Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Band Anticrossing in Highly Mismatched Compound Semiconductor Alloys

Compound semiconductor alloys in which metallic anions are partially replaced with more electronegative isoelectronic atoms have recently attracted significant attention. Group IIIN(sub x)V(sub 1-x) alloys with a small amount of the electronegative N substituting more metallic column V elements has been the most extensively studied class of such Highly Mismatched Alloys (HMAs). We have shown that many of the unusual properties of the IIIN(sub x)V(sub 1-x) alloys can be well explained by the Band Anticrossing (BAC) model that describes the electronic structure in terms of an interaction between highly localized levels of substitutional N and the extended states of the host semiconductor matrix. Most recently the BAC model has been also used to explain similar modifications of the electronic band structure observed in Te-rich ZnS(sub x)Te(sub 1-x) and ZnSe(sub y)Te(sub 1-y) alloys. To date studies of HMAs have been limited to materials with relatively small concentrations of highly electronegative atoms. Here we report investigations of the electronic structure of ZnSe(sub y)Te(sub 1-y) alloys in the entire composition range, y between 0 and 1. The samples used in this study are bulk ZnSe(sub y)Te(sub 1-y) crystals grown by either a modified Bridgman method or by physical vapor transport. Photomodulated reflection (PR) spectroscopy was used to measure the composition dependence of optical transitions from the valence band edge and from the spin-orbit split off band to the conduction band. The pressure dependence of the band gap was measured using optical absorption in a diamond anvil cell. We find that the energy of the spin-orbit split off valence band edge does not depend on composition and is located at about 3 eV below the conduction band edge of ZnSe. On the Te-rich side the pressure and the composition dependence of the optical transitions are well explained by the BAC model which describes the downward shift of the conduction band edge in terms of the interaction between localized Se states and the conduction band. On the other hand we show that the large band gap reduction observed on the Se-rich side of the alloy system is a result of an interaction between the localized Te level and the valence bands. This interaction leads to the formation of a Te-like valence band edge that strongly interacts with the light hole valence band. Calculations based on a modified k(sup dot)p model account for the reduction of the band gap and the large increase of the spin-orbit splitting observed in Se-rich ZnSe(sub y)Te(sub 1-y) alloys. We will also discuss the importance of these new results for understanding of the electronic structure and band offsets in other highly mismatched alloy systems.

Yu, Kin Man↗

Improved photo-degradation of dyes over Ag-loaded NiTiO3:V nanorods on visible-light-irradiation

Highlights: • Ag/NiTiO{sub 3}:V nanorods were prepared by electrospinning synthesis. • The crystalline crystal structure was refined. • The optical absorption and band structure were clarified. • Photocatalysis was greatly enhanced in Ag/NiTiO{sub 3}:V nanorods. • The photocatalysis activities and mechanisms were discussed. - Abstract: Pure and V-doped NiTiO{sub 3} (NiTiO{sub 3}:V) nanorods were synthesized via electrospinning synthesis using sol–gel precursors, followed by sintering the samples at 600 °C. And the subsequent Ag-loaded NiTiO{sub 3}:V nanorods were prepared by the chemical precipitation method (Ag/NiTiO{sub 3}:V). The phase formations were studied via X-ray powder diffraction (XRD) measurements. The Rietveld refinements were conducted to investigate the structural characteristics. The surface property of the nanorods was measured via morphologies and X-ray photon spectrascope (XPS) measurements. The absorption spectra of products indicate sufficient optical response in visible wavelength region. The indirect allowed band gap (2.18 eV) of NiTiO{sub 3} originates from the characteristic charge-transfer (CT) transitions of O{sup 2−} → Ti{sup 4+} (UV region) and Ni{sup 2+} → Ti{sup 4+} (visible light region). While Ag/NiTiO{sub 3}:V composites have a smaller band energy of 2.09 eV. The photocatalytic activities were investigated by photo-degradation of Rhodamine B (RhB) dye solutions under visible-light irradiation. The Ag/NiTiO{sub 3}:V nanorods were efficient for the photo-degradation of RhB dye solutions. EIS measurements were used to analyze the charge-carrier migration at the interfaces. The improved photocatalysis of Ag/NiTiO{sub 3}:V is ascribed to the narrowed band energy and enhanced efficiencies of the charge separations due to the Ag-coupling and V-doping in NiTiO{sub 3} lattices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ln 10 S 14 O (Ln = La, Pr, Nd, Sm) Oxysulfides: A Series of Direct n-Type Semiconductors

