Search NASA⌕ Search

SEARCH · Search NASA

Results for “test effectiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

The Challenges of Troubleshooting

Troubleshooting work presents electrical and other workers with a challenging combination of physical hazards, working conditions, and time pressure, which can lead to unwanted outcomes if not carefully managed.Summaries of several incidents in which workers were injured or at risk of injury while performing troubleshooting work are presented, identifying organizational weaknesses and error precursors that contributed to each incident.The primary challenges include:Deranged equipment. Equipment that needs troubleshooting is not in a normal operating condition. Actions that are safe when the equipment is in a normal state may not be safe in the deranged state.Work planning and control. The steps taken in troubleshooting are most often determined by the results of the immediately previous diagnostic test, making effective work planning challenging.Multiple types of hazards. Most equipment will present a troubleshooting worker with several types of hazards, including hazardous energy as defined in 29 CFR 1910.147. Portions of the troubleshooting activity may be infeasible without these hazards present.Time pressure. Restoring operation of failed equipment often involves an explicit or implicit sense of urgency.Equipment design and construction. The physical construction of the equipment in large part will determine to which hazards troubleshooters may be exposed. It will also determine which hazards may be encountered while performing the servicing needed to restore the equipment or system to operation.There are effective methods for addressing each challenge, most of which require a combination of advance preparation and management commitment.

Mertz, David E.↗

Charge Prediction of Lipid Fragments in Mass Spectrometry

An artificial neural network is developed for predicting which fragment is charged and which fragment is neutral for lipid fragment pairs produced from a liquid chromatography tandem mass spectrometry simulation process. This charge predictor is integrated into software developed at PNNL for in silico spectra generation and identification of metabolites known as Met ISIS. To test the effect of including charge prediction in Met ISIS, 46 lipids are used which show a reduction in false positive identifications when the charge predictor is utilized.

Met ISIS↗

Multiobjective Model of Time-of-Use and Stepwise Power Tariff for Residential Consumers in Regulated Power Markets

Here, time-of-use (TOU) rates and stepwise power tariff (SPT) are important economic levers to motivate residents to shift their electricity usage in response to electricity price. In this paper, a new multiobjective optimal tariff-making model of time-of-use and stepwise power tariff (TOUSPT) is proposed, which combines the complementary characteristics of two power tariffs, for residential energy conservation and peak load shaving. In the proposed approach, the residential demand response with price elasticity in regulated power market is considered to determine the optimum peak-valley TOU tariffs for each stepwise electricity partition. Furthermore, a practical case study is implemented to test the effectiveness of the proposed TOUSPT, and the results demonstrate that TOUSPT can achieve efficient end-use energy saving and also shift load from peak to off-peak periods.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Network-Level Traffic Signal Cooperation: A Higher-Order Conflict Graph Approach

Traffic signal control and cooperation are extremely important to alleviate traffic congestion in a large traffic network. This study develops a higher-order conflict graph approach for network-wide traffic signal control and cooperation. A conflict graph is applied to model the traffic signal configurations, which identifies the conflict and unconflicted movements for each intersection. In conflict graph, the node represents each movement. The weight of each node can be defined as traffic volume, queue length, fuel consumption, or any weighted combinations of these measurements. The calculation of the optimal green light duration and green light sequence (for different movements) is equivalent to sequentially finding the maximum weight independent set (MWIS) in the conflict graph. The conflict graph also provides a uniform and efficient way to connect traffic signal operations among nearby intersections spatially. Then, we introduced the concept of the k -th order neighborhood to model the degree of connectivity between each movement to the movements at upstream or downstream intersections. The weight of each node in the higher-order conflict graph not only represents its own congestion level, but also relates to the traffic conditions of nearby intersections. Through this approach, the cooperation of multiple intersections can be realized by incorporating their spatial connectivity into conflict graph and solving the MWIS problem. A simulation network is built in SUMO to test the effectiveness of the proposed method. Results suggested that the proposed model outperformed other state-of-the-art signal control methods. Also, the scheme maintains good performance under varying traffic demands.

