SEARCH · Search NASA

Results for “COUPLING NETWORK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS2024

Sensor Fault Detection in Smart Extraterrestrial Habitats Using Unsupervised Learning

Various types of sensors are needed to monitor the health state of smart deep-space habitats. However, measured data can be affected by sensor faults, which influence the health management system and consequently the decision-making. In this paper, an unsupervised learning approach based on convolutional autoencoders (CAEs) is developed to detect anomalies in temperature and pressure sensors. The proposed method is systematically investigated using a habitat simulator (HabSim). Several illustrative examples are demonstrated in the nominal and hazardous states of the habitat, including micrometeorite impact and fire scenarios. The performance of the proposed method using CAEs is compared with that of existing methods using auto-associative neural networks (AANNs) and variational autoencoders. This comparison is based on typical evaluation metrics, including precision, recall, F1 score, training time, and testing time. The effect of temperature–pressure coupling on the detection performance of CAEs and AANNs is explored by training different data-driven models, including one with temperature sensors, one with pressure sensors, and one with both temperature and pressure sensors. The effect of the number of faulty sensors on the performance of CAEs is studied, as with an increase in the number of faulty sensors, redundant information among the sensors is reduced. The capability of CAEs to change the number of sensors without redesigning the network architecture and retraining the neural network is investigated and demonstrated. The capabilities and limitations of the proposed solution are discussed.

Zixin Wang↗

NASA NTRSDate not supplied

Deep Reinforcement Learning based Routing in an Air-to-Air Ad-hoc Network

This paper studies the Multiple Sources and Multiple Destinations (MSMD) routing problem in a dynamic Air-to-Air Ad-hoc Network (AAAN). We consider a spectrum limited scenario where multiple links have to share the same frequency channel so that co-channel interference becomes inevitable. As a result, routing decisions and spectrum access are coupled and must be jointly considered. This paper proposes a deep Q-learning based algorithm to find an optimal routing and channel selection strategy that minimizes the end-to-end communication delay. Specifically, under the assumption that only local information is available to every node, the Deep Q-Network (DQN) is trained offline to learn the optimal routing and channel selection strategy. After the trained DQN is implemented in every node, multiple relay nodes can simultaneously determine their next-hop relay and channel selections in real-time. Simulation results demonstrate the efficacy of our proposed algorithm.

AAAN↗

NASA NTRSDate not supplied

Deep Reinforcement Learning based Routing in an Air-to-Air Ad-hoc Network

AAAN↗

DOE OSTI2022

Multilevel Analysis, Design, and Modeling of Coupling Advanced Nuclear Reactors and Thermal Energy Storage in an Integrated Energy System

This report discusses the different options for coupling thermal energy storage (TES) systems to advanced nuclear power plants (A-NPPs) in order to enable flexible and hybrid plant operation. An advanced light-water reactor (A LWR), a high-temperature gas-cooled reactor (HTGR) and a liquid-metal fast reactor (LMFR) were selected as the initial use cases for demonstrating a thermally balanced energy storage coupling design for thermal power extraction. The models presented herein showcase several design considerations, focusing on optimal deployment methodologies for achieving steady-state and transient-state operation with minimum disruption to the nuclear power cycle. This first part of the study presents steady-state models developed using Aspen HYSYS®, with the thermal energy bypass for NPP-TES coupling being varied at up to 50%. The various components were sized using the Aspen Process Economic Analyzer (APEA) and Aspen Exchanger Design and Rating (EDR), when applicable. Cost functions from these models were developed using the latest publicly available data obtained from APEA V11. The TES-coupled A-NPP steady-state models and cost functions then provided a baseline for dynamic operation and process optimization by using Idaho National Laboratory (INL)’s Framework for Optimization of Resources and Economics (FORCE) tools. A stochastic optimization of the various energy storage systems coupled to the A-NPPs was then performed using the Risk Analysis Virtual Environment (RAVEN) and its dispatch optimization plugin, the Holistic Energy Resource Optimization Network (HERON). The signal processing and synthetic history capabilities of RAVEN were used to account for the unpredictable behavior of electricity markets. An autoregressive moving average (ARMA) model was used to analyze price signals from the Pennsylvania-New Jersey-Maryland (PJM) market and were applied to the HERON analysis in order to optimize a system with the best economics. Transient modeling evaluation was then performed using Modelica models within the HYBRID repository, which was developed at INL for the Department of Energy Integrated Energy Systems program for the characterization of dynamic integrated system behavior and feedback. This includes evaluation of the TES-coupled A-LWR systems’ impact on physical and thermal system response during imposed system demands. Additional TES-coupled reactor types, coupling approaches, markets, and TES technologies will be evaluated in future work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2026

Influence of Rigidity–Hydration Coupling on Size-Dependent Diffusion in Hydrated Polymer Membranes

