Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallelism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Super-X and conventional divertor configurations in MAST-U ohmic L-mode; a comparison facilitated by interpretative modelling

Measurements are presented, alongside corresponding interpretative SOLPS-ITER simulations, of the first MAST-U experiments comparing ohmically heated L-mode fuelling scans in Conventional divertor (CD) and Super-X divertor (SXD) configurations. In experiment, at comparable outer mid-plane separatrix electron density, $n_{e,\textrm{sep,OMP}}$, the maximum lower outer target heat load was found to be a factor 16 $\,\pm\,7$ lower in SXD compared to CD. In simulation, a factor 26.8 reduction was found (slightly higher than the experimental range), suggesting an additional reduction in SXD compared to the factor 9.3 expected from geometric considerations alone. According to the simulations, this additional reduction in the SXD is due to a net radial transport of the energy remaining downstream of the $T_e = 5$ eV location. This energy is carried out of the critical (highest heat load) flux tube by deuterium atoms, demonstrating the importance of a longer legged divertor which provides space for this to occur. Importantly, in both simulation and experiment, the SXD has minimal impact on the upstream n e and T e profiles. Spectral inferences of detachment front movement in SXD compare well between simulation and experiment. In regions of high magnetic field gradient, the parallel movement of the front towards the X-point becomes less sensitive to increasing $n_{e,\textrm{sep,OMP}}$, in qualitative agreement with simplified models and previous predictive simulations. Additional aspects, regarding the target ion flux rollover, upstream separatrix temperature and drift effects, are also presented and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Experimental investigation of PDI bifurcation of lower hybrid waves during electron density ramp-up in EAST

Abstract The effect of parametric decay instability (PDI) on the current drive efficiency of 4.6 GHz lower hybrid (LH) waves in EAST is investigated experimentally, showing the PDI channel bifurcation of LH waves for the first time in EAST. First, experiments with three platforms of LH power were performed, achieving the LH power required for the PDI occurrence. Second, PDI bifurcation experiments were further carried out by ramping up the plasma electron density. The loop voltage increases with an increase in density, implying a decrease in the current driven by the LH wave. PDI bifurcation during electron density ramp-up was studied by analyzing the parallel refractive index ( n ∥ ) and the frequency spectrum broadening, which is measured with a radio frequency magnetic probe array recently installed close to the LH antenna. It is observed for the first time that they both first increase with density, then there is not much variation and a clear sideband in the frequency spectrum is also observed when the density is up to 4 × 10 19 m − 3 , suggesting a change in the PDI channel. Calculation of the mode growth rate driven by PDI shows that when the edge electron density is up to 1.9 × 10 18 m − 3 , the growth rate of the ion cyclotron quasi-mode (ICQM) will exceed that of the ion sound quasi-mode (ISQM), quantitively explaining that with an increase in density, the PDI channel partly transits from the ISQM to the ICQM channel. Studies provide a possible way to reduce the power deposition in the edge region and improve drive capability by means of mitigating PDI behavior.

Physics↗
DOE OSTI2024

High performance power handling in the absence of an H-mode edge in negative triangularity DIII-D plasmas