Lanthanoid oxysulfides are promising materials for technological applications owing to their magnetic, photoluminescent, catalytic, and optoelectronic properties. In this work, we report the solid-state synthesis and structural characterization of Ln 10 S 14 O (Ln = La, Ce, Pr, Nd, Sm) oxysulfides. Then, we present a thorough discussion on their electronic and photophysical properties. Through Tauc plot analysis and the derivation of the absorption spectrum fitting method (DASF), we determine that all oxysulfides have direct band gaps with energies of 2.84 eV (La), 2.02 eV (Ce), 2.56 eV (Pr), 2.64 eV (Nd), and 2.41 eV (Sm). Furthermore, surface photovoltage spectroscopy (SPS) shows photovoltage (ΔCPD) values of –0.4 to –1.1 V for La-, Pr-, Nd-, and Sm-containing compounds when illuminated near the optical band gap, indicating that these oxysulfides are n-type semiconductors, which is consistent with Mott–Schottky analysis. Photovoltages under sub-band gap illumination energy and photovoltage decay data suggest mid-band gap states possibly arising from the lanthanoid 4f orbitals and/or defects within the crystal structure or at the particle surfaces. These photophysical properties suggest possible applications of the oxysulfides in photoelectrochemical and photovoltaic energy conversion.

14 SOLAR ENERGY↗

Speciation of technetium in carbonate media under helium ions and γ radiation

Technetium carbonates complexes produced by chemical, electrochemical and radiolytic methods have been studied by UV-Visible, X-ray Absorption Fine Structure (XAFS) and Density Functional Theory methods. The (NH 4 ) 2 TcCl 6 salt was dissolved in 2 M KHCO 3 . The resulting purple solution was analyzed by XAFS and UV-Visible spectroscopy. The UV-Visible spectra exhibits a band centered at 515 nm. The XAFS results were consistent with the presence of polymeric species containing the [Tc 2 (μ-O) 2 ] 4+ core coordinated to carbonate ligand. Concerning the electrochemical methods, the pertechnetate anion was electrochemically reduced in concentrated carbonate solution [(CO 3 2- )=5 M and (HCO 3 - )=0.5 M]. For the radiolytic reduction, the speciation of Tc under Helium ions particle beam and γ radiation was examined by UV-Visible and XAFS spectroscopy in high concentrated carbonate media. In concentrated carbonate solutions, pertechnetate as Tc(VII), was not reduced under irradiation due to the formation of carbonate radical which is a strong oxidant. Then, the solution proposed was the addition of formate to the solution which can scavenge hydroxyl radical 10 times faster than carbonate and prevent re-oxidation of reduced technetium. The XANES and EXAFS spectroscopies, approved by theoretical methods, revealed that the final product of the radiolytic reduction of pertechnetate is in the +IV oxidation state. The final structure of the reduced product by He 2+ radiolysis was the same as electrochemical reduction. From this complex determination and evolution vs. the dose, this study is reporting the solubility of the Tc(IV) complex.

