Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectral error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

On the application of pseudo-spectral FFT technique to non-periodic problems

The reduction-to-periodicity method using the pseudo-spectral Fast Fourier Transform (FFT) technique is applied to the solution of nonperiodic problems including the two-dimensional Navier-Stokes equations. The accuracy of the method is demonstrated by calculating derivatives of given functions, one- and two-dimensional convective-diffusive problems, and by comparing the relative errors due to the FFT method with seocnd order Finite Difference Methods (FDM). Finally, the two-dimensional Navier-Stokes equations are solved by a fractional step procedure using both the FFT and the FDM methods for the driven cavity flow and the backward facing step problems. Comparisons of these solutions provide a realistic assessment of the FFT method indicating its range of applicability.

Biringen, S.↗
NASA NTRS1993

The Feasibility of Tropospheric and Total Ozone Determination Using a Fabry-perot Interferometer as a Satellite-based Nadir-viewing Atmospheric Sensor

Monitoring of the global distribution of tropospheric ozone (O3) is desirable for enhanced scientific understanding as well as to potentially lessen the ill-health impacts associated with exposure to elevated concentrations in the lower atmosphere. Such a capability can be achieved using a satellite-based device making high spectral resolution measurements with high signal-to-noise ratios; this would enable observation in the pressure-broadened wings of strong O3 lines while minimizing the impact of undesirable signal contributions associated with, for example, the terrestrial surface, interfering species, and clouds. The Fabry-Perot Interferometer (FPI) provides high spectral resolution and high throughput capabilities that are essential for this measurement task. Through proper selection of channel spectral regions, the FPI optimized for tropospheric O3 measurements can simultaneously observe a stratospheric component and thus the total O3 column abundance. Decreasing stratospheric O3 concentrations may lead to an increase in biologically harmful solar ultraviolet radiation reaching the earth's surface, which is detrimental to health. In this research, a conceptual instrument design to achieve the desired measurement has been formulated. This involves a double-etalon fixed-gap series configuration FPI along with an ultra-narrow bandpass filter to achieve single-order operation with an overall spectral resolution of approximately .068 cm(exp -1). A spectral region of about 1 cm(exp -1) wide centered at 1054.73 cm(exp -1) within the strong 9.6 micron ozone infrared band is sampled with 24 spectral channels. Other design characteristics include operation from a nadir-viewing satellite configuration utilizing a 9 inch (diameter) telescope and achieving horizontal spatial resolution with a 50 km nadir footprint. A retrieval technique has been implemented and is demonstrated for a tropical atmosphere possessing enhanced tropospheric ozone amounts. An error analysis assessing the impact on retrieved O3 amounts of the most significant uncertainties associated with this particular measurement has been performed for several different types of atmospheres. Results show the proposed instrumentation to enable a good measurement of absolute ozone amounts and an even better determination of relative changes, with a range of accuracy to within 7.55 to 20.6 percent for integrated tropospheric amounts (and 1.99 to 4.02 percent for total O3 column abundance) and a corresponding range in precision to within 7.73 to 10.4 percent (and 3.30 to 3.95 percent for total O3 column abundance), for the atmospheric conditions considered.

Larar, Allen Maurice↗
NASA NTRS2000

Determination of Surface and Atmospheric Parameters from AIRS/AMSU/HSB Data

AIRS (Atmospheric Infra Red Sounder) is the first of a series of next generation high spectral resolution infrared sounders which will fly on satellite missions in the next decade. AIRS is a 2368 channel grating spectrometer, with spectral resolving power of roughly upsilon / DELTA upsilon) = 1200, which will fly on the Earth Observing System (EOS) Aqua platform in December 2000 accompanied by Advanced Micowave Sounding Unit (AMSU) A and High Spatial Bandwidth (HSB), which is similar to AMSU B. New methodology has been developed by the AIRS Science Team to analyze AIRS/AMSU/HSB data in the presence of multilayer broken clouds. The baseline AIRS/AMSU products include surface skin temperature, surface spectral emissivity, atmospheric temperature-moisture-ozone profiles and cloud heights and amounts. Research products include CO and CH4 profiles, total CO2 burden, and OLR. This methodology will be briefly described and results will be shown of AIRS Science Team simulations, based on one day of simulated global data. RMS errors of atmospheric temperature profiles are expected to be better than 1 K for 1 km layer mean temperatures in up to 80% multilayer fractional cloud cover and RMS errors for moisture profiles are better than 15% for 2 km layers throughout the troposphere.

