Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Crystal structure of Kuzel's salt 3CaO.Al{sub 2}O{sub 3}.1/2CaSO{sub 4}.1/2CaCl{sub 2}.11H{sub 2}O determined by synchrotron powder diffraction

The crystal structure of Kuzel's salt has been successfully determined by synchrotron powder diffraction. It crystallizes in the rhombohedral R3-bar symmetry with a = 5.7508 (2) A, c = 50.418 (3) A, V = 1444.04 (11) A{sup 3}. Joint Rietveld refinement was realized using three X-ray powder patterns recorded with a unique wavelength and three different sample-to-detector distances. Kuzel's salt is the chloro-sulfoaluminate AFm phase and belongs to the layered double hydroxide (LDH) large family. Its structure is composed of positively charged main layer [Ca{sub 2}Al(OH){sub 6}]{sup +} and negatively charged interlayer [Cl{sub 0.50}.(SO{sub 4}){sub 0.25}.2.5H{sub 2}O]{sup -}. Chloride and sulfate anions are ordered into two independent crystallographic sites and fill successive interlayer leading to the formation of a second-stage compound. The two kinds of interlayer have the compositions [Cl.2H{sub 2}O]{sup -} and [(SO{sub 4}){sub 0.5}.3H{sub 2}O]{sup -}. The crystal structure explains why chloride and sulfate anions are not substituted and why the formation of extended solid solution in the chloro-sulfate AFm system does not occur.

36 MATERIALS SCIENCE↗

The roles of yield strength mismatch, interface strength, and plastic strain gradients in fatigue crack growth across interfaces

An irreversible cohesive zone model was used to understand how plastic strain gradients and yield strength mismatches affect fatigue crack growth across bi-material and multilayer interfaces for a range of interface strengths. Parametric studies identified regimes of penetration through the interface, deflection into the interface, and a transition where cracks extend on both paths. Plastic strain gradients strongly influence the transition regime, and a yield strength mismatch is necessary to cause deflection. For crack growth across an interlayer, interactions between the interfaces occur when the crack-tip plastic zone spans the interlayer. Plastic strain gradients promote penetration through the interlayer.

42 ENGINEERING↗

Hydrogen adsorption and transport in clay-rich geomaterials: Implications for large-volume underground hydrogen storage

Depleted oil and gas reservoirs, characterized by impermeable clay-rich caprocks, are promising sites for large-scale underground hydrogen storage (UHS), which is a key strategy to support hydrogen-based energy systems. However, experimental data on hydrogen storage in clay-rich geomaterials remain scarce. In this work, we experimentally investigated hydrogen adsorption and migration in clay-rich geomaterials in the presence of nitrogen and water under controlled temperatures. Experimental observations showed that hydrogen was adsorbed in dry illite. A dual-porosity transport model was developed to interpret hydrogen transport between large-pore and small-pore domains in illite. The large-pore domain is the space between clay particles (i.e., inter-particle space), whereas the small-pore domain is the nanoscale pore space between clay mineral layers (i.e., inter-layer or intra-particle space). In contrast, nitrogen showed no evidence of adsorption in dry illite because it cannot move into the small-pore domain due to the relatively large kinetic diameter, referred to as the molecular sieving effect. Here, we found that 0.7–1.3 nm is the length scale regulating this molecular sieving effect, matching the interlayer spacing in illite, suggesting that nitrogen is a promising cushion gas in UHS, which aims to maintain adequate pressure in the reservoir for economic operations. In wetted illite, hydrogen was not adsorbed into the interlayer space due to the occupation of adsorption sites by interlayer water, which highlights the critical role of the clay hydration state in controlling hydrogen-clay interactions. Additionally, hydrogen adsorption experiments on crushed shale indicated that the shale surface possessed adsorption sites more favorable for hydrogen than for nitrogen. Through these experiments, we provide new insights into hydrogen storage mechanisms in clay-rich geomaterials and offer valuable laboratory data for evaluating the performance of large-scale UHS systems.

