Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Nonequilibrium behavior of the Pb wetting layer on Si(111)7×7

The growth and stability of the Pb8 x 8 wetting layer on Si(111)7 x 7, which provides a foundation for growing quantum-size-effect nanocrystals, was investigated by in situ x-ray scattering. Our experimental results reveal that the wetting-layer structure evolves temporally over a remarkably broad range of temperatures and that there are two distinct temperature regimes of nonequilibrium behavior. When grown at lower temperature (below 170 C), it was discovered that the wetting-layer structure changes with time, indicating that its disordered structure is not static; annealing in this regime improves the order of the wetting layer. Growth at higher temperature (170 C < T < 250 C), however, leads to a time-dependent degradation of the 8 x 8 structure due to the deterioration of the underlying Si(111)7 x 7. Thermal measurements determined an activation energy of 0.4 eV in the low-temperature regime, whereas in the high-temperature regime, a two-step process is observed, which has activation energies of approximately 1.3 and 1.9 eV. The results provide important considerations for understanding the anomalous kinetic behavior of quantum-size-effect Pb nanocrystals on Si(111)7 x 7, which is facilitated by the wetting layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hardness, elastic modulus, and wear resistance of hafnium oxide-based films grown by atomic layer deposition

The investigation of mechanical properties of atomic layer deposition HfO{sub 2} films is important for implementing these layers in microdevices. The mechanical properties of films change as a function of composition and structure, which accordingly vary with deposition temperature and post-annealing. This work describes elastic modulus, hardness, and wear resistance of as-grown and annealed HfO{sub 2}. From nanoindentation measurements, the elastic modulus and hardness remained relatively stable in the range of 163–165 GPa and 8.3–9.7 GPa as a function of deposition temperature. The annealing of HfO{sub 2} caused significant increase in hardness up to 14.4 GPa due to film crystallization and densification. The structural change also caused increase in the elastic modulus up to 197 GPa. Wear resistance did not change as a function of deposition temperature, but improved upon annealing.

36 MATERIALS SCIENCE↗

Structural consideration on the emission properties of Eu²⁺-doped Ba(Sr, Ca)₂MgSi₂O₈

Emission properties of Eu²⁺-doped Ba(Sr, Ca)₂MgSi₂O₈ are discussed in terms of the crystal structure refined by Rietveld method. Ba(Sr, Ca)₂MgSi₂O₈ has glaserite-type layered structure. In response to Sr/(Sr+Ca) ratio, the layer-framework build up by corner-sharing of MgO₆ octahedra and SiO₄ tetrahedra twists around C₃ axes to match the size of B-site cation (Sr²⁺/Ca²⁺). This twist significantly affects the unit cell size and the coordination environment around B-site. Eu²⁺-doped Ba(Sr, Ca)₂MgSi₂O₈ exhibited blue emission under ultraviolet irradiation. The emission spectra have been characterized by two emission components derived from Eu²⁺ ions occupying A- and B-site. Both components showed similar wavelength shift for different Sr/(Sr+Ca), in response to Si–O₁ polarization and to the structural change. - Graphical abstract: Emission properties of Eu²⁺-doped Ba(Sr, Ca)₂MgSi₂O₈ are discussed in terms of the crystal structure refined by Rietveld method. Highlights: • Glaserite-type Ba(Sr, Ca)₂MgS₂O₈ has been prepared by a solid state reaction. • Ba(Sr, Ca)₂MgSi₂O₈ changes the crystal structure, depending on Sr/(Sr+Ca) ratio. • Eu²⁺-doped Ba(Sr, Ca)₂MgSi₂O₈ exhibits blue emission under ultraviolet irradiation. • Emission from Ba(Sr, Ca)₂MgSi₂O₈ is characterized by two Eu²⁺ emission components. • The two emissions show wavelength shift in a similar manner against Sr/(Sr+Ca)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Differentiating Three-Dimensional Molecular Structures Using Laser-Induced Coulomb Explosion Imaging

