Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface plasmon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Wave scattering and guidance by dielectric waveguides with periodic surfaces

The extended-boundary-condition method is used to solve the wave scattering and guidance by a stratified medium with a periodic surface. First, the transition matrix for two sets of Flocquet waves incident from above and below a periodic surface separating the two media is derived. The results are applied to the diffraction of an incident plane wave by a multilayered medium having a periodic surface. The theoretical results can easily be applied to the guidance problem for which the complex guiding constant of the periodic structure is obtained. Numerical results for both the scattering and the guidance problems are obtained. The theory is compared with experiment for metallic gratings with surface-plasmon excitations. The calculated guiding constants of a thin film with a periodic sinusoidal surface are also compared with other numerical methods.

Chuang, S. L.↗

Structural And Functional Characterization of CC Chemokine CCL14

CC chemokine ligand 14, CCL14, is a human CC chemokine that is of recent interest because of its natural ability, upon proteolytic processing of the first eight NH{sub 2}-terminal residues, to bind to and signal through the human immunodeficiency virus type-1 (HIV-1) co-receptor, CC chemokine receptor 5 (CCR5). We report X-ray crystallographic structures of both full-length CCL14 and signaling-active, truncated CCL14 [9-74] determined at 2.23 and 1.8 {angstrom}, respectively. Although CCL14 and CCL14 [9-74] differ in their ability to bind CCR5 for biological signaling, we find that the NH{sub 2}-terminal eight amino acids (residues 1 through 8) are completely disordered in CCL14 and both show the identical mode of the dimeric assembly characteristic of the CC type chemokine structures. However, analytical ultracentrifugation studies reveal that the CCL14 is stable as a dimer at a concentration as low as 100 nM, whereas CCL14 [9-74] is fully monomeric at the same concentration. By the same method, the equilibrium between monomers of CCL14 [9-74] and higher order oligomers is estimated to be of EC{sub 1,4} = 4.98 {mu}M for monomer-tetramer conversion. The relative instability of CCL14 [9-74] oligomers as compared to CCL14 is also reflected in the K{sub d}'s that are estimated by the surface plasmon resonance method to be {approx}9.84 and 667 nM for CCL14 and CCL14 [9-74], respectively. This {approx}60-fold difference in stability at a physiologically relevant concentration can potentially account for their different signaling ability. Functional data from the activity assays by intracellular calcium flux and inhibition of CCR5-mediated HIV-1 entry show that only CCL14 [9-74] is fully active at these near-physiological concentrations where CCL14 [9-74] is monomeric and CCL14 is dimeric. These results together suggest that the ability of CCL14 [9-74] to monomerize can play a role for cellular activation.

36 MATERIALS SCIENCE↗

Scattering of electromagnetic pulses on metallic nanospheres with the inclusion of plasmon interference effects

The spectral–angular features of the scattering of electromagnetic pulses with various durations (from quasimonochromatic to ultrashort) on metallic nanoparticles in a dielectric medium have been studied for various parameters of the problem. It has been shown that the character of the interference of contributions from surface plasmons with various multipole orders significantly depends on the scattering angle and is responsible for sharp features in the scattering spectrum of monochromatic radiation. The dependence of the probability and scattering spectrum on the duration of a pulse and the scattering angle has been analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Subsurface Synthesis and Characterization of Ag Nanoparticles Embedded in MgO

Metal nanoparticles exhibit localized surface plasmon resonance (LSPR) which is very sensitive to the size and shape of the nanoparticle and the dielectric medium surrounding it. LSPR causes field enhancement near the surface of the nanoparticle making them interesting candidates for plasmonic applications. In particular, partially exposed metallic nanoparticles distributed in a dielectric matrix form hotspots which are prime locations for LSPR spectroscopy and sensing. This study involves synthesizing partially buried Ag nanoparticles in MgO and investigating the characteristics of this material system. Ag nanoparticles of different shapes and size distributions were synthesized below the surface of MgO by implanting 200 keV Ag+ ions followed by annealing at 10000C for 10 and 30 hours. A detailed optical and structural characterization was carried out to understand the evolution of Ag nanoparticle microstructure and size distribution inside the MgO matrix. Micro x-ray diffraction (MicroXRD) was employed to investigate the structural properties and estimate the crystallite size. The nanoparticles evolved from a spherical to faceted morphology with annealing time, assuming an octahedral shape truncated at the (001) planes as seen from aberration corrected transmission electron microscopy (TEM) images. The nanoparticles embedded in MgO were shown to be pure metallic Ag using atom probe tomography (APT). The nanoparticles were partially exposed to the surface employing plasma etch techniques to remove the overlaying MgO. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were employed to study the surface morphology and obtain a height distribution for the partially exposed nanoparticles.

