Small-orifice Tubes for Minimizing Dilution in Exhaust-gas Samples
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
During the first year of NASA's Mars 2020 mission, Perseverance rover has investigated the dark crater floor unit of Jezero crater and four samples of this unit have been collected. The focus of this paper is to assess the potential of these samples to calibrate the crater-based Martian chronology. We first review the previous estimation of crater-based model age of this unit. Then, we investigate the impact crater density distribution across the floor unit. It reveals that the crater density is heterogeneous from areas which have been exposed to the bombardment during the last 3 Ga to areas very recently exposed to bombardment. It suggests a complex history of exposure to impact cratering. We also display evidence of several remnants of deposits on the top of the dark floor unit across Jezero below which the dark floor unit may have been buried. We propose the following scenario of burying/exhumation: the dark floor unit would have been initially buried below a unit that was a few tens of meters thick. This unit then gradually eroded away due to Aeolian processes from the northeast to the west, resulting in uneven exposure to impact bombardment over 3 Ga. A cratering model reproducing this scenario confirms the feasibility of this hypothesis. Due to the complexity of its exposure history, the Jezero dark crater floor unit will require additional detailed analysis to understand how the Mars 2020 mission samples of the crater floor can be used to inform the Martian cratering chronology.
An experimental investigation into the growth of polyurea films by molecular layer deposition was performed by examining trends in the growth rate, crystallinity, and orientation of chains as a function of backbone flexibility. Growth curves obtained for films containing backbones of aliphatic and phenyl groups indicate that an increase in backbone flexibility leads to a reduction in growth rate from 4 to 1 Å/cycle. Crystallinity measurements collected using grazing incidence X-ray diffraction and Fourier transform infrared spectroscopy suggest that some chains form paracrystalline, out-of-plane stacks of polymer segments with packing distances ranging from 4.4 to 3.7 Å depending on the monomer size. Diffraction intensity is largely a function of the homogeneity of the backbone. Near-edge X-ray absorption fine structure measurements for thin and thick samples show an average chain orientation of ~25° relative to the substrate across all samples, suggesting that changes in growth rate are not caused by differences in chain angle but instead may be caused by differences in the frequency of chain terminations. In conclusion, these results suggest a model of molecular layer deposition-based chain growth in which films consist of a mixture of upward growing chains and horizontally aligned layers of paracrystalline polymer segments.
We detect and study the properties of faint radio active galactic nuclei (AGNs) in luminous red galaxies (LRGs). The LRG sample comprises 760,000 objects from a catalog of LRG photometric redshifts constructed from the Sloan Digital Sky Survey (SDSS) imaging data, and 65,000 LRGs from the SDSS spectroscopic sample. These galaxies have typical 1.4 GHz flux densities in the 10s-100s of {mu}Jy, with the contribution from a low-luminosity AGN dominating any contribution from star formation. To probe the radio properties of such faint objects, we employ a stacking technique whereby FIRST survey image cutouts at each optical LRG position are sorted by the parameter of interest and median-combined within bins. We find that median radio luminosity scales with optical luminosity (L {sub opt}) as L {sub 1.4GHz} {proportional_to} L {sup {beta}} {sub opt}, where {beta} depends on the redshift being probed. Above z {approx_equal} 0.4, {beta} appears to decrease from {beta} {approx_equal} 1 at z = 0.4 to {beta} {approx_equal} 0 at z = 0.7, a result which could be indicative of AGN cosmic downsizing. We also find that the overall LRG population, which is dominated by low-luminosity AGNs, experiences significant cosmic evolution between z = 0.2 and z = 0.7. A simultaneous fit to untangle the redshift and luminosity dependences yields redshift evolution of the form L {sub 1.4GHz} {proportional_to} (1 + z){sup 3.15{+-}}{sup 0.07}, implying a considerable increase in total AGN heating for these massive ellipticals with redshift. By matching against the FIRST catalog, we investigate the incidence and properties of LRGs associated with double-lobed (FR I/II) radio galaxies.
