Search NASA⌕ Search

SEARCH · Search NASA

Results for “Advanced Materials Processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

High-refractive index acrylate polymers for applications in nanoimprint lithography

The development of polymeric optical materials with a higher refractive index, transparency in the visible spectrum region and easier processability is increasingly desirable for advanced optical applications such as microlenses, image sensors, and organic light-emitting diodes. Most acrylates have a low refractive index (around 1.50) which does not meet the high performance requirements of advanced optical materials. In this research, three novel acrylates were synthesized via a facile one-step approach and used to fabricate optical transparent polymers. All of the polymers reveal good optical properties including high transparency (≥90%) in the visible spectrum region and high refractive index values (1.6363) at 550 nm. Moreover, nanostructures of these acrylate polymers with various feature sizes including nanogratings and photonic crystals were successfully fabricated using nanoimprint lithography. Finally, these results indicate that these acrylates can be used in a wide range of optical and optoelectronic devices where nanopatterned films with high refractive index and transparency are required.

36 MATERIALS SCIENCE↗

Microfluidics without channels: highly-flexible synthesis on a digital-microfluidic chip for production of diverse PET tracers

Positron emission tomography (PET) imaging is used for fundamental studies of living biological organisms and microbial ecosystems in applications ranging from biofuel production to environmental remediation to the study, diagnosis, and treatment monitoring of human disease. Routine access to PET imaging, to monitor biochemical reactions in living organisms in real time, could accelerate a broad range of research programs of interest to DOE. Using PET requires access to short-lived radioactive-labeled compounds that specifically probe the desired living processes. The overall aims of this project were to develop a miniature liquid-handling technology platform (called “microfluidics”) that increases the availability of diverse PET probes by reducing the cost and complexity of their production. Based on preliminary experiments showing that microfluidic chips can synthesis such compounds, we aimed to advance this technology to improve its robustness, increase its flexibility for a broad range of probes, and increase its user-friendliness. Through the research activities of this project, numerous advances were made; Tools were developed to enable the visualization of radioactive materials within microfluidic chips; Fundamental advances were made in the microfluidic chip architecture and fabrication process to increase its robustness and reliability; The microfluidic chip technology was shown to produce useful quantities of an example PET probes, and methods to further increase the output were successfully pursued; A “universal” chip was developed that could produce multiple types of PET probes, enabling the possibility of “on demand” synthesis of different probes; and Operation of the chip was automated to ensure minimal radiation exposure to the operator Based on the demonstrations of promising technical feasibility and performance, the microfluidic chip technology is currently being commercialized. It is anticipated that costs of microfluidic chips can be dramatically reduced in the future by leveraging economies of scale in the microelectronics industry, leading to low cost production of PET probes.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Composite fuselage crown panel manufacturing technology

Commercial fuselage structures contain significant challenges in attempting to save manufacturing costs with advanced composite technology. Assembly issues, materials costs, and fabrication of elements with complex geometry are each expected to drive the cost of composite fuselage structure. Key technologies, such as large crown panel fabrication, were pursued for low cost. An intricate bond panel design and manufacturing concept were selected based on the efforts of the Design Build Team. The manufacturing processes selected for the intricate bond design include multiple large panel fabrication with Advanced Tow Placement (ATP) process, innovative cure tooling concepts, resin transfer molding of long fuselage frames, and use of low cost materials forms. The process optimization for final design/manufacturing configuration included factory simulations and hardware demonstrations. These efforts and other optimization tasks were instrumental in reducing costs by 18 pct. and weight by 45 pct. relative to an aluminum baseline. The qualitative and quantitative results of the manufacturing demonstrations were used to assess manufacturing risks and technology readiness.

Willden, Kurtis↗

Manufacturing scale-up of composite fuselage crown panels

The goal of the Boeing effort under the NASA ACT program is to reduce manufacturing costs of composite fuselage structure. Materials, fabrication of complex subcomponents and assembly issues are expected to drive the costs of composite fuselage structure. Several manufacturing concepts for the crown section of the fuselage were evaluated through the efforts of a Design Build Team (DBT). A skin-stringer-frame intricate bond design that required no fasteners for the panel assembly was selected for further manufacturing demonstrations. The manufacturing processes selected for the intricate bond design include Advanced Tow Placement (ATP) for multiple skin fabrication, resin transfer molding (RTM) of fuselage frames, innovative cure tooling, and utilization of low-cost material forms. Optimization of these processes for final design/manufacturing configuration was evaluated through the fabrication of several intricate bond panels. Panels up to 7 ft. by 10 ft. in size were fabricated to simulate half scale production parts. The qualitative and quantitative results of these manufacturing demonstrations were used to assess manufacturing risks and technology readiness for production.

