Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMPLITUDE MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Ultrafast optical control of terahertz surface plasmons in subwavelength hole-arrays at room temperature

Extraordinary optical transmission through subwavelength metallic hole-arrays has been an active research area since its first demonstration. The frequency selective resonance properties of subwavelength metallic hole arrays, generally known as surface plasmon polaritons, have potential use in functional plasmonic devices such as filters, modulators, switches, etc. Such plasmonic devices are also very promising for future terahertz applications. Ultrafast switching or modulation of the resonant behavior of the 2-D metallic arrays in terahertz frequencies is of particular interest for high speed communication and sensing applications. In this paper, we demonstrate optical control of surface plasmon enhanced resonant terahertz transmission in two-dimensional subwavelength metallic hole arrays fabricated on gallium arsenide based substrates. Optically pumping the arrays creates a conductive layer in the substrate reducing the terahertz transmission amplitude of both the resonant mode and the direct transmission. Under low optical fluence, the terahertz transmission is more greatly affected by resonance damping than by propagation loss in the substrate. An ErAs:GaAs nanoisland superlattice substrate is shown to allow ultrafast control with a switching recovery time of {approx}10 ps. We also present resonant terahertz transmission in a hybrid plasmonic film comprised of an integrated array of subwavelength metallic islands and semiconductor holes. A large dynamic transition between a dipolar localized surface plasmon mode and a surface plasmon resonance near 0.8 THz is observed under near infrared optical excitation. The reversal in transmission amplitude from a stopband to a passband and up to {pi}/2 phase shift achieved in the hybrid plasmonic film make it promising in large dynamic phase modulation, optical changeover switching, and active terahertz plasmonics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Modulation of seismic noise near the San Jacinto fault in southern California: origin and observations of the cyclical time dependence and associated crustal properties

SUMMARY We examine the cyclic amplitude variation of seismic noise recorded by continuous three-component broad-band seismic data with durations spanning 91–713 d (2008–2011) from three different networks: Anza seismic network, IDA network and the transportable seismic array. These stations surround the San Jacinto Fault Zone (SJFZ) in southern California. We find the seismic noise amplitudes exhibit a cyclical variation between 0.3 and 7.2 Hz. The high-frequency (≥0.9 Hz) noise variations can be linked to human activity and are not a concern. Our primary interest is signals in the low frequencies (0.3–0.9 Hz), where the seismic noise is modulated by semi-diurnal tidal mode M2. These long-period (low-frequency) variations of seismic noise can be attributed to a temporal change of the ocean waves breaking at the shoreline, driven by ocean tidal loading. We focus on the M2 variation of seismic noise at f = 0.6 Hz, travelling distances of ∼92 km through the crust from offshore California to the inland Anza, California, region. Relative to the shoreline station, data from the inland stations show a phase lag of ∼ –12°, which we attribute to the cyclic change in M2 that can alter crustal seismic attenuation. We also find that for mode M2 at 0.6 Hz, the amplitude variations of the seismic quality factor (Q) depend on azimuth and varies from 0.22 per cent (southeast to northwest) to 1.28 per cent (northeast to southwest) with Q = 25 for Rayleigh waves. We propose the direction dependence of the Q variation at 0.6 Hz reflects the preferred orientation of subfaults parallel to the main faulting defined by the primarily N45°W strike of the SJFZ.

Geochemistry & Geophysics↗

Amplitude- and frequency-dependent activation of layer II/III neurons by intracortical microstimulation

Intracortical microstimulation (ICMS) has been used for the development of brain machine interfaces. However, further understanding about the spatiotemporal responses of neurons to different electrical stimulation parameters is necessary to inform the design of optimal therapies. In this study, we employed in vivo electrophysiological recording, two-photon calcium imaging, and electric field simulation to evaluate the acute effect of ICMS on layer II/III neurons. Our results show that stimulation frequency non-linearly modulates neuronal responses, whereas the magnitude of responses is linearly correlated to the electric field strength and stimulation amplitude before reaching a steady state. Temporal dynamics of neurons’ responses depends more on stimulation frequency and their distance to the stimulation electrode. In addition, amplitude-dependent post-stimulation suppression was observed within ~500 μm of the stimulation electrode, as evidenced by both calcium imaging and local field potentials. These findings provide insights for selecting stimulation parameters to achieve desirable spatiotemporal specificity of ICMS.

