Search NASA⌕ Search

SEARCH · Search NASA

Results for “AFM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Modified chemical synthesis of porous α-Sm{sub 2}S{sub 3} thin films

Highlights: • A novel chemical route to prepare α-Sm{sub 2}S{sub 3} thin films. • A porous honeycomb like morphology of the α-Sm{sub 2}S{sub 3} thin film. • An application of α-Sm{sub 2}S{sub 3} thin film toward its supercapacitive behaviour. - Abstract: The paper reports synthesis of porous α-Sm{sub 2}S{sub 3} thin films using modified chemical synthesis, also known as successive ionic layer adsorption and reaction (SILAR) method. The X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), wettability and ultraviolet–visible spectroscopy (UV–vis) techniques are used for the study of structural, elemental, morphological and optical properties of α-Sm{sub 2}S{sub 3} films. An orthorhombic crystal structure of α-Sm{sub 2}S{sub 3} is resulted from XRD study. The SEM and AFM observations showed highly porous α-Sm{sub 2}S{sub 3} film surface. An optical band gap of 2.50 eV is estimated from optical absorption spectrum. The porous α-Sm{sub 2}S{sub 3} thin film tuned for supercapacitive behaviour using cyclic voltammetry and galvanostatic charge discharge showed a specific capacitance and energy density of 294 Fg{sup –1} and 48.9 kW kg{sup –1}, respectively in 1 M LiClO{sub 4}–propylene carbonate electrolyte.

36 MATERIALS SCIENCE↗

Enhanced piezoelectric output voltage and Ohmic behavior in Cr-doped ZnO nanorods

Highlights: • Low cost highly crystalline Cr-doped ZnO nanorods were synthesized. • Enhancement in dielectric, piezoelectric and ferroelectric properties were observed. • A high output voltage was obtained in AFM. • Cr-doping resulted in enhanced conductivity and better Ohmic behavior in ZnO/Ag contact. - Abstract: Highly crystalline Cr-doped ZnO nanorods (NRs) were synthesized by solution technique. The size distribution was analyzed by high resolution tunneling electron microscope (HRTEM) and particle size analyzer. In atomic force microscope (AFM) studies, peak to peak 8 mV output voltage was obtained on the application of constant normal force of 25 nN. It showed high dielectric constant (980) with phase transition at 69 °C. Polarization vs. electric field (P–E) loops with remnant polarization (6.18 μC/cm{sup 2}) and coercive field (0.96 kV/cm) were obtained. In I–V studies, Cr-doping was found to reduce the rectifying behavior in the Ag/ZnO Schottky contact which is useful for field effect transistor (FET) and solar cell applications. With these excellent properties, Cr-doped ZnO NRs can be used in nanopiezoelectronics, charge storage and ferroelectric applications.

36 MATERIALS SCIENCE↗

Correlating melting and collapse of charge ordering with magnetic transitions in La{sub 0.5-x}Pr{sub x}Ca{sub 0.5}MnO{sub 3}

Highlights: • Concept of normalized magnetization is introduced to explain relative magnetic transitions. • Coexistence of two magnetic modes is correlated with the magnetic transitions and MIT. • Field induced melting and collapse of charge ordered antiferromagnetic (CO-AFM) state into ferromagnetic (FM) state is conferred. - Abstract: The magnetic properties of polycrystalline La{sub 0.5-x}Pr{sub x}Ca{sub 0.5}MnO{sub 3} material are investigated at different temperatures. The existence of magnetically diverse phases associated with various relaxation modes and their modulation with temperature and doping is analyzed. La{sub 0.5}Ca{sub 0.5}MnO{sub 3} exhibited field induced melting and collapse of charge ordered antiferromagnetic (CO-AFM) phase into ferromagnetic (FM) state. This phenomenon results in lowering of Neel’s temperature (T{sub N}) along with changes in the slope of magnetic moment with temperature. Using normalized M(T) curves, the variation and interplay of charge ordered temperature (T{sub CO}), Curie temperature (T{sub C}) and T{sub N} is conferred. The coexistence of two magnetic modes is explained as major ingredient for the magnetic transitions as well as metal to insulator transition (MIT); where melting and collapse of charge ordering is conversed as basic feature in these Praseodymium (Pr) doped La{sub 0.5}Ca{sub 0.5}MnO{sub 3} materials.

