Search NASA⌕ Search

SEARCH · Search NASA

Results for “Charging Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Multi-Level Kondo Effect and Enhanced Critical Temperature in Nanoscale Granular Al

The normal state conductance of high resistivity granular Al films, having an enhanced critical temperature above 3 K, shows a non-monotonous temperature dependence. Upon cooling the conductance first increases, reaches a broad maximum, then decreases, and finally increases sharply again at low temperatures. This behavior bears a striking resemblance to that predicted for the conductance of quantum dots in a regime where the broadening of discrete energy levels, due to coupling of the dot to the leads reservoirs, is larger than the level separation. In this regime, a multi-level Kondo temperature can be larger than the effective Coulomb charging energy, leading to a metallic-like behavior at high temperatures. This is followed by a Coulomb dominated regime, while at yet lower temperatures, the single level Kondo behavior can be recovered. We believe that this multi-level Kondo resonance model for single dots may apply to our 3D network of nanoscale grains. The multi-level resonance prevents the insulating state from setting-in already at high temperatures, which is favorable for superconductivity. This interpretation of the experimental conductance data is in line with the previously reported presence of magnetic moments in these films. High-resolution electron microscopy shows that intergrain coupling can take place through atomic size Sharvin contacts, which is consistent with the typical values of the intergrain resistance of the films as the metal to insulator transition is approached.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative Analysis of Model Predictive Control and MPC-Informed Rule-Based Control for Thermal Storage Operation in Ultra-Low Temperature 4th Generation District Heating Networks

The integration of thermal storage and heat pumps in district heating networks (DHNs) can significantly enhance operational flexibility and energy efficiency; however, the practical deployment of advanced control strategies is often hindered by forecasting requirements and computational complexity. This study presents a comparative analysis of thermal storage control strategies in an ultra-low-temperature fourth-generation DHN, focusing on the development of a simplified rule-based control (RBC) explicitly informed by Model Predictive Control (MPC) behavior. The proposed methodology systematically analyzes the charging and discharging decisions of an MPC-controlled system under ideal forecasting conditions and extracts recurrent control patterns as a function of key system variables, including outdoor temperature, thermal demand, and electricity price. These patterns are translated into a set of structured time- and condition-based rules, resulting in an MPC-informed RBC that embeds predictive insights while preserving implementation simplicity and operational transparency. The approach is validated on a realistic mixed-use urban district in Denver, Colorado, USA, equipped with a centralized air-source heat pump, distributed water-to-water heat pumps, and a central thermal storage unit. Results show that the tuned RBC attains approximately 96% of ideal MPC economic performance (-27% of costs), preserves values of technical and environmental indicators (reduction only of 2-3%), and substantially reduces complexity. Sensitivity analyses further demonstrate the robustness of the RBC under varying operational conditions (i.e., ambient temperature, electricity price). Overall, the study demonstrates that MPC-informed rule-based control represents an effective trade-off between control performance and real-world applicability, enabling the integration of additional system components while maintaining simplicity, robustness, and ease of implementation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effect of Fe and Co doping on electrical and thermal properties of La{sub 0.5}Ce{sub 0.5}Mn{sub 1−x}(Fe, Co){sub x}O{sub 3} manganites

Graphical abstract: - Highlights: • Low temperature resistivity minimum contributes to Coulomb and Kondo scattering. • Metallic resistivity shows electron, magnon and phonon scattering are significant. • At high temperatures small polaron conduction mechanism is viable. • Susceptibility measurements show ferromagnetic–paramagnetic transition. - Abstract: The effect of Fe and Co doping on structural, electrical and thermal properties of half doped La{sub 0.5}Ce{sub 0.5}Mn{sub 1−x}(Fe, Co){sub x}O{sub 3} is investigated. The structure of these crystallizes in to orthorhombically distorted perovskite structure. The electrical resistivity of La{sub 0.5}Ce{sub 0.5}MnO{sub 3} exhibits metal-semiconductor transition (T{sub MS} at ∼225 K). However, La{sub 0.5}Ce{sub 0.5}Mn{sub 1−x}TM{sub x}O{sub 3} (TM = Fe, Co; 0.0 ≤ x ≤ 0.1) manganites show semiconducting behavior. The thermopower measurements infer hole as charge carriers and electron–magnon as well spin wave fluctuation mechanism are effective at low temperature domain and SPC model fits the observed data at high temperature. The magnetic susceptibility measurement confirms a transition from paramagnetic to ferromagnetic phase. The observed peaks in the specific heat measurements, shifts to lower temperatures and becomes progressively broader with doping of transition metals on Mn-site. The thermal conductivity is measured in the temperature range of 10–350 K with a magnitude in between 10 and 80 mW/cm K.

