Search NASA⌕ Search

SEARCH · Search NASA

Results for “CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Calculation of photodetachment cross sections and photoelectron angular distributions of negative ions using density functional theory

Recently, the development of photoelectron velocity map imaging makes it much easier to obtain the photoelectron angular distributions (PADs) experimentally. However, explanations of PADs are only qualitative in most cases, and very limited works have been reported on how to calculate PAD of anions. In the present work, we report a method using the density-functional-theory Kohn-Sham orbitals to calculate the photodetachment cross sections and the anisotropy parameter β. The spherical average over all random molecular orientation is calculated analytically. A program which can handle both the Gaussian type orbital and the Slater type orbital has been coded. The testing calculations on Li{sup −}, C{sup −}, O{sup −}, F{sup −}, CH{sup −}, OH{sup −}, NH{sub 2}{sup −}, O{sub 2}{sup −}, and S{sub 2}{sup −} show that our method is an efficient way to calculate the photodetachment cross section and anisotropy parameter β for anions, thus promising for large systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Critical analysis of fragment-orbital DFT schemes for the calculation of electronic coupling values

We present a critical analysis of the popular fragment-orbital density-functional theory (FO-DFT) scheme for the calculation of electronic coupling values. We discuss the characteristics of different possible formulations or “flavors” of the scheme which differ by the number of electrons in the calculation of the fragments and the construction of the Hamiltonian. In addition to two previously described variants based on neutral fragments, we present a third version taking a different route to the approximate diabatic state by explicitly considering charged fragments. In applying these FO-DFT flavors to the two molecular test sets HAB7 (electron transfer) and HAB11 (hole transfer), we find that our new scheme gives improved electronic couplings for HAB7 (−6.2% decrease in mean relative signed error) and greatly improved electronic couplings for HAB11 (−15.3% decrease in mean relative signed error). A systematic investigation of the influence of exact exchange on the electronic coupling values shows that the use of hybrid functionals in FO-DFT calculations improves the electronic couplings, giving values close to or even better than more sophisticated constrained DFT calculations. Comparing the accuracy and computational cost of each variant, we devise simple rules to choose the best possible flavor depending on the task. For accuracy, our new scheme with charged-fragment calculations performs best, while numerically more efficient at reasonable accuracy is the variant with neutral fragments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DFT calculations of electronic and optical properties of SrS with LDA, GGA and mGGA functionals

The theoretical investigations of electronic and optical properties of SrS are made using the first principle DFT calculations. The calculations are performed for the local-density approximation (LDA), generalized gradient approximation (GGA) and for an alternative form of GGA i.e. metaGGA for both rock salt type (B1, Fm3m) and cesium chloride (B2, Pm3m) structures. The band structure, density of states and optical spectra are calculated under various available functional. The calculations with LDA and GGA functional underestimate the values of band gaps with all functional, however the values with mGGA show reasonably good agreement with experimental and those calculated by using other methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

BH-DFTB/DFT calculations for iron clusters

We present a study on the structural, electronic, and magnetic properties of Fe{sub n}(n = 2 − 20) clusters by performing density functional tight binding (DFTB) calculations within a basin hopping (BH) global optimization search followed by density functional theory (DFT) investigations. The structures, total energies and total spin magnetic moments are calculated and compared with previously reported theoretical and experimental results. Two basis sets SDD with ECP and 6-31G** are employed in the DFT calculations together with BLYP GGA exchange-correlation functional. The results indicate that the offered BH-DFTB/DFT strategy collects all the global minima of which different minima have been reported in the previous studies by different groups. Small Fe clusters have three kinds of packing; icosahedral (Fe{sub 9−13}), centered hexagonal antiprism (Fe{sub 14−17}, Fe{sub 20}), and truncated decahedral (Fe{sub 17(2)}, Fe{sub 18−19}). It is obtained in a qualitative agreement with the time of flight mass spectra that the magic numbers for the small Fe clusters are 7, 13, 15, and 19 and with the collision induced dissociation experiments that the sizes 6, 7, 13, 15, and 19 are thermodynamically more stable than their neighboring sizes. The spin magnetic moment per atom of Fe{sub n}(n = 2 − 20) clusters is between 2.4 and 3.6 μ{sub B} for the most of the sizes. The antiferromagnetic coupling between the central and the surface atoms of the Fe{sub 13} icosahedron, which have already been reported by experimental and theoretical studies, is verified by our calculations as well. The quantitative disagreements between the calculations and measurements of the magnetic moments of the individual sizes are still to be resolved.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge transfer excitation energies from ground state density functional theory calculations