Adsorption↗

Weathering of chlorite from grain to watershed: The role and distribution of oxidation reactions in the subsurface

The reaction mechanism of weathering of chlorite, an important rock-forming phyllosilicate, is not well understood in natural settings. Here, in this work we investigated the weathering of Fe-rich chlorite from deep protolith to saprock to soil across a small shale-underlain watershed in the Appalachian Mountains, USA (Shale Hills). We found that oxidation of Fe(II) in chlorite always occurs prior to dissolution of the interlayers of the mineral. The oxidation of pyrite and chlorite commence near the water table across narrow depth intervals under the upper-catchment ridges, but well below the water table across wide depth intervals under the valley. We hypothesize that these patterns can be explained by hydrological and geochemical differences between the ridge and the valley: oxygenated water descends sub-vertically (1D flow) under the ridge, while under the valley, oxygen-depleted water moves upward to the stream and laterally out of the watershed in the subsurface (3D flow). Geochemical and mineralogical characterization indicates that the transformation of Fe-rich chlorite at Shale Hills is initiated by the oxidation of Fe(II). Next, the interlayer hydroxide sheet dissolves to form hydroxy-interlayered vermiculite and then vermiculite. During the transformation, Mg and Fe are released into solution and Fe is reprecipitated as goethite in pore space. Delivery of oxygen to the deep subsurface by infiltration of meteoric water is thought to control the initial transformation of chlorite at Shale Hills. It is possible that weathering of many Fe(II)-rich minerals is initiated by oxidation as mediated by rates of subsurface oxygen delivery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence for a short-range chemical order of Ge atoms and its critical role in inducing a giant magnetocaloric effect in Gd 5 Si 1.5 Ge 2.5

Crystal structure and magnetic properties of Gd 5 Si 1.5 Ge 2.5 and Gd 4.9 Zr 0·1 Si 1.5 Ge 2.5 were investigated using high-energy X-ray diffraction and magnetic measurements. Results showed that a Zr substitution for 2% Gd reduces unit cell volumes of a room-temperature monoclinic and a low-temperature orthorhombic lattice and a difference between them at a magnetostructural transition. At a microscopic level, the Zr substitution increases length of disconnected interlayer T–T bonds of the monoclinic lattice at the expense of length of connected interlayer T–T bonds (T = Si, Ge). These opposing changes of the interlayer T–T bonds provided evidence for existence of a short-range chemical order of Ge atoms in lattices of Gd 5 Si 1.5 Ge 2.5 and its weakening by the Zr substitution. Magnetic measurements revealed that the Zr substitution brings about a change of the magnetic structure and a reduction of a giant magnetocaloric effect of Gd 5 Si 1.5 Ge 2.5 . Based on such structural and magnetic changes due to the Zr substitution, we propose a relation between the short-range chemical order and the total entropy change at the magnetostructural transition. Finally, using this relation, a giant magnetocaloric effect and an annealing effect observed over a wide range of Gd 5 (Si,Ge) 4 composition can be explained quantitatively.

36 MATERIALS SCIENCE↗

Molecular dynamics simulations of cesium adsorption on illite nanoparticles

Here we present that the charged surfaces of micaceous minerals, especially illite, regulate the mobility of the major radioisotopes of Cs ( 134 Cs, 135 Cs, 137 Cs) in the geosphere. Despite the long history of Cs adsorption studies, the nature of the illite surface sites remains incompletely understood. To address this problem, we present atomistic simulations of Cs competition with Na for three candidate illite adsorption sites – edge, basal plane, and interlayer. Our simulation results are broadly consistent with affinities and selectivities that have been inferred from surface complexation models. Cation exchange on the basal planes is thermodynamically ideal, but exchange on edge surfaces and within interlayers shows complex, thermodynamically non-ideal behavior. The basal planes are weakly Cs-selective, while edges and interlayers have much higher affinity for Cs. The dynamics of Na-Cs exchange are rapid for both cations on the basal planes, but considerably slower for Cs localized on edge surfaces. Lastly, in addition to new insights into Cs adsorption and exchange with Na on illite, we report the development of a methodology capable of simulating fully-flexible clay mineral nanoparticles with stable edge surfaces using a well-tested interatomic potential model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid chemistry of the Zn{sup II}/1,2,4-triazolate/anion system: Separation of 2D isoreticular layers tuned by the terminal counteranions X (X=Cl{sup -}, Br{sup -}, I{sup -}, SCN{sup -})

