Stabilization of a nanoporous NiCu dilute alloy catalyst for non-oxidative ethanol dehydrogenation
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
SEARCH · Search NASA
Results for “selective doping”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
NASA Tech Briefs, June 2011
Topics covered include: Wind and Temperature Spectrometry of the Upper Atmosphere in Low-Earth Orbit; Health Monitor for Multitasking, Safety-Critical, Real-Time Software; Stereo Imaging Miniature Endoscope; Early Oscillation Detection Technique for Hybrid DC/DC Converters; Parallel Wavefront Analysis for a 4D Interferometer; Schottky Heterodyne Receivers With Full Waveguide Bandwidth; Carbon Nanofiber-Based, High-Frequency, High-Q, Miniaturized Mechanical Resonators; Ultracapacitor-Based Uninterrupted Power Supply System; Coaxial Cables for Martian Extreme Temperature Environments; Using Spare Logic Resources To Create Dynamic Test Points; Autonomous Coordination of Science Observations Using Multiple Spacecraft; Autonomous Phase Retrieval Calibration; EOS MLS Level 1B Data Processing Software, Version 3; Cassini Tour Atlas Automated Generation; Software Development Standard Processes (SDSP); Graphite Composite Panel Polishing Fixture; Material Gradients in Oxygen System Components Improve Safety; Ridge Waveguide Structures in Magnesium-Doped Lithium Niobate; Modifying Matrix Materials to Increase Wetting and Adhesion; Lightweight Magnetic Cooler With a Reversible Circulator; The Invasive Species Forecasting System; Method for Cleanly and Precisely Breaking Off a Rock Core Using a Radial Compressive Force; Praying Mantis Bending Core Breakoff and Retention Mechanism; Scoring Dawg Core Breakoff and Retention Mechanism; Rolling-Tooth Core Breakoff and Retention Mechanism; Vibration Isolation and Stabilization System for Spacecraft Exercise Treadmill Devices; Microgravity-Enhanced Stem Cell Selection; Diagnosis and Treatment of Neurological Disorders by Millimeter-Wave Stimulation; Passive Vaporizing Heat Sink; Remote Sensing and Quantization of Analog Sensors; Phase Retrieval for Radio Telescope and Antenna Control; Helium-Cooled Black Shroud for Subscale Cryogenic Testing; Receive Mode Analysis and Design of Microstrip Reflectarrays; and Chance-Constrained Guidance With Non-Convex Constraints.
Source record↗
Chemical Sensor Development and Antibacterial Activities Based on Polyaniline/Gemini Surfactants for Environmental Safety
The polyaniline doped novel anionic gemini surfactant (PANI/GS) was chemically synthesized by a micellar polymerization process and then characterized in details by X-ray powder diffractometry, scanning electron microscopy, and FTIR spectroscopy. The results show the presence of polyaniline in the emeraldine base was formed by doping with gemini surfactant. The thermal properties of the composites were studied by carrying out thermal gravimetric analysis. The PANI/GS were found to be soluble in common organic solvents such as chloroform as well as DMSO. The antibacterial activity of the obtained PANI/GS was also evaluated against Gram positive bacteria Bacillus subtilis, Gram negative bacteria Escherichia coli and antibiotics (Amoxicillin) using the agar plate. The antibacterial study showed that the PANI/GS was found to be most effective against both B. subtilis and E. coli respectively which was significant compared to the amoxicillin. Beside that thin-layer of PANI/GS onto glassy carbon electrode (GCE) was fabricated with conducting 5% nafion coating agents to fabricate a sensitive and selective Cd{sup 2+} ionsic sensor in short response time into the phosphate buffer phase. The fabricated cationic-sensor was exhibited higher sensitivity, large-dynamic concentration ranges, long-term stability, and improved electrochemical performances towards Cd{sup 2+} ions. The calibration plot is linear (r{sup 2}, 0.9799) over the large Cd{sup 2+} concentration ranges (10.0 nM–1.0 mM). The sensitivity and detection limit is calculated as 2.324 µA µM{sup −1}cm{sup −2} and 6.85 nM (signal-to-noise ratio, at a SNR of 3) respectively. These novel efforts are intiated a well-known method for significant cationic sensor development with directly fabricated nanocomposite onto GCE for the detection of hazardous toxins in ecological and environmental fields in huge scales. Graphical Abstract: .