Calculating charge transfer (CT) excitation energies with high accuracy and low computational cost is a challenging task. Kohn-Sham density functional theory (KS-DFT), due to its efficiency and accuracy, has achieved great success in describing ground state problems. To extend to excited state problems, our group recently demonstrated an approach with good numerical results to calculate low-lying and Rydberg excitation energies of an N-electron system from a ground state KS or generalized KS calculations of an (N-1)-electron system via its orbital energies. In the present work, we explore further the same methodology to describe CT excitations. Numerical results from this work show that performance of conventional density functional approximations (DFAs) is not as good for CT excitations as for other excitations due to the delocalization error. Applying localized orbital scaling correction (LOSC) to conventional DFAs, a recently developed method in our group to effectively reduce the delocalization error, can improve the results. Overall, the performance of this methodology is better than time dependent DFT (TDDFT) with conventional DFAs. In addition, it shows that results from LOSC-DFAs in this method reach similar accuracy to other methods, such as ΔSCF, G 0 W 0 with Bethe-Salpeter equations, particle-particle random phase approximation, and even high-level wavefunction methods like CC2. Our analysis shows that the correct 1/R trend for CT excitation can be captured from LOSC-DFA calculations, stressing that the application of DFAs with the minimal delocalization error is essential within this methodology. This work provides an efficient way to calculate CT excitation energies from ground state DFT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Calculation of self-diffusion coefficients in supercritical carbon dioxide using mean force kinetic theory

This paper presents an application of mean force kinetic theory (MFT) to the calculation of the self-diffusivity of CO 2 in the supercritical fluid regime. Two modifications to the typical application of MFT are employed to allow its application to a system of molecular species. Therefore, the first is the assumption that the inter-particle potential of mean force can be obtained from the molecule center-of-mass pair correlation function, which in the case of CO 2 is the C–C pair correlation function. The second is a new definition of the Enskog factor that describes the effect of correlations at the surface of the collision volume. The new definition retains the physical picture that this quantity represents a local density increase, resulting from particle correlations, relative to that in the zero density homogeneous fluid limit. These calculations are facilitated by the calculation of pair correlation functions from molecular dynamics (MD) simulations using the FEPM2 molecular CO2 model. The self-diffusivity calculated from theory is in good agreement with that from MD simulations up to and slightly beyond the density at the location of the Frenkel line. The calculation is compared with and is found to perform similarly well to other commonly used models but has a greater potential for application to systems of mixed species and to systems of particles with long range interatomic potentials due to electrostatic interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate parameterization of the kinetic energy functional for calculations using exact-exchange

In this report, electronic structure calculations based on Kohn-Sham density functional theory (KSDFT) that incorporate exact exchange or hybrid functionals are associated with large computational expense, a consequence of the inherent cubic scaling bottleneck and large associated prefactor, which limits the length and time scales that can be accessed. Though orbital-free density functional theory (OFDFT) calculations scale linearly with system size and are associated with significantly smaller prefactor, they are limited by the absence of accurate density-dependent kinetic energy functionals. Therefore, the development of accurate density-dependent kinetic energy functionals is important for OFDFT calculations of large realistic systems. To this end, we propose a method to train kinetic energy functional models at the exact-exchange level of theory by using a dictionary of physically relevant terms that have been proposed in the literature in conjunction with linear or nonlinear regression methods to obtain the fitting coefficients. For our dictionary, we use gradient expansion of the kinetic energy, nonlocal models proposed in the literature and their nonlinear combinations, such as a model that incorporates spatial correlations between higher order derivatives of electron density at two points. The predictive capabilities of these models are assessed by using a variety of model one-dimensional systems that exhibit diverse bonding characteristics, such as a chain of eight hydrogens, LiF, LiH, C 4 H 2 , C 4 N 2 and C 3 O 2 . We show that by using data from model one-dimensional KSDFT calculations performed using the exact-exchange functional for only a few neutral structures, it is possible to generate models with high accuracy for charged systems as well as electron and kinetic energy densities during self-consistent field iterations. In addition, we show that it possible to learn both the orbital dependent terms, i.e., the kinetic energy and the exact-exchange energy, and models that incorporate additional nonlinearities in spatial correlations, such as a quadratic model, are needed to capture subtle features of the kinetic energy density that are present in exact-exchange-based KSDFT calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculating the space-charge-limited current density for nonplanar geometries by simulating the charge-free electric field