An array of 2D isoreticular layers, viz. [Zn(atrz)X]{sub {infinity}} (1.X; X=Cl{sup -}, Br{sup -}, I{sup -}; atrz=3-amino-1,2,4-triazole anion), [Zn{sub 4}(atrz){sub 4}(SCN){sub 4}.H{sub 2}O]{sub {infinity}} (1.SCN.H{sub 2}O) and [Zn(trz)X]{sub {infinity}} (2.X; X=Cl{sup -}, Br{sup -}, I{sup -}; trz=1,2,4-triazole anion), have been hydrothermally synthesized and structurally characterized. Compounds 1.X and 1.SCN.H{sub 2}O are constructed from binuclear planar Zn{sub 2}(atrz){sub 2} subunits and exhibit (4,4) topological network when the subunits are simplified as four-connected nodes. Based on changing the terminal counteranions X (X=Cl{sup -}, Br{sup -}, I{sup -}, SCN{sup -}), the average interlayer separations of 1.X and 1.SCN.H{sub 2}O are enlarged, which equal to 5.851, 6.153, 6.651 and 8.292 A, respectively. As a result, H{sub 2}O molecules reside in the spaces between two adjacent layers of 1.SCN.H{sub 2}O. 2 and 1 are the isomorphous structures. In common with 1, the interlayer separations of 2.X are widened with increasing the ion radius. Solid-state luminescence properties and thermogravimetric analyses of 1 and 2 were investigated, respectively. - Graphical Abstract: Based on employing the various terminal counteranions X (X=Cl{sup -}, Br{sup -}, I{sup -}, SCN{sup -}) the average interlayer separations of four 2D isoreticular layer compounds [Zn(atrz)X]{sub {infinity}} are gradually enlarged, which equal to 5.851, 6.153, 6.651 and 8.292 A, respectively. As a result, guest H{sub 2}O molecules reside in the space between two adjacent layers of [Zn{sub 4}(atrz){sub 4}(SCN){sub 4}.H{sub 2}O]{sub {infinity}}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carboxylate-intercalated layered double hydroxides aged under microwave-hydrothermal treatment

Carboxylate-intercalated (terephthalate, TA and oxalate, ox) layered double hydroxides (LDHs) are aged under a microwave-hydrothermal treatment. The influence of the nature of the interlayer anion during the ageing process is studied. Characterization results show that the microwave-hydrothermal method can be extended to synthesize LDHs with anions different than carbonate, like TA. LDH-TA compounds are stable under microwave irradiation for increasing periods of time and the solids show an improved order both in the layers and in the interlayer region as evidenced by powder X-ray diffraction (PXRD), {sup 27}Al MAS NMR and FT-IR spectroscopy. Furthermore, cleaning of the surface through removal of some organic species adsorbed on the surface of the particles also occurs during the microwave-hydrothermal treatment. Conversely, although the expected increase in crystallinity is observed in LDH-ox samples, the side-reaction between Al{sup 3+} and ox is also enhanced under microwave irradiation, and a partial destruction of the structure takes place with an increase in the M{sup 2+}/M{sup 3+} ratio and consequent modification of the cell parameters. - Graphical Abstract: The influence of the nature of the interlayer anion during the ageing process of carboxylate-intercalated (TA and ox) hydrotalcite-like compounds (HTlcs) is studied. Well crystallized for TA-containing compounds were obtained. However, the non-desired side-reaction of ox with the aluminum of the layers is enhanced by the microwaves and a partial destruction of the structure takes place.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and intracrystalline oxidation of nitrite-intercalated layered double hydroxides