42 ENGINEERING↗

Data-Driven Stochastic Transmission Expansion Planning

Due to the significant improvements of power generation technologies and the trend of replacing traditional power plants with renewable generation resources, the generation portfolio will experience dramatic changes in the near future. The uncertainty and variability of renewable energy and their sitting call for strategic and economic plans for expanding the transmission capacities. In this study, we develop a data-driven two-stage stochastic transmission expansion planning with uncertainties. In the proposed approach, purely by learning from the historical data, we first construct a confidence set for the unknown distribution of the uncertain parameters. Then, we develop a two-stage data-driven transmission expansion framework, by considering the worst-case distribution within the constructed confidence set, so as to provide a reliable while economic transmission planning decision. Furthermore, to tackle the model complexity, we propose a decomposition framework embedded with Benders' and Column-and-Constraint generation methods. We implement our approach on 6-bus and 118-bus systems to test its effectiveness. Finally, we show as the amount of historical data grows, the conservativeness of the model decreases.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Optimizing pollinator conservation and crop yield among perennial bioenergy crops

In order to both combat the decline of biodiversity and produce food, fuel, and fiber for a growing human population, current agricultural landscapes must transition into diversified, multifunctional systems. Perennial cellulosic biofuel crops have potential to meet both of these challenges, acting as multifunctional systems that can enhance biodiversity. What is not well understood, and what we test here, are the tradeoffs among different perennial crops in their performance as biofuels and in biodiversity conservation. Working in an established bioenergy experiment with four native, perennial, cellulosic biofuel crop varieties - ranging from monoculture to diverse restoration planting - we tested the effect of biofuel crop management on flower communities, pollinator communities, and crop yield. The greatest abundance and diversity of pollinators and flowers were in treatments that were successional (unmanaged), followed by restored prairie (seeded mix of native grasses and forbs), switchgrass, and a mix of native grasses. However, biofuel crop yield was approximately the inverse, with native grasses having the highest yield, followed by switchgrass and prairie, then successional treatments. Restored prairie was the optimal biofuel crop when both pollinator conservation and crop yield are valued similarly. We add to mounting evidence that policy is needed to create sustainable markets that value the multifunctionality of perennial biofuel systems in order to achieve greater ecosystem services from agricultural landscapes.

09 BIOMASS FUELS↗

Ab initio Modeling of the Electronic Structures and Physical Properties of a‐Si 1− x Ge x O 2 Glass ( x = 0 to 1)

The amorphous silica (a‐SiO 2 ) and germania (a‐GeO 2 ) have a wide range of applications in glass industry. Based on a previously constructed near‐perfect continuous random network model with 1296 atoms and periodic boundary conditions, we extend our study to amorphous Si 1− x G e x O 2 models of homogeneous random substitution of Si by Ge with x ranging from 0 to 1. We have calculated the structural, electronic, mechanical, and optical properties for the series by using the first‐principles density functional theory methods. The x ‐dependence of the variations in the properties is analyzed and critically compared with available experimental data. The mass density, volume, total bond order density, bulk mechanical properties, and refractive index are found to vary linearly as a function of x . For x = 0.5, we have also constructed six different kinds of particle immersion models to test the effect of inclusion of spherical particles of one glass of different sizes in the medium of the other glass on their physical properties. It is shown that particle sizes do affect the properties of particle immersion. Our calculations provide deep insight on the properties of mixture and nanocomposites of a‐SiO 2 and a‐GeO 2 glasses.

Baral, Khagendra↗

Calculation of Friction Factors and Nusselt Numbers for Twisted Elliptical Tube Heat Exchangers Using Nek5000

Twisted elliptical tube geometries for heat exchanger design are expected to offer significant enhancement in heat transfer with a marginal increase in frictional losses. The presented work focuses on computational fluid dynamics (CFD) simulations of heated molten salt flows through twisted elliptical tube geometries at low modified Froude numbers. In this work, the objectives are to evaluate the available correlations at low Froude numbers and to determine the impact of using a small gap to resolve contact points. The spectral element CFD code Nek5000 was used for all simulations, which were performed in periodic domains of triangular and square unit cells surrounding a single tube through a complete twist using an explicit filtering large eddy simulation (LES) method. The simulation methodology was validated by comparing to the experimental data of Tan et al. Excellent agreement was observed for this comparison. The Dzyubenko correlation for transitional flow was evaluated for a range of Froude numbers. This correlation demonstrated good agreement with LES results at high modified Froude number. As Froude number was decreased toward the bounds of the correlation, the agreement worsened. Cases were then simulated at low Froude number, testing the effects of tube spacing. It was determined that the laminar case for the square unit cell is the most affected by increasing gap size, which should be minimized to mitigate the effect. In the triangular unit cell, the laminar flow regime is also more significantly impacted by increasing gap size compared to the turbulent flow regime which was only marginally impacted.