Diffusion barrier stacks for the encapsulation of organic electronics made from inorganic nanolaminates of Al{sub 2}O{sub 3} and TiO{sub 2} with aluminum alkoxide interlayers have been deposited by atomic layer deposition (ALD) and molecular layer deposition (MLD). As a part of the MLD process development, the deposition of aluminum alkoxide with low a density of about 1.7 g/cm{sup 3} was verified. The ALD/MLD diffusion barrier stack is meant to be deposited either on a polymer film, creating a flexible barrier substrate, or on top of a device on glass, creating a thin-film encapsulation. In order to measure the water vapor transmission rate (WVTR) through the barrier, the device is replaced by a calcium layer acting as a water sensor in an electrical calcium test. For the barrier stack applied as thin-film encapsulation on glass substrates, high resolution scanning electron microscopy investigations indicate that the inorganic nanolaminates without MLD interlayers are brittle as they crack easily upon the stress induced by the corroding calcium below. The introduction of up to three MLD interlayers of 12 nm each into the 48 nm barrier film laminate successfully mitigates stress issues and prevents the barrier from cracking. Using the three MLD interlayer configurations on glass, WVTRs of as low as 10{sup −5} g/m{sup 2}/d are measured at 38 °C and 32% relative humidity. On polymer barrier substrates, the calcium is evaporated onto the barrier stack and encapsulated with a cavity glass. In this configuration, the corroding calcium has space for expansion and gas release without affecting the underlying barrier film. In consequence, a WVTR of about 3 × 10{sup −3} g/m{sup 2}/d is measured for all samples independently of the number of MLD interlayers. In conclusion, a stabilization and preservation of the ALD barrier film against mechanical stress is achieved by the introduction of MLD interlayers into the inorganic nanolaminate.
Purpose: To use confocal microscopy to distinguish cells in different phases of the cell cycle before and after treatment with pegylated gold nanoshells (PEG-AuNSs). Methods: Transfected fibrosarcoma cells (HT1080-EYFP-53BP1-FUCCI) were cultured in T-25 flasks and seeded in glass bottom dishes. These cells express the fluorescent probe AmCyan during the G2/S phases of the cell cycle, mCherry during the G1 phase, and EYFP tagged to the DNA repair protein 53BP1. After allowing cells 4 h to adhere to dishes, PEG-AuNS (Nanospectra Biosciences, Houston, TX) at a concentration of 0.15 OD were administered. At time points of 8, 16 and 24 h following treatment, the PEG-AuNS-treated and control samples were washed with phosphate buffered saline (PBS) and fixed using 4% paraformaldehyde in PBS. Samples were imaged with an Olympus FV1200 confocal microscope using 473, 543, and 641 nm excitation lasers. We used band-pass filters to select AmCyan and mCherry fluorescence. Reflection from the 641 nm laser was used to detect PEG-AuNSs. Z-stack images were analyzed to assess cell cycle distribution through fluorescent probe expression. Live cells were imaged after PEG-AuNS treatment using a confocal microscope with a stage top CO2 incubator. Results: We were able to obtain high-resolution images of cells with internalized AuNSs. We were also able to distinguish cells in different phases of the cell cycle. Conclusion: This work demonstrates a new assay to investigate the effect of AuNSs on the cell cycle phase in live cells. Future work will employ confocal microscopy and flow cytometry to focus on effects of AuNS treatment on cell cycle distribution. This research was supported by the Sister Institution Network Fund and the Center for Radiation Oncology Research at The University of Texas MD Anderson Cancer Center and Cancer Prevention and Research Institute of Texas. Gabriel Sawakuchi has research support from Elekta Inc.
