Search NASA⌕ Search

SEARCH · Search NASA

Results for “mobility models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Effects of Vegetation Canopy Structure on Microwave Scattering

The role of canopy structure on microwave backscattering is studied. Structure refers to the size, orientation, and vertical placement of scatterers in the canopy. Models to predict the backscattering coefficient, SIGMAO, of vegetation with explicit biophysical and explicit polarization-dependent parameters were developed. Preparation for field measurements with radar scatterometers was completed. Technical progress included: (1) the modification of the Attema and Ulaby (1977) model and its multilayer variation by Hoekman et al. (1983) to include polarization explicitly (i.e., to allow for separate backscattering cross sections, SIGMA, and extinction cross sections, Q, for each polarization), (2) the investigation of the modified model to isolate canopy element orientation parameters by the rationing of SIGMAO measurements for different polarization combinations, (3) the development of expressions for bistatic scattering and canopy-substrate scattering to supplement the models, (4) the performance of sensitivity analyses on these models, (5) the modification of the Attema and Ulaby model to alloy for changes, (6) the use of the modified model with a seasonal corn data set from Kansas (Eger et al., 1983), and (7) the initiation of preparations for empirical measurements with radar spectrometer and the Mobile Radar Scatterometer in irrigated cropland to test the models.

Paris, J. F.↗

A Proposed Change to ITU-R Recommendation 681

Recommendation 681 of the International Telecommunications Union (ITU) provides five models for the prediction of propagation effects on land mobile satellite links: empirical roadside shadowing (ERS), attenuation frequency scaling, fade duration distribution, non-fade duration distribution, and fading due to multipath. Because the above prediction models have been empirically derived using a limited amount of data, these schemes work only for restricted ranges of link parameters. With the first two models, for example, the frequency and elevation angle parameters are restricted to 0.8 to 2.7 GHz and 20 to 60 degrees, respectively. Recently measured data have enabled us to enhance the range of the first two schemes. Moreover, for convenience, they have been combined into a single scheme named the extended empirical roadside shadowing (EERS) model.

Davarian, F.↗

Temperature dependence of the atomic structure and electrical activity of defects in ZnSb thermoelectric lightly doped with copper

A model for describing the temperature dependence of the defect microstructure in high-efficiency ZnSb thermoelectric with a copper content of 0.1 at % is chosen. The temperature dependences of the chargecarrier density and mobility for thermal cycle I (300–700–300 K) are analyzed taking into account the features of the crystal structure and covalent chemical bond in ZnSb. The basic defect structure (at temperatures of T = 560–605 K) is the state when all Cu atoms are equally distributed between sites of both sublattices and behave as acceptors, and the number of intrinsic donor and acceptor defects is much smaller. The effect of the latter becomes noticeable when the temperature goes beyond the above-mentioned range. At T > 605 K, extra acceptors (antisite Zn{sub Sb}) occur; upon cooling below 560 K, Cu{sub 2} dimers arise and the electrical activity of the impurity lowers. Dimer decay upon heating leads to growth in the concentration with temperature up to saturation in the above-mentioned range. Additional thermal cycles II–VIII are performed; the observed changes in the temperature dependences of the hole concentration and mobility are discussed in the context of the investigated model.

36 MATERIALS SCIENCE↗

Counter-thermal flow of holes in high-mobility LaNiO 3 thin films

Measurements of electronic structure and theoretical models indicate that the Fermi surface of LaNiO 3 (LNO) is predominantly holelike, with a small electron pocket. However, measurements of the Hall and Seebeck effects yield nominally opposite signs for the dominant charge carrier type, making charge transport in LNO puzzling. Here, we combine measurements of the Hall, Seebeck, and Nernst coefficients in high-mobility epitaxial LNO thin films, and resolve this puzzle by demonstrating that the negative Seebeck coefficient is generated by the diffusion of holes from cold to hot regions of LNO. Here, we further examine this counter-thermal flow of holes by measuring the evolution of the Nernst coefficient from the diffusive to the ballistic regime, where the suppression of energy-dependent scattering leads to a reversal of the flow of holes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mobility Energy Productivity Evaluation of Prediction-Based Vehicle Powertrain Control Combined with Optimal Traffic Management