Nitrite-intercalated LDHs could be prepared by a two-stage process that involves coprecipitation in the presence of nitrite ions followed by stirring the product with excess of nitrite ions. The nitrite ion lies flat in these LDHs with its c{sub 2}-axis lying approximately perpendicular to the crystallographic c-axis. The interlayer nitrite ions in these LDHs could be quantitatively oxidized to nitrate ions using H{sub 2}O{sub 2} solution. In the LDHs thus obtained the nitrate ion lies flat with its c{sub 3}-axis parallel to the crystallographic c-axis (D{sub 3h} symmetry) in the interlayer region resulting in lower basal spacing. - Graphical abstract: Nitrite-intercalated LDHs could be prepared by a two-stage process that involves coprecipitation in the presence of nitrite ions followed by stirring the product with excess of nitrite ions. The interlayer nitrite ions in these LDHs could be quantitatively oxidized to nitrate ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural characterization of C-S-H and C-A-S-H samples-Part I: Long-range order investigated by Rietveld analyses

Rietveld analyses on samples belonging to C-S-H and C-A-S-H series (0.8<=C/S<=1.7) were realized on X-ray powder patterns. The tobermorite M model was successfully used to refine all the powder patterns from C-S-H samples whatever the C/S value. This gives clear indication on the steady change in a unique structural description, corresponding to a 'tobermorite M defect' model, when passing from C-S-H(I) (C/S<1.0) to C-S-H(II) type (C/S>1.0). The possibility for both C-S-H types (from polymerized silicate chains to isolated silicate dimers) to accommodate the same structural model is explained by the continuous evolution of the occupancies of the cationic sites: the interlayer Ca atoms, the Si atoms from paired and bridging silicates. Accurate refinements of the structural and microstructural parameters evidenced the well crystallized feature of C-S-H phase combined with a small coherent domain size. Insertion of Al atoms in the C-S-H structure (C-A-S-H phase) involves a clear disruption into the layered atomic framework. The large increase of layer spacing observed when incorporating aluminum into C-S-H indicates that Al atoms should be located in the interlayer region of the structure in new crystallographic sites. Aluminum atoms are not substituted silicon crystallographic sites or interlayer calcium crystallographic sites. - Graphical abstract: The Tobermorite M model has been successfully used to perform Rietveld analyses on X-ray powder patterns from C-S-H samples. Refinement of the cationic site occupancies explains the evolution from the linear silicate chains to the isolated silicate dimers when increasing the C/S ratio.

36 MATERIALS SCIENCE↗

A novel nanocomposite material prepared by intercalating photoresponsive dendrimers into a layered double hydroxide

A novel combination for an inorganic-organic nanocomposite material was demonstrated. Anthryl dendron, i.e., poly(amidoamine) dendron with an anthracene chromophore group at the focal point, was incorporated in the interlayer space of ZnAl-NO{sub 3} type layered double hydroxide (LDH) through an anion-exchange reaction. The photoabsorption and fluorescence properties of the resulting material were different from those of the bare anthryl dendron molecule. It was suggested that the change in photochemical properties was due to the organization and pi-pi interaction of anthracene chromophores within the interlayer of the LDH. - Graphical abstract: A novel inorganic-organic nanocomposite material, a layered double hydroxide (LDH) containing photoresponsive dendrimers in the interlayer space, was successfully prepared through an ion-exchange reaction. The resulting material exhibited unique photochemical properties, compared to those of the bare photoresponsive dendrimer molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cr{sup 6+}-containing phases in the system CaO-Al{sub 2}O{sub 3}-CrO{sub 4}{sup 2-}-H{sub 2}O at 23 Degree-Sign C