Ghalei, Mohammad↗

Green’s Function Coupled-Cluster Approach: Simulating Photoelectron Spectra for Realistic Molecular Systems

In this paper we present an efficient implementation for the analytical energy- dependent coupled cluster Green’s function with singles and doubles (GFCCSD) approach with our first practice being computing spectral functions of real molecular systems. Due to its algebraic structure, the presented method is highly scalable, and is capable of computing spectral function for a given molecular system in any energy region. Several typical examples have been given to demonstrate its capability of computing spectral functions not only in the valence band, but also in the core-level energy region. Satellite peaks have been observed in the inner valence band and core-level energy region where many-body effect becomes significant and single particle picture of ionization often breaks down. The accuracy test has been carried out by extensively comparing our GFCCSD results with experimental results as well as the theoretical results from other methods. It turns out GFCCSD method is able to provide qualitative or semi-quantitative level of description of ionization processes in both the core and valence regimes. To significantly improve the GFCCSD results for the main states, larger basis set can usually be employed, whereas the improvement of the GFCCSD results for the satellite states needs higher order many-body terms to be included in the GFCC implementation.

electronic structure theory↗

First-principles study of electronic and elastic properties of LuAl{sub 3}

A systematic theoretical study of electronic structure of rare earth intermetallic LuAl{sub 3} has been carried out using full potential linearized augmented plane wave (FP-LAPW) method based on density functional theory (DFT) within the generalized gradient approximation(GGA) for exchange and correlation potential. The ground state properties such as lattice constant (a{sub o}), bulk modulus (B) and pressure derivative of bulk modulus (B′) were evaluated. LuAl{sub 3} has the cubic AuCu{sub 3} type crystal structure. The electronic properties of this compound have been analyzed quantatively from band structure and DOS. It is clear from band structure that this compound is metallic in nature. The calculated elastic constants infer that this compound is mechanically stable.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Searching for correlations between vibrational spectral features and structural parameters of silicate glass network

Infrared (IR) and Raman spectroscopic features of silicate glasses are usually interpreted based on the analogy with those of smaller molecules, molecular clusters, or crystalline counterparts; this study tests the accuracy and validity of these widely cited peak assignment schemes by comparing vibrational spectral features with bond parameters of the glass network created by molecular dynamics (MD) simulations. A series of sodium silicate glasses with compositions of [Na 2 O] x [Al 2 O 3 ] 2 [SiO 2 ] 98- x with x = 7, 12, 17, and 22 were synthesized and analyzed with IR and Raman. A silica glass substrate and a crystalline quartz were also analyzed for comparison. Glass structures with the same compositions were generated with MD simulations using three types of potentials: fixed partial charge pairwise (Teter), partial diffuse charge potential (MGFF), and bond order-based charge transfer potential (ReaxFF). The comparison of simulated and experimental IR spectra showed that, among these three potentials tested, ReaxFF reproduces the concentration dependence of spectral features closest to the experimentally observed trend. Hence, the bond length and angle distributions as well as Si– Q n species and ring size distributions of silica and sodium silicate glasses were obtained from ReaxFF-MD simulations and further compared with the peak assignment or deconvolution schemes—which have been widely used since 1970s and 1980s—(a) correlation between the IR peak position in the Si–O stretch region (1050-1120 cm -1 ) and the Si–O–Si bond angle; (b) deconvolution of the Raman bands in the Si–O stretch region with the Q n speciation; and (c) assignment of the Raman bands in the 420-600 cm -1 region to the bending modes of (SiO) n rings with different sizes (typically, n = 3-6). The comparisons showed that none of these widely used methods is congruent with the bond parameters or structures of silicate glass networks produced via ReaxFF-MD simulations. This result invokes that the adequacy of these spectral interpretation methods must be questioned. Alternative interpretations are proposed, which are to be tested independently in future studies.

36 MATERIALS SCIENCE↗

Structural, electronic and vibrational properties of lanthanide monophosphide at high pressure

A first-principles plane wave self-consistent method with the ultra-soft-pseudopotential scheme in the framework of the density functional theory (DFT) is performed to study structural, electronic and vibrational properties of LaP for Rock-salt (NaCl/Bl) and Cesium-chloride (CsCl/B2) phases. The instability of Rock-salt (NaCl/Bl) phases around the transition is discussed. Conclusions based on electronic energy band structure, density of state, phonon dispersion and phonon density of states in both phases are outlined. The calculated results are consistence and confirm the successful applicability of quasi-harmonic phonon theory for structural instability studies for the alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical properties of In{sub 2}Se{sub 3} single crystals and photosensitivity of Al/In{sub 2}Se{sub 3} Schottky barriers