59 BASIC BIOLOGICAL SCIENCES↗

Electrochemical Control of the Ultrafast Lattice Response of a Layered Semimetal

The unique layer-stacking in two-dimensional (2D) van der Waals materials facilitates the formation of nearly degenerate phases of matter and opens novel routes for the design of low-power, reconfigurable functional materials. Electrochemical ion intercalation between stacked layers offers a promising approach to stabilize bulk metastable phases and to explore the effects of extreme carrier doping and strain. However, in situ characterization methods to study the structural evolution and dynamical functional properties of these intercalated materials remains limited. Here a novel experimental platform is presented capable of simultaneously performing electrochemical lithium-ion intercalation and multimodal ultrafast characterization of the lattice using both electron diffraction and nonlinear optical techniques. Using the layered semimetal WTe 2 as a model system, the interlayer shear phonon mode that modulates stacking between 2Dlayers is probed, showing that small amounts of lithiation enhance the amplitude and lifetime of the phonon, contrary to expectations. This results from the dynamically fluctuating and anharmonic structure between nearly degenerate phases at room temperature, which can be stabilized by electronic carriers accompanying the inserted lithium ions. At high lithiation, the T d ’ structure emerges and quenches the phonon response. This work defines new approaches for using electrochemistry to engineer the dynamic structure of 2D materials.

36 MATERIALS SCIENCE↗

Application of combined optical signal processing methods to compensate for nonlinear effects in fibre-optic communication links

We report on the use of complex quadrature amplitude signal processing methods based on a combination of static neural networks and special modulation techniques. The conditions are found that allow one to construct the most effective combination of signal processing methods for transmitting signals with considerable power (in the nonlinear regime). Using analytical methods, it is shown how the statistical properties of a signal affect the efficiency of combined processing methods. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

GRAND DESIGN AND FLOCCULENT SPIRALS IN THE SPITZER SURVEY OF STELLAR STRUCTURE IN GALAXIES (S{sup 4}G)

Spiral arm properties of 46 galaxies in the Spitzer Survey of Stellar Structure in Galaxies (S{sup 4}G) were measured at 3.6 {mu}m, where extinction is small and the old stars dominate. The sample includes flocculent, multiple arm, and grand design types with a wide range of Hubble and bar types. We find that most optically flocculent galaxies are also flocculent in the mid-IR because of star formation uncorrelated with stellar density waves, whereas multiple arm and grand design galaxies have underlying stellar waves. Arm-interarm contrasts increase from flocculent to multiple arm to grand design galaxies and with later Hubble types. Structure can be traced further out in the disk than in previous surveys. Some spirals peak at mid-radius while others continuously rise or fall, depending on Hubble and bar type. We find evidence for regular and symmetric modulations of the arm strength in NGC 4321. Bars tend to be long, high amplitude, and flat-profiled in early-type spirals, with arm contrasts that decrease with radius beyond the end of the bar, and they tend to be short, low amplitude, and exponential-profiled in late Hubble types, with arm contrasts that are constant or increase with radius. Longer bars tend to have larger amplitudes and stronger arms.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamic transmission control based on all-dielectric Huygens metasurfaces

Tunable metasurfaces open new doors for achieving dynamic wavefront manipulation in an ultracompact footprint. Dielectric metasurfaces are particularly attractive for this application due to their low-loss modes. However, their volumetric modes make them difficult to dynamically tune compared to plasmonic variants with strong field confinement. We overcome this challenge by combining dielectric resonators with an epsilon-near-zero (ENZ) mode in a thin film. By tuning the coupling between modes in the resonators and the ENZ thin film, active control over the transmittance amplitude is achieved. Operating at the wavelength of the Huygens mode, we demonstrate transmittance modulation with an on-state transmittance of 70% and a modulation depth of 31%. In addition, we create a tunable diffraction grating and demonstrate its potential use in beam steering applications. Finally, this approach provides a new avenue for high-speed and low-power modulation of dielectric metasurfaces.

36 MATERIALS SCIENCE↗

A Suzaku View of Accretion-powered X-Ray Pulsar GX 1+4

We present results obtained from a Suzaku observation of the accretion-powered X-ray pulsar GX 1+4. A broadband continuum spectrum of the pulsar was found to be better described by a simple model consisting of a blackbody component and an exponential cutoff power law than the previously used compTT continuum model. Though the pulse profile had a sharp dip in soft X-rays (<10 keV), phase-resolved spectroscopy confirmed that the dimming was not due to an increase in photoelectric absorption. Phase-sliced spectral analysis showed the presence of a significant spectral modulation beyond 10 keV except for the dip phase. A search for the presence of a cyclotron resonance scattering feature in the Suzaku spectra yielded a negative result. Iron K-shell (K{sub α} and K{sub β}) emission lines from nearly neutral iron ions (<Fe iii) were clearly detected in the source spectrum. A significant K{sub α} emission line from almost neutral Ni atoms was detected for the first time in this source. We estimated an iron abundance of ∼80% of the solar value and an Ni/Fe abundance ratio of about two times the solar value. We searched for an iron Ly{sub α} emission line and found a significant improvement in the spectral fitting by inclusion of this line. We found a clear intensity modulation of the iron K{sub α} line with the pulse phase with an amplitude of 7%. This finding favored an inhomogeneous fluorescent region with a radius much smaller than the size (∼3 × 10{sup 12} cm) estimated by an assumption of homogeneous matter.