42 ENGINEERING↗

REGULATORY TESTING AND POSTTEST ANALYSIS OF THE DPP-3 TYPE B SHIPPING CONTAINER FOR NCT AND HAC TESTS

The safe transportation of radioactive material using appropriately designed and certified transportation packages is important to protect the public and environment. Therefore, a comprehensive and rigorous system of packaging requirements are required. The purpose of this test protocol is to determine the effects of drop testing on package performance in a Type B shipping package (DPP-3). Required physical tests for the DPP-3 package include normal conditions of transport and hypothetical accident conditions test requirements. The preparation, regulatory testing, and post-test evaluation of a Type B shipping package tested to the 10 CFR 71.71 and 10 CFR 71.73 requirements will be presented. Six packages were tested and the responses when subjected to the HAC sequence of free drop, puncture, and thermal tests according to 10 CFR 71.73 were measured. The posttest helium leak test showed a leak rate less than 1 × 10-7 He-cc/sec which means that the containment boundary was maintained after the regulatory testing, therefore maintaining a leak tight environment. To determine the amount of change in the package performance measurements, statistical analyses were conducted using SPSS version 26. The null hypothesis of the testing was that there would not be a change in the measurements from pre to post-testing large enough to find statistical significance. Therefore, a finding of statistical significance indicated too much variability in the package design and was deemed an unfavorable finding. A repeated measures t-test was used to analyze the drum lids and CV torques. A one-way ANOVA was used to analyze height and diameter packages. Results of the repeated measures t-test indicated that all six containment vessel lid torques were statistically significant. However only three out of the six drum lid torques were statistically significant. Therefore, design of the lids caused more variability than necessary when subjected to the following drop tests: 1.) horizontal and cold; 2.) vertical lid down; and 3.) corner with lid up. Results of the one-way ANOVA analysis on height indicated that four out of the six CTUs were statistically significant. Thus, design of the CTUs caused more variability then necessary when subjected to the following drop tests: 1.) horizontal hot; 2.) horizontal cold; 3.) corner lid up; and 4.) corner lid down. Results of the one-way ANOVA analysis on diameter indicated that all six CTUs were statistically significant. Thus, design of the CTUs caused more variability then necessary when subjected to all of the tests. The DPP-3 design has been shown to be an acceptable design for the transport of radioactive materials. However, results of the statistical analysis reveal a possible improvement in package and test design to reduce variability in package performance measurement before and after testing.

Martinez, Oscar↗

MO-C-17A-04: Forecasting Longitudinal Changes in Oropharyngeal Tumor Morphology Throughout the Course of Head and Neck Radiation Therapy

Purpose: To generate, evaluate, and compare models that predict longitudinal changes in tumor morphology throughout the course of radiation therapy. Methods: Two morphology feature vectors were used to describe the size, shape, and position of 35 oropharyngeal GTVs at each treatment fraction during intensity-modulated radiation therapy. The feature vectors comprised the coordinates of the GTV centroids and one of two shape descriptors. One shape descriptor was based on radial distances between the GTV centroid and 614 GTV surface landmarks. The other was based on a spherical harmonic decomposition of these distances. Feature vectors over the course of therapy were described using static, linear, and mean models. The error of these models in forecasting GTV morphology was evaluated with leave-one-out cross-validation, and their accuracy was compared using Wilcoxon signed-rank tests. The effect of adjusting model parameters at 1, 2, 3, or 5 time points (adjustment points) was also evaluated. Results: The addition of a single adjustment point to the static model decreased the median error in forecasting the position of GTV surface landmarks by 1.2 mm (p<0.001). Additional adjustment points further decreased forecast error by about 0.4 mm each. The linear model decreased forecast error compared to the static model for feature vectors based on both shape descriptors (0.2 mm), while the mean model did so only for those based on the inter-landmark distances (0.2 mm). The decrease in forecast error due to adding adjustment points was greater than that due to model selection. Both effects diminished with subsequent adjustment points. Conclusion: Models of tumor morphology that include information from prior patients and/or prior treatment fractions are able to predict the tumor surface at each treatment fraction during radiation therapy. The predicted tumor morphology can be compared with patient anatomy or dose distributions, opening the possibility of anticipatory re-planning. American Legion Auxiliary Fellowship; The University of Texas Graduate School of Biomedical Sciences at Houston.