Environmental Molecular Sciences Laboratory↗

Plasmonic gold nanoparticles modified titania nanotubes for antibacterial application

Close-packed TiO{sub 2} nanotube arrays are prepared on metallic Ti surface by electrochemical anodization. Subsequently, by magnetron sputtering, Au nanoparticles are coated onto the top sidewall and tube inwall. The Au@TiO{sub 2} systems can effectively kill Staphylococcus aureus and Escherichia coli in darkness due to the existence of Au nanoparticles. On the basis of classical optical theories, the antibacterial mechanism is proposed from the perspective of localized surface plasmon resonance. Respiratory electrons of bacterial membrane transfer to Au nanoparticles and then to TiO{sub 2}, which makes bacteria steadily lose electrons until death. This work provides insights for the better understanding and designing of noble metal nanoparticles-based plasmonic heterostructures for antibacterial application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ultrafast dynamics of metal plasmons induced by 2D semiconductor excitons in hybrid nanostructure arrays

With the advanced progress achieved in the field of nanotechnology, localized surface plasmons resonances (LSPRs) are actively considered to improve the efficiency of metal-based photocatalysis, photodetection, and photovoltaics. Here, we report on the exchange of energy and electric charges in a hybrid composed of a two-dimensional tungsten disulfide (2D-WS 2 ) monolayer and an array of aluminum (Al) nanodisks. Femtosecond pump-probe spectroscopy results indicate that within ~830 fs after photoexcitation of the 2D-WS 2 semiconductor, energy transfer from the 2D-WS 2 excitons excites the plasmons of the Al array. Then, upon the radiative and/or nonradiative damping of these excited plasmons, energy and/or electron transfer back to the 2D-WS 2 semiconductor takes place as indicated by an increase in the reflected probe at the 2D exciton transition energies at later time-delays. This simultaneous exchange of energy and charges between the metal and the 2D-WS 2 semiconductor resulted in an extension of the average lifetime of the 2D-excitons from ~15 to ~58 ps in absence and presence of the Al array, respectively. Furthermore, the indirectly excited plasmons were found to live as long as the 2D-WS 2 excitons exist. Furthermore, the demonstrated ability to generate exciton-plasmons coupling in a hybrid nanostructure may open new opportunities for optoelectronic applications such as plasmonic-based photodetection and photocatalysis.

2D Materials↗

Terahertz plasmonic Bessel beamformer

We experimentally demonstrate terahertz Bessel beamforming based on the concept of plasmonics. The proposed planar structure is made of concentric metallic grooves with a subwavelength spacing that couple to a point source to create tightly confined surface waves or spoof surface plasmon polaritons. Concentric scatterers periodically incorporated at a wavelength scale allow for launching the surface waves into free space to define a Bessel beam. The Bessel beam defined at 0.29 THz has been characterized through terahertz time-domain spectroscopy. This approach is capable of generating Bessel beams with planar structures as opposed to bulky axicon lenses and can be readily integrated with solid-state terahertz sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetism of a cobalt-gold planar nanostructure on the silicon surface

The structural and magnetic properties of a cobalt nanolayer placed between a silicon substrate and a protective gold layer are studied. At a cobalt layer mass thickness of 1-2 nm, a nanoisland structure is shown to form. This thickness range is characterized by a local maximum of the magnetooptical Kerr effect and enhanced nonlinear optical and magnetic nonlinear optical responses at the second-harmonic frequency. This enhancement can be caused by the excitation of local surface plasmons and an increase in the local fields at the probing-radiation and second-harmonic frequencies in metallic nanoislands. The surface-sensitive nonlinear magnetooptical Kerr effect at the second-harmonic frequency is maximal at a cobalt layer thickness of about 2 nm, which corresponds to the characteristic scale of magnetization formation in the near-surface layer in cobalt.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel Plasmonic Photocathodes for Electron-Ion Colliders