In{sub 2}Se{sub 3} single crystals {approx}40 mm long and 14 mm in diameter were grown by the Bridgman method. The composition of grown single crystals and their crystal structure were determined. The conductivity ({sigma}) and Hall constant (R) of grown single crystals were measured and the first Schottky barriers Al/n-In{sub 2}Se{sub 3} were fabricated. Rectification and photovoltaic effect were detected in the new structures. Based on the study of the photosensitivity spectra of Al/n-In{sub 2}Se{sub 3} structures, the nature of the interband transitions and band gap of In{sub 2}Se{sub 3} crystals were determined. It was concluded that the new structures can be applied to develop broadband photoconverters of optical radiation.

36 MATERIALS SCIENCE↗

Designing a porous-crystalline structure of β-Ga 2 O 3 : a potential approach to tune its opto-electronic properties

β-Ga 2 O 3 has drawn recent attention as a state-of-the-art electronic material due to its stability, optical transparency and appealing performance in power devices. However, it has also found a wider range of opto-electronic applications including photocatalysis, especially in its porous form. For such applications, a lower band gap must be obtained and an electron–hole spatial separation would be beneficial. Like many other metal oxides ( e.g. Al 2 O 3 ), Ga 2 O 3 can also form various types of porous structure. Herein, we investigate how its optical and electronic properties can be changed in a particular porous structure with stoichiometrically balanced and extended vacancy channels. We apply a set of first principles computational methods to investigate the formation and the structural, dynamic, and opto-electronic properties. We find that such an extended vacancy channel is mechanically stable and has relatively low formation energy. We also find that this results in a spatial separation of the electron and hole, forming a long-lived charge transfer state that has desirable characteristics for a photocatalyst. In addition, the electronic band gap reduces to the vis-region unlike the transparency in the pure β-Ga 2 O 3 crystal. Thus, our systematic study is promising for the application of such a porous structure of β-Ga 2 O 3 as a versatile electronic material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Abnormal blocking of a guided mode propagating in a silicon optical waveguide with periodic tunnel coupling

This paper considers abnormal blocking of a guided mode propagating in a silicon optical waveguide with periodic tunnelling inserts. Using an independent two-dimensional analysis by the method of lines (MoL) and direct simulation by the finite-difference time-domain (FDTD) method, we have identified additional signal blocking bands, unrelated to Bragg conversion to backward guided modes of the parent silicon waveguide. These bands are due to the conversion of the incident wave energy to a leaky quasi-mode of the periodically segmented structure, which subsequently transfers the energy to the ambient medium in the form of radiation modes. A distinctive feature of this phenomenon is resonant coupling of the guided mode of the strip waveguide with its radiation modes, which is due to the weak tunnel coupling with the periodically segmented structure. This structure does not support independent guided propagation, so the energy stored in it is re-emitted to space. The abnormal blocking effect may find application in optical telecommunications elements and in the fabrication of optical sensors. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ionizing photon interactions modulate the optical properties of crystals with femtosecond scale temporal resolution

In this work, we continue our study of a new method for the detection of ionizing radiation with the potential for a dramatic improvement in coincidence time resolution (CTR) for time-of-flight positron emission tomography (ToF-PET) using the modulation of a material's optical properties instead of the scintillation mechanism. Our previous work has shown that for non-scintillation materials such as bismuth silicon oxide (BSO) and cadmium telluride (CdTe), their refractive index can be modulated by annihilation photon interactions. Additionally, the ultrafast nature of this process however remains unexplored. The ionizing radiation-induced charge carriers alter the local band structure in these materials, thus changing the complex refractive index. This mechanism is routinely used at the linac coherent light source (LCLS) facility of the SLAC National Accelerator Laboratory to measure x-ray pulse arrival times with femtosecond scale resolution for photon energies between 0.5 and 10 keV. The method described here follows that example by using a frequency chirped visible continuum pulse to provide a monotonic wavelength-to-time mapping by which one can measure the time-dependent refractive index modulation. In addition, we describe an interference-based measurement setup that allows for significantly improved sensitivity while preserving a timing precision of approximately 10 fs (σ) when measuring the arrival time of below 10 keV x-ray pulses with yttrium aluminum garnet (YAG) crystal. The method is presented in the context of ToF-PET application with further discussions on the potential CTR achievable if a similar detection concept is adopted for detecting 511 keV photons. Semi-empirical analysis indicates that the predicted CTR achievable is on the order of 1 ps (FWHM).