Willden, Kurtis↗

Analysis of Harrell Monosodium Titanate Lot #120111

Monosodium titanate (MST) for use in the Actinide Removal Process (ARP) must be qualified and verified in advance. A single qualification sample for each batch of material is sent to SRNL for analysis, as well as a statistical sampling of verification samples. The Harrell Industries Lot No.120111 qualification and the first 12 verification samples met all the requirements in the specification indicating the material is acceptable for use in the process. Analyses of Pail 125 verification sample fails the criteria for solids content and has measurably lower pH, density, and total bottle weight. The verification sample for Pail 125 was retested for weight percent solids after checking that all of the solids had been suspended. The sample again failed to meet acceptance criteria. SRNL recommends accepting Pails 1 through 120. Pails 121 through 125 should be rejected and returned to the vendor.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Three-dimensional mesostructures as high-temperature growth templates, electronic cellular scaffolds, and self-propelled microrobots

Recent work demonstrates that processes of stress release in prestrained elastomeric substrates can guide the assembly of sophisticated 3D micro/nanostructures in advanced materials. Reported application examples include soft electronic components, tunable electromagnetic and optical devices, vibrational metrology platforms, and other unusual technologies, each enabled by uniquely engineered 3D architectures. A vast disadvantage of these systems is that the elastomeric substrates, while essential to the assembly process, can impose significant engineering constraints in terms of operating temperatures and levels of dimensional stability; they also prevent the realization of 3D structures in freestanding forms. In this work, we introduce concepts in interfacial photopolymerization, nonlinear mechanics, and physical transfer that bypass these limitations. The results enable 3D mesostructures in fully or partially freestanding forms, with additional capabilities in integration onto nearly any class of substrate, from planar, hard inorganic materials to textured, soft biological tissues, all via mechanisms quantitatively described by theoretical modeling. Illustrations of these ideas include their use in 3D structures as frameworks for templated growth of organized lamellae from AgCl–KCl eutectics and of atomic layers of WSe 2 from vapor-phase precursors, as open-architecture electronic scaffolds for formation of dorsal root ganglion (DRG) neural networks, and as catalyst supports for propulsive systems in 3D microswimmers with geometrically controlled dynamics. Taken together, these methodologies establish a set of enabling options in 3D micro/nanomanufacturing that lie outside of the scope of existing alternatives.

36 MATERIALS SCIENCE↗

Observation of Materials Processes in Liquids in the Electron Microscope

Materials synthesis and the functioning of devices often indispensably involve liquid media. But direct visualization of dynamic process in liquids, especially with high spatial and temporal resolution, has been challenging. For solid materials, advances in aberration corrected electron microscopy have made observation of atomic level features a routine practice. Here we discuss the extent to which one can take advantage of the resolution of modern electron microscopes to image phenomenon occuring in liquids. We will describe the fundamentals of two different experimental approaches, closed and open liquid cells. We will illustrate the capabilities of each approach by considering processes in batteries and nucleation and growth of nanoparticles from solution. We conclude that liquid cell electron microscopy appears to be duly fulfilling its role for in situ studies of nanoscale processes in liquids, revealing physical and chemical processes otherwise difficult to observe.

Environmental Molecular Sciences Laboratory↗

Initial Results of PostProcess NDE Using Advanced Techniques

The U.S. Department of Energy, Office of Nuclear Energy Advanced Materials and Manufacturing Technologies Program is developing advanced materials and manufacturing technologies that will enable the safe and economical operation of both the current fleet and the next generation of advanced nuclear reactors. Post-process nondestructive evaluation capabilities are a key enabling technology that will be required to qualify and verify the condition of components produced using advanced materials and manufacturing technologies.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Disposition Plan for AGR-Related Equipment and Materials