60 APPLIED LIFE SCIENCES↗

A nanocomposite of Au-AgI core/shell dimer as a dual-modality contrast agent for x-ray computed tomography and photoacoustic imaging

Purpose: To develop a core/shell nanodimer of gold (core) and silver iodine (shell) as a dual-modal contrast-enhancing agent for biomarker targeted x-ray computed tomography (CT) and photoacoustic imaging (PAI) applications. Methods: The gold and silver iodine core/shell nanodimer (Au/AgICSD) was prepared by fusing together components of gold, silver, and iodine. The physicochemical properties of Au/AgICSD were then characterized using different optical and imaging techniques (e.g., HR- transmission electron microscope, scanning transmission electron microscope, x-ray photoelectron spectroscopy, energy-dispersive x-ray spectroscopy, Z-potential, and UV-vis). The CT and PAI contrast-enhancing effects were tested and then compared with a clinically used CT contrast agent and Au nanoparticles. To confer biocompatibility and the capability for efficient biomarker targeting, the surface of the Au/AgICSD nanodimer was modified with the amphiphilic diblock polymer and then functionalized with transferrin for targeting transferrin receptor that is overexpressed in various cancer cells. Cytotoxicity of the prepared Au/AgICSD nanodimer was also tested with both normal and cancer cell lines. Results: The characterizations of prepared Au/AgI core/shell nanostructure confirmed the formation of Au/AgICSD nanodimers. Au/AgICSD nanodimer is stable in physiological conditions for in vivo applications. Au/AgICSD nanodimer exhibited higher contrast enhancement in both CT and PAI for dual-modality imaging. Moreover, transferrin functionalized Au/AgICSD nanodimer showed specific binding to the tumor cells that have a high level of expression of the transferrin receptor. Conclusions: The developed Au/AgICSD nanodimer can be used as a potential biomarker targeted dual-modal contrast agent for both or combined CT and PAI molecular imaging.

61 RADIATION PROTECTION AND DOSIMETRY↗

SU-G-TeP4-07: Automatic EPID-Based 2D Measurement of MLC Leaf Offset as a Quality Control Tool

Purpose: The MLC dosimetric leaf gap (DLG) and transmission are measured parameters which impact the dosimetric accuracy of IMRT and VMAT plans. This investigation aims to develop an efficient and accurate routine constancy check of the physical DLG in two dimensions. Methods: The manufacturer’s recommended DLG measurement method was modified by using 5 fields instead of 11 and by utilizing the Electronic Portal Imaging Device (EPID). Validations were accomplished using an ion chamber (IC) in solid water and a 2D IC array. EPID data was collected for 6 months on multiple TrueBeam linacs using both Millennium and HD MLCs at 5 different clinics in an international consortium. Matlab code was written to automatically analyze the images and calculate the 2D results. Sensitivity was investigated by introducing deliberate leaf position errors. MLC calibration and initialization history was recorded to allow quantification of their impact. Results were analyzed using statistical process control (SPC). Results: The EPID method took approximately 5 minutes. Due to detector response, the EPID measured DLG and transmission differed from the IC values but were reproducible and consistent with changes measured using the ICs. For the Millennium MLC, the EPID measured DLG and transmission were both consistently lower than IC results. The EPID method was implemented as leaf offset and transmission constancy tests (LOC and TC). Based on 6 months of measurements, the initial leaf-specific action thresholds for changes from baseline were set to 0.1 mm. Upper and lower control limits for variation were developed for each machine. Conclusion: Leaf offset and transmission constancy tests were implemented on Varian HD and Millennium MLCs using an EPID and found to be efficient and accurate. The test is effective for monitoring MLC performance using dynamic delivery and performing process control on the DLG in 2D, thus enhancing dosimetric accuracy. This work was supported by a grant from Varian Medical Systems.

