Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

The thermopower in the temperature range T(sub c)-1000K and the bank spectrum of Bi-based superconductors

The temperature dependencies of thermopower, S, in the range T = T(sub c)-1000K as well as of resistivity and Hall coefficient in the range T = T(sub c)-300K for the single-phase ceramic samples Bi2Sr2Ca(1-x)Nd(x)Cu2O(y) have been measured. It was found that the S(T) dependencies in normal phase have three characteristic regions. Despite the fact that the S(T) dependencies in Bi-based high-T(sub c) superconductors (HTSC) differ essentially from ones in Y-based HTSC at T = T(sub c)-300K, the main feature of theirs (S(T) = const at high temperatures) retains in samples investigated at T is greater than 620K. The results obtained have been analyzed on the basis of the narrow-band model with the use of assumption of slight asymmetry of the conductive band. The band spectrum parameters of the samples studied have been calculated. An analysis of the tendencies in these parameters changes with samples composition varying enables to make the conclusion about the similarity of the main features of the conductive band structure in Y- and Bi-based HTSC.

Gasumyants, V. E.↗
NASA NTRS2022

Treatment of Launch Vehicle Flight Control Stability Margin Reductions for Crewed Missions with Emphasis on Slosh Dynamics

NESC’s perspective for crewed spaceflight: Acceptance of flight control gain/phase stability margin reductions from industry standards should be accompanied by an adequately extensive technical treatment, including: •Analyzing the fundamental physics involved, with applicable simulation tool verification (particularly if results are dissimilar among rules of thumb, linear tools, nonlinear analysis, and flight data) •Conducting sensitivity studies in time and frequency domains to analyze effects of possible parameter and system variations •Studying the effects of the consequence of instability associated with offending modes by running stressing cases in time domain •Assessing alternative flight control designs to demonstrate that present design appropriately balances overall vehicle risk (i.e., quantitatively delineate chosen tradeoffs between various stability margins and vehicle performance in the context of risk/consequence) Work presented here represents an example summary of expected engineering work to flight-certify crewed missions with unstable slosh modes and reduced stability margins

Launch Vehicle Flight Control↗
DOE OSTI2025

Design Initiative for a 10 TeV pCM Wakefield Collider

This document outlines a community-driven Design Study for a 10 TeV pCM Wakefield Accelerator Collider. The 2020 ESPP Report emphasized the need for Advanced Accelerator R&D, and the 2023 P5 Report calls for the ``delivery of an end-to-end design concept, including cost scales, with self-consistent parameters throughout." This Design Study leverages recent experimental and theoretical progress resulting from a global R&D program in order to deliver a unified, 10 TeV Wakefield Collider concept. Wakefield Accelerators provide ultra-high accelerating gradients which enables an upgrade path that will extend the reach of Linear Colliders beyond the electroweak scale. Here, we describe the organization of the Design Study including timeline and deliverables, and we detail the requirements and challenges on the path to a 10 TeV Wakefield Collider.

43 PARTICLE ACCELERATORS↗
NASA NTRS2024

Intrastep, Stage-Value Predictors for Diagonally-Implicit Runge-Kutta Methods

To better identify the necessary attributes of good stage-value predictors (SVPs), numerous SVPs are designed for an existing: ESDIRK4(3)7L[2]SA [26] and a new: ESDIRK4(3)8L[2]SA scheme.1 Both are stifflyaccurate, stage-order two, explicit, singly-diagonally implicit Runge–Kutta (ESDIRK) schemes. Tradeoffs are studied in the parameter spaces enforcing the constraints on accuracy, linear stability, nonlinear stability and coefficient size to determine which objectives correlate with effective predictors. The SVPs are tested on three challenging external aerodynamics problems [107 − 108 degrees of freedom (DoFs)], each with a different level of stiffness. The problems include two 3D airfoils simulations and one canonical turbulence simulation. All simulations use the compressible Navier-Stokes equations (CNSE). An entropy stable spectral collocation formulation is used for discretizing the spatial terms in the equations. Simulations are performed at a wide variety of temporal error tolerances. Problems that are sufficiently stiff (e.g., lax temporal error tolerances) benefit from SVPs designed with second-order accuracy and stability properties: A-stability, and L-stability, rather than high accuracy constraints. Simulations with modest stiffness (e.g., strict error tolerances) are better suited for SVPs designed using high accuracy constraints. Designing SVPs with enhanced stability properties is tedious but worthwhile. Simulation times are reduced with optimal SVPs by as much as 100% on some stages, with combined stepwise improvements of between 50 − 100% for both methods. A comparative study is performed with the two aforementioned methods as well as four other ESDIRKs. The newly designed ESDIRK4(3)8L[2]SA with γ ≈ 1/10, proves to be the most efficient of the six tested ESDIRK schemes simulating the CNSE.