Synthesis and investigation of lamellar calcium aluminium hydroxy salts was performed to study the incorporation of chromate ions in the interlayer of lamellar calcium aluminium hydroxy salts. Different AFm-phases (calcium aluminate hydrate with alumina, ferric oxide, mono-anion phase) containing chromate were synthesized. These AFm-phases belong to the group of layered double hydroxides (LDHs). 3CaO{center_dot}Al{sub 2}O{sub 3}{center_dot}CaCrO{sub 4}{center_dot}nH{sub 2}O and C{sub 3}A{center_dot}1/2Ca(OH){sub 2}{center_dot}1/2CaCrO{sub 4}{center_dot}12H{sub 2}O were obtained as pure phases and their different distinct interlayer water contents and properties determined. Solid solution of chromate-containing phases and tetracalcium-aluminate-hydrate (TCAH) were studied. The uptake of chromate into TCAH from solutions was proven. Chromate contents in solution decrease to <0.2 mg/l. - Graphical abstract: Chromate can be incorporated in LDH-phases with compositions like: 3CaO{center_dot}Al{sub 2}O{sub 3}{center_dot}1/2CaCrO{sub 4}{center_dot}1/2Ca(OH){sub 2}{center_dot}nH{sub 2}O, 3CaO{center_dot}Al{sub 2}O{sub 3}{center_dot}CaCrO{sub 4}{center_dot}nH{sub 2}O, 3CaO{center_dot}Al{sub 2}O{sub 3}{center_dot}1/6CaCrO{sub 4}.{center_dot}5/6Ca(OH){sub 2}{center_dot}nH{sub 2}O, 3CaO{center_dot}Al{sub 2}O{sub 3}(0-x)CaCrO{sub 4}(1-x) Ca(OH){sub 2}{center_dot}12H{sub 2}O, (0<x<0.17). Highlights: Black-Right-Pointing-Pointer Solid solutions and properties of 3CaO{center_dot}Al{sub 2}O{sub 3}{center_dot}CaCrO{sub 4}{center_dot}nH{sub 2}O and C{sub 3}A{center_dot}1/2 Ca(OH){sub 2}{center_dot}1/2 CaCrO{sub 4}{center_dot}12 H{sub 2}O are given. Black-Right-Pointing-Pointer Different hydrates of Ca-Al-hydroxysalts (LDH) with chromate-anions synthesized and characterized. Black-Right-Pointing-Pointer Interlayer exchange reaction of 2OH{sup -} and CrO{sub 4}{sup 2-} investigated. Black-Right-Pointing-Pointer Thermal dehydration and change of lattice parameters are given

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intercalation chemistry of zirconium 4-sulfophenylphosphonate

Zirconium 4-sulfophenylphosphonate is a layered material which can be employed as a host for the intercalation reactions with basic molecules. A wide range of organic compounds were chosen to represent intercalation ability of zirconium 4-sulfophenylphosphonate. These were a series of alkylamines from methylamine to dodecylamine, 1,4-phenylenediamine, p-toluidine, 1,8-diaminonaphthalene, 1-aminopyrene, imidazole, pyridine, 4,4′-bipyridine, poly(ethylene imine), and a series of amino acids from glycine to 6-aminocaproic acid. The prepared compounds were characterized by powder X-ray diffraction, thermogravimetry analysis and IR spectroscopy and probable arrangement of the guest molecules in the interlayer space of the host is proposed based on the interlayer distance of the prepared intercalates and amount of the intercalated guest molecules. - Graphical abstract: Nitrogen-containing organic compounds can be intercalated into the interlayer space of zirconium 4-sulfophenylphosphonate. - Highlights: • Zirconium 4-sulfophenylphosphonate was examined as a host material in intercalation chemistry. • A wide range of nitrogen-containing organic compounds were intercalated. • Possible arrangement of the intercalated species is described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mapping of reciprocal space of La{sub 0.30}CoO{sub 2} in 3D: Analysis of superstructure diffractions and intergrowths with Co{sub 3}O{sub 4}