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Polypyrrole-Coated Perfluorocarbon Nanoemulsions as a Sono-Photoacoustic Contrast Agent
A new contrast agent for combined photoacoustic and ultrasound imaging is presented here. It has a liquid perfluorocarbon (PFC) core of about 250 nm diameter coated by a 30 nm thin polypyrrole (PPy) doped polymer shell emulsion that represents a broadband absorber covering the visible and near-infrared ranges (peak optical extinction at 1050 nm). When exposed to a sufficiently high intensity optical or acoustic pulse, the droplets vaporize to form microbubbles providing a strong increase in imaging sensitivity and specificity. The threshold for contrast agent activation can further drastically be reduced by up to 2 orders of magnitude if simultaneously exposing them with optical and acoustic pulses. The selection of PFC core liquids with low boiling points (i.e., perfluorohexane (56 °C), perfluoropentane (29 °C), and perfluorobutane (–2 °C)) facilitates activation and reduces the activation threshold of PPy-coated emulsion contrast agents to levels well within clinical safety limits (as low as 0.2 MPa at 1 mJ/cm 2 ). Finally, the potential use of these nanoemulsions as a contrast agent is demonstrated in a series of phantom imaging studies.
42 ENGINEERING↗
Quantum magnetism of iron-based ladders: Blocks, spirals, and spin flux
Motivated by increasing experimental evidence of exotic magnetism in low-dimensional iron-based materials, we present a comprehensive theoretical analysis of magnetic states of the multiorbital Hubbard ladder in the orbital-selective Mott phase (OSMP). Here, the model we used is relevant for iron-based compounds of the AFe 2 X 3 family (where A=Cs, Rb, Ba, K are alkali metals and X=S, Se are chalcogenides). To reduce computational effort, and obtain almost exact numerical results in the ladder geometry, we utilize a low-energy description of the Hubbard model in the OSMP—the generalized Kondo-Heisenberg Hamiltonian. Our main result is the doping vs interaction magnetic phase diagram. We reproduce the experimental findings on the AFe 2 X 3 materials, especially the exotic block magnetism of BaFe 2 Se 3 (antiferromagnetically coupled 2×2 ferromagnetic islands of the ↑↑↓↓ form). As in recent studies of the chain geometry, we also unveil block magnetism beyond the 2×2 pattern (with block sizes varying as a function of the electron doping) and also an interaction-induced frustrated block-spiral state (a spiral order of rigidly rotating ferromagnetic islands). Moreover, we predict new phases beyond the one-dimensional system: a robust regime of phase separation close to half filling, incommensurate antiferromagnetism for weak interaction, and a quantum spin-flux phase of staggered plaquette spin currents at intermediate doping. Finally, exploiting the bonding/antibonding band occupations, we provide an intuitive physical picture giving insight into the structure of the phase diagram.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Optimization of Ag Electrocatalyst Performance for CO2 to CO Conversion: Pairing Atomic Simulations with Experiments
Density-functional theory- based calculations that complement our series of experimental efforts on optimizing Ag electrocatalyst performance for CO2 to CO conversion were presented. Three key findings are drawn out from the combined UHV surface science, STM and electrochemical measurements: (1) Using a series of Ag nanoparticles with 2-6 nm average diameters, CO2 reduction reaction (CO2RR) activity increases, with particle between 2 nm and ∼4 nm demonstrating the highest combination of activity and selectivity; (2) Electronic metal−support interactions (EMSIs) between Ag and C dramatically improve CO2RR performance as evidenced by a scaling relationship between particle size and the relative Ag−C EMSIs strength, which improves the CO2-to-CO Faradaic efficiency of sub-2 nm Ag particles from 2 to ∼100% and increases the CO turnover frequency ∼15-fold compared with similarly sized bare Ag particles; (3) The performance Ag electrocatalysts is improved when supported on S-doped C materials. Computational modeling of 1−10 nm Ag particles predicts a nearly identical size-dependent trend with maximum CO2RR activity predicted for 3.7nm particles. The calculations support the promotional effect of C materials, showing a large charge transfer of 1.02 e from Ag clusters to defective C and a 0.41 eV less endergonic step of forming COOH intermediate on Ag/defective-C compared to the Ag/C system. Calculations indicate a more favorable energetic pathway of CO2-to-CO at the C-S-Ag interface, consistent with experiments.