We present properties of individual and composite rest-UV spectra of continuum- and narrowband-selected star-forming galaxies (SFGs) at a redshift of 2 < z < 3.5 discovered by the MUSYC collaboration in the Extended Chandra Deep Field-South. Among our sample of 81 UV-bright SFGs, 59 have R < 25.5, of which 32 have rest-frame equivalent widths of W{sub Ly{alpha}} > 20 A, the canonical limit to be classified as an Ly{alpha}-emitting galaxy. We divide our data set into subsamples based on properties that we are able to measure for each individual galaxy: Ly{alpha} equivalent width, rest-frame UV colors, and redshift. Among our subsample of galaxies with R < 25.5, those with rest frame W{sub Ly{alpha}} > 20 A have bluer UV continua, weaker low-ionization interstellar absorption lines, weaker C IV absorption, and stronger Si II* nebular emission than those with W{sub Ly{alpha}} < 20 A. We measure a velocity offset of {Delta}v {approx} 600 km s{sup -1} between Ly{alpha} emission and low-ionization absorption, which does not vary substantially among any of our subsamples. We find that the interstellar component, as opposed to the stellar component, dominates the high-ionization absorption line profiles. We find that the low- and high-ionization Si ionization states have similar kinematic properties, yet the low-ionization absorption is correlated with Ly{alpha} emission and the high-ionization absorption is not. These trends are consistent with outflowing neutral gas being in the form of neutral clouds embedded in ionized gas as previously suggested by Steidel et al. Moreover, our galaxies with bluer UV colors have stronger Ly{alpha} emission, weaker low-ionization absorption, and more prominent nebular emission line profiles. From a redshift of 2.7 < z < 3.5 to 2.0 < z < 2.7, our subsample of galaxies with W{sub Ly{alpha}} < 20 Angstrom-Sign shows no significant evolution in their physical properties or the nature of their outflows. Among our data set, UV-bright galaxies with W{sub Ly{alpha}} > 20 A exhibit weaker Ly{alpha} emission at lower redshifts, although we caution that this could be caused by spectroscopic confirmation of low Ly{alpha} equivalent width galaxies being harder at z {approx} 3 than z {approx} 2.
The effect of Sb inclusion in CdSeTe thin films was examined. CdSeTe alloys were grown by co-evaporation, either on 5 nm thick electron-beam evaporated Sb layers (Sb/CdSeTe) or coated with Sb post-deposition (CdSeTe/Sb). Sb inclusion improved CdSeTe grain structure, a critical factor for device performance, with average grain size increasing from 0.6 to 1.5 μm. All samples crystallized on annealing to the cubic structure, with a change in film orientation from (111) to random or (220). The presence of Sb in CdSeTe/Sb or Sb/CdSeTe samples, however, had a limited effect on the carrier concentration compared to Sb-free samples. Time resolved photoluminescence showed Sb inclusion increased decay lifetimes, with τ1 = 0.8 ns for and τ2 = 6.9 ns for the Sb/CdSeTe sample.
We identify 85 variable galaxies in the GOODS North and South fields using five epochs of Hubble Space Telescope Advance Camera for Survey V-band (F606W) images spanning 6 months. The variables are identified through significant flux changes in the galaxy's nucleus and represent {approx}2% of the survey galaxies. With the aim of studying the active galaxy population in the GOODS fields, we compare the variability-selected sample with X-ray and mid-IR active galactic nucleus (AGN) candidates. Forty-nine percent of the variables are associated with X-ray sources identified in the 2Ms Chandra surveys. Twenty-four percent of X-ray sources likely to be AGNs are optical variables and this percentage increases with decreasing hardness ratio of the X-ray emission. Stacking of the non-X-ray-detected variables reveals marginally significant soft X-ray emission. Forty-eight percent of mid-IR power-law sources are optical variables, all but one of which is also X-ray detected. Thus, about half of the optical variables are associated with either X-ray or mid-IR power-law emission. The slope of the power-law fit through the Spitzer IRAC bands indicates that two-thirds of the variables have BLAGN-like spectral energy distributions. Among those galaxies spectroscopically identified as AGNs, we observe variability in 74% of broad-line AGNs and 15% of NLAGNs. The variables are found in galaxies extending to z{approx} 3.6. We compare the variable galaxy colors and magnitudes to the X-ray and mid-IR sample and find that the non-X-ray-detected variable hosts extend to bluer colors and fainter intrinsic magnitudes. The variable AGN candidates have Eddington ratios similar to those of X-ray-selected AGNs.