We have used electron diffraction tomography and powder X-ray diffraction to elucidate the structural properties of layered cobaltate γ-La{sub 0.30}CoO{sub 2}. The structure consists of hexagonal sheets of edge-sharing CoO{sub 6} octahedra interleaved by lanthanum monolayers. The La{sup 3+} cations occupy only one third of available P2 sites, forming a 2-dimensional a√3×a√3 superstructure in a–b plane. The results show that there exists no order in the mutual relative shift between the neighbouring La interlayers within the a–b plane. This is manifested in the observed monotonous decrease of the diffracted intensity of the superstructure diffractions along c{sup ⁎} in both X-ray and electron diffraction data. The observed lack of stacking order differentiates the La{sub x}CoO{sub 2} from its Ca and Sr analogues where at least a partial stacking order of the cationic interlayers is manifested in experimental data published in literature. - Highlights: • We use electron diffraction tomography for reciprocal space mapping of La{sub 0.30}CoO{sub 2}. • We observed a complete disorder of the stacking of Lanthanum interlayers. • Co{sub 3}O{sub 4} intergrown with La{sub 0.30}CoO{sub 2} crystals brings about fake superstructure diffractions. • Twinning of Co{sub 3}O{sub 4} enhances the problem of fake superstructure diffractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Partial transient liquid phase diffusion bonding of Zircaloy-4 to stabilized austenitic stainless steel 321

An innovative method was applied for bonding Zircaloy-4 to stabilized austenitic stainless steel 321 using an active titanium interlayer. Specimens were joined by a partial transient liquid phase diffusion bonding method in a vacuum furnace at different temperatures under 1 MPa dynamic pressure of contact. The influence of different bonding temperatures on the microstructure, microindentation hardness, joint strength and interlayer thickness has been studied. The diffusion of Fe, Cr, Ni and Zr has been investigated by scanning electron microscopy and energy dispersive spectroscopy elemental analyses. Results showed that control of the heating and cooling rate and 20 min soaking at 1223 K produces a perfect joint. However, solid-state diffusion of the melting point depressant elements into the joint metal causes the solid/liquid interface to advance until the joint is solidified. The tensile strength of all the bonded specimens was found around 480-670 MPa. Energy dispersive spectroscopy studies indicated that the melting occurred along the interface of the bonded specimens as a result of the transfer of atoms between the interlayer and the matrix during bonding. This technique provides a reliable method of bonding zirconium alloy to stainless steel.

36 MATERIALS SCIENCE↗

Fabrication, microstructure, and wear performance of WC-Fe composite/metal coating fabricated by resistance seam welding

Highlights: • WC-Fe/metal coating consisted of WC-Fe layer and metal interlayer was fabricated by resistance seam welding. • The microstructure, hardness and wear performance of coatings with different WC particles size were analyzed. • The wear mechanism of coatings showed huge difference following various sliding distance. - Abstract: WC-Fe composite/metal coatings consisting of a WC-Fe composite layer and a metal interlayer were successfully fabricated on an Al 6061 substrate by resistance seam welding. The microstructures and phase compositions of the WC-Fe composite/metal coatings with different WC particle sizes (nano, fine, and coarse) were investigated. The WC-Fe composite layer consisted of WC particles and a Fe-C-Si super hard alloy (SHA) component, whereas the metal interlayer was composed of SHA, FeAl{sub 3}, Fe{sub 2}Al{sub 5}, and Al 6061. The surface microhardness of the WC-Fe composite/metal coating increased with increasing WC particle size. The wear performance of the coatings tested with different sliding distances is discussed in detail. Coating-C (coarse) showed the best wear resistance. The wear rates of both coating-N (nano) and coating-C decreased as the sliding distance increased, while coating-F (fine) demonstrated the opposite behavior. The wear mechanisms of the coatings were drastically different owing to the significantly different WC particle behavior at various sliding distances.