Susskind, J.↗
NASA NTRS2003

Validation of ADAR System 5500 Digital Imagery: Delivery Task Order #1, Task Request #857 - Brookings, SD

This work was performed under NASA's Verification and Validation Program as an independent check of data supplied by Positive Systems, Inc. through the Earth Science Enterprise's Scientific Data Purchase (SDP) Program. This document serves as the basis for reporting results associated with validation of multispectral imagery according to the specifications of contract NAS 13-98049. The validation was performed under the Positive Systems Imaging System Validation Work Instruction CRSP-WI-28: Spectral registration, spatial resolution, endlaps, sidelaps, and image quality were evaluated. The validation was proceded by Shipment Verification, as described in the Work Instruction CRSP-WI-22: Every image was passed through an automatic ingest verification and thumbnail review process to identify omissions, problems with media integrity, and gross errors in data quality. Validation of metadata files is not within the scope of this report, but it was performed separately.

Blonski, Slawomir↗
NASA NTRS2019

The LUVOIR Extreme Coronagraph for Living Planetary Systems (ECLIPS) II. Performance Evaluation, Aberration Sensitivity Analysis and Exoplanet Detection Simulations

Future space missions such as the Large UV-Optical-Infrared Surveyor (LUVOIR) and the Habitable Exoplanet Observatory (HabEx) require coronagraphs with active wavefront control to suppress starlight to discover and characterize habitable exoplanets. The Extreme Coronagraph for Living Planetary Systems (ECLIPS) is the coronagraph instrument on the LUVOIR Surveyor mission concept, an 8–15m segmented telescope. ECLIPS is split into three channels: UV (200 to 400 nm), optical (400 nm to 850 nm), and NIR (850 nm to 2.0 microns), with each channel equipped with two deformable mirrors for wavefront control, a suite of coronagraph masks, a low-order/out-of-band wavefront sensor, and separate science imagers and spectrographs. The Apodized Pupil Lyot Coronagraph (APLC) and the Vector Vortex Coronagraph (VVC) are the baselined mask technologies for ECLIPS to enable the required 10 -10 contrast for observations in the habitable zones of nearby stars. Their performance depends on active wavefront sensing and control, as well as metrology subsystems to compensate for aberrations induced by segment errors (piston and tip/tilt, among others), secondary mirror misalignment, and global low-order wavefront errors. Here we present the latest results of the simulation of these effects for the two technologies and discuss the achieved contrast for exoplanet detection and characterization after closed-loop wavefront estimation and control algorithms have been applied. Finally, we show simulated observations using high-fidelity spatial and spectral input models of complete planetary systems generated with the Haystacks code framework.

Roser Juanola-Parramon↗
NASA NTRS1985

Vector magnetic field observations with the Haleakala polarimeter

Several enhancements were recently made to the Haleakala polarimeter. Linear array detectors provide simultaneous resolution over a 3-A wavelength range, with spectral resolution of 40 mA. Optical fibers are now used to carry the intensity-modulated light from the rotating quarter-wave plate polarimeter to the echelle spectrometer, permitting its removal from the spar to a more stable environment. These changes, together with improved quarter-wave plates, reduced systematic errors to a few parts in 10,000 for routine observations. Examples of Stokes profiles and derived magnetic field maps are presented.