CO2 utilization↗
Cubic GaS: A Surface Passivator For GaAs
Thin films of cubic form of gallium sulfide (GaS) formed on surfaces of gallium arsenide (GaAs) substrates via metal/organic chemical vapor deposition (MOCVD). Deposited cubic GaS, crystalline lattice matched to substrate GaAs, neutralizes electrically active defects on surfaces of both n-doped and p-doped GaAs. Enabling important GaAs-based semiconducting materials to serve as substrates for metal/insulator/semiconductor (MIS) capacitors. Cubic GaS enables fabrication of ZnSe-based blue lasers and light-emitting diodes. Because GaS is optically transparent, deposited to form window layers for such optoelectronic devices as light-emitting diodes, solar optical cells, and semiconductor lasers. Its transparency makes it useful as interconnection material in optoelectronic integrated circuits. Also useful in peeled-film technology because selectively etched from GaAs.
Hepp, Aloysius F.↗
A novel, mesoporous molybdenum doped titanium dioxide/reduced graphene oxide composite as a green, highly efficient solid acid catalyst for acetalization
A novel, mesoporous composite of Mo doped TiO 2 /reduced graphene oxide is synthesized to be used as a highly efficient heterogeneous acid catalyst. The composite has a high surface area (263 m 2 g -1 ) and a monomodal pore size distribution with an average pore diameter of 3.4 nm. A comprehensive characterization of the synthesized material was done using PXRD, Raman, BET, SEM, EDX, TEM, TGA, and XPS. The composite exhibited excellent catalytic activity (1.6 h -1 TOF, >99% GC yield, and >99% selectivity) towards acetalization of cyclohexanone at room tempertaure within 30 minutes. The catalyst was reusable up to 4 reaction cycles without any significant loss in the activity and the acidic site calculations showed that the reaction is mostly driven by the weak acidic sites on the composite.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Structural Tuning of Self‐Conductive Polymer as Gas Diffusion Layer for Electrocatalytic Reactions at High Current
Electrocatalytic conversions offer a promising route for sustainable chemical production using renewable energy. Gas diffusion layers (GDLs) enable selective product formation at high current densities but suffer from electrolyte flooding, and polytetrafluoroethylene (PTFE)-based GDLs typically require metal conductive layers, which constrain catalyst development. A recently developed GDL configuration, electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT)-coated PTFE, demonstrates notable flooding resistance, but suffers from gas diffusion limitations at elevated currents due to limited gas diffusion through the PEDOT layer. Here, different dopants in PEDOT are exploited to modify the physical properties and enhance gas transport. ClO 4 − -doped PEDOT exhibits superior performance due to optimized physical structure, leading to increased gas permeance and faradaic efficiency (FE) for CO production during electrocatalytic CO 2 reduction. Further optimization of coverage and thickness achieved by adjusting charge density led to an optimal configuration at 33 mC cm −2 . This GDL supports various metal electrocatalysts and demonstrates FE CO of > 90% for over 150 h at −200 mA cm −2 using a commercial silver electrocatalyst. This work highlights the importance of GDL engineering in enhancing performance and durability for long-term electrocatalytic processes.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
TU-H-206-03: Characterizing B1 Inhomogeneities in DCE MRI