36 MATERIALS SCIENCE↗

Influence of Fluorine incorporation on the photocatalytic activity of Tin Oxide thin films

Highlights: • Fluorine doped SnO{sub 2} thin films prepared by a facile homemade jet nebulizer spray pyrolysis technique. • XRD, XPS, PL, FESEM, AFM studies support the discussions. • The photocatalytic activities of the prepared tin oxide (TO) and FTO thin films for the degradation of MB aqueous solution were tested. . - Abstract: This work reports the photocatalytic activity of undoped tin oxide (TO) and F doped tin oxide (FTO) thin films for MB dye degradation under visible light irradiation. A facile homemade jet nebulizer spray pyrolysis technique was employed to prepare these samples. The results indicate that FTO film exhibits superior photocatalytic activity compared to TO film. Dye degradation of nearly 95% is achieved using FTO film at 90 min whereas TO film degrades only 78% of dye molecules in the same time interval. This enhancement for FTO films might be due to the generation of large number of free electrons caused by the fluorine incorporation. The mechanism behind the enhancement of photocatalytic activity of FTO films is discussed elaborately with the aid of optical and PL studies. The structure, composition and morphology of the samples were analyzed using XRD, XPS, FTIR, FESEM and AFM. The incorporation of F into SnO{sub 2} lattice is confirmed through FTIR analysis.

36 MATERIALS SCIENCE↗

Hybrid polymer films based ZnS nanocomposites and its optical and morphological properties: Monitoring the role of the binding-site interaction

Highlights: • ZnS NPs were formed with adequate quantum confinement, leading to a blue shift. • The hybrid polymer films exhibited different optical behavior, which was attributed to the greater size of NPs. • The emission bands for the hybrid polymer films exhibited slight blue-shifts. • A slightly quenched emission band was observed after varying the length of the hydrophilic block. • AFM images also show changes in morphology, which may be attributed mainly to the hydrophilic domain. - Abstract: A series of hybrid polymer films were prepared using self-assembly block copolymers as nanoreactor of ZnS nanoparticles (NPs). The self-assembled poly(acrylic acid)-block-poly(N-phenylmaleimide) was prepared by Atom-Transfer Radical Polymerization (ATRP) in different block composition. Subsequently the fluorescent NPs were synthesized into the polymer matrices in order to modify its optical and thermal properties and to analyze its effect on the morphology properties (roughness and porosity). As results, significant effects on the properties of the hybrid materials were obtained under different percentages of the NPs. These materials exhibited blue- or red-shift emission bands depending on the length of hydrophilic domain. Additionally, a quenched emission band is seen, which may also be attributed primarily to the composition of the hydrophilic domain and to the greater percentage of ZnS NPs. The hybrid polymer films showed effects on the porosity and roughness of the surfaces, which was analyzed by AFM and SEM microscopic techniques.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controllable nanoporous fibril-like morphology by layer-by- layer self-assembled films of bioelectronics poly(pyrrole-co-formyl pyrrole)/polystyrene sulfonate for biocompatible electrode

Highlights: • Controllable highly degree of nano porous/fibril-like network of P (Py-co-FPy) morphology on top surface film by LBL technique. • Modulation of morphology, charge, conductivity and wettability of film for bioaffinity surface by LBL technique. • Fibril-like structure of P(Py-co-FPy)/PSS layers can influences the BSA and Fgn absorption. • P(Py-co-FPy)/PSS LBL electrode completely reveals non-cytotoxicity. - Abstract: We demonstrate a new class of nanocoating materials for biocompatible electrode based on poly (pyrrole-co-formyl pyrrole) (P(Py-co-Fpy)) multilayered with polystyrene sulfonate (PSS) using layer by layer (LBL) self-assembly technique. By modulating the number layer of deposition, the unique surface properties of P(Py-co-Fpy) are evaluated for bioaffinity. Atomic force microscopy (AFM) demonstrates the controllable morphology of the degree fibril network structure of P(Py-co-Fpy)/PSS surface. The direct adsorption of bovine serum albumin (BSA) onto the top surface of P(Py-co-Fpy)/PSS film by AFM analysis reveals the forming of BSA multilayer at high degree of fibril structure P(Py-co-Fpy). In addition, the adsorbed fibrinogen (Fgn) reveals the reversible conformation change on surface of P(Py-co-Fpy)/PSS. The effect of P(Py-co-Fpy)/PSS morphology on primary mouse embryonic fibroblasts (MEF) is investigated. Cell morphology and proliferation on P(Py-co-Fpy)/PSS LBL film at different number of layer deposition are evaluated, demonstrating that P(Py-co-Fpy)/PSS LBL nanocoating surface is non-cytotoxic as morphology-dependent.