Coulomb explosion imaging (CEI) with x-ray free electron lasers has recently been shown to be a powerful method for obtaining detailed structural information of gas-phase planar ring molecules [R. Boll et al., X-ray multiphoton-induced Coulomb explosion images complex single molecules, Nat. Phys. 18, 423 (2022).]. In this Letter, we investigate the potential of CEI driven by a tabletop laser and extend this approach to differentiating three-dimensional structures. We study the static CEI patterns of planar and nonplanar organic molecules that resemble the structures of typical products formed in ring-opening reactions. Here, our results reveal that each molecule exhibits a well-localized and distinctive pattern in three-dimensional fragment-ion momentum space. We find that these patterns yield direct information about the molecular structures and can be qualitatively reproduced using a classical Coulomb explosion simulation. Our findings suggest that laser-induced CEI can serve as a robust method for differentiating molecular structures of organic ring and chain molecules. As such, it holds great promise as a method for following ultrafast structural changes, e.g., during ring-opening reactions, by tracking the motion of individual atoms in pump-probe experiments.

74 ATOMIC AND MOLECULAR PHYSICS↗

Vanadium Substitution Dictates H Atom Uptake at Lindqvist-type Polyoxotungstates

Understanding how modification of molecular structures changes the thermochemistry of H atom uptake can provide design criteria for the formation of highly active catalysts for reductive transformations. Herein, we describe the effect of doping an atomically precise polyoxotungstate with vanadium on proton-coupled electron transfer (PCET) reactivity. The Lindqvist-type polyoxotungstate [W 6 O 19 ] 2– displays reversible redox chemistry, which was found to be unchanged in the presence of acid, indicating an inability to couple reduction with protonation. However, the incorporation of a single vanadium center into the structure significantly changes the reactivity, and the potential required for one-electron reduction of [VW 5 O 19 ] 3– was shown to vary with the strength of the acid added. Construction of a potential-pK a diagram allowed assessment of the thermodynamics of H atom uptake, indicating BDFE(O–H) ≈ 64 kcal/mol, while chemical synthesis of the reduced/protonated derivative (TBA) 3 [VW 5 O 19 H] was used to probe the position of protonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic Contraction across the Lanthanide Series Decreases the Temperature-Induced Disorder of the Water Coordination Sphere

In liquid, temperature affects the structures of lanthanide complexes in multiple ways that depend upon complex interactions between ligands, anions, and solvent molecules. The relative simplicity of lanthanide aqua ions (Ln 3+ ) make them well suited to determine how temperature induces structural changes in lanthanide complexes. In this work, we performed a combination of ab initio molecular dynamics (AIMD) simulations and extended X-ray absorption fine structure (EXAFS) measurements, both at 25 and 90 °C, to determine how temperature affects the first- and second-coordination spheres of three Ln 3+ (Ce 3+ , Sm 3+ , and Lu 3+ ) aqua ions. AIMD simulations show first lanthanide coordination spheres that are similar at 25 and 90 °C, more so for the Lu 3+ ion that remains as eight-coordinate than for the Ce 3+ and Sm 3+ ions that change their preferred coordination number from nine (at 25 °C) to eight (at 90 °C). The measured EXAFS spectra are very similar at 25 and 90 °C, for the Ce 3+ , Sm 3+ , and Lu 3+ ions, suggesting that the dynamical disorder of the Ln 3+ ions in liquid water is sufficient such that temperature-induced changes do not clearly manifest changes in the structure of the three ions. Both AIMD simulations and EXAFS measurements show very similar structures of the first coordination sphere of the Lu 3+ ion at 25 and 90 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Icosahedral short-range order in amorphous Cu80Si20 by ab initio molecular dynamics simulation study

Short-range order in liquid and amorphous structures of Cu80Si20 is studied by ab initio molecular dynamics simulations. We performed the simulations at 1140 and 300 K respectively to investigate the local structure change from liquid to amorphous. The result of structure factor in comparison with experimental data indicates that our simulation of amorphous Cu80Si20 is reliable. By using the bond-angle distribution function, Honeycutt–Andersen index, Voronoi tessellation method, and the atomistic cluster alignment method, the icosahedral short-range order in the system is revealed. Strong Cu–Si interaction was also observed.

