Search NASA⌕ Search

SEARCH · Search NASA

Results for “morphological stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Effects of nano-SiO{sub 2} particles on surface tracking characteristics of silicone rubber composites

Compared with neat silicone rubber composites (SiRCs), SiRCs filled with nano-sized SiO{sub 2} particles at weight ratios from 0.1 to 1.0 wt. % exhibit a higher surface flashover voltage and a greater resistance to surface tracking. Scanning electron microscopy images of tracking morphologies indicate that the SiO{sub 2} particles are situated in close proximity to the polymeric chains and act as bridges to stabilize the chains and maintain the structure of the composite. Higher concentrations of nano-sized SiO{sub 2} particles, however, (above 0.3 wt. %) produce defects in the molecular network which lead to reductions in both the surface flashover voltage and the resistance to surface tracking, although these reduced values are still superior to those of neat SiRCs. Therefore, SiRCs filled with nano-sized SiO{sub 2} particles, especially at an optimal weight ratio (0.1 to 0.3 wt. %), may have significant potential applications as outdoor insulators for power systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Dynamic response of nanosecond repetitively pulsed discharges to combustion dynamics: regime transitions driven by flame oscillations

Abstract When using nanosecond repetitively pulsed discharges to actuate on dynamic combustion instabilities, the environment the discharge is created in is unsteady and changing on the timescale of the combustion processes. As a result, individual discharge pulses are triggered in a background gas that evolves at the timescale of combustion dynamics, and pulse-to-pulse variations may be observed during the instability cycle. Prior work has studied nanosecond pulsed discharges in pin-to-ring configurations used to control instabilities in lean-operating swirl-stabilized combustors, and observed variable discharge behavior. The focus of this work is on characterizing how the pulse-to-pulse discharge morphology, energy deposition, and actuation authority, evolve during the combustion instability cycle. This has important implications for designing effective plasma-assisted combustion control schemes. The discharge is observed in two distinct modes, a streamer corona and a nanosecond spark, with the occurrence of each regime directly linked to the phase of the combustor instability. Variation of pulse repetition frequency affects the total fraction of pulses in each mode, while variation of voltage affects the onset of the nanosecond spark mode. The transitions are described in terms of ratios of the relevant combustion and plasma timescales and the implications of this coupled interaction on the design of an effective control scheme is discussed.

Physics↗
DOE OSTI2017

Pt-Ni/WC Alloy Nanorods Arrays as ORR Catalyst for PEM Fuel Cells

Polymer electrolyte membrane fuel cells (PEMFCs) among the other types of fuel cell technology are attractive power sources, especially for electric vehicle applications. While significant progress and plausible prospects of PEMFCs have been achieved, there are still some challenges related to the performance, durability, and cost that need to be overcome to make them economically viable for widespread commercialization. Our strategy is to develop thin films of high-active and stable catalyst coated on vertically aligned nanorod arrays of conductive and stable support. In this work, we fabricated tungsten carbide (WC) nanorods as support and coated them with a platinum-nickel (Pt-Ni) alloy shell denoted as Pt-Ni/WC catalysts. The Pt- Ni/WC nanorods were deposited on glassy carbon disks as well as on silicon substrates for evaluation of their electrocatalytic oxygen reduction reaction (ORR) activity and physical properties. Cyclic voltammetry experiments using rotating disk electrode were performed in perchloric acid (0.1 M HClO4) electrolyte at room temperature to characterize the ORR activity and stability of Pt-Ni/WC nanorods catalysts. Scanning electron microscopy and X-ray diffraction techniques were utilized to study the morphology and crystallographic properties, respectively.

Begum, Mahbuba↗
DOE OSTI2016

The influence of fine ferrite formation on the γ/α interface, fine bainite and retained austenite in a thermomechanically-processed transformation induced plasticity steel