Diagonally-Implicit Runge-Kutta↗
DOE OSTI2025

Updating Critical Temperature Calculations for Several Secondary High Explosives

In designing experiments where high explosives (HEs) are heated, it is important to have an understanding of where thermal runaway may occur. This determination is often done by using the Frank-Kamenetskii (FK) equation. For several highly-studied HEs, the parameters necessary for FK calculations are typically referenced from decades-old literature, and more recent experimental data have shown that these values require adjustment. For example, some of the legacy parameters dangerously overpredict the critical temperature by tens of degrees relative to more recent observed values. Herein, we first summarize historical results and highlight the importance of insulation effects when estimating critical temperatures for small samples, which is especially relevant to small-scale aging, compatibility, and characterization experiments. Here, we then present updated FK parameters for several common secondary CHNO HEs like RDX, HMX, PETN, and TATB, as well as the first reported values for 2,6-Diamino-3,5-dinitropyrazine-1-oxide (LLM-105). Our updated parameters produce critical-temperature curves that are consistent with both mm-scale differentical scanning calorimetry (DSC) measurements and cm-scale data from the Lawrence Livermore National Laboratory one-dimensional time-to-explosion (ODTX) experiment. In analyzing the critical temperature versus sample size curves derived from the transcendental FK equation, we discovered that these curves are remarkably well described by a simple power-law function with a universal power of 0.142 and a HE-specific scaling factor.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

Artificial neural networks estimate evapotranspiration for Miscanthus × giganteus as effectively as empirical model but with fewer inputs

Estimating actual evapotranspiration (ET) is particularly crucial for addressing how vegetation affects the water balance of ecosystems. ET estimation can be complex with empirical models due to their many parameters and reliance on aridity. In contrast, artificial neural networks (ANNs) could potentially estimate ET with fewer and more common meteorological parameters. In this study, we trained two ANNs, one using a feed-forward approach (FFN) and the other a nonlinear auto-regressive network (NARX), to predict ET and compared them to the commonly used empirical model Granger and Gray (GG). We trained our models on a nine-year eddy covariance (EC) dataset for Miscanthu s × giganteus ( M . × giganteus ) from Illinois (UIEF), then tested them using out-of-sample data from both UIEF and a different location in Iowa (SABR) to compare the accuracy of FFN, NARX, and GG models in estimating daily ET. A combination of air temperature (T a ) and solar radiation (R s ) was chosen as inputs due to the highest R 2 for FFN (R 2 = 0.79, 0.81, and 0.79 for training, testing, and validation, respectively) and only T a for NARX (R 2 = 0.70 for out-of-sample validation). The predictive power of the FFN model was superior to the NARX and GG models at the UIEF site (R 2 = 0.84, 0.70, and 0.83 for out-of-sample validation, respectively). Our analysis showed that ANN approaches are as accurate as empirical approaches for estimating ET but use fewer inputs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

High Speed Impact Testing of UHMWPE Composite Using Orthogonal Arrays

Abstract Background Ultra high molecular weight polyethylene composites are fiber based composites used in armor applications. While some characterization has been conducted experimentally, this study varies multiple parameters simultaneously to investigate material response under a wide range of conditions. Objective This work focuses on characterizing the response of Dyneema ® HB26 hard laminate composites under high-speed impacts to examine the influence of plate diameter, clamping pressure, and plate spacing on target performance. Additionally, micro Computer Tomography scans are used to nondestructively evaluate the damage evolution in the targets. Methods These scan results are used in concert with more traditional armor performance metrics to evaluate the effect of various parameters using the method of orthogonal array analysis. This technique allows for multiple variables to be investigated in the same test series, saving time and budget while still providing quality results across a range of variables and variable values. Results We conclude that of the parameters investigated, the plate spacing parameter has the largest effect on performance, followed by the plate diameter. Bolt torque was found to not have a significant impact on results, indicating that an edge clamping pressure is not critical to material response. Additionally, by examining the high resolution scans, we can quantify the damage with an effective damage angle and that this angle is a good predictor of performance. Conclusion Finally a damage theory involving the effective bending strength of the plates is discussed as an explanation for all of the results observed in this test series.