60 APPLIED LIFE SCIENCES↗

Study of magneto-optical characteristics of cerium incorporated yttrium iron garnet films

Highlights: • Ce:YIG films deposited by sol–gel method. • XRD results shows crystallite size of films decreases by Ce concentrations. • Morphological studies indicate of smooth and connected surface for all films. • Ce ions increased Faraday rotation of YIG films. - Abstract: In the current study, yttrium iron garnet films incorporated with cerium with the general formula of Ce{sub x}Y{sub 3-x}Fe{sub 5}O{sub 12} and values of (x = 0, 0.1, 0.3, 0.5, 0.7) were prepared through sol–gel method using spin coating technique and heating treatment on quartz substrates. Prepared samples were studied to check physical characteristics. X-ray diffraction analysis (XRD), scanning electron microscope (SEM), atomic force microscope (AFM) and vibrating sample magnetometer (VSM) were applied to study the impact of Ce impurities on the structural characteristic, surface morphology of films and magnetic properties, respectively. Faraday rotation values of samples were measured at the wavelength of 632 nm. The image of the atomic force microscope (AFM) of the prepared samples shows that the films have a continuous and smooth surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Ho-ion substitution on the magnetic properties of the Ca3Co2O6 frustrated spin-chain compound

Highlights: • A great sensitivity of the Ca{sub 3}Co{sub 2}O{sub 6} magnetic behavior to the presence of magnetic foreign cation are emphasized. • As the Ho content increases the ferrimagnetic configuration becomes less stable; and the antiferromagnetic (AFM) interaction enhances gradually. • Antiferromagnetic coupling interaction between Ho{sup 3+} ions are interpreted, The complex micro-mechanism are discussed in detail. - Abstract: Ho{sup 3+}-ion doped spin-chain compounds Ca{sub 3}Co{sub 2-x}Ho{sub x}O{sub 6} (x = 0, 0.05, 0.1, 0.15) were prepared by a conventional solid-state reaction method. Rietveld refinement of the X-ray diffraction patterns at room temperature confirmed the rhombohedral structure with the R 3-bar c space group. The results reveal that the solid solubility of the Ho element in Ca{sub 3}Co{sub 2}O{sub 6} is in the range of x = 0.1–0.15. Magnetic measurement suggests that with the increased Ho content: (1) the ferromagnetic transition temperature Tc and spin freezing temperature T{sub ƒ} decrease obviously; (2) the ferrimagnetic configuration becomes less stable; (3) the dynamic characteristics become slower; and (4) the antiferromagnetic (AFM) interaction enhances gradually. Based on these phenomena, the mechanism was discussed in detail. The magnetic correlation length is broken at a low Ho{sup 3+}-ion level, and the Ho{sup 3+}-ion pair formation along the chain with a high level of doping was interpreted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Research of sensing characteristic and dynamic measurement of graphene oxides modified flexible arrayed RuO2 chlorine ion sensor

Highlights: • Sensitivity of the flexible arrayed RuO2/GO chlorine ion sensor was improved with optimal GO concentration, which could increase the reaction area between the chlorine ion and chlorine sensing membrane. • The electrochemical impedance spectroscopy (EIS) and atomic force microscope (AFM) were utilized to explain the relationships among the electron transfer resistance, GO modified amount and sensitivity. • The 30 μL/min flow rate of dynamic measurement for flexible arrayed RuO2/0.010 wt% GO chlorine ion sensor was obtained the best sensitivity and linearity 66.673 mV/pCl and 0.998, respectively. - Abstract: In this study, we used the graphene oxide (GO) solution, in which the concentration was from 0.005 wt% to 0.500 wt%, to modify the flexible arrayed ruthenium dioxide (RuO{sub 2}) chlorine ion sensor. It is found that the flexible arrayed RuO{sub 2}/0.010 wt% GO chlorine ion sensor had the best sensitivity (44.445 mV/pCl) and the linearity was 0.971. The electrochemical impedance spectroscopy (EIS) and atomic force microscope (AFM) were utilized to explain the relationships among the electron transfer resistance, GO modified amount and sensitivity. After that, we used the flexible arrayed RuO{sub 2}/0.010 wt% GO chlorine ion sensor and the microfluidic measurement system to investigate the dynamic sensing characteristics with different flow rates from 5 μL/min to 40 μL/min. According to the experimental results, the best sensitivity and linearity of flexible arrayed RuO{sub 2}/0.010 wt% GO chlorine ion sensor were 66.673 mV/pCl and 0.992 at 30 μL/min.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atmospheric pressure plasma - $\mathrm{ARGET}$ $\mathrm{ATRP}$ modification of poly(ether sulfone) membranes: A combination attack