Selective ion transport in polymer membranes depends critically on how penetrant motion couples to polymer dynamics and hydration. Yet, the mechanistic interplay between polymer rigidity, water content, and penetrant size remains poorly understood, especially in the regime where the penetrant diameter, polymer Kuhn length, and correlation length are comparable. Here, we employ coarse-grained molecular dynamics simulations to systematically investigate penetrant diffusion in hydrated polymer networks across a broad range of water volume fractions, chain rigidities, and penetrant sizes. The results reveal a transition from a decoupled regime, where small penetrants diffuse nearly independently of polymer relaxation, to a coupled regime in which large penetrants require cooperative polymer motion for transport. Increasing polymer rigidity amplifies the sensitivity of diffusivity to hydration, particularly at low water content, leading to pronounced deviations from Stokes−Einstein scaling. Comparison with scaling theories and free-volume models shows that classical nanoparticle-based frameworks fail to capture this intermediate regime. To address this gap, we extend the Yasuda model to incorporate polymer rigidity through a single parameter that quantifies the dynamic contribution of chain stiffness to free-volume fluctuations. The resulting model collapses diffusivity data across all sizes, water contents, and rigidities, providing a unified description of penetrant transport in hydrated polymer matrices. Furthermore, these findings establish polymer rigidity as a key, tunable determinant of diffusion and offer a framework for interpreting size-dependent transport in ion-selective membranes.

diffusion↗

NASA NTRS2019

Retrieval of Liquid Water Cloud Properties from POLDER-3 Measurements Using a Neural Network Ensemble Approach

This paper describes a neural network algorithm for the estimation of liquid water cloud optical properties from the Polarization and Directionality of Earth's Reflectances-3 (POLDER-3) instrument aboard the Polarization & Anisotropy of Reflectances for Atmospheric Sciences coupled with Observations from a Lidar (PARASOL) satellite. The algorithm has been trained on synthetic multi-angle, multi-wavelength measurements of reflectance and polarization and has been applied to the processing of 1 year of POLDER-3 data. Comparisons of the retrieved cloud properties with Moderate Resolution Imaging Spectroradiometer (MODIS) products show that the neural network algorithm has a low bias of around 2 in cloud optical thickness (COT) and between 1 and 2Âµm in the cloud effective radius. Comparisons with existing POLDER-3 datasets suggest that the proposed scheme may have enhanced capabilities for cloud effective radius retrieval, at least over land. An additional feature of the presented algorithm is that it provides COT and effective radius retrievals at the native POLDER-3 Level 1B pixel level.

Di Noia, Antonio↗

DOE OSTI2019

An elementary optical logic circuit for quantum computing: a review

The classical computing has already done wonders with computation, however limitations on speed and security of transmitted information is endorsing novel computation techniques. Quantum computing is expected to resolve complex problems especially for unachievable speed with best possible secure communication. The logic gates for two Quantum bits (qubits) are one of the most important part of information processing in Quantum computing. Although photons are the best candidates for the processing of qubit but they need lots of nonlinear coupling to perform logic operations. Recent developments in the field of integrated optics showing promising signs for the development of Quantum networks and Quantum computation. In this article we have reviewed the technology of handling polarization encoded Qubit to perform logic operations and interconnections of logic circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

A model of thermal creep and annealing in finite domains based on coupled dislocation climb and vacancy diffusion

Here, we develop a framework to investigate thermal creep and annealing in finite domains, where the climb motion of discrete dislocations is coupled to the diffusion of a continuum vacancy field. The model is first formulated in a continuum finite-deformation setting. All governing equations and boundary conditions are obtained from a unified irreversible thermodynamics principle. The resulting model couples a mechanical boundary value problem (BVP), a vacancy diffusion BVP, and the climb and glide motion of the discrete dislocation network within the crystal. The framework is then linearized for implementation in three-dimensional (3D) discrete dislocation dynamics (DDD) simulations for arbitrary anisotropic crystals. A solution scheme is developed based on the superposition principle, which is imposed weakly on the dislocation network to obtain a Galerkin solution for the nodal climb velocities. The framework includes diffusional (Nabarro–Herring) creep deformation as well as dislocation creep by climb-assisted-glide. The method is applied to simulate the annealing of vacancy loops in Al, with good agreement to experimental measurements by Silcox and Hirsch. We further consider the effects of annealing under stress, and of the proximity of the vacancy loops to loaded and free boundaries Simulations in polycrystalline materials are carried out to highlight the effects of the grain size on dislocation climb and vacancy loop annealing. The method is also applied to estimate the creep rate due to climb-assisted glide of jogged-screw dislocations in γ-TiAl, and results are compared to experiments by Viswanathan et al. Finally, we discuss the effects of uniaxial and hydrostatic stresses on the two diffusive deformation pathways of the material, namely Nabarro–Herring creep and dislocation climb.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Weak-Bonding Elements Lead to High Thermoelectric Performance in BaSnS 3 and SrSnS 3 : A First-Principles Study