Hannah, T. (ORCID:0000000230261362)↗
DOE OSTI2025

A simplified CFD approach for modeling mass transport in catalytic open-cell foams

A simplified macroscopic CFD approach is presented to model mass transport including chemical reactions in washcoated open-cell foams. The foam is treated as a porous medium. Species conversion during chemical reactions is modeled using appropriate source terms based on reaction rate expressions and modified to account for the mass transport resistances occurring at the fluid-washcoat interfaces and within the washcoat layers. As example, the catalytic CO oxidation over platinum is studied. The simulation results show good agreement with experimental data from literature. A parametric study on washcoat parameters, such as thickness, tortuosity, porosity, and size, is carried out. Increasing the washcoat thickness from 5 to 100 µm or decreasing the tortuosity to porosity ratio from 5 to 20 decreases the CO conversion by 10 %. The proposed model is found to be reliable and has the advantage of lower computational cost, making it a suitable tool for foam-based catalytic reactor design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

MITgcm-AD v2: Open source tangent linear and adjoint modeling framework for the oceans and atmosphere enabled by the Automatic Differentiation tool Tapenade

The Massachusetts Institute of Technology General Circulation Model (MITgcm) is widely used by the climate science community to simulate planetary atmosphere and ocean circulations. A defining feature of the MITgcm is that it has been developed to be compatible with an algorithmic differentiation (AD) tool, TAF, enabling the generation of tangent-linear and adjoint models. These provide gradient information which enables dynamics-based sensitivity and attribution studies, state and parameter estimation, and rigorous uncertainty quantification. Importantly, gradient information is essential for computing comprehensive sensitivities and performing efficient large-scale data assimilation, ensuring that observations collected from satellites and in-situ measuring instruments can be effectively used to optimize a large uncertain control space. As a result, the MITgcm forms the dynamical core of a key data assimilation product employed by the physical oceanography research community: Estimating the Circulation and Climate of the Ocean (ECCO) state estimate. Although MITgcm and ECCO are used extensively within the research community, the AD tool TAF is proprietary and hence inaccessible to a large proportion of these users. The new version 2 (MITgcm-AD v2) framework introduced here is based on the source-to-source AD tool Tapenade, which has recently been open-sourced. Another feature of Tapenade is that it stores required variables by default (instead of recomputing them) which simplifies the implementation of efficient, AD-compatible code. The framework has been integrated with the MITgcm model’s main branch and is now freely available.

Adjoints↗
DOE OSTI2025

Evaluating the bond strength and fracture mechanisms of cold-sprayed zinc coating on AZ91 magnesium substrate via a combined experimental and computational approach

Magnesium (Mg) alloys are ideal candidates for automotive applications due to their high strength to weight ratio, castability, recyclability etc., however, they lack corrosion and oxidation resistance. Solid-state deposition techniques, such as cold spray, have been demonstrated to enhance their corrosion resistance as it relies on the severe plastic deformation of powder particles upon impact with the substrate to form a metallurgical bond with the substrate and within the coating. At cold sprayed interfaces, a heterogeneous microstructure is formed that includes some porosity, oxides and intermetallics which can significantly affect coating performance. Thus, establishing a direct correlation between the interface microstructure and its properties can aid in designing optimal cold spray parameters. In this study, we investigated the microstructure and mechanical properties of a zinc (Zn) coating deposited on a high pressure die cast (HPDC) AZ91 Mg substrate via high resolution scanning transmission electron microscopy, in situ micro-tensile testing, and finite element method (FEM) modeling. Micro-tensile pillars fabricated using the plasma focused ion beam (PFIB) successfully isolates the coating-substrate interface within the gauge length. The average bond strength of Zn-Mg interface was determined to be ∼140 MPa with failure occurring partially at the interface and mostly into the coatings. A detailed microstructural characterization revealed evidence of a strong metallurgical bonding at the Zn-Mg interface and formation of the C14 MgZn 2 laves phase interlayer resulting in a mixed mode of fracture during the micro-tensile experiments. FEM modeling reveals the stress distribution along the interfaces and suggests that a MgZn 2 layer thickness between 200–400 nm is optimum to increase the bond strength and minimize the triaxiality. Such a site-specific interfacial analysis with correlative computational modeling provides crucial insight into the overall performance of cold spray interfaces.