We report a novel surface modification technique for grafting alkyl methacrylate monomers from commercial poly(ether sulfone) (PES) nanofiltration membranes is developed through a combination of helium and oxygen atmospheric pressure plasma treatment followed by Activators Regenerated by Electron Transfer (ARGET) Atom Transfer Radical Polymerization (ATRP). The resulting membrane surfaces show degree of grafting increases of 28%, 94%, and 270% for methyl methacrylate (C1), hexyl methacrylate (C6), and stearyl methacrylate (C18), respectively, when characterized with Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy. Scanning Electron Microscopy and Atomic Force Microscopy (AFM) show a rippled, fibrous morphology for the PES membranes grafted with C18 and reinforced through molecular dynamics simulations. AFM of the PES membranes grafted with C18 show an increase of ~ 23% in root-mean square (RMS) roughness as well as 4x higher adhesion force when probed with a hydrophobic gold cantilever tip when compared with the unmodified PES membranes, confirming a successful surface grafting reaction and increase in surface hydrophobicity, respectively. This technique allows enhanced synthesis of polymer grafted membranes using relatively green reaction solvent and enables “structure-by-design” surface morphology control with future applications in membrane separation processes such as organic solvent nanofiltration, gas separations, and desalination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the metal/ZnO contacts in a sliding-bending piezoelectric nanogenerator

We carry out molecular dynamics (MD) simulations and analyze the piezoelectric and mechanical properties of a ZnO nanowire (NW) under mechanical bending in a sliding-bending piezoelectric nanogenerator. The computational model contains a vertically aligned ZnO NW along the [0001] direction and a Pt (111) metal tip. MD simulations are performed to mimic the interfacial sliding dynamics of an atomic force microscope (AFM) metal tip sliding over a ZnO NW. Ionic charges for Zn and O in the ZnO NW are used to calculate the piezoelectric potential distributions in a grid-point matrix. Simulation results reveal the very detailed distributions of the piezoelectric potential within the ZnO NW, which are different from the continuum field theory predictions. The very similar variations of the lateral friction and contact forces versus the sliding distance of the AFM metal tip over the ZnO NW during repeated forward-backward sliding suggest that the metal/ZnO contact is robust. Moreover, the substantial contact area at the metal/ZnO interface suggests that a Schottky contact should be established at the interface, which needs further investigations.

Chemistry↗

Mesoscale-architecture-based crack evolution dictating cycling stability of advanced lithium ion batteries

The cracking phenomenon of Ni-rich NMC (LiNixMnyCo1-x-yO2, x = 0.6) secondary particles is frequently discovered and believed to be one of critical reasons deteriorating the long-term cycling stability of NMC cathode in lithium ion batteries (LIBs). However, the initiation and evolution of those cracks is still controversial due to the limited quantification especially by in situ monitoring, leading to the challenge of identifying an efficient approach to inhibit the formation of the fractures during repeated cycling. Herein, the irreversible, anisotropic cycling lattice and mesoscale expansion/shrinkage of nano-grain during the first cycle, as revealed by in situ X-ray diffraction (XRD) and in situ atomic force microscopy (AFM), have been quantified and confirmed to be the dominant driving forces of microcracks initiation at the grain boundaries. These microcracks preferentially nucleates at the core region with random oriented nano-grains in early stage. The further growth and aggregation of microcracks into macrocrack eventually results in microfracture propagation radially outward to the periphery region with more uniform nano-grain orientation. This mesoscale nano-grain architecture controlled cracking process highlight the importance of predictive synthesis of cathode materials with controllable multiscale crystalline architecture for high-performance LIBs.