All-atom molecular dynamics (MD) simulations were used to study shock wave loading in oriented single crystals of the highly anisotropic triclinic molecular crystal 1,3,5-triamino-2,4,6-trinitrobenzene (TATB). The crystal structure consists of planar hydrogen-bonded sheets of individually planar TATB molecules that stack into graphitic-like layers. Shocks were studied for seven systematically prepared crystal orientations with limiting cases that correspond to shock propagation exactly perpendicular and exactly parallel to the graphitic-like layers. The simulations were performed for initially defect-free crystals using a reverse-ballistic configuration that generates explicit, supported shocks. Final longitudinal stress components are between ≈8.5 and ≈10.5 GPa for the 1.0 km s –1 impact speed studied. Orientation-dependent properties are reported including shock speeds, stresses, temperatures, compression ratios, and local material strain rates. Spatiotemporal maps of the temperature, stress tensor, material flow, and molecular orientations reveal complicated processes that arise for specific shock directions. Furthermore, the results indicate that TATB shock response is highly sensitive to crystal orientation, with significant qualitative differences for the time evolution of the stress tensor and temperature, elastic/inelastic compression response, defect formation and growth, critical von Mises stress, and strain rates during shock rise that span nearly an order of magnitude. A variety of inelastic deformation mechanisms are identified, ranging from crumpling of graphitic-like layers to dislocation-mediated plasticity to intense shear strain localization. To our knowledge, these are the first systematic MD simulations and analysis of explicit shock wave propagation along nontrivial crystal directions in a triclinic molecular crystal.
Not Available
We present the Materials Learning Algorithms (MALA) package, a scalable machine learning framework designed to accelerate density functional theory (DFT) calculations suitable for large-scale atomistic simulations. Using local descriptors of the atomic environment, MALA models efficiently predict key electronic observables, including local density of states, electronic density, density of states, and total energy. The package integrates data sampling, model training and scalable inference into a unified library, while ensuring compatibility with standard DFT and molecular dynamics codes. We demonstrate MALA's capabilities with examples including boron clusters, aluminum across its solid-liquid phase boundary, and predicting the electronic structure of a stacking fault in a large beryllium slab. Scaling analyses reveal MALA's computational efficiency and identify bottlenecks for future optimization. With its ability to model electronic structures at scales far beyond standard DFT, MALA is well suited for modeling complex material systems, making it a versatile tool for advanced materials research.
We present a multi-wavelength, UV-to-radio analysis for a sample of massive (M{sub *} {approx} 10{sup 10} M{sub sun}) IRAC- and MIPS 24 {mu}m detected Lyman break galaxies (LBGs) with spectroscopic redshifts z {approx} 3 in the GOODS-North field. For LBGs without individual 24 {mu}m detections, we employ stacking techniques at 24 {mu}m, 1.1 mm, and 1.4 GHz to construct the average UV-to-radio spectral energy distribution and find it to be consistent with that of a luminous infrared galaxy with L{sub IR} = 4.5{sup +1.1}{sub -2.3} x 10{sup 11} L{sub sun} and a specific star formation rate of 4.3 Gyr{sup -1} that corresponds to a mass doubling time {approx}230 Myr. On the other hand, when considering the 24 {mu}m detected LBGs we find among them galaxies with L{sub IR}>10{sup 12} L{sub sun}, indicating that the space density of z {approx} 3 UV-selected ultra-luminous infrared galaxies (ULIRGs) is {approx}(1.5 {+-} 0.5) x 10{sup -5} Mpc{sup -3}. We compare measurements of star formation rates from data at different wavelengths and find that there is tight correlation (Kendall's {tau}>99.7%) and excellent agreement between the values derived from dust-corrected UV, mid-IR, millimeter, and radio data for the whole range of L{sub IR} up to L{sub IR} {approx} 10{sup 13} L{sub sun}. This range is greater than that for which the correlation is known to hold at z {approx} 2, possibly due to the lack of significant contribution from polycyclic aromatic hydrocarbons to the 24 {mu}m flux at z {approx} 3. The fact that this agreement is observed for galaxies with L{sub IR}>10{sup 12} L{sub sun} suggests that star formation in UV-selected ULIRGs, as well as the bulk of star formation activity at this redshift, is not embedded in optically thick regions as seen in local ULIRGs and submillimeter-selected galaxies at z = 2.
