Search NASA⌕ Search

SEARCH · Search NASA

Results for “temporal analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Automated mesoscale winds derived from GOES multispectral imagery

An automated technique for extracting mesoscale winds from sequences of GOES VISSR image pairs was developed, tested and configured for quasi-real time/research applications on a computing system which gives mesoscale wind estimates at the highest spatial/temporal resolution possible from the VISSR imagery down to a wind vector separation of 10 km. Preprocessing of imagery using IR resampling, VIS edge preserving filtering, and reduced VIS resolution averaging improved height assignments and vector extraction for 10, 15, and 30 min imagery. An objective quality control system provides much greater than 99% accuracy in eliminating questionable wind estimates. Automated winds generally have better spatial coverage and density, and have random error estimates half as large as the manual winds. Dynamical analysis of cloud wind divergence revealed temporally consistent convergence centers on the meso beta scale that are highly correlated with on going and future developing convective storms. The entire system of computer codes was successfully vectorized for execution on an array processor resulting in job turnaround in less than one hour.

Wilson, G. S.↗

HOST structural analysis program overview

Hot section components of aircraft gas turbine engines are subjected to severe thermal structural loading conditions, especially during the start up and take off portions of the engine cycle. The most severe and damaging stresses and strains are those induced by the steep thermal gradients induced during the start up transient. These transient stresses and strains are also the most difficult to predict, in part because of the temperature gradients and distributions are not well known or readily predictable, and also because the cyclic elastic viscoplastic behavior of the materials at these extremes of temperature and strain are not well known or readily predictable. A broad spectrum of structures related technology programs is underway to address these deficiencies. One element of the structures program is developing improved time varying thermal mechanical load models for the entire engine mission cycle from start up to shutdown. Another major part of the program is the development of new and improved nonlinear 3-D finite elements and associated structural analysis programs, including the development of temporal elements with time dependent properties to account for creep effects in the materials and components.

Johns, R. H.↗

Subseasonal and interannual variations of tropical convection and the El Nino/Southern Oscillation

It was found that during the northern winter, fluctuation in tropical convection is dominated by eastware propagating cloud clusters from the Indian Ocean. Most of these clusters reach as far as the central Pacific. Longitude time sections of outgoing longwave radiation (OLR) anomaly along the equator show that there are about 3 to 4 such episodes each winter. Also, simultaneous OLR anomalies over the equatorial central Pacific (ECP) and the maritime continent (MC) are negatively correlated and their variations are dominated by a 40 to 60 day period, suggesting the presence of a standing wave phenomenon. Such combination of propagating and standing phenomena can be captured by the extended empirical orthogonal function (EEOF) analysis. The EEOF method combines the temporal as well as the spatial correlation information to produce eigenmodes which have space time dependence. A 5 day and a 10 day lag in addition to the simultaneous spatial correlation is used.

Lau, K. M.↗

Strat-trop exchange

Exchange between the stratosphere and troposphere is important to the chemical composition of both regions. The export of ozone from the stratosphere provides the troposphere with a means of initiating photochemistry. The precursor molecules originating from the planetary surface provide the stratosphere with its chemical feedstock from which the ozone-controlling HO(x), NO(x), and Cl(x) photochemistries are driven. The tropopause is defined both statistically and in a local, synoptic sense by the value P(sub theta) = .000016 K sq m/kg/s, taken from an objective analysis of 8 years of zonal, temporal mean cross sections of potential temperature, wind and potential vorticity.

Tuck, A. F.↗

Quasi-biennial modulation of planetary-wave fluxes in the Northern Hemisphere winter

Using 25 years of National Meteorological Center (NMC) data for 1964-88 the relation between tropical and extratropical quasi-biennial oscillations (QBOs) was examined for zonally averaged quantities and planetary-wave Eliassen-Palm fluxes in the Northern Hemisphere winter. The extratropical QBO discussed by Holton and Tan (1980) existed in both temporal halves of the dataset. Autocorrelation analysis demonstrated that it was an important mode of interannual variability in the extratropical winter stratosphere. Correlation with the tropics was strongest when 40-mb equatorial winds were used to define the tropical QBO. Easterly phase at 40 mb implied a weaker than normal polar night jet and warmer than normal polar temperature and vice versa. An opposite relationship was obtained using 10-mb equatorial winds. The association between tropical and extratropical QBOs was observed in about 90 percent of the winters and was statistically significant. It is shown that planetary-wave Eliassen-Palm fluxes were generally consistent with the extratropical QBO. These fluxes were more (less) convergent in the midlatitude (subtropical) upper stratosphere in the 40-mb east (= easterly) phase category relative to the west category.