Transportation vehicle and network system efficiency can be defined in two ways: 1) reduction of travel times across all the vehicles in the system, and 2) reduction in total energy consumed by all the vehicles in the system. The mechanisms to realize these efficiencies are treated as independent (i.e., vehicle and network domains) and, when combined, they have not been adequately studied to date. This research aims to integrate previously developed and published research on Predictive Optimal Energy Management Strategies (POEMS) and Intelligent Traffic Systems (ITS), to address the need for quantifying improvement in system efficiency resulting from simultaneous vehicle and network optimization. POEMS and ITS are partially independent methods which do not require each other to function but whose individual effectiveness may be affected by the presence of the other. In order to evaluate the system level efficiency improvements, the Mobility Energy Productivity (MEP) metric is used. MEP specifically measures the connectedness of a system while accounting for time and energy externalities of modes that provide mobility in a given location. A SUMO model is developed to reflect real traffic patterns in Fort Collins, Colorado and data is collected by a probe SUMO vehicle which is validated against data collected on a real vehicle driving the same routes through the city. Individual vehicle and system level efficiencies are calculated using SUMO outputs for scenarios which integrate POEMS and ITS independently as well as jointly. Results from application of POEMS and ITS show improvement in energy consumption and travel times respectively when compared to the respective baseline scenarios. Our conclusion is that there are promising synergistic benefits to travel time and energy efficiency when POEMS and ITS are combined.

ADVANCED PROPULSION SYSTEMS↗

Augmenting Space Technology Program Management with Secure Cloud & Mobile Services

The National Aeronautics and Space Administration (NASA) Game Changing Development (GCD) program manages technology projects across all NASA centers and reports to NASA headquarters regularly on progress. Program stakeholders expect an up-to-date, accurate status and often have questions about the program's portfolio that requires a timely response. Historically, reporting, data collection, and analysis were done with manual processes that were inefficient and prone to error. To address these issues, GCD set out to develop a new business automation solution. In doing this, the program wanted to leverage the latest information technology platforms and decided to utilize traditional systems along with new cloud-based web services and gaming technology for a novel and interactive user environment. The team also set out to develop a mobile solution for anytime information access. This paper discusses a solution to these challenging goals and how the GCD team succeeded in developing and deploying such a system. The architecture and approach taken has proven to be effective and robust and can serve as a model for others looking to develop secure interactive mobile business solutions for government or enterprise business automation.

Hodson, Robert F.↗

Machine learning the spectral function of a hole in a quantum antiferromagnet

Understanding charge motion in a background of interacting quantum spins is a fundamental problem in quantum many-body physics. The most extensively studied model for this problem is the so-called t-t'-t''-J model, where the determination of the parameter t' in the context of cuprate superconductors is challenging. Here we present a theoretical study of the spectral functions of a mobile hole in the t-t'-t''-J model using two machine-learning techniques: K-nearest neighbor regression (KNN) and a feed-forward neural network (FFNN). We employ the self-consistent Born approximation to generate a dataset of about 1.3 x 10 5 spectral functions. Here we show that, for the forward problem, both methods allow for the accurate and efficient prediction of spectral functions, allowing, e.g., rapid searches through parameter space. Furthermore, we find that for the inverse problem (inferring Hamiltonian parameters from spectra), the FFNN can, but the KNN cannot, accurately predict the model parameters using merely the density of states. Our results suggest that it may be possible to use deep-learning methods to predict materials parameters from experimentally measured spectral functions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Automated Mobility Districts Toolkit

On-demand transportation services have seen a dramatic rise in the past decade, thanks to technology. Connected and automated vehicle (CAV) technology holds potential for a major transformation in the on-demand mobility services landscape.The timeline for fully automated vehicles (AVs) to reach the critical market share is still uncertain. In the short term, many cities in the United States and abroad are testing low-speed automated electric shuttles (AES) as a shared on-demand mobility service in geo-fenced regions. This presentation provides information about the development of the Automated Mobility District (AMD) Toolkit, which features an assortment of modeling and simulation capabilities. An AMD is a campus-sized implementation of connected and automated vehicle technologies that realize all the benefits of a fully electric automated mobility service within a confined region or district.