Our aim was to explore new photocathode materials and schemes to develop strategies and technologies for next generation nuclear physics accelerator capabilities, particularly for Electron Ion Colliders (EIC). We successfully implemented an experimental setup for light incidence at an acute angle onto metallic photocathodes in UHV, in order to excite surface Plasmon resonance, hence increasing light absorption by the metallic surface and tested the photoemitted current. We successfully tested the setup with a hot cathode as well as Plasmonic silver-MgO samples and obtained excellent results. We extended our studies to shorter wavelengths to help defeat the work function of the metal. We also used oblique incidence thin film deposition onto gratings to achieve optimized Plasmonic excitation leading to stronger EM field and also lower emittance. We tested and used adequate software to model our samples and simulate our experimental results. We incorporated the concept of Fano resonances applied to gratings to better interpret our experimental results.

36 MATERIALS SCIENCE↗

Quantum Symmetry Breaking of Exciton/Polaritons in a Metal-Nanorod Plasmonic Array

We study the collective, superradiant behavior in the system of emitter-dressed Ag nanorods. Starting from the Drude model for the plasmon oscillations, we arrive at a semi-empirical Hamiltonian describing the coupling between quantized surface plasmon modes and the quantum emitters that can be controlled by manipulating their geometry, spacing, and orientation. Further, identifying the lowest polariton mode as SPstates dressed by excitons in the vicinity of k = 0, we examine conditions allowing for the polariton quantum phase transition. While the system is formally a 1D array, we show that the polariton states of interest can undergo a quantum phase transition to form a Bose condensate at finite temperatures for physically accessible parameter ranges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plasmon-Induced Hot-Carrier Excited-State Dynamics in Plasmonic Semiconductor Nanocrystals

The variance of carrier relaxation pathways for WO 3–x plasmonic semiconductor nanocrystals (PSNCs) is monitored by transient absorption spectroscopy following excitation of the localized surface plasmon resonance (LSPR) versus the optical band gap (E g,opt ). Excitation of the LSPR leads to efficient hot carrier population above the Fermi level in WO 3–x via Landau damping, in analogy to noble metal LSPR relaxation mechanisms. Hot carrier depopulation occurs on the femtosecond timescale, observed as the concomitant recovery of an LSPR bleach with the appearance of discrete interband and intraband photoinduced absorption features. Further, by comparison, the direct excitation of E g,opt results in trion recombination at donor–acceptor sites within the WO 3–x NC, consistent with exciton decay dynamics observed for typical wide-band-gap semiconductor NCs. From the analysis of pump power dependency data, a hot-carrier electron–phonon coupling constant of 1.47 × 10 11 J K –1 s –1 cm –3 is extracted. The direct comparison of the decay dynamics following E g,opt versus LSPR excitation confirms that the observed plasmon in trioctylphosphine oxide passivated, spherical WO 3–x is a resonance state in which hot carriers are generated only from excitation on resonance with the LSPR frequency. This study on WO 3–x PSNCs provides a toolset that can be used to evaluate the role of hot carriers following LSPR excitation of n-type, plasmonic transparent conducting oxide NCs, where enhancement of photocatalysis, photovoltaic performance, and optical enhancement has been reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control of plasmons in topological insulators via local perturbations

Here, we use a fully quantum mechanical approach to demonstrate control of plasmonic excitations in prototype models of topological insulators by molecule-scale perturbations. Strongly localized surface plasmons are present in the host systems, arising from the topologically nontrivial single-particle edge states. A numerical evaluation of the random phase approximation equations for the perturbed systems reveals how the positions and the internal electronic structure of the added molecules affect the degeneracy of the locally confined collective excitations, i.e., shifting the plasmonic energies of the host system and changing their spatial charge density profile. In particular, we identify conditions under which significant charge transfer from the host system to the added molecules occurs. Furthermore, the induced field energy density in the perturbed topological systems due to external electric fields is determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Minimal model for spoof acoustoelastic surface states

Similar to textured perfect electric conductors for electromagnetic waves sustaining artificial or spoof surface plasmons we present an equivalent phenomena for the case of sound. Aided by a minimal model that is able to capture the complex wave interaction of elastic cavity modes and airborne sound radiation in perfect rigid panels, we construct designer acoustoelastic surface waves that are entirely controlled by the geometrical environment. Comparisons to results obtained by full-wave simulations confirm the feasibility of the model and we demonstrate illustrative examples such as resonant transmissions and waveguiding to show a few examples of many where spoof elastic surface waves are useful.