Purpose: Dynamic Contrast Enhanced (DCE) MRI is a valuable technique for measuring perfusion and permeability characteristics of tumors. Exogenous contrast concentrations are calculated based on changes in T{sub 1} measured using fast 3D gradient echo (FLASH) sequences. However, the slab selective pulses used in 3D MRI may result in B{sub 1} inhomogeneities across the volume of interest that can lead to errors in T{sub 1} and thus the estimated gadolinium concentration. We compared three FLASH DCE sequences (GRE, TWIST, and VIBE) to determine their signal homogeneity across slices and the accuracy in calculating T{sub 1} using acquisitions with variable flip angles. Methods: The sequences were tested at 3 T on a Siemens mMR (VB20P) using a doped water phantom 3.75 g/L NiSO{sub 4} - 6H{sub 2}O + 5 g/L NaCl (T{sub 1} = 104 ms) and a 2% agar, 0.67% NaCl phantom (T{sub 1}= 1.71 s). 2D EPI B{sub 1} maps and inversion recovery T{sub 1}maps were acquired for ground truth. 3D MRI was acquired at different flip angles to generate a T{sub 1} map. Regions of interest were drawn to measure signal inside the phantoms as a function of slice position. The T{sub 1} for each slice ROI was fit to the FLASH steady-state model of magnetization. Results: Based on the data, GRE gave the most uniform signal homogeneity and T{sub 1} values in the middle slices of the 3D volume. The 3D VIBE sequence had the largest region of signal inhomogeneity compared to the 3D GRE and TWIST sequences. VIBE’s B{sub 1} inhomogeneity is inconsistent at low flip angles. However, VIBE resulted in more slices with T{sub 1} values similar to the ground truth. Conclusion: The central 1/3 of the slices yielded signals that result in T{sub 1} fits consistent with the ground truth. However, the remaining slices required some form of B{sub 1} inhomogeneity correction for quantitative DCE analysis. The research was supported in part by NIH NCI Grant R01CA159471.
60 APPLIED LIFE SCIENCES↗
Selected developments in laser wire stripping
The operation of mechanical and thermal strippers and the early development of laser wire strippers are reviewed. NASA sponsored development of laser wire stripping for space shuttle includes bench-type strippers as well as an advanced portable hand-held stripper which incorporates a miniaturized carbon dioxide laser and a rotating optics unit with a gas-jet assist and debris exhaust. Drives and controls girdle the wire and slit the remaining slug without manual assistance. This unit can strip wire sizes 26 through 12 gage. A larger-capacity hand-held unit for wire sizes through 1/0 gage was built using a neodynium-doped yttrium aluminum garnet (Nd:YAG) laser. The hand-held units have a flexible umbilical cable to an accompanying cart that carries the power supply, gas supply, cooling unit, and the controls.
Source record↗
Theoretical and experimental investigations of the thermoelectric properties of Bi{sub 2}S{sub 3}
Electronic and transport properties of Bi{sub 2}S{sub 3} with various dopants are studied using density functional theory and experimental characterizations. First, principle calculations of thermoelectric properties are used to evaluate the thermoelectric potential of the orthorhombic Bi{sub 2}S{sub 3} structure. The computational screening of extrinsic defects is used to select the most favorable n-type dopants. Among all the dopants considered, hafnium and chlorine are identified as prospective dopants, whereas, e.g., germanium is found to be unfavorable. This is confirmed by experiment. Seebeck coefficient (S) and electrical conductivity (σ) measurements are performed at room temperature on pellets obtained by spark plasma sintering. An increase of power factors (S{sup 2}·σ) from around 50 up to 500 μW K{sup −2} m{sup −1} is observed for differently doped compounds. In several series of samples, we observed an optimum of power factor above 500 μW K{sup −2} m{sup −1} at room temperature for a chlorine equivalence of 0.25 mol. % BiCl{sub 3}. The obtained results are plotted on a semilogarithmic log (σ) versus S graph to demonstrate that a very strong linear trend that limits the power factor around 500 μW K{sup −2} m{sup −1} exists. Further improvement of Bi{sub 2}S{sub 3} as thermoelectric material will require finding new doping modes that will break through the observed trend. The results of stability tests demonstrate that properties of optimally doped Bi{sub 2}S{sub 3} are stable.
