Search NASA⌕ Search

SEARCH · Search NASA

Results for “smoothing methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Comparative and Cost Analysis of a Novel Predictive Power Ramp Rate Control Method: A Case Study in a PV Power Plant in Puerto Rico

One of the most important aspects that need to be addressed to increase solar energy penetration is the power ramp-rate control. In weak grids such as the one found in Puerto Rico, it is important to smooth power fluctuations caused by the intermittence of passing clouds. In this work, a novel power ramp-rate control strategy is proposed. Additionally, a comparison with some of the most common power ramp-rate control methods is performed using a proposed model and real solar radiation data from the Coto Laurel photovoltaic power plant located in Ponce, Puerto Rico. The proposed model was validated using one-year real data from Coto Laurel. The power ramp-rate control methods were compared in real-time simulations using the OP5700 from Opal-RT Technologies considering power ramp rate fluctuations, power ramp-rate violations, fluctuations in the state-of-charge, among other indicators. Moreover, the proposed power ramp-rate control strategy, called predictive dynamic smoothing was explained and compared. Results indicate that the predictive dynamic smoothing produced a considerably reduced Levelized Cost of Storage compared to other power ramp-rate control methods and provided a higher lifetime expectancy for lithium batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Optimal smoothing length scale for actuator line models of wind turbine blades based on Gaussian body force distribution: Wind energy, actuator line model

The actuator line model (ALM) is a commonly used method to represent lifting surfaces such as wind turbine blades within large-eddy simulations (LES). In the ALM, the lift and drag forces are replaced by an imposed body force that is typically smoothed over several grid points using a Gaussian kernel with some prescribed smoothing width e. To date, the choice of e has most often been based on numerical considerations related to the grid spacing used in LES. However, especially for finely resolved LES with grid spacings on the order of or smaller than the chord length of the blade, the best choice of e is not known. In this work, a theoretical approach is followed to determine the most suitable value of e, based on an analytical solution to the linearized inviscid flow response to a Gaussian force. We find that the optimal smoothing width eopt is on the order of 14%-25% of the chord length of the blade, and the center of force is located at about 13%-26% downstream of the leading edge of the blade for the cases considered. These optimal values do not depend on angle of attack and depend only weakly on the type of lifting surface. It is then shown that an even more realistic velocity field can be induced by a 2-D elliptical Gaussian lift-force kernel. Some results are also provided regarding drag force representation.

17 WIND ENERGY↗
DOE OSTI2022

Metrics for Intercomparison of Remapping Algorithms (MIRA) protocol applied to Earth system models

Abstract. Strongly coupled nonlinear phenomena such as those described by Earth system models (ESMs) are composed of multiple component models with independent mesh topologies and scalable numerical solvers. A common operation in ESMs is to remap or interpolate component solution fields defined on their computational mesh to another mesh with a different combinatorial structure and decomposition, e.g., from the atmosphere to the ocean, during the temporal integration of the coupled system. Several remapping schemes are currently in use or available for ESMs. However, a unified approach to compare the properties of these different schemes has not been attempted previously. We present a rigorous methodology for the evaluation and intercomparison of remapping methods through an independently implemented suite of metrics that measure the ability of a method to adhere to constraints such as grid independence, monotonicity, global conservation, and local extrema or feature preservation. A comprehensive set of numerical evaluations is conducted based on a progression of scalar fields from idealized and smooth to more general climate data with strong discontinuities and strict bounds. We examine four remapping algorithms with distinct design approaches, namely ESMF Regrid (Hill et al., 2004), TempestRemap (Ullrich and Taylor, 2015), generalized moving least squares (GMLS) (Trask and Kuberry, 2020) with post-processing filters, and WLS-ENOR (Li et al., 2020). By repeated iterative application of the high-order remapping methods to the test fields, we verify the accuracy of each scheme in terms of their observed convergence order for smooth data and determine the bounded error propagation using challenging, realistic field data on both uniform and regionally refined mesh cases. In addition to retaining high-order accuracy under idealized conditions, the methods also demonstrate robust remapping performance when dealing with non-smooth data. There is a failure to maintain monotonicity in the traditional L2-minimization approaches used in ESMF and TempestRemap, in contrast to stable recovery through nonlinear filters used in both meshless GMLS and hybrid mesh-based WLS-ENOR schemes. Local feature preservation analysis indicates that high-order methods perform better than low-order dissipative schemes for all test cases. The behavior of these remappers remains consistent when applied on regionally refined meshes, indicating mesh-invariant implementations. The MIRA intercomparison protocol proposed in this paper and the detailed comparison of the four algorithms demonstrate that the new schemes, namely GMLS and WLS-ENOR, are competitive compared to standard conservative minimization methods requiring computation of mesh intersections. The work presented in this paper provides a foundation that can be extended to include complex field definitions, realistic mesh topologies, and spectral element discretizations, thereby allowing for a more complete analysis of production-ready remapping packages.