The Advanced Gas Reactor (AGR) program has purchased equipment, chemicals, and acquired uranium feedstocks for the purpose of developing fuel fabrication processes, fabricating fuel for irradiation experiments, and growing domestic expertise. During the process of fuel development and qualification activities, various quantities of unused chemicals, uranium feedstocks, intermediate materials, scrap, and waste have accumulated at BWX Technologies Nuclear Operations Group (BWXT-NOG) and Oak Ridge National Laboratory (ORNL) that must be properly dispositioned. More expensive standalone equipment will be shipped to and repurposed at the Idaho National Laboratory(INL) and ORNL. Less expensive standalone equipment will be either abandoned in place for use by BWXT-NOG or discarded. Embedded equipment, that effects the functionality of BWXT-NOG systems, will be either abandoned in place or dismantled for disposal. Residual chemicals and non-fuel materials used for fuel fabrication and characterization will be repurposed when economically viable or discarded. High-purity uranium oxides, crystals, and metal will be repurposed for fuel fabrication. The majority of the high-enriched uranium will be included in an upcoming Central Scrap Management Office down blending operation. Archival materials will be collected of low-enriched uranium fuel kernels, tristructural isotropic (TRISO) fuel particles, and fuel compact that are residues of AGR fuel fabrication activities. Archival materials will be stored at either INL or ORNL. Some quality, unenriched uranium materials, that may be of interest to other parties investigating TRISO fuels, will also be archived. Uranium materials that are not archived and which cannot be readily repurposed will be discarded.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Weathering and erosion of fractured bedrock systems: Weathering and erosion of fractured bedrock systems

We explore the contribution of fractures (joints) in controlling the rate of weathering advance for a low-porosity rock by using methods of homogenization to create averaged weathering equations. The rate of advance of the weathering front can be expressed as the same rate observed in non-fractured media (or in an individual block) divided by the volume fraction of non-fractured blocks in the fractured parent material. In the model, the parent has fractures that are filled with a more porous material that contains only inert or completely weathered material. The low-porosity rock weathers by reaction-transport processes. As observed in field systems, the model shows that the weathering advance rate is greater for the fractured as compared to the analogous non-fractured system because the volume fraction of blocks is <1. The increase in advance rate is attributed both to the increase in weathered material that accompanies higher fracture density, and to the increase in exposure of surface of low-porosity rock to reaction-transport. For constant fracture aperture, the weathering advance rate increases when the fracture spacing decreases. Equations describing weathering advance rate are summarized in the “List of selected equations”. If erosion is imposed at a constant rate, the weathering systems with fracture-bounded bedrock blocks attain a steady state. In the erosional transport-limited regime, bedrock blocks no longer emerge at the air-regolith boundary because they weather away. In the weathering-limited (or kinetic) regime, blocks of various size become exhumed at the surface and the average size of these exposed blocks increases with the erosion rate. For convex hillslopes, the block size exposed at the surface increases downslope. This model can explain observations of exhumed rocks weathering in the Luquillo mountains of Puerto Rico.

54 ENVIRONMENTAL SCIENCES↗

NASA-UVA light aerospace alloy and structures technology program

The report on progress achieved in accomplishing of the NASA-UVA Light Aerospace Alloy and Structures Technology Program is presented. The objective is to conduct interdisciplinary graduate student research on the performance of next generation, light weight aerospace alloys and associated thermal gradient structures in close collaboration with researchers. The efforts will produce basic understanding of material behavior, new monolithic and composite alloys, processing methods, solid and fluid mechanics analyses, measurement advances, and a pool of educated graduate students. The presented accomplishments include: research on corrosion fatigue of Al-Li-Cu alloy 2090; research on the strengthening effect of small In additions to Al-Li-Cu alloys; research on localized corrosion of Al-Li alloys; research on stress corrosion cracking of Al-Li-Cu alloys; research on fiber-matrix reaction studies (Ti-1100 and Ti-15-3 matrices containing SCS-6, SCS-9, and SCS-10 fibers); and research on methods for quantifying non-random particle distribution in materials that has led to generation of a set of computer programs that can detect and characterize clusters in particles.