Abstract Experiments performed during strongly-shaped high-power diverted negative triangularity (NT) experiments in DIII-D achieved detached divertor conditions and a transient-free edge, showcasing the potential for application of NT to a core-edge integrated reactor-like scenario and providing the first characterization of the parametric dependencies for detachment onset. Detached divertor conditions will be required in future devices to mitigate divertor heat fluxes. Access to dissipative divertor conditions was investigated via an increase in upstream density. Detachment onset at the outer strike point was achieved with H-mode level confinement H 98 − y 2 ∼ 1 and reactor-relevant normalized pressures β N ∼ 2 . Confinement degradation was observed with deeper detachment, associated with the loss of an electron temperature pedestal. Differences in geometry, radial transport, impact of cross field drifts are discussed to explain differences in access to detachment in NT discharges. Higher normalized densities, with respect to equivalent discharges in positive triangularity, were necessary to achieve detachment, partially explained by the shorter parallel connection length to the targets. The effect of cross-field particle drifts ( E × B , B × ∇ B ) on access to detachment was demonstrated by the lower upstream density needed to access detachment with ion B × ∇ B drift directed outside of the active divertor (Greenwald fraction f Gw ∼ 0.9–1.0 vs f Gw ∼ 1.3). The upstream density at detachment onset was observed to increase linearly with plasma current with ion B × ∇ B drift into the divertor, consistent with the observed narrowing of the scrape-off layer heat flux width λ q . Edge fluid simulations capture separatrix densities needed to achieve detachment in NT plasma and their dependence on drift direction. The ability to reproduce detachment dynamics in NT plasma increases the confidence in future design studies for NT divertors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Overview of physics results from MAST upgrade towards core-pedestal-exhaust integration

Recent results from MAST Upgrade are presented, emphasising understanding the capabilities of this new device and deepening understanding of key physics issues for the operation of ITER and the design of future fusion power plants. The impact of MHD instabilities on fast ion confinement have been studied, including the first observation of fast ion losses correlated with Compressional and Global Alfvén Eigenmodes. High-performance plasma scenarios have been developed by tailoring the early plasma current ramp phase to avoid internal reconnection events, resulting in a more monotonic q profile with low central shear. The impact of m/n = 3/2, 2/1 and 1/1 modes on thermal plasma confinement and rotation profiles has been quantified, and scenarios optimised to avoid them have transiently reached values of normalised beta approaching 4.2. In pedestal and ELM physics, a maximum pedestal top temperature of ~350 eV has been achieved, exceeding the value achieved on MAST at similar heating power. Mitigation of type-I ELMs with n = 1 RMPs has been observed. Studies of plasma exhaust have concentrated on comparing conventional and Super-X divertor configurations, while X-point target, X-divertor and snowflake configurations have been developed and studied in parallel. In L-mode discharges, the separatrix density required to detach the outer divertors is approximately a factor 2 lower in the Super-X than the conventional configuration, in agreement with simulations. Detailed analysis of spectroscopy data from studies of the Super-X configuration reveal the importance of including plasma-molecule interactions and D 2 Fulcher band emission to properly quantify the rates of ionisation, plasma-molecule interactions and volumetric recombination processes governing divertor detachment. In H-mode with conventional and Super-X configurations, the outer divertors are attached in the former and detached in the latter with no impact on core or pedestal confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Validation study of RWM stability in DIII-D high- β N plasmas

The n = 1 (n is the toroidal mode number) resistive wall mode (RWM) stability is numerically investigated for two DIII-D high-β N discharges 176440 and 172461, utilizing the MARS-F (Liu et al 2000 Phys. Plasmas 7 3681) and MARS-K (Liu et al 2008 Phys. Plasmas 15 112503) codes. Systematic validation efforts are attempted, for the first time, for discharges with very slow or vanishing toroidal flow for a large fraction of the plasma volume. While gaining physics insights in accessing stable operation regime at β N exceeding the Troyon no-wall limit in these slow-rotation experiments, the predictive capability of fluid and non-perturbative magnetohydrodynamic-kinetic hybrid models for the RWM is further confirmed. The MARS-F fluid model, with a strong but numerically tunable viscosity mimicking ion Landau damping of parallel sound waves, finds complete stabilization of the n = 1 RWM in the considered DIII-D plasmas under the experimental flow conditions. Similarly, either full stabilization (for discharge 176440) or marginal stability (for discharge 172461) of the mode is computed by the MARS-K hybrid model, which is first-principle based without free model parameters. In particular, all drift kinetic resonances, including those of thermal and energetic particles, are found to synergistically act to marginally stabilize the RWM in discharge 172461. These MARS-F/K modeling results explain the experimentally observed stable operational regime in DIII-D, as far as the RWM stability is concerned. Extensive numerical sensitivity studies, with respect to the plasma toroidal flow speed as well as the radial location of the resistive wall, are also carried out to further support the validation study.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