36 MATERIALS SCIENCE↗

Self-assembled nanoparticle aggregates: Organizing disorder for high performance surface-enhanced spectroscopy

The coherent oscillations of the surface electron gas, known as surface plasmons, in metal nanostructures can give rise to the localization of intense electromagnetic fields at the metal-dielectric interface. These strong fields are exploited in surface enhanced spectroscopies, such as Surface Enhanced Raman Scattering (SERS), for the detection and characterization of molecules at very low concentration. Still, the implementation of SERS-based biosensors requires a high level of reproducibility, combined with cheap and simple fabrication methods. For this purpose, SERS substrates based on self-assembled aggregates of commercial metallic nanoparticles (Nps) can meet all the above requests. Following this line, we report on a combined micro-Raman and Atomic Force Microscopy (AFM) analysis of the SERS efficiency of micrometric silver Np aggregates (enhancement factors up to 10{sup 9}) obtained by self-assembly. Despite the intrinsic disordered nature of these Np clusters, we were able to sort out some general rules relating the specific aggregate morphology to its plasmonic response. We found strong evidences of cooperative effects among the NPs within the cluster and namely a clear dependence of the SERS-efficiency on both the cluster area (basically linear) and the number of stacked NPs layers. A cooperative action among the superimposed layers has been proved also by electromagnetic simulations performed on simplified nanostructures consisting of stacking planes of ordered Nps. Being clear the potentialities of these disordered self-assembled clusters, in terms of both easy fabrication and signal enhancement, we developed a specific nanofabrication protocol, based on electron beam lithography and molecular functionalization, that allowed for a fine control of the Np assemblies into designed shapes fixing their area and height. In particular, we fabricated 2D ordered arrays of disordered clusters choosing gold Nps owing to their high stability. AFM measurements confirmed the regularity in spacing and size (i.e. area and layer number) of the aggregates. Preliminary SERS measurements confirm the high signal enhancement and demonstrate a quite good reproducibility over large number of aggregates within 100×100 μm{sup 2} 2D super-structure. The availability of such a multisensor could allow a careful statistical analysis of the SERS response, thus leading to a reliable quantitative estimate of the presence of relevant molecular species even at ultra-low concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasmon Enhanced Photoemission

