Search NASA⌕ Search

SEARCH · Search NASA

Results for “system specification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Communication architecture for large geostationary platforms

Large platforms have been proposed for supporting multipurpose communication payloads to exploit economy of scale, reduce congestion in the geostationary orbit, provide interconnectivity between diverse earth stations, and obtain significant frequency reuse with large multibeam antennas. This paper addresses a specific system design, starting with traffic projections in the next two decades and discussing tradeoffs and design approaches for major components including: antennas, transponders, and switches. Other issues explored are selection of frequency bands, modulation, multiple access, switching methods, and techniques for servicing areas with nonuniform traffic demands. Three-major services are considered: a high-volume trunking system, a direct-to-user system, and a broadcast system for video distribution and similar functions. Estimates of payload weight and d.c. power requirements are presented. Other subjects treated are: considerations of equipment layout for servicing by an orbit transfer vehicle, mechanical stability requirements for the large antennas, and reliability aspects of the large number of transponders employed.

Bond, F. E.↗
NASA NTRS1980

Surface Accuracy Measurement Sensor for Deployable Reflector Antennas (SAMS DRA)

Specifications, system configurations, and concept tests for surface measurement sensors for deployable reflector antennas are presented. Two approaches toward the optical measurement of remote target displacements are discussed: optical ranging, in which the basic measurement is target-to-sensor range; and in particular, optical angular sensing, in which the principle measurements are of target angular displacements lateral to the line of sight. Four representative space antennas are examined.

Neiswander, R. S.↗
NASA NTRS1979

Clock performance, reliability and cost interrelationships

Problems encountered by clock manufacturers in attempting to supply reasonably priced, reliable clocks for critical aerospace applications arise from the inherent technical difficulties of designing and fabricating equipment to provide performance at the limits of the state of the art in demanding environments. The difficulties are compounded by inconsistent and unstandardized specification practices, and by an emphasis on initial acquisition costs, rather than on life cycle costs. Conventional parts stress analyses, which do not provide a useful indication of the reliability of a clock, lead to increased parts costs for high performance aerospace clocks without comensurate benefits in improved reliability or performance. The characterization of clocks in terms of the mean time between resynchronizations, facilitates the estimation of life cycle costs and provides a means to evaluate clocks in a realistic fashion for specific systems applications.

Levine, M. W.↗
NASA NTRS1980

User's manual for MMLE3, a general FORTRAN program for maximum likelihood parameter estimation

A user's manual for the FORTRAN IV computer program MMLE3 is described. It is a maximum likelihood parameter estimation program capable of handling general bilinear dynamic equations of arbitrary order with measurement noise and/or state noise (process noise). The theory and use of the program is described. The basic MMLE3 program is quite general and, therefore, applicable to a wide variety of problems. The basic program can interact with a set of user written problem specific routines to simplify the use of the program on specific systems. A set of user routines for the aircraft stability and control derivative estimation problem is provided with the program.

Maine, R. E.↗
NASA NTRS1981

Feasibility of collision warning, precision approach and landing using GPS, volume 1

The use of GPS, with an appropriately configured data link, to enhance general aviation avionic functions encountered in the terminal area and on approach was investigated with emphasis on approach and landing guidance and collision warning. The feasibility of using differential GPS to obtain the precision navigation solutions required for landing was studied. Results show that the concept is sound. An experimental program was developed to demonstrate this concept. The collision avoidance/warning concept was examined through the development of a functional system specification.

Ruedger, W. H.↗
NASA NTRS1981

Remote Raman measurement techniques

The use of laser Raman measurement techniques in remote sensing applications is surveyed. A feasibility index is defined as a means to characterize the practicality of a given remote Raman measurement application. Specific applications of Raman scattering to the measurement of atmospheric water vapor profiles, methane plumes from liquid natural gas spills, and subsurface ocean temperature profiles are described. This paper will survey the use of laser Raman measurement techniques in remote sensing applications using as examples specific systems that the Computer Genetics Corporation (CGC) group has developed and engineered.