Bond strength↗
DOE OSTI2024

Influence of porous aluminosilicate grain size materials in experimental and modelling Cs + adsorption kinetics and wastewater column process

This paper focuses on the influence of the grain size of a geopolymer based adsorbent on its Cs + adsorption performances both in batch and fixed-bed process. The geopolymer phase was used as a binder to support NaY zeolite particle in a 20 wt% charged porous composite with 160 m 2 .g –1 of porous surface area. These samples were shaped with three grain sizes (50 /100/500 µm) to remove 80–90 mg/g of Cs + in batch and column operations. After their microstructural and porous characterizations, their efficiency and adsorption characteristics were investigated through adsorption isotherms and kinetic in the two processes. While the grain size has no influence on the maximal extraction capacity of the adsorbent, it strongly affects the sorption kinetic. By coupling experimental data and a modelling approach, the complex sorption mechanism was highlighted, suggesting a new insight of the contaminant sorption kinetic. Then, comparison of batch and column adsorption experiments illustrates the detailed explanation of various process parameters for column study. The results show challenges for fixed-bed column utilization by the choice of the appropriate grain size as a compromise between the material sorption kinetic and hydrodynamic considerations. Furthermore, this is of high importance to more accurately optimize the design of column adsorption to assess the transport of Cs+ in multi-porous tailored grain size materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Development and experimental evaluation of an acoustic flow meter prototype for measuring air flow

Here, this study outlines the development and testing of a flow meter prototype specifically designed for use in nuclear reactor environments. The meter uses flow-induced vibration to measure flow rates and is designed for remote monitoring in harsh environments where radiation can damage electronics. The device generates a vibration signal produced by a feedback system when fluid flows out of an orifice and interacts with a downstream wedge. The frequency of the vibration signal corresponds directly to flow rate and velocity. The study investigates geometric parameters intrinsic to the prototype, such as orifice height, width, edge distance, and chamber length. Different configurations were also tested, including a bypass loop with variable cross-sections around the device. The investigation results reveal the impact of these geometric parameters on the vibration signal output, providing valuable insights for future design improvements and enhancing the effectiveness of flow metering systems used in nuclear reactor applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Fluorescence Signatures of Rare Earth Metals during Precipitation in Various Conditions

Fluorescence spectroscopy is a widely used sensor methodology that analyzes light emitted from a compound or element as it decays from an excited state. This technique is very sensitive and selective, which is ideal to characterize analytes at lower limits of detection. Key example targets of significant industry and research interest include rare earth elements (REEs) such as dysprosium (Dy) and europium (Eu). These are widely used in advanced technologies including semiconductors, electric vehicle motors, lasers, and permanent magnets. Identifying new sources and responsible reutilization of REEs is essential, and new approaches to extract and recycle REEs could be notably enhanced through the integration of on-line sensors. The sensors can support faster process design, informed scale-up, and cost-effective deployment. This study covers the initial exploration of applying fluorescence-based on-line monitoring to REEs within a precipitation process. This study demonstrates the successful scale-up of a fluorescence -based sensing approach, from stationary cuvettes and small-volume microfluidic devices to continuous flow systems operating at the bench scale (10-25mL). This work also provides initial insight into the challenges of signal’s effects and utility within a turbid environment. Using a modular design for monitoring flowing solutions in a flow tube, fluorescence can be characterized for a variety of analytical targets. In this study, detection performance parameters between the cuvette and flow tube system were compared. Additionally, the response of Dy during precipitation by sodium bicarbonate in the two measurement designs was explored. This letter represents a starting point to bridge the gap between traditional fluorescence sensor measurements in a cuvette to future developments that explore the ability to integrate fluorescence sensors into extraction and separation processes at industrially relevant scales.

fluorescence↗
DOE OSTI2025

A MOOSE-Based Model for Fission Product Transport and Source Term Estimation for High-Temperature Gas-Cooled Reactors