58 GEOSCIENCES↗
NASA NTRS1989

Analysis of a second-order-accurate finite-volume method for temporally-growing compressible shear layers

A finite-volume method for solving the compressible laminar Navier-Stokes equation in two dimensions is assessed for use in the simulation of transitional flows. The method is second-order-accurate, uses alternating-direction-implicit time integration, and a total-variation-diminishing smoothing operator in the inviscid flux terms. The test problem was a free shear layer with a forced periodicity in x at a specified wavelength and with the parallel mean flow specified as a hyperbolic-tangent profile. A grid refinement investigation verified this method to be second-order-accurate with less than 4 percent error in the growth rate of isolated modes on a 32 by 64 grid. The interaction between modes of similar amplitude was small, less than 1 percent. However, in cases where there was a dominant mode, numerical phase error pumped energy into all other modes. This error results in nonphysical growth rate for modes whose energy content is several orders of magnitude below the dominant mode. In the case when the dominant mode saturates, the pumping action stops and the growth rate of the next largest growing mode regains physical significance.

Atkins, H. L.↗
DOE OSTI2016

Enhanced nearfield acoustic holography for larger distances of reconstructions using fixed parameter Tikhonov regularization

This paper evaluates the performance of various regularization parameter choice methods applied to different approaches of nearfield acoustic holography when a very nearfield measurement is not possible. For a fixed grid resolution, the larger the hologram distance, the larger the error in the naive nearfield acoustic holography reconstructions. These errors can be smoothed out by using an appropriate order of regularization. In conclusion, this study shows that by using a fixed/manual choice of regularization parameter, instead of automated parameter choice methods, reasonably accurate reconstructions can be obtained even when the hologram distance is 16 times larger than the grid resolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Multiscale Universal Interface: A concurrent framework for coupling heterogeneous solvers

Graphical abstract: - Abstract: Concurrently coupled numerical simulations using heterogeneous solvers are powerful tools for modeling multiscale phenomena. However, major modifications to existing codes are often required to enable such simulations, posing significant difficulties in practice. In this paper we present a C++ library, i.e. the Multiscale Universal Interface (MUI), which is capable of facilitating the coupling effort for a wide range of multiscale simulations. The library adopts a header-only form with minimal external dependency and hence can be easily dropped into existing codes. A data sampler concept is introduced, combined with a hybrid dynamic/static typing mechanism, to create an easily customizable framework for solver-independent data interpretation. The library integrates MPI MPMD support and an asynchronous communication protocol to handle inter-solver information exchange irrespective of the solvers' own MPI awareness. Template metaprogramming is heavily employed to simultaneously improve runtime performance and code flexibility. We validated the library by solving three different multiscale problems, which also serve to demonstrate the flexibility of the framework in handling heterogeneous models and solvers. In the first example, a Couette flow was simulated using two concurrently coupled Smoothed Particle Hydrodynamics (SPH) simulations of different spatial resolutions. In the second example, we coupled the deterministic SPH method with the stochastic Dissipative Particle Dynamics (DPD) method to study the effect of surface grafting on the hydrodynamics properties on the surface. In the third example, we consider conjugate heat transfer between a solid domain and a fluid domain by coupling the particle-based energy-conserving DPD (eDPD) method with the Finite Element Method (FEM)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Crystal growth of Bi{sub 2}Te{sub 3} and noble cleaved (0001) surface properties