Calculating the space-charge-limited-current density (SCLCD) for a complicated diode geometry often requires computationally expensive particle-in-cell (PIC) codes. Here, this paper addresses this issue by using the charge-free electric field $E_0$ calculated using COMSOL Multiphysics to determine local and global SCLCD. The SCLCD obtained by using the surface average of $|E_0|^2$ on the cathode recovers theoretical results for one-dimensional (1D) planar, cylindrical, and tip-to-tip geometries in appropriate limits. We next compared tip-to-tip calculations with the SCLCD obtained using the PIC code Empire. The SCLCD calculated using COMSOL agreed well with Empire for flatter 1D tip-to-tip geometries and diverged with increasing sharpness. Physically, Empire predicts lower SCLCD than COMSOL because the electrons spread due to concentrated space-charge at the tip, whereas theory assumes that the electrons follow the charge-free electric field lines. We further assess the behavior of the SCLCD for tips protruding from the centers of flat, circular plates of various areas. Larger plate areas with constant tip size recover the 1D planar SCLCD globally and 1D tip-to-tip SCLCD locally, while reducing the difference between Empire and COMSOL calculations since larger plates capture more of the emitted electrons, reducing SCLCD suppression due to beam spreading. These results show that charge-free electric field simulations can be used to determine the SCLCD without needing to simulate particle dynamics in PIC.

Wright, Jack K. [Purdue Univ., West Lafayette, IN ↗

Neutronics Calculations for a Hypothetical Plasma-Jet-Driven Magneto-Inertial-Fusion Reactor

We present neutronics calculations for a hypothetical fusion reactor based on the repetitively pulsed concept of plasma-jet-driven magneto-inertial fusion (PJMIF). A PJMIF reactor is envisioned to have a replaceable, 3-m-radius spherical metal first wall exposed to 14.1-MeV neutrons, a fast-flowing FLiBe liquid blanket (with thickness 0.75 m) behind the first wall serving as the primary coolant and tritium-breeding medium, and finally an outer structural spherical wall shielded by the blanket. Cylindrical penetrations through both walls and the flowing blanket allow for hundreds of plasma-gun drivers to inject hypersonic plasma jets that form both the DT plasma target and high-Z spherically imploding plasma liner to compress the target. This research is the first to conduct Monte Carlo N Particle (MCNP6.2) and CINDER2008 neutronics calculations relevant to the PJMIF reactor configuration, with the primary objectives of (1) determining the neutron flux as a function of blanket thickness in the blanket and key reactor components and (2) the tritium production rate in the liquid blanket. These results will be used to estimate other quantities of interest, such as first-wall and gun-electrode lifetimes based on DPA accumulation, optimum blanket thickness, activation level of the outer wall and xenon liner, and achievable tritium-breeding ratios. Energy dependent flux tallies were used to calculate neutron flux inside the FLiBe blanket and outer wall, as well as the cylindrical ports where plasma guns are located. Tally multipliers of the flux in MCNP6.2 estimated tritium breeding ratio, DPA, and nuclear heating, while the depletion code CINDER2008 was used to compare tritium breeding ratios with MCNP6.2 and calculate activation of the outer wall and xenon liner. These calculations provide a baseline for blanket requirements necessary for power production in a PJMIF reactor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NUMERICAL STUDY OF TURBULENT MIXING LAYERS WITH NON-EQUILIBRIUM IONIZATION CALCULATIONS

Highly ionized species, such as C IV, N V, and O VI, are commonly observed in diffuse gas in various places in the universe, such as in our Galaxy's disk and halo, high velocity clouds (HVCs), external galaxies, and the intergalactic medium. These ions are often used to trace hot gas whose temperature is a few times 10{sup 5} K. One possible mechanism for producing high ions is turbulent mixing of cool gas (such as that in a high or intermediate velocity cloud) with hotter (a few times 10{sup 6} K) gas in locations where these gases slide past each other. By using hydrodynamic simulations with radiative cooling and non-equilibrium ionization (NEI) calculations, we investigate the physical properties of turbulent mixing layers and the production of high ions (C IV, N V, and O VI). We find that most of the mixing occurs on the hot side of the hot/cool interface, where denser cool gas is entrained and mixed into the hotter, more diffuse gas. Our simulations reveal that the mixed region separates into a tepid zone containing radiatively cooled, C IV-rich gas and a hotter zone which is rich in C IV, N V, and O VI. The hotter zone contains a mixture of low and intermediate ions contributed by the cool gas and intermediate and high-stage ions contributed by the hot gas. Mixing occurs faster than ionization or recombination, making the mixed gas a better source of C IV, N V, and O VI in our NEI simulations than in our collisional ionization equilibrium (CIE) simulations. In addition, the gas radiatively cools faster than the ions recombine, which also allows large numbers of C IV, N V, and O VI ions to linger in the NEI simulations. For these reasons, our NEI calculations predict more C IV, N V, and O VI than our CIE calculations predict. We also simulate various initial configurations and find that more C IV is produced when the shear speed is smaller or the hot gas has a higher temperature. We find no significant differences between simulations having different perturbation amplitudes in the initial boundary between the hot and cool gas. We discuss the results of our simulations, compare them with observations of the Galactic halo and highly ionized HVCs, and compare them with other models, including other turbulent mixing calculations. The ratios of C IV to N V and N V to O VI are in reasonable agreement with the averages calculated from observations of the halo. There is a great deal of variation from sightline to sightline and with time in our simulations. Such spatial and temporal variation may explain some of the variation seen among observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Calculating the habitable zones of multiple star systems with a new interactive Web site