We subjected a Fe–0.26C–1.96Si–2Mn with 0.31Mo (wt%) steel to a novel thermomechanical processing route to produce fine ferrite with different volume fractions, bainite, and retained austenite. In two types of fine ferrites were found to be: (i) formed along prior austenite grain boundaries, and (ii) formed intragranularly in the interior of austenite grains. An increase in the volume fraction of fine ferrite led to the preferential formation of blocky retained austenite with low stability, and to a decrease in the volume fraction of bainite with stable layers of retained austenite. Moreover, the difference in the morphology of the bainitic ferrite and the retained austenite after different isothermal ferrite times was found to be responsible for the deterioration of the mechanical properties. The segregation of Mn, Mo, and C at distances of 2–2.5 nm from the ferrite and retained austenite/martensite interface on the retained austenite/martensite site was observed after 2700 s of isothermal hold. Finally, it was suggested that the segregation occurred during the austenite-to-ferrite transformation, and that this would decrease the interface mobility, which affects the austenite-to-ferrite transformation and ferrite grain size.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Navigating the complexities of solvent and binder selection for solution processing of sulfide solid-state electrolytes

We introduce a paradigm of solvent and binder selection for solution-processing Li 6 PS 5 Cl solid-state electrolyte particles based on Hansen solubility parameters. Treatment of the Li 6 PS 5 Cl in selected solvents results in particle morphological change, but crystallographic structure remains intact. Although solution processing reduced the Li 6 PS 5 Cl ionic conductivity, it promotes interfacial stability by alleviating reduction of the solid electrolyte in contact with Li metal. In conclusion, these findings have the potential to enhance the stability, structural integrity, and performance of sulfide solid-state electrolytes in practical applications.

25 ENERGY STORAGE↗
NASA NTRS1982

Long-term thermal degradation and alloying constituent effects on five boron/aluminum composites

Thermal exposure effects on the properties of five boron/aluminum composite systems were experimentally investigated. The composite systems were 49 volume percent boron fibers (203 micron diameter) in aluminum-alloy matrices 1100 Al, 2024 Al, 3003 Al, 5052 Al, and 6061 Al. Specimens were thermally exposed up to 10,000 hours at 500 K and 590 K, up to 500 hours at 730 K, and up to 10,000 hours at 500 K and 590 K, up to 500 hours at 730 K, and up to 2000 thermal cycles between 200 K and 590 K. Composite longitudinal and transverse tensile strengths, longitudinal compression strength, and in-plane shear strength were determined. None of the systems was severely degraded by exposure at 590 K. The best performing system was B-2024 Al. Effects of matrix alloys on degradation mechanisms were experimentally investigated. Composite specimens and individual fibers were metallurgically analyzed with a scanning electron microscope and an electron microprobe to determine failure characteristics, chemical element distribution, and reaction layer morphology. Alloying constituents were found to be affect the composite degradation mechanisms as follows: alloys containing iron, but without manganese as a stabilizer, caused increased low-temperature degradation; alloys containing magnesium, iron, or manganese caused increased degradation; and alloys containing copper caused increased fiber strength.

Olsen, G. C.↗
NASA NTRS1993

Determination of semi-arid landscape endmembers and seasonal trends using convex geometry spectral unmixing techniques

Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data were acquired during three consecutive growing seasons (26 September 1989, 22 March 1990, and 7 August 1990) over an area of the High Plains east of Greeley, Colorado (40 deg 20 min N and 104 deg 16 min W). A repeat visit to assess vegetation at its peak growth was flown on 6 June 1993. This region contains extensive eolian deposits in the form of stabilized dune complexes (small scale parabolic dunes superimposed on large scale longitudinal and parabolic dunes). Due to the dunes' large scale (2-10 km) and low relief (1-5 m), the scaling and morphological relationships that contribute to the evolution of this landscape are nearly impossible to understand without the use of remote sensing. Additionally, this area and regions similarly situated could be the first to experience the effects caused by global climate change. During the past 10,000 years there were at least four periods of extensive sand activity due to climate change, followed by periods of landscape stability, as shown in the stratigraphic record of this area.

Yuhas, Roberta H.↗
NASA NTRSDate not supplied

Decadal Changes in Barrier Island Facies near Mansfield Pass on Padre Island, Texas from 1950-Present

Barrier islands serve an important role in shielding coastal areas from storms and wave erosion. Monitoring changes in barrier island systems helps understand the effect of storms and sea level rise on the stability of the island. The study area is at Padre Island, near Mansfield Pass, has seen wide-spread changes in surface morphology underpinned by significant growth of vegetation and microbial mats.