A high quality Bi{sub 2}Te{sub 3} crystal has been grown by Bridgman method with the use of rotating heat field. The phase purity and bulk structural quality of the crystal have been verified by XRD analysis and rocking curve observation. The atomically smooth Bi{sub 2}Te{sub 3}(0001) surface with an excellent crystallographic quality is formed by cleavage in the air. The chemical and microstructural properties of the surface have been evaluated with RHEED, AFM, STM, SE and XPS. The Bi{sub 2}Te{sub 3}(0001) cleaved surface is formed by atomically smooth terraces with the height of the elemental step of ~1.04±0.1 nm, as estimated by AFM. There is no surface oxidation process detected over a month keeping in the air at normal conditions, as shown by comparative core level photoelectron spectroscopy. - Graphical abstract: A high quality Bi{sub 2}Te{sub 3} crystal has been grown by Bridgman method with the use of rotating heat field and the Bi{sub 2}Te{sub 3}(0001) cleaved surface has been evaluated with RHEED, AFM, STM, SE and XPS. - Highlights: • High-quality Bi{sub 2}Te{sub 3} crystal of 10 mm in diameter and 50 mm long have been grown. • The high-purity cleaved Bi{sub 2}Te{sub 3}(0001) surface has been evaluated by RHEED, AFM, STM and XPS methods. • The Bi{sub 2}Te{sub 3} surface covered by atomically smooth (0001) terraces is chemically stable for a long time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Optimizing stochastic algorithms for hadron correlation function computations in lattice QCD using a localized distillation basis

Distillation is a quark-smearing method for the construction of a broad class of hadron operators useful in lattice QCD computations and defined via a projection operator into a vector space of smooth gauge-covariant fields. A new orthonormal basis for this space is constructed which builds in locality. This basis is useful for the construction of stochastic methods to estimate the correlation functions computed in Monte Carlo calculations relevant for hadronic physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1989

Application of a self-adaptive grid method to complex flows

A directional-split, modular, user-friendly grid point distribution code is applied to several test problems. The code is self-adaptive in the sense that grid point spacing is determined by user-specified constants denoting maximum and minimum grid spacings and constants relating the relative influence of smoothness and orthogonality. Estimates of truncation error, in terms of flow-field gradients and/or geometric features, are used to determine the point distribution. Points are redistributed along grid lines in a specified direction in an elliptic manner over a user-specified subdomain, while orthogonality and smoothness are controlled in a parabolic (marching) manner in the remaining directions. Multidirectional adaption is achieved by sequential application of the method in each coordinate direction. The flow-field solution is redistributed onto the newly distributed grid points after each unidirectional adaption by a simple one-dimensional interpolation scheme. For time-accurate schemes such interpolation is not necessary and time-dependent metrics are carried in the fluid dynamic equations to account for grid movement.

Deiwert, G. S.↗
DOE OSTI2025

3D mesh regularization within an ALE code using a weighted line sweeping method

The Lagrangian formalism is widely used to simulate hydrodynamic responses in complex engineering applications, particularly those involving strong shock waves. However, as the mesh moves with the fluid, it can become highly distorted, requiring a regularization step. This involves constructing a new grid and remapping conservative quantities onto it to restore mesh quality. This work introduces a regularization method for block-structured meshes within a 3D ALE (Arbitrary Lagrangian-Eulerian) code. The proposed approach prevents mesh tangling while preserving the anisotropic features of the initial Lagrangian mesh. This regularization technique incorporates aspect ratio-based weights to control mesh smoothing. Unlike uniform rezoning techniques, this weighted approach maintains proximity to the Lagrangian mesh while improving mesh quality. Here, the method effectively handles concave geometries by mitigating the grid attraction phenomenon, which typically leads to mesh concentration along concave edges. Numerical experiments demonstrate its efficiency in regularizing severely deformed meshes, and its integration within the ALE framework is validated on challenging hydrodynamic test cases, including the triple point problem.