We have developed a comprehensive methodology and an interactive Web site for calculating the habitable zone (HZ) of multiple star systems. Using the concept of spectral weight factor, as introduced in our previous studies of the calculations of HZ in and around binary star systems, we calculate the contribution of each star (based on its spectral energy distribution) to the total flux received at the top of the atmosphere of an Earth-like planet, and use the models of the HZ of the Sun to determine the boundaries of the HZ in multiple star systems. Our interactive Web site for carrying out these calculations is publicly available at http://astro.twam.info/hz. We discuss the details of our methodology and present its application to some of the multiple star systems detected by the Kepler space telescope. We also present the instructions for using our interactive Web site, and demonstrate its capabilities by calculating the HZ for two interesting analytical solutions of the three-body problem.

79 ASTRONOMY AND ASTROPHYSICS↗

Field-induced canting of magnetic moments in GdCo 5 at finite temperature: first-principles calculations and high-field measurements

Here, we present calculations and experimental measurements of the temperature-dependent magnetization of a single crystal of GdCo 5 in magnetic fields of order 60 T. At zero temperature the calculations, based on density-functional theory in the disordered-local-moment picture, predict a field-induced transition from an antiferromagnetic to a canted alignment of Gd and Co moments at 46.1 T. At higher temperatures the calculations find this critical field to increase along with the zero-field magnetization. The experimental measurements observe this transition to occur between 44-48 T at 1.4 K. Up to temperatures of at least 100 K, the experiments continue to observe the transition; however, at variance with the calculations, no strong temperature dependence of the critical field is apparent. We assign this difference to the inaccurate description of the zero-field magnetization of the calculations at low temperatures, due to the use of classical statistical mechanics. Correcting for this effect, we recover a consistent description of the high-field magnetization of GdCo 5 from theory and experiment.

36 MATERIALS SCIENCE↗

Benchmark of correlation matrix renormalization method in molecule calculations

In this paper, we report benchmark calculations of the correlation matrix renormalization (CMR) approach for 23 molecules in the well-established G2 molecule set. This subset represents molecules with spin-singlet ground state in a variety of chemical bonding and coordination environments. The QUAsi-atomic minimal basis-set orbitals (QUAMBOs) are used as local orbitals in both CMR and full configuration interaction (FCI) calculations for comparison. The results obtained from the calculations are also compared with available experimental data. It is shown that the CMR method produces binding and dissociation energy curves in good agreement with the QUAMBO-FCI calculations as well as experimental results. Finally, the CMR benchmark calculations yield a standard deviation of 0.09 Å for the equilibrium bond length and 0.018 Hartree/atom for the formation energy, with a gain of great computational efficiency which scales like Hartree–Fock method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Orbital-resolved calculations of two-center interferences in linear triatomic molecules

In this report we perform ab initio calculations of high-harmonic spectroscopy (HHS) of two-center interference phenomena in oriented carbon-dichalcogen molecules, using time-dependent density functional theory (TDDFT). We show that by resolving the harmonic response into contributions from individual Kohn-Sham orbitals, we can extract target-specific characteristics for both the spectral amplitude and phase. We also discuss that this extraction is predicated on a careful analysis and normalization of the harmonic spectrum. Finally, we present field-free scattering calculations that mimic the recollision step in high-order-harmonic generation and allow the calculation of recombination dipole matrix elements without explicitly calculating the scattering states of a molecule. We show that the orbital-resolved TDDFT HHS results and results based on our field-free scattering calculations are in very good agreement with each other.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comment on 'Discrepancies in the resonance-fluorescence spectrum calculated with two methods'