25 ENERGY STORAGE↗

Neutron scattering study of spin density wave and weak ferromagnetic orders in Tb 0.47 Y 0.53 Ni 2 11 B 2 C

In this work, microscopic coexistence between weak ferromagnetism (WFM) and superconductivity (SC) in Tb 0.47 Y 0.53 Ni 2 11 B 2 C was investigated. Magnetization measurements indicate that antiferromagnetic (AFM), WFM and SC transitions occur in this material. Unpolarized neutron diffraction experiments revealed that the AFM order is best described by a longitudinal spin density wave with a propagation vector of q = 0.550a*. Polarized neutron diffraction experiments further confirmed that the WFM order is originated in Tb 0.47 Y 0.53 Ni 2 11 B 2 C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal transitions in semi-crystalline polymer thin films studied via spectral reflectance

Herein we report the finding that spectral reflectance (SR) can be used to identify thermal transitions in semi-crystalline polymer thin films. By studying film thickness as a function of temperature, we found that semi-crystalline polymers exhibit characteristic expansion and contraction profiles during the melting (T m ) and crystallization (T c ) transitions, respectively. Prior to this discovery, studies on the crystalline T m in thin films have involved more expensive and complex techniques such as atomic force microscopy (AFM), ellipsometry, and grazing-incidence wide-angle X-ray scattering (GIWAXS). We correlate T m and T c as measured by SR with differential scanning calorimetry (DSC) in the bulk and temperature-controlled GIWAXS or AFM in thin films. We show that SR is accurate for measuring changes in films with thicknesses of 500 nm down to 21 nm and for detecting melting point depression due to thin film confinement. Furthermore, we demonstrate that SR is a powerful tool for measuring thermal transitions in semi-crystalline polymer films with single-degree resolution.

36 MATERIALS SCIENCE↗

Structural properties of aqueous grown polydopamine thin films determined by neutron reflectometry

Here, in this work, neutron reflectometry (NR) studies of the bio-mimetic polymer, polydopamine (PDA), deposited from differing initial concentrations of precursor material dopamine hydrochloride for a range of polymerization times, is reported. PDA can form a complex and highly versatile polymer film, with many structure studies having been performed previously, but a comprehensive structural determination of PDA by NR is lacking in the literature. It was found that simple box models were incapable of fully explaining the observed data, necessitating the use of a composite model consisting of the weighted average of both the 1 and 2 box models to fully capture the heterogeneous nature of the PDA film structure. Confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM) were performed to capture the surface structure and relative mechanical difference between the separate domains of the PDA. The CLSM results provide evidence that the PDA domains are larger than the coherent scattering length of a neutron used in these measurements, 10μm, supporting the need for a composite model. The AFM measurements show complex structure below the coherence length provide physical justification for the two box model. It was determined that film structure and quality are both heavily impacted by the initial concentration of dopamine hydrochloride and the polymerization time, giving confidence to the highly customizable nature of PDA as an adhesion promoting interface treatment in composite systems, such as plastic bonded explosives (PBX).

36 MATERIALS SCIENCE↗

Characterization of Polyamide Thin Films by Atomic Force Microscopy

This study directly compares the mechanical behavior of novel molecular layer deposition (MLD) and analogous interfacial polymerization (IP) polyamide thin films in environments relevant to reverse osmosis (RO) membrane operation. The elastic modulus of the films was determined using atomic force microscopy (AFM) in dry, hydrated, and chlorinated states. Surface roughness characteristics were also obtained given their potential influence on AFM modulus measurements. The much smoother MLD films demonstrated a statistically higher modulus in all states as compared to their IP counterparts. The MLD films maintained a modulus ~3X and ~5X greater than that of IP films after hydration and chlorination, respectively. Such differences in behavior may be due to the higher density and correspondingly lower void content of the MLD films. Results from this study provide a rationale for future development of MLD for fabrication of polyamide films for incorporation in RO membranes.

atomic force microscopy↗

Development of in-situ high-voltage and high-temperature stressing capability on atomic force microscopy platform

Reliability has become an increasingly important issue as photovoltaic technologies mature. However, researching reliability at the nanometer scale is in its infancy; in particular, in-situ studies have not been reported to date. Here, to investigate potential-induced degradation (PID) of solar cell modules, we have developed an in-situ stressing capability with applied high voltage (HV) and high temperature (HT) on an atomic force microscopy (AFM) platform. We designed a sample holder to simultaneously accommodate 1000-V HV and 200 degrees C HT stressing. Three technical challenges have been overcome along with the development: thermal drift at HT, HV interference with measurement, and arc discharge caused by HV. We demonstrated no observable measurement artifact under the stress conditions. Based on our in-situ stressing AFM, Kelvin probe force microscopy potential imaging revealed the evolution of electrical potential across the junction along with the PID stressing time, which provides vital information to further study the PID mechanism.

14 SOLAR ENERGY↗