SnS2, an earth-abundant and ecofriendly material, is limited as a thermoelectric material because of the high lattice thermal conductivity κ L and low carrier mobility μ. By introducing weak-bonding elements Ba or Sr into the SnS 2 framework, we discovered two SnS 2 -based materials BaSnS3 and SrSnS3 with the calculated low κL values of 0.15 and 0.17 W m -1 K -1 , respectively, along the a-axis. The low group velocity and high lattice anharmonicity originating from the weakened and distorted Sn–S bonding network are found in both systems. Moreover, the vibrations of Ba and Sr induce low-lying optical phonons, which strongly couple with the acoustic phonons and strengthen the phonon scattering rates. Compared to SnS 2 , both compounds present lower single-band effective masses, smaller deformation potential constants, and better band convergence, which enhance μ with an insignificantly reduced effective mass. By solving the linearized Boltzmann transport equation with a nonempirical carrier lifetime, we predict excellent ZT values of 2.89 and 2.77 along the a-axis at 900 K in BaSnS 3 and SrSnS 3 , respectively. Further phase diagram calculations of Ba 1–x Sr x SnS 3 solid solutions propose a new compound, Ba 0.5 Sr 0.5 SnS 3 , with an even higher ZT of 3.0. Our work analyzes explicitly how weak-bonding elements enhance μ and suppress κL simultaneously in SnS 2 -analogous systems with a series of compounds nominated as potential high-performance thermoelectric materials.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Automation and machine learning drive rapid optimization of isoprenol production in Pseudomonas putida

Advances in genome engineering have improved our ability to perturb microbial metabolic networks, yet bioproduction campaigns often struggle with parsing complex metabolic datasets to efficiently enhance product titers. We address this challenge by coupling laboratory automation with machine learning to systematically optimize the production of isoprenol, a sustainable aviation fuel precursor, in Pseudomonas putida. The simultaneous downregulation through CRISPR interference of combinations of up to four gene targets, guided by machine learning, permitted us to increase isoprenol titer 5-fold in six consecutive design-build-test-learn cycles. Moreover, machine learning enabled us to swiftly explore a vast experimental design space of 800,000 possible combinations by strategically recommending approximately 400 priority constructs. High-throughput proteomics allowed us to validate CRISPRi downregulation and identify biological mechanisms driving production increases. Our work demonstrates that ML-driven automated design-build-test-learn cycles, when combined with rigorous data validation, can rapidly enhance titers without specific biological knowledge, suggesting that it can be applied to any host, product, or pathway.

Carruthers, David N↗

DOE OSTI2022

High-efficiency microwave-optical quantum transduction based on a cavity electro-optic superconducting system with long coherence time

Abstract Frequency conversion between microwave and optical photons is a key enabling technology to create links between superconducting quantum processors and to realize distributed quantum networks. We propose a microwave-optical transduction platform based on long-coherence time superconducting radio-frequency (SRF) cavities coupled to electro-optic optical cavities to mitigate the loss mechanisms that limit the attainment of high conversion efficiency. We optimize the microwave-optical field overlap and optical coupling losses in the design while achieving long microwave and optical photon lifetime at milli-Kelvin temperatures. This represents a significant enhancement of the transduction efficiency up to 50% under incoming pump power of 140 μW, which allows the conversion of few-photon quantum signals. Furthermore, this scheme exhibits high resolution for optically reading out the dispersive shift induced by a superconducting transmon qubit coupled to the SRF cavity. We also show that low microwave losses enhance the fidelity of heralded entanglement generation between two remote quantum systems. Finally, high precision in quantum sensing can be reached below the standard quantum limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2019

Recovering the microseismic response from a geomechanical simulation

The assessment of microseismic events is one of a few tools available for characterizing processes that occur within the subsurface. Here, we have developed a method for modeling microseismic activity in the subsurface that allows us to model microseismic events at the reservoir scale. By embedding this method in a fully coupled hydromechanical numerical code, we simulate the development of hydraulic fractures in an unconventional reservoir with an explicitly represented discrete fracture network for a relatively simple synthetic model and a more complicated model based upon field observations. The findings demonstrate that the model can be effectively calibrated against measured microseismic activity, and it can be used to make predictions regarding the timing, location, and amplitude of events in the subsurface.

58 GEOSCIENCES↗

DOE OSTI2023

Streaming Readout and Remote Compute

Streaming Readout Data Acquisition systems coupled with distributed resources spread over vast geographic distances present new challenges to the next generation of experiments. High bandwidth modern network connectivity opens the possibility to utilize large, general-use, HTC systems that are not necessarily located close to the experiment. Near real-time response rates and workflow colocation can provide high reliability solutions to ensure efficient use of beam time. This talk will focus on a few technologies currently being developed at Jefferson Lab and in collaboration with ESnet to support fully streaming DAQ systems.