36 MATERIALS SCIENCE↗
p-type conductivity and damage recovery in implanted GaN annealed by rapid gyrotron microwave annealing
We demonstrate p-type activation of GaN doped by Mg ion implantation, and in situ during metalorganic chemical vapor deposition through sequential short-duration gyrotron microwave heating cycles at temperatures of 1200–1350 °C. GaN is implanted with 1019 cm−3 Mg ions, capped with AlN, and annealed under 3 MPa N2 overpressure in 5 s heating cycles for less than 60 s total using a high-power gyrotron microwave heating source. Through I–V characterization, photoluminescence spectroscopy, and Raman spectroscopy, we study the evolution of electrical properties, optically active point defects, and material strain in response to implantation and annealing. For Mg-implanted samples, increasing annealing temperature is characterized by an increase in the PL substitutional Mg-related peak (UVL) relative to the shallow-donor vacancy-related peak (GL2). Through comparison of implanted and in situ doped samples, it is demonstrated that the origin of compensating VN lies primarily in implantation rather than degradation from the annealing process. Transmission line measurements and diode I–V measurements show a sheet resistance of 1083 kΩ/□ and a hole concentration of 1.23 × 1015 cm−3, respectively, in the Mg-implanted material annealed at 1350 °C. We conclude that temperature-cycled gyrotron annealing at 1350 °C decreases implant-induced compensating point defects and activates Mg to obtain selective p-type conduction.
Meyers, V. (ORCID:0000000176731553)↗
Design of Molecular Solar Cells via Feedback from Soft X-ray Spectroscopy
Spectroscopy with soft X-rays was used to develop new materials and novel designs for solar cells and artificial photosynthesis. In order to go beyond the widely-used trial-and-error approach of gradually improving a particular design, we started from the most general layout of a solar cell (or a photo-electrochemical device) and asked which classes of materials are promising for best performance. For example, the most general design of a solar cell consists of a light absorber, an electron donor, and an electron acceptor. These are characterized by four energy levels, which were measured by a combination of spectroscopic X-ray techniques. Tuning synchrotron radiation to the absorption edges of specific elements provided element- and bond-selectivity. The spectroscopic results were complemented by state-of-the-art calculations of the electronic states. These helped explaining the observed energy levels and the orbitals associated with them. The calculations were extended to a large class of materials (for example thousands of porphyrin dye complexes) in order to survey trends in the energy level structure. A few highlights serve as examples: 1) Organic molecules combining absorber, donor, and acceptor with atomic precision. 2) Exploration of highly p-doped diamond films as inert, transparent electron donors. 3) Surface-sensitive characterization of nanorod arrays used as photoanodes in water splitting. 4) Computational design of molecular complexes for efficient solar cells using two photons.