Leonard, D. A.↗
NASA NTRS1982

Normal modes of a compound drop

The modes are characterized by their frequency, the attendant displacement of fluid boundaries, and the flow pressure fields within the fluids. The drops consist of three fluids; a core fluid, a fluid shell surrounding the core, and a host fluid surrounding the shell. These fluids are assumed to be inviscid and incompressible, and the core and the shell to be concentric. The theory is obtained by linearization of the equations of fluid motion to the lowest order of nonlinearity that yields the normal modes. Numerical values of mode frequencies and the associated relative displacements of the fluid boundaries are presented for several specific systems, and the results compared with observations.

Saffren, M.↗
NASA NTRS1982

Evaluation of high temperature structural adhesives for extended service

The evaluation, selection, and demonstration of structural adhesive systems for supersonic cruise research applications, and establishment of environmental durability of selected systems for up to 20,000 hours is described. Ten candidate adhesives were initially evaluated. During screening and evaluation, these candidates were narrowed to three of the most promising for environmental durability testing. The three adhesives were LARC-13, PPQ, and NR056X. The LARC-13 was eliminated because of a lack of stability at 505 K. The NRO56X was removed from the market. The LARC-TPI was added after preliminary evaluation and an abbreviated screening test. Only PPQ and LARC-TPI remained as the reasonable candidates late into the durability testing. Large area bond panels were fabricated to demonstrate the processibility of the selected systems. Specifications were prepared to assure control over critical material and process parameters. Surface characterization concentrated primarily upon titanium surface treatments of 10 volt chronic acid anodize, 5 volt chromic acid anodize and PASA-JELL. Failure analysis was conducted on lap shear adhesive bond failures which occurred in PPQ and LARC-13 test specimens after 10,000 hours at 505 K.

Hill, S. G.↗
NASA NTRS1980

Risetime distortion of Shuttle Ku-band payload 50 MBPS data due to coaxial cable skin effects

This paper discusses distortion of digital signals generated in the Space Shuttle Ku-band communications systems. Specifically, the degradation considered is due to coaxial cables which interface data and clock from a source located in the payload bay to the KuSPA (Ku-Band Signal Processor Assembly) located in the avionics bay of the Shuttle. Due to the length (nearly 100 feet) and relatively narrow bandwidth of the cable, the clock and data waveforms are significantly affected by this transmission medium. This paper presents a closed form model that closely approximates the distortion of the waveforms measured in laboratory tests.

Schadelbauer, S.↗
NASA NTRS1981

Cumulative hardware distortion effects on coded and uncoded performance via a satellite repeater

An analytical investigation is presented of the cumulative impact of numerous hardware-induced distortions on BPSK bit-error-rate performance. Attention is given to 16 user and eight transponder constraints, as well as to the effect of filter bandlimiting. Uncoded and coded performance is evaluated with respect to both NRZ and Manchester signaling formats, and tight upper bounds to coded and uncoded SNR degradation are determined. Computed results based on TDRSS (Tracking and Data Relay Satellite System) specifications are presented as an example.

Benjamin, T.↗
NASA NTRS1983

Algorithms for estimation in distributed models with applications to large space structures

The author discussed the theoretical and computational results for spline based approximation schemes used in parameter estimation algorithms for distributed systems. Specific applications include beam-like structures described by the Euler-Bernoulli and Timoshenko theories and antenna surfaces such as that in the deployable Maypole Hoop/Column model.

Banks, H. T.↗
NASA NTRS1982

Design guidelines for the testability of microprocessor based logic designs

This paper deals with the issue of designing microprocessor based systems with testability in mind. The ease of eventual testability should be a design consideration from the earliest design stage. Design guidelines with explicit examples for ease of testability are given. The issue of testing microprocessors as contrasted with testing random logic design is addressed, and procedures are delineated for the testability of microprocessors. Microprocessor testability design guidelines are discussed both at the design stage of the microprocessor itself as well as at the stage where the processor is imbedded as a component in a larger system. Specific instances and examples of a collection of design do's and don'ts are provided.