Gangloff, Richard P.↗

Revealing atomic-to-nanoscale oxidation mechanisms of metallic materials

Oxidation and corrosion are the leading causes of degradation and failure of metallic materials. Future alloy development requires the incorporation of corrosion resistance into alloy design and processing, and this begins with attaining a fundamental insight into dynamic reaction mechanisms and kinetics between a metal and aggressive environments. With recent advances in environmental transmission electron microscopy, there have been increased efforts to apply this approach to atomically probe the microscopic mechanisms that govern the oxidation and corrosion behavior of metallic materials. Consequently, fundamental insights have been obtained in understanding the underlying processes of oxidation and passivation, including active sites, surface restructuring, oxide/metal interface dynamics, and microstructure and phase evolution. Additionally, we discuss on-going and future developments that are expected to significantly advance the field of high-temperature oxidation and corrosion.

25 ENERGY STORAGE↗

Development of silicon nitride rotors for the ATTAP program at Garrett Ceramic Components

The development and fabrication of reliable high temperature-high strength silicon nitride rotors by Garrett Ceramic Components (GCC) for the Advanced Turbine Technology Applications Project (ATTAP) is discussed. GCC's progress will be presented, including mechanical properties characterization, in-process monitoring development, and extensive NDE analysis. The current status of material, process, and part properties of the rotors being developed will be compared to properties required for implementation and successful operation of advanced gas turbine engines at 2500 F.

Busovne, B. J., Jr.↗

The Development of HfO2-Rare Earth Based Oxide Materials and Barrier Coatings for Thermal Protection Systems

Advanced hafnia-rare earth oxides, rare earth aluminates and silicates have been developed for thermal environmental barrier systems for aerospace propulsion engine and thermal protection applications. The high temperature stability, low thermal conductivity, excellent oxidation resistance and mechanical properties of these oxide material systems make them attractive and potentially viable for thermal protection systems. This paper will focus on the development of the high performance and high temperature capable ZrO2HfO2-rare earth based alloy and compound oxide materials, processed as protective coating systems using state-or-the-art processing techniques. The emphasis has been in particular placed on assessing their temperature capability, stability and suitability for advanced space vehicle entry thermal protection systems. Fundamental thermophysical and thermomechanical properties of the material systems have been investigated at high temperatures. Laser high-heat-flux testing has also been developed to validate the material systems, and demonstrating durability under space entry high heat flux conditions.

Ceramic Matrix Composites↗

Analysis of Harrell Monosodium Titanate Lot #46000524120

Monosodium titanate (MST) for use in the Actinide Removal Process (ARP) must be qualified and verified in advance. A single qualification sample for each batch of material is sent to SRNL for analysis, as well as a statistical sampling of verification samples. The Harrell Industries Lot No.46000524120 qualification and the 14 verification samples met each of the selected specification requirements that were tested and, consequently, the material is acceptable for use in the ARP process.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Analysis of Harrell Monosodium Titanate Lot #46000619120

Monosodium titanate (MST) for use in the Actinide Removal Process (ARP) must be qualified and verified in advance. A single qualification sample for each batch of material is sent to SRNL for analysis, as well as a statistical sampling of verification samples. The Harrell Industries Lot #46000619120 qualification and the 13 verification samples met each of the selected specification requirements that were tested and, consequently, the material is acceptable for use in the ARP process.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Manufacturing Energy Intensity and Opportunity Analysis for Fiber-Reinforced Polymer Composites and Other Lightweight Materials

With their high strength-to-weight ratios, fiber-reinforced polymer (FRP) composites are important materials for lightweighting in structural applications; however, manufacturing challenges such as low process throughput and poor quality control can lead to high costs and variable performance, limiting their use in commercial applications. One of the most significant challenges for advanced composite materials is their high manufacturing energy intensity. This study explored the energy intensities of two lightweight FRP composite materials (glass- and carbon-fiber-reinforced polymers), with three lightweight metals (aluminum, magnesium, and titanium) and structural steel (as a reference material) included for comparison. Energy consumption for current typical and state-of-the-art manufacturing processes were estimated for each material, deconstructing manufacturing process energy use by sub-process and manufacturing pathway in order to better understand the most energy intensive steps. Energy saving opportunities were identified and quantified for each production step based on a review of applied R&D technologies currently under development in order to estimate the practical minimum energy intensity. Results demonstrate that while carbon fiber reinforced polymer (CFRP) composites have the highest current manufacturing energy intensity of all materials considered, the large differences between current typical and state-of-the-art energy intensity levels (the 'current opportunity') and between state-of-the-art and practical minimum energy intensity levels (the 'R&D opportunity') suggest that large-scale energy savings are within reach.

36 MATERIALS SCIENCE↗