36 MATERIALS SCIENCE↗

In-situ investigation of the vibrational properties of H 2 O CO 2 -bearing and dry K-rich basaltic glasses at high pressure by mid infrared spectroscopy

Here, the vibrational properties of CO 2 –H 2 O-bearing and dry synthetic K-rich basaltic glasses were investigated at room temperature and pressures between 0.0001–5.5 GPa using the diamond anvil cell combined with in situ reflectance and transmittance Fourier Transform infrared micro-spectroscopy. The absorption coefficient a(v) calculated from the Kramers-Kronig relation shows that glasses are dominated by the Q 2 aluminosilicate unit followed by Q 1 , Q 3 . The variation in Q n concentration upon compression suggests that glasses undergo polymerization from ambient pressure to 2 GPa followed by less marked structural changes up to 4 GPa, above which the structure is further polymerized. Once decompressed, glasses retained a polymerized structure. Our results show that 1.03 wt% CO 2 -1.42 wt% H 2 O in a glass with 3.10 wt% K 2 O and 46.77 wt% SiO 2 prevent the formation of fully polymerized connections when cold-compressed. Our results can be used to explain the effect of volatiles and alkali on the rheology of natural basaltic magmas.

36 MATERIALS SCIENCE↗

The impact of aqueous medium on zeolite framework integrity

Understanding the zeolite framework stability in aqueous phase is crucial to develop stable catalysts. Al K–edge, extended X–ray absorption fine structure and 27Al MAS NMR spectroscopies in combination with DFT calculations have been used to monitor both qualitative and quantitative structural changes of two well–characterized samples with BEA structure. The effects of various properties on stability were explored, including Al concentration, Al distribution, particle size and structural defects. As the samples were degraded by treatment in hot liquid water, the local structure about the Al T–site remained mostly intact, including the Al–O–Si angles and bond distances, while the nano–scale crystalline structure as measured by XRD and TEM was disrupted. The combined data suggest a three–step mechanism in which, initially, the HBEA framework crystallinity decreases via hydrolysis of T–O bonds along polymorph stacking faults and inter–grain boundaries in a mode similar to crack propagation in glass. With prolonged exposure, amorphization occurs via hydrolysis of surface Si–OH groups propagating inward through the zeolite lattice. In parallel, cracks propagate within the crystalline micro–domains along paths through specific T–O–T groups. Authors thank B. W. Arey (PNNL) for HIM measurements, T. Huthwelker for support during Al XAFS measurements at the Swiss Light Source (PSI, Switzerland) and M. Y. Hu (PNNL) for support during NMR experiments. This work was supported by the U. S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. NMR experiments were performed at the Environmental Molecular Science Laboratory, a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research, and Physical Science Laboratory both located at Pacific Northwest National Laboratory (PNNL). PNNL is a multi–program national laboratory operated for DOE by Battelle under Contract No. DE–AC05–76RL01830.

Environmental Molecular Sciences Laboratory↗

Effect of Synthetic Method and Annealing Temperature on the Structure of Hollandite-Type Oxides

Hollandite is a class of metal oxide material with the general formula A 2 B 8 O 16 . Several methods have been used in the synthesis of this type of metal oxide, and the synthetic methods reported have typically employed high annealing temperatures between 1200 and 1300 °C. Appropriate synthetic methods must be employed to successfully synthesize these hollandite-type oxides at lower annealing temperatures. Hollandite compounds have been synthesized using ceramic (high annealing temperature only) and coprecipitation (high and low annealing temperatures) methods. Annealing temperatures ranging from 1200 to 700 °C have been employed in the thermal treatment process. In this work, powder X-ray diffraction and X-ray absorption near-edge spectroscopy (XANES) were conducted on hollandite-type oxides (Ba x Al 2 x Ti 8–2 x O 16–δ ; x = 1.2; and Ba x Al x Fe x Ti 8–2 x O 16–δ, Ba x Fe 2 x Ti 8–2 x O 16–δ ; x = 1.16). Structural comparisons between materials annealed in the temperature range from 1200 to 800 °C were made, and an examination of the XANES spectra and powder X-ray diffraction patterns has provided confirmation of the absence of significant structural changes in these hollandite materials. This study has shown that hollandite-type materials can be formed using annealing temperatures as low as 700–800 °C when a coprecipitation method is used, with little change to the local and long-range structures being detected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The room temperature crystal structure of a bacterial phytochrome determined by serial femtosecond crystallography

Phytochromes are a family of photoreceptors that control light responses of plants, fungi and bacteria. A sequence of structural changes, which is not yet fully understood, leads to activation of an output domain. Time-resolved serial femtosecond crystallography (SFX) can potentially shine light on these conformational changes. Here we report the room temperature crystal structure of the chromophore-binding domains of the Deinococcus radiodurans phytochrome at 2.1 Å resolution. The structure was obtained by serial femtosecond X-ray crystallography from microcrystals at an X-ray free electron laser. We find overall good agreement compared to a crystal structure at 1.35 Å resolution derived from conventional crystallography at cryogenic temperatures, which we also report here. The thioether linkage between chromophore and protein is subject to positional ambiguity at the synchrotron, but is fully resolved with SFX. As a result, the study paves the way for time-resolved structural investigations of the phytochrome photocycle with time-resolved SFX.