59 BASIC BIOLOGICAL SCIENCES↗

Photonic Band Gap Properties of One-dimensional Generalized Fibonacci Photonic Quasicrystal Containing Superconductor Material

In this work, we theoretically investigate the transmission properties of one-dimensional (1D) Fibonacci photonic quasicrystal (PQC) by using the transfer matrix modeling (TMM) method. The PQC structure is composed of alternated layers of isotropic dielectric (SiO{sub 2}) and a high-T{sub c} superconductor (YBCO). Frequency-dependent dispersion formula according to the two-fluid Gorter–Casimir theory has been adopted to describe the optical response of the superconducting material. Within the framework of the TMM method, we studied the effect of many parameters such as the thicknesses of the dielectric and superconductor layers, Fibonacci lattice parameters, and the operating temperature on the transmission behaviors of the PQC structure. Our numerical results reveal the transmission cutoff frequency can be tuned efficiently by the operating temperature as well as by the thicknesses of the constituent materials. We found that increasing the temperature and the angle of incidence, maintaining materials thicknesses constant, there is a shift of the cutoff frequency to lower frequency values. Nevertheless, this cutoff frequency is shifted to higher values with increasing the superconductor layer thickness. Moreover, we found that the width and the number of the photonic bandgaps can be controlled by order of Fibonacci sequence. Our results are promising for the design of tunable filtering devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser induced optical bleaching in Ge{sub 12}Sb{sub 25}S{sub 63} chalcogenide thin film

Photo induced effects of Ge{sub 12}Sb{sub 25}S{sub 63} films illuminated with 532 nm laser light is investigated from transmission spectra measured by FTIR spectroscopy. The material exhibit photo bleaching (PB) when exposed to band gap laser for a prolonged time in vacuum. The PB is ascribed to structural changes inside the film as well as surface photo oxidation. The amorphous nature of thin films was detected by X-ray diffraction. The chemical composition of the deposited thin films was examined by Energy Dispersive X-ray Analysis (EDAX). The refractive indices of the films were obtained from the transmission spectra based on inverse synthesis method, and the optical band gaps were derived from optical absorption spectra using the Tauc plot. The dispersion of the refractive index is discussed in terms of the single-oscillator Wemple–DiDomenico model. It was found that, the mechanism of the optical absorption follows the rule of the allowed non-direct transition. Raman spectra analysis also supports the optical changes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Structure, Lattice Dynamics, and Superconducting Properties of Mercury-Alkaline Earth Metal Compounds: a First-Principles Study

The electronic structure, lattice dynamics, and superconducting properties of SrHg and BaHg intermetallic compounds are investigated using plane wave pseudo-potential and linear response methods based on density functional theory. The ground state properties such as lattice parameters are in good agreement with previously reported results. The positive phonon frequencies reveal the stability of both compounds in B{sub 2} (CsCl-type) structure. The metallic nature of SrHg and BaHg is confirmed by the electronic band structure as well as phonon dispersion curves. The superconducting behavior described in terms of Eliashberg spectral function (α{sup 2}F(ω)) and electron-phonon coupling constant (λ). The calculated values of superconducting transition temperatures (T{sub c}) show good agreement with available experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TiO{sub 2} flower-like nanostructures decorated with CdS/PbS nanoparticles