79 ASTRONOMY AND ASTROPHYSICS↗

THE PTF ORION PROJECT: A POSSIBLE PLANET TRANSITING A T-TAURI STAR

We report observations of a possible young transiting planet orbiting a previously known weak-lined T-Tauri star in the 7-10 Myr old Orion-OB1a/25-Ori region. The candidate was found as part of the Palomar Transient Factory (PTF) Orion project. It has a photometric transit period of 0.448413 {+-} 0.000040 days, and appears in both 2009 and 2010 PTF data. Follow-up low-precision radial velocity (RV) observations and adaptive optics imaging suggest that the star is not an eclipsing binary, and that it is unlikely that a background source is blended with the target and mimicking the observed transit. RV observations with the Hobby-Eberly and Keck telescopes yield an RV that has the same period as the photometric event, but is offset in phase from the transit center by Almost-Equal-To - 0.22 periods. The amplitude (half range) of the RV variations is 2.4 km s{sup -1} and is comparable with the expected RV amplitude that stellar spots could induce. The RV curve is likely dominated by stellar spot modulation and provides an upper limit to the projected companion mass of M{sub p}sin i{sub orb} {approx}< 4.8 {+-} 1.2 M{sub Jup}; when combined with the orbital inclination, i{sub orb}, of the candidate planet from modeling of the transit light curve, we find an upper limit on the mass of the planetary candidate of M{sub p} {approx}< 5.5 {+-} 1.4 M{sub Jup}. This limit implies that the planet is orbiting close to, if not inside, its Roche limiting orbital radius, so that it may be undergoing active mass loss and evaporation.

79 ASTRONOMY AND ASTROPHYSICS↗

Forward modeling of standing slow modes in flaring coronal loops

Standing slow-mode waves in hot flaring loops are exclusively observed in spectrometers and are used to diagnose the magnetic field strength and temperature of the loop structure. Owing to the lack of spatial information, the longitudinal mode cannot be effectively identified. In this study, we simulate standing slow-mode waves in flaring loops and compare the synthesized line emission properties with Solar Ultraviolet Measurements of Emitted Radiation spectrographic and Solar Dynamics Observatory/Atmospheric Imaging Assembly imaging observations. We find that the emission intensity and line width oscillations are a quarter period out of phase with Doppler shift velocity in both time and spatial domain, which can be used to identify a standing slow-mode wave from spectroscopic observations. However, the longitudinal overtones could only be measured with the assistance of imagers. We find emission intensity asymmetry in the positive and negative modulations; this is because the contribution function pertaining to the atomic emission process responds differently to positive and negative temperature variations. One may detect half periodicity close to the loop apex, where emission intensity modulation is relatively small. The line-of-sight projection affects the observation of Doppler shift significantly. A more accurate estimate of the amplitude of velocity perturbation is obtained by de-projecting the Doppler shift by a factor of 1–2θ/π rather than the traditionally used cosθ. If a loop is heated to the hotter wing, the intensity modulation could be overwhelmed by background emission, while the Doppler shift velocity could still be detected to a certain extent.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluating Ion Accumulation and Storage in Traveling Wave Based Structures for Lossless Ion Manipulations