Next generation ultrabright light sources will operate at megahertz repetition rates with temporal resolution in the attosecond regime. For an X-Ray Free Electron Laser (FEL) to operate at such repetition rate requires a high quantum efficiency (QE) cathode to produce electron bunches of 300 pC per 1.5 μJ incident laser pulse. Semiconductor photocathodes have sufficient QE in the ultraviolet (UV) and the visible spectrum, however, they produce picosecond electron pulses due to the electron-phonon scattering. On the other hand, metals have two orders of magnitude less QE, but can produce femtosecond pulses, that are required to form the optimum electron distribution for high efficiency FEL operation. In this work, a novel metallic photocathode design is presented, where a set of nano-cavities is introduced on the metal surface to increase its QE to meet the FEL requirements, while maintaining the fast time response. Photoemission can be broken up into three steps: (1) photon absorption, (2) electron transport to the surface, and (3) crossing the metal-vacuum barrier. The first two steps can be improved by making the metal completely absorbing and by localizing the fields closer to the metal surface, thereby reducing the electron travel distance. Both of these effects can be achieved by coupling the incident light to an electron density wave on the metal surface, represented by a quasi-particle, the Surface Plasmon Polariton (SPP). The photoemission then becomes a process where the photon energy is transferred to an SPP and then to an electron. The dispersion relation for the SPP defines the region of energies where such process can occur. For example, for gold, the maximum SPP energy is 2.4 eV, however, the work function is 5.6 eV, therefore, only a fourth order photoemission process is possible. In such process, four photons excite four plasmons that together excite only one electron. The yield of such non-linear process depends strongly on the light intensity. In this work, the structure consisted of rectangular nano-grooves (NGs) arranged in a subwavelength grating on a metal surface is presented that provides a dramatic increase in the metal’s absorption, field localization, and field enhancement. When light is polarized perpendicular to the orientation of the grooves a standing SPP wave is excited along the vertical walls in the NGs, that act as Fabry-Perot resonators. By adjusting the geometry of the NGs and the period of the subwavelength grating the resonance can be fine tuned to a desired position, for example, the laser fundamental wavelength, anywhere from the UV to the near infrared (NIR). Two types of gratings are presented: (a) a gold grating with period of 600 nm, and (b) an aluminum-gold grating with a period of 100 nm; both with resonance at 720 nm. In each case, strong on-resonance absorption was observed, with over 98% for grating (b). Unlike the grating-coupled SPP waves, where the angle is well defined by the momentum matching condition, the resonant NGs allow coupling to the standing modes at a range of angles of incidence, referred to as the angular bandwidth. A new model for the on-resonance absorption based on the ensamble action of the NGs is presented that serves as the basis for a design of an NG grating with an ultrawide spectral as well as angular bandwidth. For sample (b), the angular bandwidth is 80 degrees, corresponding to an opening angle of 160 degrees. The photoemission enhancement for such a grating was measured to be seven orders of magnitude for a four-photon photoemission. This is an incredible result demonstrating the power of the plasmonic grating presented, which is an efficient light trapper and field enhancer for a non-linear processes. These results demonstrate that the metal photocathode prepared with a NG grating on the metal surface will provide sufficient pulse charge driven by a 1 μJ 15fs pulsed laser at 800 nm for the optimum FEL operation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Homogeneous nano-patterning using plasmon-assisted photolithography

We report an innovative lithography system appropriate for fabricating sharp-edged nanodot patterns with nanoscale accuracy using plasmon-assisted photolithography. The key technology is two-photon photochemical reactions of a photoresist induced by plasmonic near-field light and the scattering component of the light in a photoresist film. The scattering component of the light is a radiation mode from higher order localized surface plasmon resonances scattered by metallic nanostructures.

36 MATERIALS SCIENCE↗

Plasmonic formation mechanism of periodic 100-nm-structures upon femtosecond laser irradiation of silicon in water

The formation of laser-induced periodic surface structures (LIPSS) upon irradiation of silicon by multiple (N = 100) linearly polarized Ti:sapphire femtosecond laser pulses (duration τ = 30 fs, center wavelength λ{sub 0} ∼ 790 nm) is studied experimentally in air and water environment. The LIPSS surface morphologies are characterized by scanning electron microscopy and their spatial periods are quantified by two-dimensional Fourier analyses. It is demonstrated that the irradiation environment significantly influences the periodicity of the LIPSS. In air, so-called low-spatial frequency LIPSS (LSFL) were found with periods somewhat smaller than the laser wavelength (Λ{sub LSFL} ∼ 0.7 × λ{sub 0}) and an orientation perpendicular to the laser polarization. In contrast, for laser processing in water a reduced ablation threshold and LIPSS with approximately five times smaller periods Λ{sub LIPSS} ∼ 0.15 × λ{sub 0} were observed in the same direction as in air. The results are discussed within the frame of recent LIPSS theories and complemented by a thin film based surface plasmon polariton model, which successfully describes the tremendously reduced LIPSS periods in water.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of annealing on the optical properties of vacuum deposited silver thin films

Thin Silver films of thickness 15nm were prepared by thermal evaporation on well cleaned glass substrates at room temperature at a pressure of 2×10{sup −5} mbar with the deposition rate of 0.01À/sec and annealed in air for an hour at temperatures between 300°c and 400°c. The prepared films were characterized by X-ray diffraction (XRD), UV-visible spectroscopy and AFM. The mean grain size of the film at different annealing temperatures was determined by the X-ray diffraction pattern by using Scheer’s formula. It is found that from absorbance studies surface Plasmon peak position decreases as the annealing temperature increases and blue shifted. And also from transmittance studies the thermal effect of silver film strongly affects the optical transmittance. From AFM studies the average particle size and RMS surface roughness increase with increase of annealing temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