Kenton R. Fisher↗
DOE OSTI2013

Stability and Lifetime of K-CoMoSx Mixed Alcohol Catalysts

Researchers have studied sulfide-type catalysts for the production of mixed alcohols from synthesis gas for several decades. Despite many advances in the art, these processes are not yet commercial, due in large part to mediocre economics and the added risk associated with uncertainty in catalyst lifetime. This talk will outline some recent studies in the lifetime and stability of K-CoMoSx-type mixed alcohol catalysts. Specifically, studies of long term operation (> 3000h), sulfiding agents, simulated methanol recycle, and morphology (probed via XRD and XPS) will be discussed, with the conclusion that these materials are likely to exhibit acceptable lifetimes in continuous operation.

09 BIOMASS FUELS↗
DOE OSTI2020

Atomic Layer Deposition (ALD) to Extend Catalyst Lifetime for Biobased Adipic Acid Production

Robust heterogeneous catalysts are essential for enabling biomass conversion; however, harsh reaction environments introduce durability challenges for many conventional catalyst materials [1]. The hydrogenation of biobased muconic acid to adipic acid is one such emerging chemistry that faces PGM catalyst stability challenges [2]. Muconic acid is a heavily-investigated biobased platform chemical that can be converted into an array of large-market commodity chemicals [2]. PGM catalysts are exceptionally effective for muconic acid hydrogenation to adipic acid, with Pd the most active to date. [2] However, Pd leaches in an acidic environment and this chemistry has a high propensity for fouling. Atomic layer deposition (ALD) is one such material design strategy that has emerged to stabilize supported metal catalysts [3]. ALD coatings are theorized to stabilize supported metal active sites by i) covering high-energy facets most susceptible to degradation, ii) disrupting the physical mobility of active sites, and iii) reinforcing the structure of the underlying catalyst support [3]. However, ALD coatings for catalyst durability with carboxylic acids remains an underdeveloped area of research and literature reports have yet to consider the techno-economic tradeoffs between the ALD manufacturing cost and catalyst lifetime productivity. This study examines low-cycle Al2O3 ALD coatings to stabilize Pd/TiO2 against deactivation during muconic acid hydrogenation. The unique harshness of muconic acid for Pd leaching was evaluated by both experiment and computation. Based on batch reactor screening results, uncoated and ALD coated catalysts were evaluated in a continuous flow reactor for their productivity, stability, and post-reaction regenerability at 700 degrees C. Characterization was performed to assess the impact of ALD coatings on catalyst morphology, as well as following regeneration. Finally, techno-economic analysis models evaluated the value proposition for ALD-coated catalysts within an nth-generation adipic acid biorefinery.

09 BIOMASS FUELS↗
DOE OSTI2022

Integration of Highly Luminescent Lead Halide Perovskite Nanocrystals on Transparent Lead Halide Nanowire Waveguides through Morphological Transformation and Spontaneous Growth in Water

The integration of highly luminescent CsPbBr 3 quantum dots on nanowire waveguides has enormous potential applications in nanophotonics, optical sensing and quantum communications. On the other hand, CsPb 2 Br 5 nanowires have also attracted a lot of attention due to their unique water stability and controversial luminescent property. Here we first report the growth of CsPbBr 3 nanocrystals on CsPb 2 Br 5 nanowires by simply immersing CsPbBr 3 powder into pure water, CsPbBr 3-γ X γ (X = Cl, I) nanocrystals on CsPb 2 Br 5-γ X γ nanowires are then synthesized for tunable light sources. Systematic structure and morphology studies, including in-situ monitoring, revealed that CsPbBr 3 powder was first converted to CsPb 2 Br 5 microplatelets in water, followed by a morphological transformation from CsPb 2 Br 5 microplatelets to nanowires, which is a kinetic dissolution-recrystallization process controlled by electrolytic dissociation and supersaturation of CsPb 2 Br 5 . CsPbB r3 nanocrystals are spontaneously formed on CsPb 2 Br 5 nanowires when nanowires are collected from the aqueous solution. Raman spectroscopy, combined photoluminescence and SEM imaging confirm that the bright emission originates from CsPbBr 3-γ X γ nanocrystals while CsPb 2 Br 5-γ X γ nanowires are transparent waveguides. In conclusion, the intimate integration of nanoscale light sources with a nanowire waveguide is demonstrated through the observation of the wave guiding of light from nanocrystals and Fabry-Perot interference modes of the nanowire cavity.