Dunkerton, Timothy J.↗

Real time quantitative imaging for semiconductor crystal growth, control and characterization

A quantitative real time image processing system has been developed which can be software-reconfigured for semiconductor processing and characterization tasks. In thermal imager mode, 2D temperature distributions of semiconductor melt surfaces (900-1600 C) can be obtained with temperature and spatial resolutions better than 0.5 C and 0.5 mm, respectively, as demonstrated by analysis of melt surface thermal distributions. Temporal and spatial image processing techniques and multitasking computational capabilities convert such thermal imaging into a multimode sensor for crystal growth control. A second configuration of the image processing engine in conjunction with bright and dark field transmission optics is used to nonintrusively determine the microdistribution of free charge carriers and submicron sized crystalline defects in semiconductors. The IR absorption characteristics of wafers are determined with 10-micron spatial resolution and, after calibration, are converted into charge carrier density.

Wargo, Michael J.↗

An algorithm for extraction of periodic signals from sparse, irregularly sampled data

Temporal gaps in discrete sampling sequences produce spurious Fourier components at the intermodulation frequencies of an oscillatory signal and the temporal gaps, thus significantly complicating spectral analysis of such sparsely sampled data. A new fast Fourier transform (FFT)-based algorithm has been developed, suitable for spectral analysis of sparsely sampled data with a relatively small number of oscillatory components buried in background noise. The algorithm's principal idea has its origin in the so-called 'clean' algorithm used to sharpen images of scenes corrupted by atmospheric and sensor aperture effects. It identifies as the signal's 'true' frequency that oscillatory component which, when passed through the same sampling sequence as the original data, produces a Fourier image that is the best match to the original Fourier space. The algorithm has generally met with succession trials with simulated data with a low signal-to-noise ratio, including those of a type similar to hourly residuals for Earth orientation parameters extracted from VLBI data. For eight oscillatory components in the diurnal and semidiurnal bands, all components with an amplitude-noise ratio greater than 0.2 were successfully extracted for all sequences and duty cycles (greater than 0.1) tested; the amplitude-noise ratios of the extracted signals were as low as 0.05 for high duty cycles and long sampling sequences. When, in addition to these high frequencies, strong low-frequency components are present in the data, the low-frequency components are generally eliminated first, by employing a version of the algorithm that searches for non-integer multiples of the discrete FET minimum frequency.

Wilcox, J. Z.↗

Quantifying BRDF Effects in Comparing Landsat-7 and AVIRIS Near-Simultaneous Acquisitions for Studies of High Plains Vegetation Cover

Approximately 100,000 sq. km of the High Plains of the central United States are covered by sand dunes and sand sheets deposited during the Holocene. Soil-dating evidence shows that there were at least four periods of dune reactivation during major droughts in the last 10,000 years. The dunes in this region are anchored by vegetation. We have undertaken a study of land-use change in the High Plains from 1985 to the present using Landsat 5 TM and Landsat 7 ETM+ images to map variation in vegetation cover during wet and dry years. Mapping vegetation cover of less than 20% is important in modeling potential surface reactivation since at this level the vegetation no longer sufficiently shields sandy surfaces from movement by wind. Landsat TM data have both the spatial resolution and temporal coverage to facilitate vegetation cover analysis for model development and verification. However, there is still the question of how accurate TM data are for the measurement of both growing and senescent vegetation in and and semi-arid regions. AVIRIS provides both high spectral resolution as well as high signal-to-noise ratio and can be used to test the accuracy of Landsat TM and ETM+ data. We have analyzed data from AVIRIS flown nearly concurrently with a Landsat 7 overpass. The comparison between an AVIRIS image swath of 11 km width subtending a 30 deg. angle and the same area covered by a 0.8 deg. angle from Landsat required accounting for the BRDF. A normalization technique using the ratio of the reflectances from registered AVIRIS and Landsat data proved superior to the techniques of column averaging on AVIRIS data alone published previously by Kennedy et al. This technique can be applied to aircraft data covering a wider swath angle than AVIRIS to develop BRDF responses for a wide variety of surfaces more efficiently than from ground measurements.