There are two alternative methods used in the literature to calculate the incoherent part of the spectrum of light scattered by an atomic system. In the first, one calculates the spectrum of the total light scattered by the system and obtains the incoherent part by subtracting the coherent part. In the second method, one introduces the fluctuation operators and obtains the incoherent part of the spectrum by taking the Fourier transform of the two-time correlation function of the fluctuation operators. These two methods have been recognized for years as completely equivalent for evaluating the incoherent part of the spectrum. In a recent paper, Xu et al. [Phys. Rev. A 78, 013407 (2008)] showed that there are discrepancies between the incoherent parts of the stationary spectrum of a three-level {lambda}-type system calculated with these two methods. The predicted discrepancies can be severe that over a wide range of the Rabi frequencies and atomic decay rates, the spectrum calculated with the variance method can have negative values. In this Comment, we show that there are no discrepancies between these two methods. We show the equivalence of these two methods that leads to the same incoherent spectra which are positive for all frequencies independent of values of the parameters involved. We also identify the source of the discrepancy, that is, in an incorrect treatment of the incoherent part of the spectrum calculated with the two-time correlation function of the fluctuation operators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fock-space relativistic coupled-cluster calculations of two-valence atoms

We have developed an all-particle Fock-space relativistic coupled-cluster method for two-valence atomic systems. We then describe a scheme to employ the coupled-cluster wave function to calculate atomic properties. Based on these developments we calculate the excitation energies, magnetic hyperfine structure constants, and electric dipole matrix elements of Sr, Ba, and Yb. Furthermore, we calculate the electric quadrupole hyperfine structure constants and the electric dipole matrix elements of Sr{sup +}, Ba{sup +}, and Yb{sup +}. For these we use the one-valence coupled-cluster wave functions obtained as an intermediate in the two-valence calculations. We also calculate the magnetic dipole hyperfine structure constants of Yb{sup +}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First-principles electronic structure in second-moment calculation of mode frequencies: Failure of quasiharmonic approximation in silicon

Using first-principles electronic structure calculations (local density approximation), we present second-moment calculations of the temperature dependence of the vibrational normal mode frequencies in Si up to 1500 K . The method is based on simple ensemble averages of displacements and forces and is easy to implement. These efficient calculations incorporate all interactions nonperturbatively, implicitly including all high order force constants, in contrast to typical perturbative approaches. Also in this work, we propose and apply to our classical calculations an estimated quantum correction that could be used for classical approaches other than the moments method. We compare our results to available experiments, including recent inelastic neutron scattering data and conclude that the second-moment gives the frequency shift to within a factor of 2 in contrast to quasiharmonic approaches that fail by an order of magnitude to predict the anharmonic shift. Noting the relative simplicity and speed of the calculations, we conclude that the second-moment approximation reasonably accounts for anharmonicity in a system that has been very closely studied experimentally and may reliably be applied in an exploratory way to more complex systems. Finally, we suggest that further improvement on the results could be obtained by incorporating the fourth moment, which can be implemented with little additional cost.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fully converged plane-wave-based self-consistent G W calculations of periodic solids

The GW approximation is a well-known method to obtain the quasiparticle and spectral properties of systems ranging from molecules to solids. In practice, GW calculations are often employed with many different approximations and truncations. In this work, we describe the implementation of a fully self-consistent GW approach based on the solution of the Dyson equation using a plane wave basis set. Algorithmic, numerical, and technical details of the self-consistent GW approach are presented. The fully self-consistent GW calculations are performed for GaAs, ZnO, and CdS including semicores in the pseudopotentials. No further approximations and truncations apart from the truncation on the plane wave basis set are made in our implementation of the GW calculation. After adopting a special potential technique, a ~100Ry energy cutoff can be used without the loss of accuracy. We found that the self-consistent GW (sc-GW) significantly overestimates the bulk band gaps, and this overestimation is likely due to the underestimation of the macroscopic dielectric constants. On the other hand, the sc-GW accurately predicts the d-state positions, most likely because the d-state screening does not sensitively depend on the macroscopic dielectric constant. Our work indicates the need to include the high-order vertex term in order for the many-body perturbation theory to accurately predict the semiconductor band gaps. Further, it also sheds some light on why, in some cases, the G 0 W 0 bulk calculation is more accurate than the fully self-consistent GW calculation, because the initial density-functional theory has a better dielectric constant compared to experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