42 ENGINEERING↗
NASA NTRS1987

Forecast of an exceptionally large even-numbered solar cycle

Using the 'dynamo theory' method to predict solar activity, an accurate prediction was made for solar cycle 21 by Schatten et al. (1978). Using the same dynamo technique for solar cycle 22, a value for the smoothed sunspot number of 170 + or - 25 is obtained. This large sunspot number is expected to peak in 1990 + or - 1 year. The F(10.7) radio flux is expected to reach a smoothed value of 210 + or - 25 flux units. Since this value is larger than values obtained with prediction schemes based upon 'statistical' and 'periodicity' methods, it provides a useful test for the current methodology, based upon the strength of the sun's polar field near solar minimum. The predicted degree of solar activity is expected to enhance the density and temperature of the earth's thermosphere to values somewhat larger than those found in solar cycle 21. This will have an impact on the orbital lifetime of low altitude satellites.

Schatten, Kenneth H.↗
DOE OSTI2025

Open Specy 1.0: Automated (Hyper)spectroscopy for Microplastics

Microplastic spectral analysis is one of the most time-consuming processes in studying microplastic pollution, often requiring days per sample. Researchers are transitioning to automated batch and hyperspectral image analysis techniques to enhance efficiency. Open Specy, initially aimed at manual single-spectrum analysis, has now integrated automated methods. This updated version, Open Specy 1.0, introduces several new features, including two algorithms for automated processing (smoothing and particle compression), an extensive library containing over 40,000 open-source Raman and FTIR spectra, and two machine learning classifiers (logistic regression and k medoids) developed from this library. Furthermore, it includes a revamped user interface, an R package, and a benchmark data set for testing future advancements in automated techniques. Researchers evaluated various configurations for hyperspectral smoothing, particle identification, compression, and splitting, to achieve combined recovery rates between 50 and 150% particle counts, identities, and sizes with a coefficient of variation (CV) of less than 40% (the accredited standard). Mean absorbance times the standard deviation provided a consistent particle identification. Hyperspectral smoothing led to a 96% combined recovery rate and reduced variability (CV = 38%) compared to the 86% recovery (CV = 83%) of nonsmoothed controls. Additionally, compressing spectra for particles was significantly faster (>3x) and showed similar accuracy but with reduced variability than processing each pixel individually. Key challenges persist in automating spectral analysis, particularly in refining particle splitting algorithms, and improving identification routines to minimize false positives and negatives. In conclusion, new methods in sample preparation for better stabilization and dispersion of particles could overcome some of these issues.

13 HYDRO ENERGY↗
NASA NTRS1991

Grid convergence for adaptive methods

The ability of adaptive methods to obtain accurate results is examined using two different Euler solvers for a near-sonic flow containing several important flow features. It is shown that the accuracy obtained can be greatly affected by the lack of resolution of smooth portions of the flow caused by adapting only to the more prevalent flow features such as discontinuities. In particular, common methods of adaptation can lead to results in which shocks are well resolved but whose locations are highly inaccurate due to the lack of resolution of the smoother regions. An explanation for this behavior is given and a correction is proposed.

Warren, Gary P.↗
DOE OSTI2018

Compact 3D Copper with Uniform Porous Structure Derived by Electrochemical Dealloying as Dendrite-Free Lithium Metal Anode Current Collector

Here, the development of lithium (Li) metal anodes Li metal batteries faces huge challenges such as uncontrolled Li dendrite growth and large volume change during Li plating/stripping, resulting in severe capacity decay and high safety hazards. A 3D porous copper (Cu) current collector as a host for Li deposition can effectively settle these problems. However, constructing a uniform and compact 3D porous Cu structure is still an enormous challenge. Herein, an electrochemical etching method for Cu–Zinc (Zn) alloy is reported to precisely engrave a 3D Cu structure with uniform, smooth, and compact porous network. Such a continuous structure endows 3D Cu excellent mechanical properties and high electrical conductivity. The uniform and smooth pores with a large internal surface area ensures well dispersed current density for homogeneous Li metal deposition and accommodation. A smooth and stable solid electrolyte interphase is formed and meanwhile Li dendrites and dead Li are effectively suppressed. The Li metal anode conceived 3D Cu current collector can stably cycle for 400 h under an Li plating/stripping capacity of 1 mA h cm –2 and a current density of 1 mA cm –2 . The Li@3D Cu||LiFePO 4 full cells present excellent cycling and rate performances. The electrochemical dealloying is a robust method to construct 3D Cu current collectors for dendrite–free Li metal anodes.