33 ADVANCED PROPULSION SYSTEMS↗

Atomic-scale investigation of point defects and hydrogen-solute atmospheres on the edge dislocation mobility in alpha iron

In this study, we present atomistic mechanisms of 1/2 [111](11{sup ¯}0) edge dislocation interactions with point defects (hydrogen and vacancies) and hydrogen solute atmospheres in body centered cubic (bcc) iron. In metals such as iron, increases in hydrogen concentration can increase dislocation mobility and/or cleavage-type decohesion. Here, we first investigate the dislocation mobility in the presence of various point defects, i.e., change in the frictional stress as the edge dislocation interacts with (a) vacancy, (b) substitutional hydrogen, (c) one substitutional and one interstitial hydrogen, (d) interstitial hydrogen, (e) vacancy and interstitial hydrogen, and (f) two interstitial hydrogen. Second, we examine the role of a hydrogen-solute atmosphere on the rate of local dislocation velocity. The edge dislocation simulation with a vacancy in the compression side of the dislocation and an interstitial hydrogen atom at the tension side exhibit the strongest mechanical response, suggesting a higher potential barrier and hence, the higher frictional stress (i.e., ∼83% higher than the pure iron Peierls stress). In the case of a dislocation interacting with a vacancy on the compressive side, the vacancy binds with the edge dislocation, resulting in an increase in the friction stress of about 28% when compared with the Peierls stress of an edge dislocation in pure iron. Furthermore, as the applied strain increases, the vacancy migrates through a dislocation transportation mechanism by attaining a velocity of the same order as the dislocation velocity. For the case of the edge dislocation interacting with interstitial hydrogen on the tension side, the hydrogen atom jumps through one layer perpendicular to the glide plane during the pinning-unpinning process. Finally, our simulation of dislocation interactions with hydrogen show first an increase in the local dislocation velocity followed by a pinning of the dislocation core in the atmosphere, resulting in resistance to dislocation motion as the dislocation moves though the hydrogen-solute atmospheres. With this systematic, atomistic study of the edge dislocation with various point defects, we show significant increase in obstacle strengths in addition to an increase in the local dislocation velocity during interaction with solute atmospheres. The results have implications for constitutive development and modeling of the hydrogen effect on dislocation mobility and deformation in metals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-Fidelity Computational Aerodynamics of the Elytron 4S UAV

High-fidelity Computational Fluid Dynamics (CFD) have been carried out for the Elytron 4S Unmanned Aerial Vehicle (UAV), also known as the converticopter "proto12". It is the scaled wind tunnel model of the Elytron 4S, an Urban Air Mobility (UAM) concept, a tilt-wing, box-wing rotorcraft capable of Vertical Take-Off and Landing (VTOL). The three-dimensional unsteady Navier-Stokes equations are solved on overset grids employing high-order accurate schemes, dual-time stepping, and a hybrid turbulence model using NASA's CFD code OVERFLOW. The Elytron 4S UAV has been simulated in airplane mode and in helicopter mode.

High-Fidelity↗

A First-Principles Model Based on Saturation of the Electron Cyclotron Drift Instability for Electron Transport in Hydrodynamics Simulations of Hall Thruster Plasmas

We present a computational model based on the hypothesis that the higher-than-expected electron mobility across magnetic field lines observed in Hall thrusters is due to the growth and eventual saturation of the electron cyclotron drift instability. The key improvement of this model with respect to previous work is that it decouples the saturation of the instability from the correlation that exists between mobility and magnitude of the wave perturbations in linear theory, thereby enabling first-principles simulations. The model has been incorporated in the 2-D (r-z) multi-fluids code Hall2De and simulations of the H6 thruster at 300 V, 20 A are numerically stable and achieve a steady-state solution at a computational cost that is not significantly higher than previous Hall2De simulations. The computed location of the acceleration region is found to be within 10% of the length of the acceleration channel compared to that inferred by experiments. The simulations also capture well the plasma gradients along the channel centerline of this thruster. To further establish the validity of this model, we plan to conduct simulations of other thrusters and/or operating conditions.

Lopez Ortega, Alejandro↗

Stretchable and Self‐Healable Semiconductive Composites Based on Hydrogen Bonding Cross‐linked Elastomeric Matrix

Abstract Semiconductors with both high stretchability and self‐healing capability are highly desirable for various wearable devices. Much progress has been achieved in designing highly stretchable semiconductive polymers or composites. The demonstration of self‐healable semiconductive composite is still rare. Here, an extremely soft, highly stretchable, and self‐healable hydrogen bonding cross‐linked elastomer, amide functionalized‐polyisobutylene (PIB‐amide) is developed, to enable a self‐healable semiconductive composite through compounding with a high‐performance conjugated diketopyrrolopyrrole (DPP‐T) polymer. The composite, consisting of 20% DPP‐T and 80% PIB‐amide, shows record high crack‐onset strain (COS ≈1500%), extremely low elastic modulus (E≈1.6 MPa), and unique ability to spontaneously self‐heal atroom temperature within 5 min. Unlike previous works, these unique composite materials also show strain‐independent charge mobility. An in‐depth morphological study based on multi‐model techniques indicate that all composites show blending ratio‐ and stretching‐independent fibril‐like aggregation due to the strong hydrogen bond in elastomer to enable the unique stable charge mobility. This study provides a new direction to develop highly healable and electronically stable semiconductive composite and will enable new applications of stretchable electronics.