36 MATERIALS SCIENCE↗

Preparation of Mg/Al-LDHs intercalated with dodecanoic acid and investigation of its antiwear ability

Graphical abstract: Comparable studies of nano Mg/Al-LDHs powder on the anti-wear properties of lubricating oil were carried out on four-ball and gear testing machine. Mg/Al-NO{sub 3}{sup −}-LDHs and Mg/Al-DA-LDHs powder in base oil possess an excellent friction-reducing property, with a friction coefficient at 23.9% and 22.2% which are lower than that of the base oil Highlights: ► We synthesized nano Mg/Al-NO{sub 3}{sup −}(DA)-LDHs via coprecipitation and anion exchange. ► The optimal exchanging condition is as follows: water dispersion and pH value of 5. ► The tribological properties of LDHs were studied on four-ball and gear machine. ► We reported nano LHDs as anti-wear materials in lubricates for the first time. ► The greatest decline in friction coefficient of lubricates with LDHs is up to 23.9%. -- Abstract: Layered double hydroxides (LDHs) intercalated with dodecanoic acid have been prepared by anion exchange with Mg/Al-NO{sub 3}{sup −}-LDHs as the precursor under acid condition with water and ethanol as the dispersion medium. The obtained materials were characterized by X-ray diffraction (XRD), thermogravimetric and differential thermal analyser (TG–DTA), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and BET. Patterns of XRD and FTIR show that interlayer nitrate ions have substituted with dodecanoic acid and the gallery height has increased from 0.88 nm to 1.99 nm. The interlayer distance of the intercalated materials increases with the increase of pH value due to the different arrangement of interlayer anions. The tribological performance of LDHs precursor and intercalated LDHs in base oil were studied for the first time by using four-ball wear machine and gear testing machine. Experimental results show that the LDHs precursor and intercalated LDHs powder are excellent in friction-reducing, with decreases in friction coefficient by 23.9% and 22.2% respectively comparing with base oil.

36 MATERIALS SCIENCE↗

Thermal decomposition behavior of Cu–Al layered double hydroxide, and ethylenediaminetetraacetate-intercalated Cu–Al layered double hydroxide reconstructed from Cu–Al oxide for uptake of Y{sup 3+} from aqueous solution

Graphical abstract: Display Omitted Highlights: ► Decomposition of CO{sub 3}·Cu–Al LDH occurred in four stages. ► The edta·Cu–Al LDH was found to take up Y{sup 3+} in aqueous solution. ► The edta·Cu–Al LDH could selectively take up rare earth ions from a mixed solution. -- Abstract: CO{sub 3}{sup 2−}-intercalated Cu–Al layered double hydroxide (CO{sub 3}·Cu–Al LDH) was calcined to yield Cu–Al oxide, and then ethylenediaminetetraacetate-intercalated Cu–Al LDH (edta·Cu–Al LDH) was prepared by reconstructing Cu–Al oxide in edta solution. Decomposition of CO{sub 3}·Cu–Al LDH occurred in four stages. The production of Cu–Al oxide was caused by the thermal decomposition of CO{sub 3}·Cu–Al LDH until the third stage. The first stage was the elimination of adsorbed surface water and interlayer water in CO{sub 3}·Cu–Al LDH. The second and third stages were the dehydroxylation of the brucite-like octahedral layers and the elimination of CO{sub 3}{sup 2−} intercalated in the interlayers. The edta·Cu–Al LDH was found to take up Y{sup 3+} in aqueous solution. The uptake of Y{sup 3+} was caused not only by the chelating function of Hedta{sup 3−} in the interlayer but also by the chemical behavior of Cu–Al LDH itself. The edta·Cu–Al LDH was found to selectively take up rare earth ions from a mixed solution. The degree of uptake was high, in the order Sc{sup 3+} > Y{sup 3+} > La{sup 3+} for all time durations, which was attributable to differences among the stabilities of Sc(edta){sup −}, Y(edta){sup −} and La(edta){sup −}.

36 MATERIALS SCIENCE↗