42 ENGINEERING↗
DOE OSTI2019

Surface-Synthesized Graphene Nanoribbons for Room Temperature Switching Devices: Substrate Transfer and ex Situ Characterization

Recent progress in the on-surface synthesis of graphene nanoribbons (GNRs) has given access to atomically precise narrow GNRs with tunable electronic band gaps which makes them excellent candidates for room temperature switching devices such as field-effect transistors (FET). However, in spite of their exceptional properties, significant challenges remain for GNR processing and characterization. This contribution addresses some of the most important challenges, including GNR fabrication scalability, substrate transfer, long-term stability under ambient conditions, and ex situ characterization. We focus on 7- and 9-atom-wide armchair graphene nanoribbons (i.e., 7-AGNR and 9-AGNR) grown on 200 nm Au(111)/mica substrates using a high throughput system. Transfer of both 7- and 9-AGNRs from their Au growth substrate onto various target substrates for additional characterization is accomplished utilizing a polymer-free method that avoids residual contamination. This results in a homogeneous GNR film morphology with very few tears and wrinkles, as examined by atomic force microscopy. Raman spectroscopy indicates no significant degradation of GNR quality upon substrate transfer and reveals that GNRs have remarkable stability under ambient conditions over a 24 month period. The transferred GNRs are analyzed using multiwavelength Raman spectroscopy, which provides detailed insight into the wavelength dependence of the width-specific vibrational modes. Finally, we characterize the optical properties of 7- and 9-AGNRs via ultraviolet–visible (UV–vis) spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of Magnesium Dopant on the Grain Boundary Stability of Nanocrystalline Aluminum Powders during Cryomilling

In this investigation, pure aluminum (Al) powders were cryomilled with and without magnesium dopants to study (a) the effect of cryomilling time on the crystallite size and (b) the effect of magnesium dopant on Al to achieve grain boundary stability. The cryomilling process was carried out using liquid nitrogen for different durations. The characterization of the cryomilled powders was carried out using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD) to understand the particle morphology, crystallite size, and elemental composition. The results demonstrated that the size of the crystallites in both Al and Mg-doped Al powders reduces as the cryomilling duration increases. The results also indicated that the preferential segregation of Mg dopant at the grain boundaries of Al provides stability to the cryomilled powders at elevated temperatures. This article discusses the mechanism for the changes in crystallite size and the effect of the Mg dopant on the grain boundary stability in Al powders.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Catastrophic degradation of the interface of epitaxial silicon carbide on silicon at high temperatures

Epitaxial cubic silicon carbide on silicon is of high potential technological relevance for the integration of a wide range of applications and materials with silicon technologies, such as micro electro mechanical systems, wide-bandgap electronics, and graphene. The hetero-epitaxial system engenders mechanical stresses at least up to a GPa, pressures making it extremely challenging to maintain the integrity of the silicon carbide/silicon interface. In this work, we investigate the stability of said interface and we find that high temperature annealing leads to a loss of integrity. High–resolution transmission electron microscopy analysis shows a morphologically degraded SiC/Si interface, while mechanical stress measurements indicate considerable relaxation of the interfacial stress. From an electrical point of view, the diode behaviour of the initial p-Si/n-SiC junction is catastrophically lost due to considerable inter-diffusion of atoms and charges across the interface upon annealing. Temperature dependent transport measurements confirm a severe electrical shorting of the epitaxial silicon carbide to the underlying substrate, indicating vast predominance of the silicon carriers in lateral transport above 25 K. This finding has crucial consequences on the integration of epitaxial silicon carbide on silicon and its potential applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Design of low bandgap tin–lead halide perovskite solar cells to achieve thermal, atmospheric and operational stability

Low bandgap tin-lead iodide perovskites are key components of all-perovskite tandem solar cells, but can be unstable because tin is prone to oxidation. Here, to avoid a reaction with the most popular hole contact, we eliminated polyethylenedioxythiophene:polystyrenesulfonate as a hole transport layer and instead used an upward band offset at an indium tin oxide-perovskite heterojunction to extract holes. To suppress oxidative degradation, we improved the morphology to create a compact and large-grained film. The tin content was kept at or below 50% and the device capped with a sputtered indium zinc oxide electrode. These advances resulted in a substantially improved thermal and environmental stability in a low bandgap perovskite solar cell without compromising the efficiency. The solar cells retained 95% of their initial efficiency after 1,000 h at 85 degrees C in air in the dark with no encapsulation and in a damp heat test (85 degrees C with 85% relative humidity) with encapsulation. Finally, the full initial efficiency was maintained under operation near the maximum power point and near 1 sun illumination for over 1,000 h.