Structures for lossless ion manipulations (SLIM) technology has demonstrated high resolving power ion mobility separation and flexibility to integrate complex ion manipulations into a single experimental platform. To enable IMS separations, trapping/accumulating ions inside SLIM (or in-SLIM) prior to injection of a packet for separations provides ease of operation and reduces the need for dedicated ion traps external to SLIM. To fully characterize the ion accumulation process, we have evaluated the effect of TW amplitudes, ion collection times, and storage times on the “in-SLIM” accumulation process. The study utilized a SLIM module comprising 5 distinct tracks, each with a specific ion accumulation configuration. The effect of the TW conditions on the accumulation process was investigated for a 3-peptide mixture: kemptide, angiotensin II, and neurotensin at a TW speed of 106 m/s. The effect of ion accumulation time/collection time and storage time was investigated, in addition to TW amplitude. Overall, the signal of the analyte ions increased when the ion collection time increased from 49 to 163 ms but decreased when the ion collection time increased further to 652 ms due to the space charge effects. Ion losses were observed at high TW amplitudes (e.g., 15 V p–p and 20 V p–p ). In addition, under space charge conditions (e.g., collection times of 163 and 652 ms), the signal of the analyte ions decreased with an increase in storage times for all TW amplitudes applied to the trapping region. For ion accumulation, the data indicate that gentler TW conditions must be utilized to minimize ion losses and fragments to benefit from the “in-SLIM” accumulation process. Finally, wider SLIM tracks provided better performance than those with narrower tracks.

59 BASIC BIOLOGICAL SCIENCES↗

OBSERVABLE QUASI-PERIODIC OSCILLATIONS PRODUCED BY STEEP PULSE PROFILES IN MAGNETAR FLARES

Strong quasi-periodic oscillations (QPOs) in the tails of the giant gamma-ray flares seen in SGR 1806-20 and SGR 1900+14 are thought to be produced by starquakes in the flaring magnetar. However, the large fractional amplitudes (up to {approx}20%) observed are difficult to reconcile with predicted amplitudes of starquakes. Here, we demonstrate that the steeply pulsed emission profile in the tail of the giant flare can enhance the observed amplitude of the underlying oscillation, analogous to a beam of light oscillating in and out of the line of sight. This mechanism will also broaden the feature in the power spectrum and introduce power at harmonics of the oscillation. The observed strength of the oscillation depends on the amplitude of the underlying starquake, the orientation and location of the emission on the surface of the star, and the gradient of the light curve profile. While the amplification of the signal can be significant, we demonstrate that, even with uncertainties in the emission geometry, this effect is not sufficient to produce the observed QPOs. This result excludes the direct observation of a starquake and suggests that the observed variations come from modulations in the intensity of the emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Gain-phase grating based on spatial modulation of active Raman gain in cold atoms

In order to obtain an atomic grating which can diffract light into the high-order directions more efficiently, a gain-phase grating (GPG) based on the spatial modulation of active Raman gain is theoretically presented. This grating is induced by a pump field and a standing wave in ultracold atoms, and it not only diffracts a weak probe field propagating along a direction normal to the standing wave into the high-order directions, but also amplifies the amplitude of the zero-order diffraction. In contrast with electromagnetically induced grating or electromagnetically induced phase grating, the GPG has larger diffraction efficiencies in the high-order directions. Hence it is more suitable to be utilized as an all-optical router in optical networking and communication.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermally induced structural changes in incommensurate calcium barium niobate Ca{sub 0.28}Ba{sub 0.72}Nb{sub 2}O{sub 6} (CBN28)

The incommensurately modulated crystal structure of relaxor ferroelectric CBN28 was refined at elevated temperatures up to 330 Degree-Sign C in the 3+2 dimensional superspace group P4bm({alpha}{alpha}1/2,-{alpha}{alpha}1/2). The structural modulations mainly consisting of cooperative tilting of NbO{sub 6} octahedra and an occupational modulation of the large cation site Me2 persist beyond the diffuse ferroelectric transition with slightly reduced amplitudes. A change of symmetry was not observed. Both symmetrically non-equivalent NbO{sub 6} octahedra are distorted by off center shifts of the Nb atoms in the same direction along the tetragonal c-axis. The displacements of the Nb atoms are gradually reduced with increasing temperatures until one of the Nb atoms crosses the center of its coordination polyhedron near the transition temperature T{sub M} adopting an uncompensated anti-ferroelectric configuration. This change is accompanied by enhanced thermal motions of the Nb atoms along the c-axis. Structural distortions and electric polarization do not completely vanish at T{sub M} but may persist in fluctuating polar nanodomains. - Graphical abstract: Cross-over of the off-center shifts of both symmetrically non-equivalent niobium atoms from parallel to anti-parallel configuration in the incommensurately modulated crystal structure of relaxor ferroelectric Ca{sub 0.28}Ba{sub 0.72}Nb{sub 2}O{sub 6} (CBN28) at elevated temperatures (left side). The arrows point to columns of octahedra containing Nb1. The remaining octahedra are occupied by Nb2 atoms. Highlights: Black-Right-Pointing-Pointer The incommensurate structure of relaxor ferroelectric CBN28 was refined at high temperatures. Black-Right-Pointing-Pointer The modulations consist of a wave-like occupation of cation sites and displacements of the O atoms. Black-Right-Pointing-Pointer The modulations survive the ferroelectric phase transition and no change of symmetry was found. Black-Right-Pointing-Pointer Atomic shifts of the ions and the corresponding electric polarization do not completely vanish. Black-Right-Pointing-Pointer Thermal motions lead to a cross-over from parallel to anti-parallel configuration of Nb atoms.

