DMFT studies of these monoxides. General agreement with optical and the X-ray experiments is obtained. For strongly correlated metals, the LDA' + DMFT results agree well with the earlier LDA + DMFT calculations and existing experiments. However, in general, LDA' + DMFT results give better quantitative agreement with experimental data for band gap sizes and oxygen-state positions compared to the conventional LDA + DMFT method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