FLARE: field line analysis and reconstruction for 3D boundary plasma modeling

The FLARE code is a magnetic mesh generator that is integrated within a suite of tools for the analysis of the magnetic geometry in toroidal fusion devices. A magnetic mesh is constructed from field line segments and permits fast reconstruction of field lines in 3D boundary plasma codes such as EMC3-EIRENE. Both intrinsically non-axisymmetric configurations (stellarators) and those with symmetry breaking perturbations of an axisymmetric equilibrium (tokamaks) are supported. The code itself is written in Modern Fortran with MPI support for parallel computing, and it incorporates object-oriented programming for the definition of the magnetic field and the material surface geometry. Extended derived types for a number of different magnetohydrodynamic equilibrium and plasma response models are implemented. The core element of FLARE is a field line tracer with adaptive step-size control, and this is integrated into tools for the construction of Poincaré maps and invariant manifolds of X-points. A collection of high-level procedures that generate output files for visualization is build on top of that. The analysis modules are build with Python frontends that facilitate customization of tasks and/or scripting of parameter scans.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A semi-automated algorithm for designing stellarator divertor and limiter plates and application to HSX

We present a semi-automated algorithm for designing three-dimensional divertor or limiter plates targeting low heat loads. The algorithm designs the plates in two stages: firstly, the parallel heat flux distribution is caught on vertically-inclined plates at one or several toroidal locations. Secondly, the power per unit area is reduced by stretching, tilting and bending the plates toroidally. Heat transport is modelled using the EMC3-Lite code, which uses an anisotropic diffusion model. We apply this scheme to HSX, a medium-sized stellarator located at the University of Wisconsin–Madison. Starting from the current machine with an extended vessel wall, we construct plates which are able to effectively catch and spread the heat for three different magnetic configurations. The scheme has a computational cost in the order of tens of CPU-minutes, making it a powerful tool for semi-automated plasma-facing component design in three-dimensional environments.

anisotropic diffusion↗
DOE OSTI2024

Plasma self-driven current in tokamaks with magnetic islands

Magnetic island perturbations may cause a reduction in plasma self-driven current that is needed for tokamak operation. A novel effect on tokamak self-driven current revealed by global gyrokinetic simulations is due to magnetic-island-induced 3D electric potential structures, which have the same dominant mode numbers as that of the magnetic island, whereas centered at both the inner and outer edge of the island. The non-resonant potential islands are shown to drive a current through an efficient nonlinear parallel acceleration of electrons. In large aspect ratio (large-A) tokamak devices, this new effect can result in a significant global reduction of the electron bootstrap current when the island size is sufficiently large, in addition to the local current loss across the island region due to the pressure profile flattening. It is shown that there exists a critical magnetic island width for large-A tokamaks beyond which the electron bootstrap current loss is global and increases rapidly with the island size. As such, this process may introduce a size limit for tolerable magnetic islands in large-A tokamak devices in the context of steady state operation. On the other hand, the current loss caused by magnetic islands in low-A tokamaks such as spherical tokamak (ST) NSTX/U is minor. The reduction of the axisymmetric current by magnetic islands scales with the square of island width. However, the loss of the current is mainly local to the island region, and the pace of current loss as the island size increases is substantially slower compared to large-A tokamaks. In particular, the bootstrap current reduction in STs is even smaller in the reactor-relevant high-β p regime where neoclassical tearing modes are more likely to develop.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Characterizing impurity sourcing and transport in the high temperature boundary of DIII-D wide pedestal QH-mode plasmas