Lawrence, David↗

NASA NTRS1988

A self-adaptive computational method for transonic turbulent flow past a real projectile

An attempt to develop an effective solution-adaptive computational method for complex unsteady flow problems is reported. The adaptive grid generation technique is critically examined to understand its application to self-adaptive computational procedures. A complex flow problem involving an impulsive Mach 0.96 transonic turbulent flow past a real secant-ogive-cylinder-boattail projectile, including the base flow region at zero angle of attack, is considered. The coupling of the grid generation code to the unsteady Navier-Stokes code makes it possible to generate a new grid network adaptive to the computed solution at every time step.

Hsu, C.-C.↗

NASA NTRS1994

Advanced ground station architecture

This paper describes a new station architecture for NASA's Ground Network (GN). The architecture makes efficient use of emerging technologies to provide dramatic reductions in size, operational complexity, and operational and maintenance costs. The architecture, which is based on recent receiver work sponsored by the Office of Space Communications Advanced Systems Program, allows integration of both GN and Space Network (SN) modes of operation in the same electronics system. It is highly configurable through software and the use of charged coupled device (CCD) technology to provide a wide range of operating modes. Moreover, it affords modularity of features which are optional depending on the application. The resulting system incorporates advanced RF, digital, and remote control technology capable of introducing significant operational, performance, and cost benefits to a variety of NASA communications and tracking applications.

Zillig, David↗

NASA NTRS1995

Broadband Uniplanar Microstrip to Slot-Line Transitions

New in line uniplanar microstrip-to-slotline transitions for MIC/MMIC and phased array slotline antenna applications are described. Such transactions are compact and suitable to be used in an open environment or inside a package or a multichip module. The transitions share the concept of using a balun which consists of two microstrip lines connected to a slotline through a pair of coupled microstrips. The transitions are studied theoretically using the finite difference time domain (FDTD) technique and measured experimentally using an HP8510C Network Analyzer. For a back-to-back configuration, an insertion loss of less than 1.3 dB per transition is achieved over a 40% 3-dB bandwidth with a minimum of 0.6 dB at the design frequency.

Dib, Nihad I.↗

DOE OSTI2022

Flow and transport in three-dimensional discrete fracture matrix models using mimetic finite difference on a conforming multi-dimensional mesh

Here, we present a comprehensive workflow to simulate single-phase flow and transport in fractured porous media using the discrete fracture matrix approach. The workflow has three primary parts: (1) a method for conforming mesh generation of and around a three-dimensional fracture network, (2) the discretization of the governing equations using a second-order mimetic finite difference method, and (3) implementation of numerical methods for high-performance computing environments. A method to create a conforming Delaunay tetrahedralization of the volume surrounding the fracture network, where the triangular cells of the fracture mesh are faces in the volume mesh, that addresses pathological cases which commonly arise and degrade mesh quality is also provided. Our open-source subsurface simulator uses a hierarchy of process kernels (one kernel per physical process) that allows for both strong and weak coupling of the fracture and matrix domains. We provide verification tests based on analytic solutions for flow and transport, as well as numerical convergence. We also provide multiple expositions of the method in complex fracture networks. In the first example, we demonstrate that the method is robust by considering two scenarios where the fracture network acts as a barrier to flow, as the primary pathway, or offers the same resistance as the surrounding matrix. In the second test, flow and transport through a three-dimensional stochastically generated network containing 257 fractures is presented.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS2015

Utilization of the Deep Space Atomic Clock for Europa Gravitational Tide Recovery

Estimation of Europa's gravitational tide can provide strong evidence of the existence of a subsurface liquid ocean. Due to limited close approach tracking data, a Europa flyby mission suffers strong coupling between the gravity solution quality and tracking data quantity and quality. This work explores utilizing Low Gain Antennas with the Deep Space Atomic Clock (DSAC) to provide abundant high accuracy uplink-only radiometric tracking data. DSAC's performance, expected to exhibit an Allan Deviation of less than 3e-15 at one day, provides long-term stability and accuracy on par with the Deep Space Network ground clocks, enabling one-way radiometric tracking data with accuracy equivalent to that of its two-way counterpart. The feasibility of uplink-only Doppler tracking via the coupling of LGAs and DSAC and the expected Doppler data quality are presented. Violations of the Kalman filter's linearization assumptions when state perturbations are included in the flyby analysis results in poor determination of the Europa gravitational tide parameters. B-plane targeting constraints are statistically determined, and a solution to the linearization issues via pre-flyby approach orbit determination is proposed and demonstrated.

Seubert, Jill↗