Mickey, D. L.↗
NASA NTRS1990

BATSE software for the analysis of the gamma ray burst spatial distribution

The Burst and Transient Source Experiment (BATSE) on the Gamma Ray Observatory (GRO) is designed to study astronomical gamma ray sources and to provide better positional, spectral, and time resolution about these objects than has previously been possible from one experiment. The procedure to be used in the analysis of the gamma ray burst spatial distribution is presented. Data is input from BATSE via the Gamma Ray Burst Catalog (listing individual burst positions, flux values, and associated errors) and the Sky Sensitivity Map (which summarizes observational selection effects in table format). A FORTRAN program generates Monte Carlo burst catalogs, which are models to be compared to the actual distribution. The Monte Carlo models are then filtered through the Sky Sensitivity Map so that they suffer from the same selection effects as the actual catalog data. Additionally, each burst position is converted into a probability distribution to mimic BATSE positional sensitivity. The Burst Catalog, Monte Carlo burst catalog, and Sky Sensitivity Map are then passed onto an IDL program that compares the catalogs for statistical significance. The Sky Sensitivity Map is used to estimate how often each sky area is observed above the minimum flux level in question. Each burst found in this sky area is then weighted according to the frequency with which this sky area is observed. The catalogs are then compared via tests of homogeneity (based on their radial distributions) and isotropy (based upon their angular distributions). The results of the statistical comparisons along with graphs and charts of the summaries, are output from the IDL program for study.

Hakkila, Jon↗
NASA NTRS1993

An optimized finite-difference scheme for wave propagation problems

Two fully-discrete finite-difference schemes for wave propagation problems are presented, a maximum-order scheme and an optimized (or spectral-like) scheme. Both combine a seven-point spatial operator and an explicit six-stage time-march method. The maximum-order operator is fifth-order in space and is sixth-order in time for a linear problem with periodic boundary conditions. The phase and amplitude errors of the schemes obtained using Fourier analysis are given and compared with a second-order and a fourth-order method. Numerical experiments are presented which demonstrate the usefulness of the schemes for a range of problems. For some problems, the optimized scheme leads to a reduction in global error compared to the maximum-order scheme with no additional computational expense.

Zingg, D. W.↗
NASA NTRS1999

Secondary Forest Age and Tropical Forest Biomass Estimation Using TM

The age of secondary forests in the Amazon will become more critical with respect to the estimation of biomass and carbon budgets as tropical forest conversion continues. Multitemporal Thematic Mapper data were used to develop land cover histories for a 33,000 Square kM area near Ariquemes, Rondonia over a 7 year period from 1989-1995. The age of the secondary forest, a surrogate for the amount of biomass (or carbon) stored above-ground, was found to be unimportant in terms of biomass budget error rates in a forested TM scene which had undergone a 20% conversion to nonforest/agricultural cover types. In such a situation, the 80% of the scene still covered by primary forest accounted for over 98% of the scene biomass. The difference between secondary forest biomass estimates developed with and without age information were inconsequential relative to the estimate of biomass for the entire scene. However, in futuristic scenarios where all of the primary forest has been converted to agriculture and secondary forest (55% and 42% respectively), the ability to age secondary forest becomes critical. Depending on biomass accumulation rate assumptions, scene biomass budget errors on the order of -10% to +30% are likely if the age of the secondary forests are not taken into account. Single-date TM imagery cannot be used to accurately age secondary forests into single-year classes. A neural network utilizing TM band 2 and three TM spectral-texture measures (bands 3 and 5) predicted secondary forest age over a range of 0-7 years with an RMSE of 1.59 years and an R(Squared) (sub actual vs predicted) = 0.37. A proposal is made, based on a literature review, to use satellite imagery to identify general secondary forest age groups which, within group, exhibit relatively constant biomass accumulation rates.

Nelson, R. F.↗
NASA NTRS1997

Spectral Analysis of Vector Magnetic Field Profiles

We investigate the power spectra and cross spectra derived from the three components of the vector magnetic field measured on a straight horizontal path above a statistically stationary source. All of these spectra, which can be estimated from the recorded time series, are related to a single two-dimensional power spectral density via integrals that run in the across-track direction in the wavenumber domain. Thus the measured spectra must obey a number of strong constraints: for example, the sum of the two power spectral densities of the two horizontal field components equals the power spectral density of the vertical component at every wavenumber and the phase spectrum between the vertical and along-track components is always pi/2. These constraints provide powerful checks on the quality of the measured data; if they are violated, measurement or environmental noise should be suspected. The noise due to errors of orientation has a clear characteristic; both the power and phase spectra of the components differ from those of crustal signals, which makes orientation noise easy to detect and to quantify. The spectra of the crustal signals can be inverted to obtain information about the cross-track structure of the field. We illustrate these ideas using a high-altitude Project Magnet profile flown in the southeastern Pacific Ocean.