36 MATERIALS SCIENCE↗

Autopilot for frequency-modulation atomic force microscopy

One of the most challenging aspects of operating an atomic force microscope (AFM) is finding optimal feedback parameters. This statement applies particularly to frequency-modulation AFM (FM-AFM), which utilizes three feedback loops to control the cantilever excitation amplitude, cantilever excitation frequency, and z-piezo extension. These loops are regulated by a set of feedback parameters, tuned by the user to optimize stability, sensitivity, and noise in the imaging process. Optimization of these parameters is difficult due to the coupling between the frequency and z-piezo feedback loops by the non-linear tip-sample interaction. Four proportional-integral (PI) parameters and two lock-in parameters regulating these loops require simultaneous optimization in the presence of a varying unknown tip-sample coupling. Presently, this optimization is done manually in a tedious process of trial and error. Here, we report on the development and implementation of an algorithm that computes the control parameters automatically. The algorithm reads the unperturbed cantilever resonance frequency, its quality factor, and the z-piezo driving signal power spectral density. It analyzes the poles and zeros of the total closed loop transfer function, extracts the unknown tip-sample transfer function, and finds four PI parameters and two lock-in parameters for the frequency and z-piezo control loops that optimize the bandwidth and step response of the total system. Implementation of the algorithm in a home-built AFM shows that the calculated parameters are consistently excellent and rarely require further tweaking by the user. The new algorithm saves the precious time of experienced users, facilitates utilization of FM-AFM by casual users, and removes the main hurdle on the way to fully automated FM-AFM.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Stability of an optical vortex in a circular nematic cell

The stability of an optical vortex in a cell with a circular cross section containing a nematic liquid crystal is studied. A modulation theory based on an averaged Lagrangian formulation is developed to study this stability. It is found that the vortex is stable unless the radius of the cell is very small, nearly the width of the vortex itself. Based on the analysis of a stationary vortex, the stability of a low-amplitude vortex in a large cell under the influence of its orbital angular momentum and the repelling effect of the cell boundary are studied. The predictions of this modulation theory are found to be in excellent agreement with numerical simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coherent destruction of tunneling in a lattice array under selective in-phase modulations

We explore the coherent destruction of tunneling (CDT) in a lattice array under selective in-phase harmonic modulations, in which some selected lattice sites are driven by in-phase harmonic oscillating fields and other lattice sites are undriven. Due to the occurrence of CDT, if the driving amplitude A and the driving frequency {omega} are tuned to satisfy the zeroth-order Bessel function J{sub 0}(A/{omega})=0, the driven lattice sites are approximately decoupled from the undriven lattice sites. The CDT even takes place in lattice systems with high-order couplings between non-nearest-neighbor lattice sites. By using the CDT induced by selective in-phase harmonic modulations, we propose a scheme for realizing directed transport of a single particle. It is possible to observe the CDT in an engineered optical waveguide array, which provides an opportunity for controlling light propagation and designing switchlike couplers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Holographic Fabrication of 3D Moiré Photonic Crystals Using Circularly Polarized Laser Beams and a Spatial Light Modulator

A moiré photonic crystal is an optical analog of twisted graphene. A 3D moiré photonic crystal is a new nano-/microstructure that is distinguished from bilayer twisted photonic crystals. Holographic fabrication of a 3D moiré photonic crystal is very difficult due to the coexistence of the bright and dark regions, where the exposure threshold is suitable for one region but not for the other. In this paper, we study the holographic fabrication of 3D moiré photonic crystals using an integrated system of a single reflective optical element (ROE) and a spatial light modulator (SLM) where nine beams (four inner beams + four outer beams + central beam) are overlapped. By modifying the phase and amplitude of the interfering beams, the interference patterns of 3D moiré photonic crystals are systemically simulated and compared with the holographic structures to gain a comprehensive understanding of SLM-based holographic fabrication. We report the holographic fabrication of phase and beam intensity ratio-dependent 3D moiré photonic crystals and their structural characterization. Superlattices modulated in the z-direction of 3D moiré photonic crystals have been discovered. This comprehensive study provides guidance for future pixel-by-pixel phase engineering in SLM for complex holographic structures.

42 ENGINEERING↗