Highlights: • TiO{sub 2} flower-like nanostructures were prepared with the use of Ti foil and 30% H{sub 2}O{sub 2}. • QDs of CdS and PbS were deposited using the SILAR method. • The SILAR method makes it possible to control the size of QDs. • Band gap energy of CdS was found to be 2.35 eV. • Sensitization of TiO{sub 2} with CdS or PbS improves the photoelectrochemical properties. - Abstract: Flower-like nanostructures of TiO{sub 2} were prepared by immersing Ti foil in 30% H{sub 2}O{sub 2} at 80 °C for times varying from 15 to 240 min. Upon annealing at 450 °C in an Ar atmosphere, the received amorphous samples crystallized in an anatase structure with rutile as a minority phase. SEM images revealed that partially formed flowers were present at the surface of the prepared samples as early as after 15 min of immersion. The size of the individual flowers increased from 400–800 nm after 15 min of reaction to 2.5–6.0 μm after 240 min. It was also found that surface is very rough and surface development is considerable. After 45 min of immersion, the nanoflowers were sensitized with CdS and PbS quantum dots (QDs-CdS/QDs-PbS) deposited using the SILAR method from water- and methanol-based precursor solutions at different concentrations (0.001–0.1 M). QDs-CdS crystallized in the hawleyite structure, while QDs-PbS in the galena form. SEM analysis showed the tendency of quantum dots to agglomerate at high concentrations of the precursor in water-based solutions. QDs obtained from methanol-based solutions were uniformly distributed. The produced QDs-PbS were smaller than QDs-CdS. Based on the optical reflectance spectra, the band-gap energies of TiO{sub 2} nanostructures with and without QDs were calculated to be 3.32 eV for flower-like TiO{sub 2} nanostructures and 2.35 eV for QDs-CdS. The photoelectrochemical behaviour of nanoflowers was found to improve significantly after the deposition of QDs-CdS.

36 MATERIALS SCIENCE↗

A description of the correlated k distributed method for modeling nongray gaseous absorption, thermal emission, and multiple scattering in vertically inhomogeneous atmospheres

A radiative transfer method for treating nongray gaseous absorption and thermal emission in vertically inhomogeneous multiple scattering atmospheres is described. Probability density distributions of absorption coefficient strength are derived from line-by-line calculations to construct line-by-line and band model based k distributions. The monotonic ordering of absorption coefficient strengths in these k distributions implicitly preserves the monochromatic structure of the atmosphere at different pressure levels, thus simulating monochromatic spectral integration at a fraction of the line-by-line computing cost. The k distribution approach also permits accurate modeling of overlapping absorption by different atmospheric gases and accurate treatment of nongray absorption in multiple scattering media. It is shown that the correlated k distribution method is capable of achieving numerical accuracy to within 1 percent of cooling rates obtained with line-by-line calculations throughout the troposphere and most of the stratosphere.

Lacis, Andrew A.↗

Strong Correlation Effect in Ferrimagnetic Half-Metallic V{sub 2}CoAl and V{sub 2}CoGa Heusler Compounds

We present first-principles calculations based on the full-potential linearized augmented plane wave (FP-LAPW) method to investigate the structural, elastic, electronic, and magnetic properties of the Heusler compounds V{sub 2}CoAl and V{sub 2}CoGa. We explore different magnetic configurations in both regular and inverse Heusler structures: the Cu{sub 2}MnAl-type and Hg{sub 2}CuTi-type structures respectively. Our compounds are found to be ferrimagnets in the inverse Heusler structure. To take into account the effects of the strong correlation among the localized d-states, we perform a calculation using the GGA+U method (the general gradient approximation with the Hubbard on-site Coulomb correction U). Then we show that both compounds exhibit a half-metallic character and have a magnetic moment of 2.00 μ{sub B} per formula unit. This latter statement is coherent with the generalized Slater-Pauling rule (SP). In terms of the band structure calculations, we explain the formation of the indirect energy band gaps in the spin-majority channels. We also use the mean-field approximation (MFA) to discuss the magnetic exchange couplings and predict the Curie temperature for both compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