Infrared-faint radio sources (IFRSs) are a rare class of objects which are relatively bright at radio wavelengths but very faint at infrared and optical wavelengths. Here we present sensitive near-infrared observations of a sample of these sources taken as part of the Spitzer Extragalactic Representative Volume Survey. Nearly all the IFRSs are undetected at a level of {approx}1 {mu}Jy in these new deep observations, and even the detections are consistent with confusion with unrelated galaxies. A stacked image implies that the median flux density is S{sub 3.6{mu}m} {approx} 0.2 {mu}Jy or less, giving extreme values of the radio-infrared flux density ratio. Comparison of these objects with known classes of object suggests that the majority are probably high-redshift radio-loud galaxies, possibly suffering from significant dust extinction.
The Mars Rover and Sample Return mission's radioisotope thermoelectric generator (RTG) is presently subjected to a structural and mass analysis in view of a reference mission scenario, an illustrative Rover design and Martian activities agenda, and RTG power system requirements and environmental constraints. The modular heat-source stack in the Rover RTG can be held together by axial load springs. The RTGs should be mounted on the Rover with a vertical orientation, in order to avoid the buildup of windborne Martian sand on its heat-rejection surfaces.
The Perseverance rover embarked on its first science campaign after landing in Jezero crater on February 18, 2021 and completing ~90 days of commissioning and Ingenuity helicopter activities. During this first campaign, Perseverance explored a large swath of Jezero’s crater floor, investigating and sampling several of the topographically lowest, and potentially oldest, rocks within the crater. Crater floor units: Perseverance explored the Máaz and Séítah formations (previously mapped as the Crater Floor Fractured Rough; Cf-fr and Crater Floor Fractured 1; Cf-f-1 units[1]). These are both widespread units in the crater that potentially correlate with units outside Jezero [2-4]. The Máaz fm. was distinguished from orbit by its mafic composition and densely cratered surface, and has various hypothesized origins, including lava flows[2] and volcaniclastic airfall [3]. The Máaz fm. is important for providing age/stratigraphic constraints on the Jezero western delta. If igneous, returned Máaz fm. samples may aid in calibrating the Mars crater chronology [2,5]and understanding Mars paleomagnetism and early igneous processes(see [6]). The Séítah fm. is olivine-bearing and has been interpreted to be related to a regional unit exposed along the inner rim of Jezero crater walls and occurs more broadly in the Nili Planum and Nili Fossae region. The olivine-bearing unit and its possible correlatives has a wide range of hypothesized origins including volcaniclastic airfall, impact melt, or aeolian and fluvial deposits [2-4,7,8]. The Séítahfm.is likely the oldest unit accessible to Perseverance and represents an important part of Jezero’s pre-delta-lacustrine history. As in the Máaz fm., the lithochemistry of the samples will help studies of early Mars igneous processes. The olivine-and carbonate-bearing components of this unit may also signify habitable conditions early in Jezero’s history, samples of which would be of high geochemical and astrobiological significance, as well as for understanding the martian carbon cycle(see [9]).
The Cp*{sub 2}Yb(L) class of compounds, where Cp* = pentamethylcyclopentadienyl = C{sub 5}Me{sub 5} and L is either a 1,4-diazabutadiene or bipy = 2,2'-bipyridine related ligand, have provided excellent analogies to the Kondo state on the nanoscale. Cp*{sub 2}Yb(4,4'-Me{sub 2}-bipy) furthers this analogy by demonstrating a valence transition as the sample is cooled below 200 K. Here, pair-distribution function (PDF) analysis of x-ray powder diffraction data demonstrate that the Cp*{sub 2}Yb(4,4'-Me{sub 2}-bipy) molecule is virtually unchanged through the valence transition. However, the molecule's stacking arrangement is altered through the valence transition.
Three-dimensional shock simulations of energetic materials have been conducted to improve our understanding of initiation at the mesoscale. Vapor-deposited films of PETN and pressed powders of HNS were characterized with a novel three-dimensional nanotomographic technique. Detailed microstructures were constructed experimentally from a stack of serial electron micrographs obtained by successive milling and imaging in a dual-beam FIB/SEM. These microstructures were digitized and imported into a multidimensional, multimaterial Eulerian shock physics code. The simulations provided insight into the mechanisms of pore collapse in PETN and HNS samples with distinctly different three-dimensional pore morphology and distribution. This modeling effort supports investigations of microscale explosive phenomenology and elucidates mechanisms governing initiation of secondary explosives.