Parker, Robert L.↗
NASA NTRS2000

Determination of Surface and Atmospheric Parameters from AIRS/AMSU/HSB Data

AIRS (Atmospheric Infra Red Sounder) is the first of a series of next generation high spectral resolution infrared sounders which will fly on satellite missions in the next decade. AIRS is a 2368 channel grating spectrometer, with spectral resolving power of roughly upsilon /Delta(upsilon) = 1200, which will fly on the EOS Aqua platform in December 2000 accompanied by AMSU A and HSB, which is similar to AMSU B. New methodology has been developed by the AIRS Science Team to analyze AIRS/AMSU/HSB data in the presence of multilayer broken clouds. The baseline AIRS/AMSU products include surface skin temperature, surface spectral emissivity, atmospheric temperature-moisture-ozone profiles and cloud heights and amounts. Research products include CO and CH4 profiles, total CO2 burden, and OLR. This methodology will be briefly described and results will be shown of AIRS Science Team simulations, based on one day of simulated global data.. RMS errors of atmospheric temperature profiles are expected to be better than 1 K for 1 km layer mean temperatures in up to 80% multilayer fractional cloud cover and RMS errors for moisture profiles are better than 15% for 2 km layers throughout the troposphere.

Susskind, Joel↗
NASA NTRS2022

Modeling and Performance Analysis of the LUVOIR Coronagraph Instrument

Future space missions such as the Large UV/Optical/Infrared Surveyor (LUVOIR) and the Habitable Exoplanet Observatory, when equipped with coronagraphs with active wavefront control to suppress starlight, will allow the discovery and characterization of habitable exoplanets. The Extreme Coronagraph for Living Planetary Systems (ECLIPS) is the coronagraph instrument on the LUVOIR Surveyor mission concept, an 8- to 15-m segmented telescope. ECLIPS is split into three channels, namely, UV (200 to 400 nm), optical (400 to 850 nm), and near IR (850 nm to 2 μm), with each channel equipped with two deformable mirrors for wavefront control, a suite of coronagraph masks, a low-order/out-of-band wavefront sensor, and separate science imagers and spectrographs. The apodized pupil Lyot coronagraph and the vector vortex coronagraph are the baselined mask technologies for ECLIPS to enable the required 10−10 contrast for observations in the habitable zones of nearby stars for LUVOIR-A (15-m telescope) and LUVOIR-B (8-m telescope), respectively. Their performance depends on active wavefront sensing and control, as well as metrology subsystems to compensate for aberrations induced by segment errors (e.g., piston and tip/tilt), secondary mirror misalignment, and global low-order wavefront errors. Here, we present the latest results of the simulation of these effects for the LUVOIR coronagraph instrument and discuss the achieved contrast for exoplanet detection and characterization after closed-loop wavefront estimation and control algorithms have been applied. Finally, we show simulated observations using high-fidelity spatial and spectral input models of complete planetary systems generated with the Haystacks code framework.

Roser Juanola-Parramon↗
NASA NTRS1979

The determination of atmospheric trace gases using the correlation interferometer technique

The theoretical feasibility inherent in the correlation interferometry technique is demonstrated. High signal to noise and increased information content in a given partial interferogram are attractive features of the technique. The separation of interfering gas species is overcome by a precise measurement program for spectral line parameters of methane and other species. There are optical, mechanical, and electronic difficulties with the interferometry hardware design. Flight data from Cessna 402 over southeastern Virginia during April 1978 yielded amplitude fluctuations that are explainable only as internal nonlinearities. Misalignment of the AGC/interferometer optical axis also contributed to a large error source in the flight data. It is concluded that no useful data on gas burdens was obtained from these flights.

Kindle, E. C.↗
NASA NTRS1988

The red envelope and the age of the universe

The photometric evolution of old stellar populations is slow in the optical/IR. Consequently, observational error is a strongly limiting factor in the accuracy possible for determining galaxy ages or estimating q0 at high redshifts from indices such as the 4000-A break. Existing observations of the red envelope at z above about 0.3 are consistent with a wide range of evolutionary histories. The middle-UV spectral region (rest wavelengths = 2000-3300 A) appears to promise less ambiguous results.