59 BASIC BIOLOGICAL SCIENCES↗

Atomic structure of granulin determined from native nanocrystalline granulovirus using an X-ray free-electron laser

To understand how molecules function in biological systems, new methods are required to obtain atomic resolution structures from biological material under physiological conditions. Intense femtosecond-duration pulses from X-ray free-electron lasers (XFELs) can outrun most damage processes, vastly increasing the tolerable dose before the specimen is destroyed. This in turn allows structure determination from crystals much smaller and more radiation sensitive than previously considered possible, allowing data collection from room temperature structures and avoiding structural changes due to cooling. Regardless, high-resolution structures obtained from XFEL data mostly use crystals far larger than 1 μm3 in volume, whereas the X-ray beam is often attenuated to protect the detector from damage caused by intense Bragg spots. Here, we describe the 2 Å resolution structure of native nanocrystalline granulovirus occlusion bodies (OBs) that are less than 0.016 μm3 in volume using the full power of the Linac Coherent Light Source (LCLS) and a dose up to 1.3 GGy per crystal. The crystalline shell of granulovirus OBs consists, on average, of about 9,000 unit cells, representing the smallest protein crystals to yield a high-resolution structure by X-ray crystallography to date. The XFEL structure shows little to no evidence of radiation damage and is more complete than a model determined using synchrotron data from recombinantly produced, much larger, cryocooled granulovirus granulin microcrystals. Furthermore, our measurements suggest that it should be possible, under ideal experimental conditions, to obtain data from protein crystals with only 100 unit cells in volume using currently available XFELs and suggest that single-molecule imaging of individual biomolecules could almost be within reach.

36 MATERIALS SCIENCE↗

Using neutron protein crystallography to understand enzyme mechanisms

A description is given of the results of neutron diffraction studies of the structures of four different metal-ion complexes of deuterated d-xylose isomerase. A description is given of the results of neutron diffraction studies of the structures of four different metal-ion complexes of deuterated d-xylose isomerase. These represent four stages in the progression of the biochemical catalytic action of this enzyme. Analyses of the structural changes observed between the various three-dimensional structures lead to some insight into the mechanism of action of this enzyme.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of cholesterol and ceramide VI on the structure of multilamellar lipid membranes at water exchange

The structural changes in the multilamellar lipid membranes of dipalmitoylphosphatidylcholine (DPPC)/cholesterol and DPPC/ceramide VI binary systems during hydration and dehydration have been studied by neutron diffraction. The effect of cholesterol and ceramide on the kinetics of water exchange in DPPC membranes is characterized. Compared to pure DPPC, membranes of binary systems swell faster during hydration (with a characteristic time of {approx}30 min). Both compounds, ceramide VI and cholesterol, similarly affect the hydration of DPPC membranes, increasing the repeat distance due to the bilayer growth. However, in contrast to cholesterol, ceramide significantly reduces the thickness of the membrane water layer. The introduction of cholesterol into a DPPC membrane slows down the change in the parameters of the bilayer internal structure during dehydration. In the DPPC/ceramide VI/cholesterol ternary system (with a molar cholesterol concentration of 40%), cholesterol is partially released from the lamellar membrane structure into the crystalline phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tailoring Redox Active Ligands for Probing the Reactivity of Actinides