Goetz, A. F. H.↗

From Informal Safety-Critical Requirements to Property-Driven Formal Validation

Most of the efforts in formal methods have historically been devoted to comparing a design against a set of requirements. The validation of the requirements themselves, however, has often been disregarded, and it can be considered a largely open problem, which poses several challenges. The first challenge is given by the fact that requirements are often written in natural language, and may thus contain a high degree of ambiguity. Despite the progresses in Natural Language Processing techniques, the task of understanding a set of requirements cannot be automatized, and must be carried out by domain experts, who are typically not familiar with formal languages. Furthermore, in order to retain a direct connection with the informal requirements, the formalization cannot follow standard model-based approaches. The second challenge lies in the formal validation of requirements. On one hand, it is not even clear which are the correctness criteria or the high-level properties that the requirements must fulfill. On the other hand, the expressivity of the language used in the formalization may go beyond the theoretical and/or practical capacity of state-of-the-art formal verification. In order to solve these issues, we propose a new methodology that comprises of a chain of steps, each supported by a specific tool. The main steps are the following. First, the informal requirements are split into basic fragments, which are classified into categories, and dependency and generalization relationships among them are identified. Second, the fragments are modeled using a visual language such as UML. The UML diagrams are both syntactically restricted (in order to guarantee a formal semantics), and enriched with a highly controlled natural language (to allow for modeling static and temporal constraints). Third, an automatic formal analysis phase iterates over the modeled requirements, by combining several, complementary techniques: checking consistency; verifying whether the requirements entail some desirable properties; verify whether the requirements are consistent with selected scenarios; diagnosing inconsistencies by identifying inconsistent cores; identifying vacuous requirements; constructing multiple explanations by enabling the fault-tree analysis related to particular fault models; verifying whether the specification is realizable.

Cimatti, Alessandro↗

Re-evaluation of an Optimized Second Order Backward Difference (BDF2OPT) Scheme for Unsteady Flow Applications

Recent experience in the application of an optimized, second-order, backward-difference (BDF2OPT) temporal scheme is reported. The primary focus of the work is on obtaining accurate solutions of the unsteady Reynolds-averaged Navier-Stokes equations over long periods of time for aerodynamic problems of interest. The baseline flow solver under consideration uses a particular BDF2OPT temporal scheme with a dual-time-stepping algorithm for advancing the flow solutions in time. Numerical difficulties are encountered with this scheme when the flow code is run for a large number of time steps, a behavior not seen with the standard second-order, backward-difference, temporal scheme. Based on a stability analysis, slight modifications to the BDF2OPT scheme are suggested. The performance and accuracy of this modified scheme is assessed by comparing the computational results with other numerical schemes and experimental data.

Vatsa, Veer N.↗

First Image Products from EcoSAR - Osa Peninsula, Costa Rica

Designed especially for forest ecosystem studies, EcoSAR employs state-of-the-art digital beamforming technology to generate wide-swath, high-resolution imagery. EcoSARs dual antenna single-pass imaging capability eliminates temporal decorrelation from polarimetric and interferometric analysis, increasing the signal strength and simplifying models used to invert forest structure parameters. Antennae are physically separated by 25 meters providing single pass interferometry. In this mode the radar is most sensitive to topography. With 32 active transmit and receive channels, EcoSARs digital beamforming is an order of magnitude more versatile than the digital beamforming employed on the upcoming NISAR mission. EcoSARs long wavelength (P-band, 435 MHz, 69 cm) measurements can be used to simulate data products for ESAs future BIOMASS mission, allowing scientists to develop algorithms before the launch of the satellite. EcoSAR can also be deployed to collect much needed data where BIOMASS satellite wont be allowed to collect data (North America, Europe and Arctic), filling in the gaps to keep a watchful eye on the global carbon cycle. EcoSAR can play a vital role in monitoring, reporting and verification schemes of internationals programs such as UN-REDD (United Nations Reducing Emissions from Deforestation and Degradation) benefiting global society. EcoSAR was developed and flown with support from NASA Earth Sciences Technology Offices Instrument Incubator Program.