Wide Pedestal QH-mode (WPQH) plasmas in the DIII-D tokamak show a sheath limited SOL, where electron density and temperature remain nearly constant along field lines from the midplane to the divertor. Consequently, parallel gradients are weak. The first Langmuir probe measurements in this regime point to a high sheath temperature with target electron temperature T e up to ~150 eV, leading to high carbon self-sputtering. Midplane carbon densities from SOLPS-ITER modeling of these plasmas in a double-null configuration fall far below experimental measurements unless full drifts are activated. In the drift-dependent SOLPS-ITER modeling, anomalous poloidally uniform, radially varying transport is adjusted to match measured radial electron temperature and density profiles in the pedestal and SOL region. The resulting carbon density (C6+) matches measured carbon densities just inside the separatrix. The C2+ density near the outer strike point is also consistent with spectroscopic imaging. With the ion B×∇B drift towards the X-point, carbon in the lower divertors is redistributed from the private flux region to the high field side (HFS) and pushed upstream in the SOL by poloidal E×B drifts. The B × ∇B drift dominates the radial flow of carbon as it moves upstream. Simulations with reversed toroidal field (ion B × ∇B drift away from the X-point) show a radically different behavior, where carbon accumulates on the low field side in lower divertors, and is pushed towards the HFS in the upper divertors, indicating a strong effect of particle drifts on impurity distribution. In double-null configurations which are usually used in WPQH plasmas, these drift effects tend to counterbalance, so that the carbon density and Z eff are reduced at the outer mid-plane only modestly, by around 7% in the modeling. Further predictive modeling indicates that the carbon density can be significantly reduced by an order of magnitude by implementing a single-null shape with reversed toroidal field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Predictive turbulence-driven flux model of scrape-off layer widths across confinement regimes in tokamaks

Reliable scrape-off layer (SOL) profile decay lengths predictions are needed to design and operate future tokamaks. The present manuscript describes a new model based on turbulent transport that is able to predict SOL widths for both L-mode and H-mode plasmas. The model is based upon the sheared-spectral filament paradigm (Peret et al (WEST Team) 2022 Phys. Plasmas 29 072306), however, incorporating the effects of thermal transport in order to calculate the parallel heat fluxes. The effects of magnetic shear and ExB shear on the cross-field transport are crucial to explain the shorter SOL decay lengths found in H-mode. The model is validated against a database of thousands of DIII-D L-mode and H-mode SOL profiles. We also calculate SOL decay length predictions in terms of plasma and engineer control parameters, which are in agreement with the multi-machine empirical H-mode scaling (Eich et al (ASDEX Upgrade Team and JET EFDA Contributors) 2013 Nucl. Fusion 53 093031), however, with an additional device geometry dependence. ITER SOL width predictions by the model are 3 times higher than the empirical scaling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Simulations of edge and SOL turbulence in diverted negative and positive triangularity plasmas

Optimizing the performance of magnetic confinement fusion devices is critical to achieving an attractive fusion reactor design. Negative triangularity (NT) scenarios have been shown to achieve excellent levels of energy confinement, while avoiding edge localized modes. Modeling turbulent transport in the edge and SOL is key in understanding the impact of NT on turbulence and extrapolating the results to future devices and regimes. Previous gyrokinetic turbulence studies have reported beneficial effects of NT across a broad range of parameters. However, most simulations have focused on the inner plasma region, neglecting the impact of NT on the outermost edge. In this work, we investigate the effect of NT in edge and scrape-off layer simulations, including the magnetic X-point and separatrix. For the first time, we employ a multi-fidelity approach, combining global, non-linear gyrokinetic simulations with drift-reduced fluid simulations, to gain a deeper understanding of the underlying physics at play. First-principles simulations using the GENE-X code demonstrate that in comparable NT and PT geometries, similar profiles are achieved, while the turbulent heat flux is reduced by more than 50% in NT. Comparisons with results from the drift-reduced fluid turbulence code GRILLIX suggest that the turbulence is driven by trapped electron modes. The parallel heat flux width on the divertor targets is reduced in NT, primarily due to a lower spreading factor S.