61 RADIATION PROTECTION AND DOSIMETRY↗

Ferredoxin:NAD + oxidoreductase of Thermoanaerobacterium saccharolyticum and its role in ethanol formation [Identification of a ferredoxin:NAD + oxidoreductase of Thermoanaerobacterium saccharolyticum and its role in ethanol formation]

Ferredoxin:NAD + oxidoreductase (NADH-FNOR) catalyzes the transfer of electrons from reduced ferredoxin to NAD + . This enzyme has been hypothesized to be the main enzyme responsible for ferredoxin oxidization in the NADH-based ethanol pathway in Thermoanaerobacterium saccharolyticum ; however, the corresponding gene has not yet been identified. Here, we identified the Tsac_1705 protein as a candidate FNOR based on the homology of its functional domains. We then confirmed its activity in vitro with a ferredoxin-based FNOR assay. To determine its role in metabolism, the tsac_1705 gene was deleted in different strains of T. saccharolyticum. In wild-type T. saccharolyticum , deletion of tsac_1705 resulted in a 75% loss of NADH-FNOR activity, which indicated that Tsac_1705 is the main NADH-FNOR in T. saccharolyticum . When both NADH- and NADPH-linked FNOR genes were deleted, the ethanol titer decreased and the ratio of ethanol to acetate approached unity, indicative of the absence of FNOR activity. As a result, we tested the effect of heterologous expression of Tsac_1705 in Clostridium thermocellum and found improvements in both the titer and the yield of ethanol.

09 BIOMASS FUELS↗

Environmental matrix and moisture influence soil microbial phenotypes in a simplified porous media incubation

Soil moisture and porosity regulate microbial metabolism by influencing factors, such as system chemistry, substrate availability, and soil connectivity. However, accurately representing the soil environment and establishing a tractable microbial community that limits confounding variables is difficult. Here, we use a reduced-complexity microbial consortium grown in a glass bead porous media amended with chitin to test the effects of moisture and a structural matrix on microbial phenotypes. Leveraging metagenomes, metatranscriptomes, metaproteomes, and metabolomes, we saw that our porous media system significantly altered microbial phenotypes compared with the liquid incubations, denoting the importance of incorporating pores and surfaces for understanding microbial phenotypes in soils. These phenotypic shifts were mainly driven by differences in expression of Streptomyces and Ensifer, which included a significant decrease in overall chitin degradation between porous media and liquid. Our findings suggest that the success of Ensifer in porous media is likely related to its ability to repurpose carbon via the glyoxylate shunt amidst a lack of chitin degradation byproducts while potentially using polyhydroxyalkanoate granules as a C source. We also identified traits expressed by Ensifer and others, including motility, stress resistance, and carbon conservation, that likely influence the metabolic profiles observed across treatments. Together, these results demonstrate that porous media incubations promote structure-induced microbial phenotypes and are likely a better proxy for soil conditions than liquid culture systems. Furthermore, they emphasize that microbial phenotypes encompass not only the multi-enzyme pathways involved in metabolism but also include the complex interactions with the environment and other community members.

54 ENVIRONMENTAL SCIENCES↗

Molecular-dynamics simulation of the heat capacity for nickel and copper clusters: Shape and size effects

We have investigated the heat capacity of ideal Cu and Ni fcc clusters with diameters from 2 to 6 nm in the temperature range 200-800 K by the molecular-dynamics method using a modified tight-binding potential. Our analysis has shown consistency with the experimental results at temperatures of 200-300 K. The data obtained are also indicative of several regularities that are in agreement with the analytical calculations. We have concluded from the results of our computer simulations that the heat capacity in the case of isolated free clusters can exceed that of a bulk material, with this difference decreasing as the nanoparticle grows proportionally to the reduction in the fraction of surface atoms. The excess of the heat capacity for ideal copper and nickel nanoclusters with D = 6 nm at T = 200 K has been found to be 10% and 13%, respectively. Consequently, the large heat capacities of copper and nickel nanostructures observed in some real experiments cannot be related to the characteristics of free clusters. We hypothesize that these properties of a nanomaterial depend on the degree of agglomeration of its constituent particles, i.e., the surfaces and interphase boundaries of interconnected nanoclusters can have a strong effect. To test this hypothesis, we took nickel and copper clusters of various sizes (4000-7200 atoms) produced through the simulation of condensation from the gas phase. At high temperatures, we failed to adequately assess the role of the interphase boundaries in calculating the heat capacity of nanoparticles. The reason was the mass diffusion of Ni or Cu atoms to impart an energetically more favorable shape and structure to the synthesized clusters. At low temperatures, the heat capacity of such clusters exceeded that of clusters with an ideal shape and structure by a value from 3.2% to 10.6%. We have concluded that the Ni and Cu clusters produced in real experiments cannot be applied in devices using the thermal energy of such clusters without a preliminary optimization stage, because their external shape and interior structure are nonideal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