With this project, we aim to further enhance our understanding of fundamental f-element chemistry, including electronic structure and bonding behaviors. Key project goals include the characterization of actinide complexes bearing redox-active ligands, including those of lower-oxidation state uranium, and examining how structural changes to the ligand and coordination sphere affect structure and bonding. Redox-active and redox non-innocent ligands have been used widely in transition metal chemistry, but uranium complexes with redox-active ligands are surprisingly rare. We recently reported the synthesis of the redox-active ligand, “phen-BIAN” (N,N’-bis(iminophenol)acenaphthene), in an investigation of the electronic behavior of uranium and other actinides. This ligand framework borrows features from two classes of Schiff base ligands—the tetradentate O-N-N-O binding pocket from salens, and the redox-active α-diimine unit and backbone from Ar-BIANs (N,N’-bis[(aryl)imino]acenaphthenes, which can accept up to four electrons upon reduction. To continue this work, the electronics of uranyl and thorium complexes will be probed using the reduced forms of these ligands, using these in the preparation of lower-oxidation state and non-oxo uranium complexes. Additional members of the phen-BIAN family will be synthesized, including naphthol and thiol derivative. With these we can characterize the influence of substitutent groups on the redox activity, coordination geometry, and covalent interactions. The work proposed here entails extensive preparation, structural and spectroscopic characterization, of an array of actinide complexes. This will allow us to address probative questions about the nature of actinide bonding, the degree of covalency, the validity of lanthanides as models for the actinides, hard-soft interactions, magnetic interactions between metals in bimetallic complexes and what combination of electronic and steric affects produce an actinide selective ligand. The latter will assist greatly in providing a benchmark against which to compare and evaluate the distinct behaviors exhibited by 5f-element complexes. This will enable us to learn about the differences in binding between the 4f lanthanides and the 5f elements like uranium and plutonium. Such difference in binding can be exploited in separations and the development of new materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Use of Gene Modification and Advanced Molecular Structure Analyses towards Improving Alfalfa Forage

Alfalfa is one of the most important legume forage crops in the world. In spite of its agronomic and nutritive advantages, alfalfa has some limitations in the usage of pasture forage and hay supplement. High rapid degradation of protein in alfalfa poses a risk of rumen bloat to ruminants which could cause huge economic losses for farmers. Coupled with the relatively high lignin content, which impedes the degradation of carbohydrate in rumen, alfalfa has unbalanced and asynchronous degradation ratio of nitrogen to carbohydrate (N/CHO) in rumen. Genetic engineering approaches have been used to manipulate the expression of genes involved in important metabolic pathways for the purpose of improving the nutritive value, forage yield, and the ability to resist abiotic stress. Such gene modification could bring molecular structural changes in alfalfa that are detectable by advanced structural analytical techniques. These structural analyses have been employed in assessing alfalfa forage characteristics, allowing for rapid, convenient and cost-effective analysis of alfalfa forage quality. In this article, we review two major obstacles facing alfalfa utilization, namely poor protein utilization and relatively high lignin content, and highlight genetic studies that were performed to overcome these drawbacks, as well as to introduce other improvements to alfalfa quality. We also review the use of advanced molecular structural analysis in the assessment of alfalfa forage for its potential usage in quality selection in alfalfa breeding.

59 BASIC BIOLOGICAL SCIENCES↗

Electrochemical behavior of heavily cycled nickel electrodes in Ni/H2 cells containing electrolytes of various KOH concentrations

A study has been made of charge and discharge voltage changes with cycling of Ni/H2 cells containing electrolytes of various KOH concentrations. A study has also been made of electrochemical behavior of the nickel electrodes from the cycled Ni/H2 cells as a function of overcharge amounts. Discharge voltages depressed gradually with cycling for cells having high KOH concentrations (31 to 36 percent), but the voltages increased for those having low KOH concentrations (21 to 26 percent). To determine if there was a crystallographic change of the active material due to cycling, electrochemical behavior of nickel electrodes was studied in an electrolyte flooded cell containing either 31 or 26 percent KOH electrolyte as a function of the amount of overcharge. The changes in discharge voltage appear to indicate crystal structure changes of active material from gamma-phase to beta-phase in low KOH concentrations, and vice versa in high KOH concentration.

Lim, H. S.↗

Preliminary metallographic studies of ball fatigue under rolling-contact conditions

The metallurgical results produced on balls tested in the rolling-contact fatigue spin rig were studied by metallographic examination. Origin and progression of fatigue failures were observed. These evaluations were made on SAE 52100 and AISI M-1 balls fatigue tested at room temperature (80 F) and 200 to 250 F. Most failures originated subsurface in shear; inclusions, structure changes, and directionalism adversely affected ball fatigue life. Structures in the maximum-shear-stress region of the balls of both materials were stable at room temperature and unstable at 200 to 250 F. Failures were of the same type as those found in full-scale bearings.

SURFACES, CONTACT - ROLLING↗