GENE-X↗
DOE OSTI2025

Aligning thermal and current quenches with a high density low-Z injection

The conventional approach for thermal quench (TQ) mitigation in a tokamak disruption is through a high- Z impurity injection that radiates away the plasma’s thermal energy before it reaches the wall. The downside is a robust Ohmic-to-runaway current conversion due to the radiatively clamped low post-thermal-quench electron temperature. An alternative approach is to deploy a low- Z (either deuterium or hydrogen) injection that aims to slow down the TQ, and ideally aligns it with the current quench (CQ). This approach has been investigated here via 3D MHD simulations using the PIXIE3D code. By boosting the hydrogen density, a fusion-grade plasma is dilutionally cooled at approximately the original pressure. Energy loss to the wall is controlled by a Bohm outflow condition at the boundary where the magnetic field intercepts a thin plasma sheath at the wall, in addition to Bremsstrahlung bulk losses. Robust MHD instabilities proceed as usual, while the collisionality of the plasma has been greatly increased and parallel transport is now in the Braginskii regime. The main conclusion of this study is that the decreased transport loss along open field lines due to a sufficient low- Z injection slows down the TQ rate to the order of 20 ms, aligned with the CQ timescale for a 15 MA ITER plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

On how avalanches penetrate the SOL and broaden heat loads

Recent experiments reported a correlation between power law core temperature spectra and Dα emission, suggesting that heat avalanches penetrate the SOL. This paper derives a threshold criterion for avalanche penetration using a reduced model. Avalanches with ($\bigtriangledown$$\tilde{T}$) rms > $\bigtriangledown$$\tilde{T}$ crit at the separatrix are predicted to penetrate, and so broaden the SOL and heat load distribution. $\bigtriangledown$$\tilde{T}$ crit is ~ 1/$τ$ ∥ , where $τ$ ∥ is the parallel heat flow time through the SOL. Penetration occurs when avalanches are strong enough to steepen sufficiently to shock at the separatrix. A positive correlation is found between the nonlinear drive for steepening and the penetration depth. In particular, penetration depth exceeds that of the heuristic drift limit when shocks form. Implications for numerical and physical experiments are also discussed.

SOL heat load↗
DOE OSTI2024

Robust wind farm layout optimization

Wake interactions in wind farms cause losses in annual energy production (AEP) on the order of 10%. Wind farm designers optimize the layout of the farm to mitigate wake losses, especially in the dominant site-specific wind directions. As wind turbines and wind farms grow in scale, optimization becomes more complex. Offshore wind farms regularly comprise more than 100 wind turbines and are characterized by complex boundaries due to shipping lanes, neighboring wind farms, and other constraints. Layout optimization methods are broadly split between gradient-based and gradient-free approaches. Gradient-based approaches can converge quickly and perform well for smaller, academic problems but are often sensitive to initial conditions and tuning parameters and require expert knowledge to use. On the other hand, gradient-free approaches can be more robust to problem complexities. We present a robust layout optimization approach based on a random search algorithm. The algorithm is intended for those who are not optimization experts and has few tuning parameters that need specification to achieve satisfactory results. Unlike off-the-shelf methods, which use generally available, non-domain-specific optimization routines that accept as inputs an optimization function and constraint definitions, this approach takes advantage of the relative computational costs of the different evaluations by evaluating cheaper computations first (boundary and minimum distance constraints) and running expensive AEP evaluations only if all other checks pass. Moreover, an outer genetic algorithm allows multiple solutions to evolve in parallel, enabling rapid solution development on high-performance computers. We discuss the relative ease of selecting necessary tuning parameters and demonstrate the efficacy of the genetic random search on a complex layout problem consisting of placing 70 turbines in a nonconvex and unconnected boundary region.