Chemistry↗

Dysprosium-doped cadmium oxide as a gateway material for mid-infrared plasmonics

The interest in plasmonic technologies surrounds many emergent optoelectronic applications, such as plasmon lasers, transistors, sensors and information storage. Although plasmonic materials for ultraviolet–visible and near-infrared wavelengths have been found, the mid-infrared range remains a challenge to address: few known systems can achieve subwavelength optical confinement with low loss in this range. With a combination of experiments and ab initio modelling, here we demonstrate an extreme peak of electron mobility in Dy-doped CdO that is achieved through accurate ‘defect equilibrium engineering’. In so doing, we create a tunable plasmon host that satisfies the criteria for mid-infrared spectrum plasmonics, and overcomes the losses seen in conventional plasmonic materials. In particular, extrinsic doping pins the CdO Fermi level above the conduction band minimum and it increases the formation energy of native oxygen vacancies, thus reducing their populations by several orders of magnitude. The substitutional lattice strain induced by Dy doping is sufficiently small, allowing mobility values around 500 cm 2 V –1 s –1 for carrier densities above 10 20 cm –3 . As a result, our work shows that CdO:Dy is a model system for intrinsic and extrinsic manipulation of defects affecting electrical, optical and thermal properties, that oxide conductors are ideal candidates for plasmonic devices and that the defect engineering approach for property optimization is generally applicable to other conducting metal oxides.

36 MATERIALS SCIENCE↗

Operational Modal Analysis of the Space Launch System Mobile Launcher on the Crawler Transporter ISVV-010 Rollout

NASA is developing an expendable heavy lift launch vehicle capability, the Space Launch System, to support lunar and deep space exploration. To support this capability, an updated ground infrastructure is required including modifying an existing Mobile Launcher system. The Mobile Launcher is a very large heavy beam/truss steel structure designed to support the Space Launch System during its buildup and integration in the Vehicle Assembly Building, transportation between the Vehicle Assembly Building and launch pad 39B by the Crawler Transporter, and provides the launch platform at the launch pad. As part of the Verification and Validation of the Mobile Launcher and Crawler Transporter, two rollouts of the Mobile Launcher transported by the Crawler Transporter, Integrated System Verification and Validation (ISVV) 005 and 010, have been performed to demonstrate the Crawler Transporter’s ability to transport the Mobile Launcher. ISVV-005 occurred in September 2018 and ISVV-010 occurred in late June 2019. ISVV-005 and ISVV-010 also provided the opportunity to gather data that can be used identify the Mobile Launcher on the Crawler Transporter rollout modal characteristics and refine the estimates of the Artemis I integrated launch vehicle rollout forcing functions. While the rollout environment has historically produced relatively small launch vehicle structural loads for the Saturn/Apollo and Space Shuttle programs in comparison to launch and ascent loads, these relatively small structural loads are inputs to structural fatigue analyses. The same holds true for the Space Launch System. Because the rollout forces acting on the Mobile Launcher and the Crawler Transporter are not directly measurable, Operational Modal Analysis techniques, instead of traditional Experimental Modal Analysis techniques, provide an empirical means to identify the Mobile Launcher on the Crawler Transporter rollout modal characteristics. The ISVV-010 rollout modal characteristics provide important supplemental modal information, which along with the Mobile Launcher modal test that was performed in June 2019 immediately prior to ISVV-010 rollout, combine to reduce uncertainty in the test correlated Mobile Launcher on the Crawler Transporter finite element model. A well test correlated finite element model will play a key role in the Building Block approach the Space Launch System program has implemented as part of its certification process for the Artemis I flight and in refining the Artemis I rollout forcing functions. At the time of the ISVV-005 rollout in September 2018, the Mobile Launcher was still undergoing construction, and therefore its modal characteristics are not directly comparable to those of the Mobile Launcher during the June 2019 Mobile Launcher modal test and subsequent ISVV-010 rollout. Hence the ISVV-005 rollout modal characteristics will not be looked at in this paper. This paper will briefly describe the Mobile Launcher and Crawler Transporter physical characteristics, ISVV-010 rollout data collection, the challenges in implementing Operational Modal Analysis techniques due in part to the Crawler Transporter harmonics, and how these challenges were overcome to obtain the ISVV-010 Mobile Launcher on the Crawler Transporter rollout modal characteristics.