InSAR↗

How Long Is Too Long? Variogram Analysis of AERONET Data to Aid Aerosol Validation and Intercomparison Studies

Geophysical data sets derived from satellite sensors, ground/airborne instrumentation, and computational models are often compared against each other. A common example is the validation of satellite aerosol optical depth (AOD) retrievals against measurements from Aerosol Robotic Network (AERONET) Sun photometers. Spatiotemporal mismatch between data set sampling means that uncaptured variation in the underlying geophysical field introduces apparent disagreement into such comparisons, known as representation or collocation matchup uncertainty. This study uses variogram analysis of AERONET data to estimate temporal mismatch uncertainties and decorrelation time scales for the global AERONET record. As well as total AOD, the fine‐ and coarse‐mode AODs, Ångström Exponent (AE), and fine‐mode fraction (FMF) of AOD are analyzed. Globally, a time difference of 30 min typically induces from 0.011–0.035 variation in AOD. For total, fine, and coarse AODs the typical time to decorrelation is around 2–10 days. For AE and FMF it is 3–33 days; that is, aerosol systems often persist significantly longer than individual events in them. Biomass burning regions tend to show the largest and fastest subdaily AOD variability and also longest times to decorrelation. Some sites show significant season‐to‐season variations in behavior. These results can be used to inform site‐specific time collocation thresholds for aerosol validation analyses and account for temporal variation when estimating data set uncertainty. They also have implications for comparisons between different satellite products or models, data aggregation, and time series analyses. Results are provided on a site‐by‐site basis to facilitate use by other researchers.

satellite↗

First-Order Runtime Verification using BDDs

Runtime Verification (RV) expedites the analyses of execution traces for detecting system errors and for statistical and quality analysis. Having started modestly, with checking temporal properties that are based on propositional (yes/no) values, the current practice of RV often involves properties that are parametrized by the data observed in the input trace. The specifications are based on various formalisms, such as automata, temporal logics, rule systems, and stream processing. Checking execution traces that are data intensive against a specification that imposes strong dependencies between the data, poses a nontrivial challenges; in particular if runtime verification has to be performed online, while many events that carry data appear within small time proximities. Towards achieving this goal, it was recently suggested to represent relations over the observed data values, based on BDDs, where data elements are enumerated and then converted into bit vectors. This representation provided a very simple and natural extension of an RV algorithm from propositional to first-order LTL, but more importantly, was shown to contribute to the memory compactness and to the speed, as was demonstrated using a corresponding implementation. We extend here the capabilities of BDD-based RV with the ability to express timing constraints, where the monitored events include (integer) clock values. We show how to efficiently operate on BDDs that represent both relations on (enumerations of) values and time dependencies, as required by the addition of the time constraints. We demonstrate our algorithm with an efficient implementation and provide experimental results.

Peled, Doron↗

File Specification for MERRA-2 Climate Statistics Products

The Modern Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) contains a wealth of information that can be used for weather and climate studies. By combining the assimilation of observations with a frozen version of the Goddard Earth Observing System (GEOS), a global analysis is produced at an hourly temporal resolution spanning from January 1980 through present (Gelaro et al., 2017). It can be difficult to parse through a multidecadal dataset such as MERRA-2 to evaluate the interannual variability of weather that occurs on a daily timescale, let alone determine the occurrence of an extreme weather event. Furthermore, it was recognized that standard metrics were needed to evaluate climate change among climate models and international research efforts. As a result of these concerns, the Expert Team on Climate Change Detection and Indices (ETCCDI) developed a set of indices that represent the frequency and intensity of extreme weather events using a daily time series of 2-m air temperature (T2m) and precipitation (Alexander et al., 2016). These indices were used as a basis to comprise a list of fields that represent daily extreme temperature and precipitation events, heatwaves, multi-day precipitation, as well monthly percentile statistics from the MERRA-2 dataset. Also included in this data product is a climatological long term mean and standard deviation representing the interannual variability on a monthly timescale.

MERRA-2↗

Investigating the Numerical Stability of Using an Impedance Boundary Condition to Model Broadband Noise Scattering With Acoustic Liners

Reducing aircraft noise is a major objective in the field of computational aeroacoustics. When designing next generation quiet aircraft, it is important to be able to accurately and efficiently predict the acoustic scattering by an aircraft body from a given noise source. Acoustic liners are an effective tool for achieving aircraft noise reduction and are characterized by a frequency-dependent impedance value. Converted into the time-domain using Fourier transforms, an impedance boundary condition can be used to simulate the acoustic wave scattering by geometric bodies treated with acoustic liners. A Broadband Impedance Model will be discussed in which the liner impedance is specified along a wide range of frequencies. The liner impedance boundary condition will be derived and coupled with a time-domain boundary integral equation to model acoustic scattering by a flat plate consisting of both un-lined and lined surfaces. The scattering solution will be obtained iteratively using both spatial and temporal basis functions and the stability will be demonstrated through eigenvalue analysis. Stability will be assessed for its dependence on time step, spatial discretization, as well as temporal basis function order. Both second- and third-order Lagrange temporal basis functions are considered.