36 MATERIALS SCIENCE↗

Reversible Adhesion with Polyelectrolyte Brushes Tailored via the Uptake and Release of Trivalent Lanthanum Ions

Applications of end-tethered polyelectrolyte “brushes” to modify solid surfaces have been developed and studied for their colloidal stabilization and high lubrication properties. Current efforts have expanded into biological realms and stimuli-responsive materials. Our work explores responsive and reversible aspects of polyelectrolyte brush behavior when polyelectrolyte chains interact with oppositely charged multivalent ions and complexes, which act as counterions. There is a significant void in the polyelectrolyte literature regarding interactions with multivalent species. This paper demonstrates that interactions between solid surfaces bearing negatively charged polyelectrolyte brushes are highly sensitive to the presence of trivalent lanthanum, La3+. Lanthanum cations have unique interactions with polyelectrolyte chains, in part due to their small size and hydration radius which results in a high local charge density. Using La3+ in conjunction with the surface forces apparatus (SFA), adhesion has been observed to reversibly appear and disappear upon the uptake and release, respectively, of these multivalent cations acting as counterions. In media of fixed ionic strength set by monovalent sodium salt, at I0 = 0.003 M and I0 = 0.3 M, the sign of the interaction forces between overlapping brushes changes from repulsive to attractive when La3+ concentrations reach 0.1 mol % of the total ion concentration. These results are also shown to be generally consistent with, but subtlety different from, previous polyelectrolyte brush experiments using trivalent ruthenium hexamine in the role of the multivalent counterion.

Farina, Robert↗

Delocalization Errors in Density Functional Theory Are Essentially Quadratic in Fractional Occupation Number

Approximate functionals used in practical density functional theory (DFT) deviate from the piecewise linear behavior of the exact functional for fractional charges. This deviation causes excess charge delocalization, which leads to incorrect densities, molecular properties, barrier heights, band gaps, and excitation energies. Here, we present a simple delocalization function for characterizing this error and find it to be almost perfectly linear vs the fractional electron number for systems spanning in size from the H atom to the C 12 H 14 polyene. This causes the delocalization energy error to be a quadratic polynomial in the fractional electron number, which permits us to assess the comparative performance of 47 popular and recent functionals through the curvature. The quadratic form further suggests that information about a single fractional charge is sufficient to eliminate the principal source of delocalization error. Generalizing traditional two-point information like ionization potentials or electron affinities to account for a third, fractional charge-based data point could therefore permit fitting/tuning of functionals with lower delocalization error.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing the Electrode Gravimetric Capacity of Li 1.2 Mn 0.4 Ti 0.4 O 2 Cathode Using Interfacial Carbon Deposition and Carbon Nanotube-Mediated Electrical Percolation

Mn-based cation disordered rocksalt oxides (Mn-DRX) are emerging as promising cathode materials for next-generation Li-ion batteries due to their high specific capacities and cobalt and nickel free characteristic. However, to reach the theoretical capacity, solid-state method synthesized Mn-DRX materials require activation via post-synthetic ball milling, typically incorporating more than 20 wt.% conductive carbon that adversely reduces the electrode level gravimetric capacity. To solve this issue, we firstly deposit amorphous carbon on the surface of the Li 1.2 Mn 0.4 Ti 0.4 O 2 (LMTO) particles to increase the electrical conductivity by a five order of magnitude. Although the cathode material gravimetric first charge capacity reaches 180 mAh/g, its highly irreversible behavior leads to a 70 mAh/g first discharge capacity. Subsequently, to ensure a good electrical percolation network, the LMTO material is ball milled with multi-wall carbon nanotube (CNT) to obtain a 78.7 wt.% LMTO active material loading in the cathode electrode (LMTO-CNT). As a result, a 210 mAh/g cathode electrode gravimetric first charge and 165 mAh/g first discharge capacity are obtained, compared to the respective capacity values of 222 mAh/g and 155 mAh/g for the LMTO ball milled with 20 wt.% SuperP C65 electrode (LMTO-SP). After 50 cycles, the LMTO-CNT delivers a 121 mAh/g electrode gravimetric discharge capacity, largely outperforming the 44 mAh/g value of the LMTO-SP. In conclusion, our study demonstrates that while ball milling is necessary to achieve the theoretical capacity of LMTO, a careful selection of the additive, such as CNT, effectively reduces the required carbon quantity to achieve a higher electrode gravimetric discharge capacity.