14 SOLAR ENERGY↗
Characterization of mechano-thermally synthesized Curie temperature-adjusted La{sub 0.8}Sr{sub 0.2}MnO{sub 3} nanoparticles coated with (3-aminopropyl) triethoxysilane
This research aimed to synthesize nanostructured strontium-doped lanthanum manganite, La{sub 0.8}Sr{sub 0.2}MnO{sub 3} (LSMO), with its Curie temperature (T{sub c}) adjusted to the therapeutic range, through a mechanothermal route. In order to investigate the effect of heat treatment temperature and duration on the resulting crystallite size, morphology, magnetic behavior and Curie temperature, the starting powder mixture was milled in a planetary ball mill before being subsequently heat treated at distinct temperatures for different time lengths. The composition, morphology, and magnetic behavior were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and vibrating sample magnetometer (VSM). In addition, magnetic properties were further investigated using an alternating current (AC) susceptometer and thermo-magnetic analyzer. 20 h of milling produced a crystallite size reduction leading to a decrease in the heat treatment temperature of LSMO synthesis to 800 °C. Moreover, SEM analysis has shown the morphology of a strong agglomeration of fine nanoparticles. HRTEM showed clear lattice fringes of high crystallinity. The mean crystallite and particle size of 20-hour milled sample heat treated at 1100 °C for 10 h are relatively 69 and 100 nm, respectively. The VSM data at room temperature, indicated a paramagnetic behavior for samples heat treated at 800 °C. However, by increasing heat treatment temperature to 1100 °C, LSMO indicates a ferromagnetic behavior with well-adjusted Curie temperature of 320 K, suitable for hyperthermia applications. Also, reentrant spin glass (RSG) behavior has been found in heat treated samples. The particles are coated with (3-aminopropyl) triethoxysilane (APTES) for biocompatibility purposes; Fourier transform infrared spectroscopy (FTIR) and thermo-gravimetric analysis (TGA) are used for further confirmation of APTES coating. - Highlights: • La{sub 0.8}Sr{sub 0.2}MnO{sub 3} nanoparticles were synthesized via a mechanothermal route. • We report a significant reduction in the heat treatment temperature. • The Curie temperature was tuned within the therapeutic range. • The particles were coated with (3-aminopropyl) triethoxysilane for biocompatibility purposes.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Nanoporous Architectures for Multifaceted Clean Energy Applications
Recently, there has been immense interest in the design and synthesis of highly porous organic architectures due to their multifaceted potentials for applications that include gas storage, separation, conductivity, and catalysis. The chemical composition, physical, and textural properties are dictated during synthesis. This allows for the production of materials with enhanced properties relevant to their respective applications. With the exception of microcrystalline covalent-organic frameworks (COFs), these polymeric materials are amorphous with considerably high porosity and well-defined cavities, which render them highly attractive, especially in adsorptive gas storage. Such desirable traits are imparted into organic materials through the use of rigid building blocks that direct the growth of polymer networks without the aid of templating agents. During the award period, we focused our efforts on the synthesis and characterization of porous organic polymers constructed through B-N and C-N bond formation and investigated their performance in gas storage (H 2 , CH 4 , CO 2 ) and selective CO 2 binding over CH 4 and N 2 . We also demonstrated that thermolysis of nitrogen rich organic polymers afford highly porous nitrogen-rich porous carbons that show remarkable CO 2 capture and separation properties.
36 MATERIALS SCIENCE↗
Thermoplastic matrix composites - LARC-TPI, polyimidesulfone and their blends
Composites were fabricated from unidirectional unsized AS-4 carbon fiber and two baseline polyimides: benzophenone dianhydride-3,3'-diaminodiphenylsulfone (PISO2) and benzophenone dianhydride-3,3'-diaminobenzophenone (LARC-TPI). In addition, each polymer solution prior to prepregging was doped with various amounts of crystalline LARC-TPI powder to enhance melt flow during press molding. The 2:1, 1:1, and 1:2 ratios of crystalline to amorphous resin, respectively, were studied in the LARC-TPI system and the 1:2 ratio in the PISO2 system. Matrix characterization, prepreg fabrication/characterization and composite fabrication and physical/mechanical properties are described. The latter include three point short beam shear and flexure, dry and wet, as well as fracture toughness properties in selected compositions.
Johnston, Norman J.↗