Apollo↗

Mobility of twinning dislocations in copper up to supersonic speeds

Understanding the mobility of twinning dislocations is important for multiscale modeling of crystal plasticity, especially at high strain rates, where such dislocations may reach transonic or supersonic speeds. Here, we used molecular dynamics simulations to investigate the relationship between dislocation velocity and the applied resolved shear stress of an edge twinning dislocation in copper up to supersonic speeds. The twinning dislocation mobility relation is composed of two branches separated by a band of forbidden velocities. The lower velocity branch is limited by the first transverse sound speed ~2000 m/s while the upper branch stretches from ~3500 m/s in the transonic regime to supersonic velocities. Twinning dislocations cannot undergo uniform steady-state motion at velocities within the forbidden band. Our simulation results also reveal that edge twinning dislocation motion in copper is kink-mediated. We discuss the implications of our findings for the motion of twins, twinning dislocations, and twinning dislocation kinks in copper.

36 MATERIALS SCIENCE↗

Ge's Mobile, Coherent Doppler Lidar Test/Ealuation Facilities

The primary objective of this independent research and development (IR and D) program in support of the Laser Atmospheric Wind Sounder (LAWS) program is to develop and evaluate technologies with direct applications to spaceborne laser wind sensing, and to develop system level engineering experience in designing, operating, and modeling a coherent Doppler lidar. GE is developing a mobile, ground based coherent Doppler lidar as an end-to-end system level test facility to evaluate applicable technologies, verify system level performance issues, perform instrument calibration, and validate end-to-end system performance model predictions. Here, the primary focus is on a description of the ground based lidar system and the performance during the initial shakedown operation after system integration.

Sroga, J. T.↗

Investigations of radiation-induced and carrier-enhanced conductivity

A steady-state carrier computer code, PECK (Parker Enhanced Carrier Kinetics), that predicts the radiation-induced conductivity (RIC) produced in a dielectric by an electron beam was developed. The model, which assumes instantly-trapped holes, was then applied to experimental measurements on thin Kapton samples penetrated by an electron beam. Measurements at high bias were matched in the model by an appropriate choice for the trap-modulated electron mobility. A fractional split between front and rear currents measured at zone bias is explained on the basis of beam-scattering. The effects of carrier-enhanced conductivity (CEC) on data obtained for thick, free-surface Kapton samples is described by using an analytical model that incorporates field injection of carriers from the RIC region. The computer code, LWPCHARGE, modified for carrier transport, is also used to predict partial penetration effects associated with CEC in the unirradiated region. Experimental currents and surface voltages, when incorporated in the appropriate models, provide a value for the trap modulated mobility that is in essential agreement with the RIC results.

Meulenberg, A., Jr.↗

Radio frequency sheaths in an oblique magnetic field

The physics of radio-frequency (rf) sheaths near a conducting surface is studied for plasmas immersed in a magnetic field that makes an oblique angle θ with the surface. A set of one-dimensional equations is developed that describes the dynamics of the time-dependent magnetic presheath and non-neutral Debye sheath. The model employs Maxwell-Boltzmann electrons, and the magnetization and mobility of the ions is determined by the magnetic field strength, and wave frequency, respectively. The angle θ, assumed to be large enough to insure an electron-poor sheath, is otherwise arbitrary. Concentrating on the ion-cyclotron range of frequencies, the equations are solved numerically to obtain the rectified (dc) voltage, the rf voltage across the sheath, and the rf current flowing through the sheath. As an application of this model, the sheath voltage-current relation is used to obtain the rf sheath impedance, which in turn gives an rf sheath boundary condition for the electric field at the sheath-plasma interface that can be used in rf wave codes. In general, the impedance has both resistive and capacitive contributions, and generalizes previous sheath boundary condition models. The resistive part contributes to parasitic power dissipation at the wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