25 ENERGY STORAGE↗
DOE OSTI2018

Eigenvector Continuation with Subspace Learning

A common challenge faced in quantum physics is finding the extremal eigenvalues and eigenvectors of a Hamiltonian matrix in a vector space so large that linear algebra operations on general vectors are not possible. There are numerous efficient methods developed for this task, but they generally fail when some control parameter in the Hamiltonian matrix exceeds some threshold value. In this Letter we present a new technique called eigenvector continuation that can extend the reach of these methods. The key insight is that while an eigenvector resides in a linear space with enormous dimensions, the eigenvector trajectory generated by smooth changes of the Hamiltonian matrix is well approximated by a very low-dimensional manifold. We prove this statement using analytic function theory and propose an algorithm to solve for the extremal eigenvectors. We benchmark the method using several examples from quantum many-body theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2018

NASA ACC High Energy Dynamic Impact Methodology and Outcomes

For High Energy Dynamic Impact (HEDI) events, testing to evaluate the structural response of primary aircraft structure for design and certification is both expensive and time consuming. This paper discusses current work seeking to assess, develop, and validate appropriate analytical models that accurately predict physical response, damage, and failure modes for large scale composite structures in HEDI events. Four state-of-the-art Progressive Damage Analysis (PDA) methods were employed for this phased project: LS-DYNA MAT162, LS-DYNA MAT261, Smoothed Particle Galerkin (SPG), and EMU Peridynamics. Multiple material systems were considered, namely T700/5208 textile-infusion triaxial braid, T800/AMD-825 textile-infusion triaxial braid, IM7/8552 uni-directional tape, and SPG 196-PW/8552 plain-weave fabric. Extensive ballistic impact testing was performed to support this activity and measured results were compared to predictive models for assessment using panel delamination, panel displacement, force at the load cells, and threshold velocity as measures. Ultimately, the work under this activity provided significant progress in advancing the state-of-the-art in the use of PDA for HEDI events. Each material model had favorable performance comparing to test in some parameters and needed improvement in others. With the lessons learned from this activity, significant progress was made in the ability to predict panel behavior for a more general case beyond the flat panel in a ballistic impact event. Subsequent Phase II of the NASA ACC HEDI effort will continue to build on the coupon testing, flat panel ballistic impact testing, and analysis performed to-date with application of the PDA methods for intended material selections to test articles with greater complexity of configuration, curvature, and scale. It is not the intention of this paper to present a full set of data, but rather to give an overview of the NASA HEDI effort and show a small representative subset of the test and analysis results.

Hunziker, Kenneth J.↗
NASA NTRSDate not supplied

Wall-Modeled LES of a Swept Wing with Leading-Edge Ice Using LAVA Curvilinear, Unstructured, and Cartesian Solvers

Wall-modeled large-eddy simulation (LES) of a swept wing with leading-edge ice build up is performed using three mesh paradigms and associated flow solvers and compared to experimental results. The study focuses on an 8.9% scale model of the CRM65 swept wing featuring both high-fidelity and smooth leading-edge ice shapes. The assessment is conducted using the Launch, Ascent, and Vehicle Aerodynamics (LAVA) framework using the three actively supported meshing paradigms in LAVA: structured curvilinear overset, unstructured, andCartesian. For the iced configurations, these paradigms use hybrid body-fitted/source-term immersed-boundary, body-fitted, and ghost-cell immersed-boundary strategies, respectively.The unstructured and Cartesian mesh paradigms are particularly attractive for complex ice shapes as they avoid the manual mesh generation effort associated with the curvilinear approach. For the high-fidelity ice shape, good agreement with the experiment can be obtained with all three strategies; however, the curvilinear method is particularly sensitive to the source-term immersed-boundary timescale and span wise mesh resolution, and the Cartesian implementation is sensitive to the choice of numerical flux. For the smooth ice, larger discrepancies are observed across all methods. However, a mesh refinement study guided by flow visualizations leads to an improved comparison with the experiment that is particularly pronounced for the unstructured mesh paradigm.

TTT↗