O'Connell, Robert W.↗
NASA NTRS1990

A satellite mobile communication system based on Band-Limited Quasi-Synchronous Code Division Multiple Access (BLQS-CDMA)

Discussed here is a new approach to code division multiple access applied to a mobile system for voice (and data) services based on Band Limited Quasi Synchronous Code Division Multiple Access (BLQS-CDMA). The system requires users to be chip synchronized to reduce the contribution of self-interference and to make use of voice activation in order to increase the satellite power efficiency. In order to achieve spectral efficiency, Nyquist chip pulse shaping is used with no detection performance impairment. The synchronization problems are solved in the forward link by distributing a master code, whereas carrier forced activation and closed loop control techniques have been adopted in the return link. System performance sensitivity to nonlinear amplification and timing/frequency synchronization errors are analyzed.

Degaudenzi, R.↗
NASA NTRS1996

A New Class of Finite Difference Schemes

Fluid flows in the transitional and turbulent regimes possess a wide range of length and time scales. The numerical computation of these flows therefore requires numerical methods that can accurately represent the entire, or at least a significant portion, of this range of scales. The inaccurate representation of small scales is inherent to non-spectral schemes. This can be detrimental to computations where the energy in the small scales is comparable to that in the larger scales, e.g. large-eddy simulations of high Reynolds number turbulence. The inaccurate numerical representation of the small scales in these large-eddy simulations can result in the numerical error overwhelming the contribution of the subgrid-scale model.

Mahesh, K.↗
NASA NTRS2003

Sensitivity Studies for Space-based Measurement of Atmospheric Total Column Carbon Dioxide Using Reflected Sunlight

A series of sensitivity studies is carried out to explore the feasibility of space-based global carbon dioxide (CO2) measurements for global and regional carbon cycle studies. The detection method uses absorption of reflected sunlight in the CO2 vibration-rotation band at 1.58 microns. The sensitivities of the detected radiances are calculated using the line-by-line model (LBLRTM), implemented with the DISORT (Discrete Ordinates Radiative Transfer) model to include atmospheric scattering in this band. The results indicate that (a) the small (approx.1%) changes in CO2 near the Earth's surface are detectable in this CO2 band provided adequate sensor signal-to-noise ratio and spectral resolution are achievable; (b) the radiance signal or sensitivity to CO2 change near the surface is not significantly diminished even in the presence of aerosols and/or thin cirrus clouds in the atmosphere; (c) the modification of sunlight path length by scattering of aerosols and cirrus clouds could lead to large systematic errors in the retrieval; therefore, ancillary aerosol/cirrus cloud data are important to reduce retrieval errors; (d) CO2 retrieval requires good knowledge of the atmospheric temperature profile, e.g. approximately 1K RMS error in layer temperature; (e) the atmospheric path length, over which the CO2 absorption occurs, must be known in order to correctly interpret horizontal gradients of CO2 from the total column CO2 measurement; thus an additional sensor for surface pressure measurement needs to be attached for a complete measurement package.

Mao, Jianping↗
NASA NTRS2014

High Spectral Resolution Lidar and MPLNET Micro Pulse Lidar Aerosol Optical Property Retrieval Intercomparison During the 2012 7-SEAS Field Campaign at Singapore

From August 2012 to February 2013 a High Resolution Spectral Lidar (HSRL; 532 nm) was deployed at that National University of Singapore near a NASA Micro Pulse Lidar NETwork (MPLNET; 527 nm) site. A primary objective of the MPLNET lidar project is the production and dissemination of reliable Level 1 measurements and Level 2 retrieval products. This paper characterizes and quantifies error in Level 2 aerosol optical property retrievals conducted through inversion techniques that derive backscattering and extinction coefficients from MPLNET elastic single-wavelength datasets. MPLNET Level 2 retrievals for aerosol optical depth and extinction/backscatter coefficient profiles are compared with corresponding HSRL datasets, for which the instrument collects direct measurements of each using a unique optical configuration that segregates aerosol and cloud backscattered signal from molecular signal. The intercomparison is performed, and error matrices reported, for lower (0-5km) and the upper (>5km) troposphere, respectively, to distinguish uncertainties observed within and above the MPLNET instrument optical overlap regime.

MPL↗