acoustics↗

Systematic image-driven analysis of the spatial Drosophila embryonic expression landscape

Discovery of temporal and spatial patterns of gene expression is essential for understanding the regulatory networks and development in multicellular organisms. We analyzed the images from our large-scale spatial expression data set of early Drosophila embryonic development and present a comprehensive computational image analysis of the expression landscape. For this study, we created an innovative virtual representation of embryonic expression patterns using an elliptically shaped mesh grid that allows us to make quantitative comparisons of gene expression using a common frame of reference. Demonstrating the power of our approach, we used gene co-expression to identify distinct expression domains in the early embryo; the result is surprisingly similar to the fate map determined using laser ablation. We also used a clustering strategy to find genes with similar patterns and developed new analysis tools to detect variation within consensus patterns, adjacent non-overlapping patterns, and anti-correlated patterns. Of the 1800 genes investigated, only half had previously assigned functions. The known genes suggest developmental roles for the clusters, and identification of related patterns predicts requirements for co-occurring biological functions.

59 BASIC BIOLOGICAL SCIENCES↗

NASA GES DISC On-line Visualization and Analysis System for Gridded Remote Sensing Data

The ability to use data stored in the current NASA Earth Observing System (EOS) archives for studying regional or global phenomena is highly dependent on having a detailed understanding of the data's internal structure and physical implementation. Gaining this understanding and applying it to data reduction is a time-consuming task that must be undertaken before the core investigation can begin. This is an especially difficult challenge when science objectives require users to deal with large multi-sensor data sets that are usually of different formats, structures, and resolutions. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) has taken a major step towards meeting this challenge by developing an infrastructure with a Web interface that allows users to perform interactive analysis online without downloading any data, the GES-DISC Interactive Online Visualization and Analysis Infrastructure or "Giovanni." Giovanni provides interactive, online, analysis tools for data users to facilitate their research. There have been several instances of this interface created to serve TRMM users, Aerosol scientists, Ocean Color and Agriculture applications users. The first generation of these tools support gridded data only. The user selects geophysical parameters, area of interest, time period; and the system generates an output on screen in a matter of seconds. The currently available output options are: Area plot averaged or accumulated over any available data period for any rectangular area; Time plot time series averaged over any rectangular area; Hovmoller plots image view of any longitude-time and latitude-time cross sections; ASCII output for all plot types; Image animation for area plot. Another analysis suite deals with parameter intercomparison: scatter plots, temporal correlation maps, GIs-compatible outputs, etc. This allow user to focus on data content (i.e. science parameters) and eliminate the need for expensive learning, development and processing tasks that are redundantly incurred by an archive's user community. The current implementation utilizes the GrADS-DODS Server (GDS), and provides subsetting and analysis services across the Internet for any GrADS-readable dataset. The subsetting capability allows users to retrieve a specified temporal and/or spatial subdomain from a large dataset, eliminating the need to download everything simply to access a small relevant portion of a dataset. The analysis capability allows users to retrieve the results of an operation applied to one or more datasets on the server. We use this approach to read pre-processed binary files and/or to read and extract the needed parts directly from HDF or HDF-EOS files. These subsets then serve as inputs into GrADS analysis scripts. It can be used in a wide variety of Earth science applications: climate and weather events study and monitoring; modeling. It can be easily configured for new applications.

Leptoukh, Gregory G.↗

Investigating the Numerical Stability of Using an Impedance Boundary Condition to Model Broadband Noise Scattering With Acoustic Liners

Reducing aircraft noise is a major objective in the field of computational aeroacoustics. When designing next generation quiet aircraft, it is important to be able to accurately and efficiently predict the acoustic scattering by an aircraft body from a given noise source. Acoustic liners are an effective tool for achieving aircraft noise reduction and are characterized by a frequency-dependent impedance value. Converted into the time-domain using Fourier transforms, an impedance boundary condition can be used to simulate the acoustic wave scattering by geometric bodies treated with acoustic liners. A Broadband Impedance Model will be discussed in which the liner impedance is specified along a wide range of frequencies. The liner impedance boundary condition will be derived and coupled with a time-domain boundary integral equation to model acoustic scattering by a flat plate consisting of both un-lined and lined surfaces. The scattering solution will be obtained iteratively using both spatial and temporal basis functions and the stability will be demonstrated through eigenvalue analysis. Stability will be assessed for its dependence on time step, spatial discretization, as well as temporal basis function order. Both second- and third-order Lagrange temporal basis functions are considered.

acoustics↗