14 SOLAR ENERGY↗
DOE OSTI2013

Microstructure and thermal oxidation behavior of yttria-stabilized hafnia nanostructured coatings deposited on alumina

Nanostructured yttria-stabilized hafnia (YSH) coatings were grown on α-Al2O3 substrates with variable coating thickness in a wide range of ~50 nm to 1 μm. Microstructure and thermal oxidation behavior of the grown YSH coatings were studied employing X-ray diffraction (XRD), Rutherford backscattering spectrometry (RBS), scanning electron microscopy (SEM) and isothermal furnace oxidation testing. The effect of coating thickness on the crystal structure, surface/interface morphology and thermal oxidation was investigated. X-ray diffraction analyses revealed the formation of monoclinic phase for relatively thin coatings (b100 nm) indicating that the interfacial phenomena play a dominant role in phase stabilization. The evolution towards stabilized cubic phase with increasing coating thickness is observed. The SEM results indicate the dense, columnar structure of YSH coatings as a function of thickness. Thermal oxidation measurements indicate the enhanced hightemperature oxidation resistance of cubic YSH coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Investigating Multiscale Spatial Distribution of Sulfur in a CNT Scaffold and Its Impact on Li–S Cell Performance

Ever increasing demand on high energy density batteries positions sulfur as a very promising cathode material for next-generation energy storage due to its high theoretical capacity of 1675 mAh/g. Electronically sulfur is highly insulating, and therefore integration of a conducting framework such as a carbon nanotube (CNT) scaffold with sulfur is a key aspect of the cathode design. Despite numerous efforts dedicated to S-CNT cathode development, increasing sulfur loading to above 1 mg/cm 2 while maintaining the cycling stability of the Li–S cell remains challenging. This could be partly due to the lack of understanding of the spatial distribution of sulfur in the CNT matrix and its location with respect to the morphology of the CNT scaffold. We demonstrate herein that the sulfur has a hierarchical distribution in the CNT cathode at high sulfur loading (>5 mg/cm 2 ) spanning multiple length scales (from nanometer to submillimeter). Sulfur infiltration into the CNT rather than the sulfur loading plays a key role in determining the redox reaction kinetics, Li + ion diffusion, and the galvanostatic cycling capacity and stability of Li–S cells. This study provides new insights for the design and fabrication of high loading, binder-free sulfur–carbon-based cathode architectures for next-generation high energy Li–S batteries.

25 ENERGY STORAGE↗
DOE OSTI2018

Effective shuttling of photoexcitons on CdS/NiO core/shell photocatalysts for enhanced photocatalytic hydrogen production

Highlights: • CdS/NiO leaf-like morphology was prepared by hydrothermal, citrate mediated growth. • CdS/NiO hierarchical catalyst showed improved rate of photocatalytic H{sub 2} generation. • CdS/NiO showed 2 folds higher rate of H{sub 2} production than CdS under visible light irradiation. • Optimized catalyst showed good stability for 30 h of continuous irradiation. - Abstract: Hierarchical structure of NiO immobilized on CdS photocatalyst (CdS/NiO) was synthesized for stable and efficient H{sub 2} production. The catalyst is designed to suppress the photo-corrosion behaviour without affecting catalytic activity of CdS structures having tamarind leaf-like morphology is protected by fabricating thin-layer of NiO. The exterior thin-layer transmits the light into CdS in-turn exciton moved to surface for reaction with adsorbed reactant species. Structural, morphological and optical properties were studied using X-ray diffraction (XRD), ultraviolet-visible light (UV–vis) diffuse reflectance spectra (DRS), high resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS). The results illustrates that synthesized catalyst composed of crystalline CdS/NiO hierarchical structure that absorbs light in the visible spectrum and improved charge carrier separation than CdS or NiO alone. The photocatalytic activity was examined for H{sub 2} generation under visible light irradiation using Xe-lamp as light source. In order to achieve enhanced H{sub 2} production rate amount of NiO loading was optimized and results were found in the following order CdS/NiO > CdS. Under optimal conditions the catalyst showed stable H{sub 2} evolution for 30 h of continuous irradiation. Under optimal conditions catalyst showed visible light to H{sub 2} conversion efficiency of 6.63%.

36 MATERIALS SCIENCE↗