17 WIND ENERGY↗
DOE OSTI2024

Beam test performance studies of CMS Phase-2 Outer Tracker module prototypes

A new tracking detector will be installed as part of thePhase-2 upgrade of the CMS detector for the high-luminosity LHC era.This tracking detector includes the Inner Tracker, equipped withsilicon pixel sensor modules, and the Outer Tracker, consisting ofmodules with two parallel stacked silicon sensors. The Outer Trackerfront-end ASICs will be able to correlate hits from chargedparticles in these two sensors to perform on-module discriminationof transverse momenta (p$_{T}$). The p$_{T}$information is generated at a frequency of 40 MHz and will be usedin the Level-1 trigger decision of CMS. Prototypes of theso-called 2S modules were tested at the Test Beam Facility at DESYHamburg between 2019 and 2020. These modules use the finalfront-end ASIC, the CMS Binary Chip (CBC), and for the firsttime the Concentrator Integrated Circuit (CIC), optical readoutand on-module power conversion. In total, seven modules were tested,one of which was assembled with sensors irradiated with protons. Animportant aspect was to show that it is possible to read out modulessynchronously. A cluster hit efficiency of about 99.75 % wasachieved for all modules. The CBC p$_{T}$ discriminationmechanism has been verified to work together with the CIC andoptical readout. The measured module performance meets therequirements for operation in the upgraded CMS tracking detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Track reconstruction as a service for collider physics

Optimizing charged-particle track reconstruction algorithms is crucial for efficient event reconstruction in Large Hadron Collider (LHC) experiments due to their significant computational demands. Existing track reconstruction algorithms have been adapted to run on massively parallel coprocessors, such as graphics processing units (GPUs), to reduce processing time. Nevertheless, challenges remain in fully harnessing the computational capacity of coprocessors in a scalable and non-disruptive manner. This paper proposes an inference-as-a-service approach for particle tracking in high energy physics experiments. To evaluate the efficacy of this approach, two distinct tracking algorithms are tested: Patatrack, a rule-based algorithm, and Exa.TrkX, a machine learning-based algorithm. The as-a-service implementations show enhanced GPU utilization and can process requests from multiple CPU cores concurrently without increasing per-request latency. The impact of data transfer is minimal and insignificant compared to running on local coprocessors. This approach greatly improves the computational efficiency of charged particle tracking, providing a solution to the computing challenges anticipated in the High-Luminosity LHC era.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Elliptic multipoles and the modeling of narrow-gap bend magnets in accelerators

We highlight the virtues of 2D elliptic-multipole field expansions in modeling the magnetic fields of narrow-aperture, straight-axis bending magnets with parallel faces, addressing the limitations of the conventional circular multipole series when the beam-orbit sagitta exceeds the magnet's vertical half-gap. The elliptic multipoles provide a convenient way to represent the field in all aspects of the magnet development (design, particle-tracking simulations, measurements). We propose a numerically robust method of data analysis to determine the elliptic (or circular) multipoles from stretched-wire measurements with the wire moving on an arbitrary path.

Venturini, Marco↗
DOE OSTI2025

Performance of an X-γ ray detection system based on a thick silicon LGAD

We present the performance of a X-γ ray detection systems based on a 300 µm thick silicon low-gain avalanche diode (LGAD) and of an equivalent Diode structure without the gain layer, read-out by a custom-made low-noise charge amplifier. For the LGAD structure, the multiplication gains M s from 10.2 to 19.3 are measured, and the Equivalent Noise Charge (ENC) components have been studied in detail. As expected, a significant reduction of the white and 1/f voltage series and dielectric ENC components is observed with increasing gain, shortening the optimum peaking time to τ = 0.4÷8 μs depending on the gain value, with respect to the standard diode, while the parallel ENC component increases proportionally to the gain up to M s = 15. Setting the gain M s = 12.7, a minimum ENC = 34.5 electrons r.m.s. (298 eV FWHM) at τ = 1 μs is found. However, the electronic noise, evaluated on the pulser FWHM, is found to only marginally contribute to the width of the spectral lines of a radioactive source, which are dominated instead by the statistical noise of the charge multiplication within the LGAD structure. The spectral lines' excess width is found to be proportional to the signal multiplication gain M s and increases with the energy of the photons. A minimum line width of 850 eV FWHM at 13.9 keV is measured at room temperature, τ = 2 μs and a gain M s = 10.2.

47 OTHER INSTRUMENTATION↗