Thanks to fuel elements containing tristructural isotropic (TRISO) particles combined with a low core power density and passive feedback mechanisms leading to modest temperature rises in the event of accidental events, high-temperature gas-cooled reactors (HTGRs) offer a high degree of reliability in terms of fission product retention. While the anticipated source term for HTGRs is expected to be very low, it is important to provide a quantitative estimate of radiological releases during nominal and accidental conditions. Here, we propose a computationally efficient mechanistic source term methodology relying on the Multiphysics Object Oriented Simulation Environment (MOOSE) for tracking fission product transport from TRISO particles up to the coolant pressure boundary, as well as modeling the transport and potential deposition of these nuclides inside the reactor coolant loop. The proposed computational scheme is applied to estimate source term inventories for a representative 10-MW(thermal) prismatic high-temperature microreactor and is qualitatively compared against known release fractions. In addition to providing an alternate analysis tool, this MOOSE model can help reactor designers quantify the influence of key design parameters relevant for studies of radiological dose consequences.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

TRANSP-TGLF core predictive modeling of the JET DT baseline scenario

In recent years, an intense modeling activity has been focused on preparing and analyzing the second JET Deuterium–Tritium (D–T) experimental campaign DTE2. Among the numerous scientific outcomes of this campaign was the unique opportunity to test and validate the state of the art of modeling tools with fusion-relevant DT plasmas using the full metallic ITER-like wall in different scenarios. This work reports on the core predictive modeling of plasma density, electron and ion temperatures (n e , T e , T i ) performed using TRANSP (Pankin et al 2025 Comput. Phys. Commun. 312 109611) coupled with Trapped Gyro-Landau Fluid (TGLF)-SAT2 (Kinsey et al 2008 Phys. Plasmas 15 055908), (Staebler et al 2021 Nucl. Fusion 61 116007) for the JET D–T baseline scenario (I p = 3.5 MA, q 95 = 3, β N < 2, with pellet pacing) (Garzotti et al 2025 Plasma Phys. Control. Fusion 67 075011). The sensitivity to different input parameters, as the $\vec{E}$ x $\vec{B}$ shear parameterization and the values of the kinetic quantities at the boundary of the prediction domain (ρ = 0.85) has been assessed, identifying the confidence interval of the prediction results. In particular, the dependence of the electron density profile on the particle source parameters has been studied, identifying the ionization source as the main cause for the density gradient under-prediction obtained by TRANSP-TGLF, reported in (Hyun-Tae et al 2023 Nucl. Fusion 63 112004).

JET↗
DOE OSTI2025

High-frequency gravitational wave detection by the BREAD experiment

The use of experiments searching for light axion dark matter as high-frequency gravitational wave detectors has garnered increasing attention in recent years. We explore the capabilities of the Broadband Reflector Experiment for Axion Detection (BREAD) in probing the GW parameter space and study the directional dependence of its coverage. This detector can investigate frequencies ranging from 0.05 to 200 THz. We find that by employing single photon detectors, BREAD is sensitive to GWs with characteristic strains as low as 10 −21 at 0.1 THz and 10 −25 at 200 THz with a year exposure time, making it competitive with other proposals operating at similar frequencies.

axions↗
DOE OSTI2024

Photometric redshifts and intrinsic alignments: Degeneracies and biases in the 3 × 2 pt analysis

We present a systematic study of cosmological parameter bias in weak lensing and large-scale structure analyses for upcoming imaging surveys induced by the interplay of intrinsic alignments (IA) and photometric redshift (photo-z) model misspecification error. We first examine the degeneracies between the parameters of the tidal alignment–tidal torquing (TATT) model for IA and of a photo-z model including a mean shift ( Δ z ¯ ) and variance ( σ z ) for each tomographic bin of lenses and sources, under a variety of underlying true IA behaviors. We identify strong degeneracies between: (1) the redshift scaling of the tidal alignment amplitude and the mean shift and variances of source bins, (2) the redshift scaling of the tidal torquing amplitude and the variance of the lowest- z source bin, and (3) the IA source density weighting and the mean shift and variance of several source bins. We then use this information to guide our exploration of the level of cosmological parameter bias which can be induced given incorrect modeling of IA, photo-z, or both. We find that marginalizing over all the parameters of TATT is generally sufficient to preclude cosmological parameter bias in the scenarios we consider. However, this does not necessarily mean that IA and photo-z parameters are themselves unbiased, nor does it mean that the best-fit model is a good fit to the data. We also find scenarios where the inferred parameters produce χ d . o . f . 2 values indicative of a good fit but cosmological parameter bias is significant, particularly when the IA source density weighting parameter is not marginalized over. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