Mathur, F. P.↗
NASA NTRS1982

100 kWe MPD thruster system design

A MPD thruster subsystem point design is presented that may be applicable to a wide variety of NASA/DoD missions. The system is electrically matched to a 100 kWe thermoelectric-nuclear supply and operates the thruster in a pulsed, quasi-steady mode on cryogenically stored argon. The overall system efficiency is 52% which includes efficiencies of the electrolytic capacitor energy store, constant power charging unit, thyristor switch, and assumes a 60% thruster efficiency. The system specific mass is 21.6 kg/kWe. Various technology improvements are discussed which could reduce the specific mass to under 10 kg/kWe, while simultaneously increasing the efficiency and reducing the overall subsystem complexity.

King, D. Q.↗
NASA NTRS1983

Space Shuttle contamination measurements from flights STS-1 through STS-4

Results of contamination measurements performed on the initial four flights of the Space Shuttle Orbiter are summarized and compared with requirements contained in the Space Shuttle Flight and Ground System Specifications and those formulated by the Contamination Requirements Definition Group. In general, the results of measurements carried out with the induced environment contamination monitor indicate that molecular fluxes, deposition rates, and average counts of particulates are within the requirements and close to predicted values. Among the exceptions, were such special circumstances as water dumps, payload bay door closures, and RCS engine, APU, and flash evaporator operations which led to molecular and particulate contamination levels exceeding the limits. In cases where these circumstances would interfere with sensitive payload operations, careful mission planning to preclude a contamination source by operational limitation should be done to avoid losses.

Ehlers, H. K. F.↗
NASA NTRS1981

Parameter estimation of nonlinear nonautonomous distributed systems

We present an abstract approximation framework for estimation of parameters in nonlinear nonautonomous distributed systems. Specific examples involving linear spline approximations for retarded delay equations and cubic spline approximations for parabolic partial differential equations are discussed and shown to be included as special cases of our general framework.

Banks, H. T.↗
NASA NTRS1983

Image Matching Using Generalized Hough Transforms

An image matching system specifically designed to match dissimilar images is described. A set of blobs and ribbons is first extracted from each image, and then generalized Hough transform techniques are used to match these sets and compute the transformation that best registers the image. An example of the application of the approach to one pair of remotely sensed images is presented.

Davis, L. S.↗
NASA NTRS1983

Statistical Analysis of a Debugging Model

Suppose that a system is undergoing a sequence of trials and design changes in an effort to find and eliminate design flaws in the system. Specifically, suppose that each trial is classified as an assignable cause failure (if the failure is due to one or more design flaws), an inherent failure (if the failure is not due to a design flaw), or a success. After each assignable cause failure, the design flaws that caused the failure are removed. In the case of statistically independent and identical design flaws, a probabilistic model is developed to describe this debugging process. Explicit expressions are obtained for the distributions of the important random variables and for the important measures of reliability. Statistical methods are developed for estimating the parameters of the model from accumulated test data.

Siegrist, K.↗
NASA NTRS1983

Centaur D-1A guidance/software system

The main body of this paper describes the evolution of the Centaur D-1A Guidance and Software System. Specifically, the performance of the explicit guidance equations, using a linear tangent steering law. Inherent flexibility exists in the equations in that they have multimission capability. They can accommodate both Earth-orbital and Earth-escape missions with either one or two Centaur burns. They can also guide for multi-burn orbital missions. The Centaur performance is indicated in terms of optimality (propellant usage), accuracy, flexibility and computer requirements. In the course of the Centaur Guidance development substantial changes and improvements have been made and more improvements are on the way for the Shuttle/Centaur Guidance. It is the intent of this paper to describe, provide insight into, and identify certain unique aspects of the individual Centaur flight profiles. Mission profile(s) are described narratively with some numerical data given in cases where it may be useful.

Gordan, A. L.↗