25 ENERGY STORAGE↗

Influence of Grafting Density and the Ionic Environment on the Structure of Zwitterionic Brushes

Zwitterionic polymer brushes possess a high potential for applications as surface coatings, e.g., in antifouling applications. Their complex association behavior due to the coexistence of oppositely charged groups on the same monomeric unit allows for a broad variation of polarity, hydrophilicity, and the antipolyelectrolyte effect with the variation of the surrounding environment. In this study, planar polysulfobetaine brushes were investigated with neutron reflectometry (NR) and neutron spin–echo spectroscopy under grazing incidence (GINSES) to explore the brush structure and its inner dynamics perpendicular to the substrate. In particular, the effects of the substrate–initiator system and ionic strength on the structure were investigated with neutron reflectometry and a swelling by a factor of 3–5 was found in the presence of aqueous NaCl and MgCl 2 solutions compared to the dry state. During the data analysis, the applicability of a model-free evaluation was also demonstrated for the investigated polysulfobetaine brushes. Furthermore, it was found with GINSES that in contrast to neutral brushes, these polysulfobetaine brushes do not show the typical concentration fluctuations in the nanosecond time range when partially swollen with salt-free water.

36 MATERIALS SCIENCE↗

Scanning capacitance microscopy of ErAs nanoparticles embedded in GaAs pn junctions

Scanning capacitance microscopy is used to characterize the electronic properties of ErAs nanoparticles embedded in GaAs pn junctions grown by molecular beam epitaxy. Voltage-dependent capacitance images reveal localized variations in subsurface electronic structure near buried ErAs nanoparticles at lateral length scales of 20-30 nm. Numerical modeling indicates that these variations arise from inhomogeneities in charge modulation due to Fermi level pinning behavior associated with the embedded ErAs nanoparticles. Statistical analysis of image data yields an average particle radius of 6-8 nm--well below the direct resolution limit in scanning capacitance microscopy but discernible via analysis of patterns in nanoscale capacitance images.

36 MATERIALS SCIENCE↗

The evidence of cathodic micro-discharges during plasma electrolytic oxidation process

Plasma electrolytic oxidation (PEO) processing of EV31 magnesium alloy has been carried out in fluoride containing electrolyte under bipolar pulse current regime. Unusual PEO cathodic micro-discharges have been observed and investigated. It is shown that the cathodic micro-discharges exhibit a collective intermittent behavior, which is discussed in terms of charge accumulations at the layer/electrolyte and layer/metal interfaces. Optical emission spectroscopy is used to determine the electron density (typ. 10{sup 15} cm{sup −3}) and the electron temperature (typ. 7500 K) while the role of F{sup −} anions on the appearance of cathodic micro-discharges is pointed out.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of the dielectric for the charging dynamics of the dielectric/barrier interface in AlGaN/GaN based metal-insulator-semiconductor structures under forward gate bias stress

The high density of defect states at the dielectric/III-N interface in GaN based metal-insulator-semiconductor structures causes tremendous threshold voltage drifts, ΔV{sub th}, under forward gate bias conditions. A comprehensive study on different dielectric materials, as well as varying dielectric thickness t{sub D} and barrier thickness t{sub B}, is performed using capacitance-voltage analysis. It is revealed that the density of trapped electrons, ΔN{sub it}, scales with the dielectric capacitance under spill-over conditions, i.e., the accumulation of a second electron channel at the dielectric/AlGaN barrier interface. Hence, the density of trapped electrons is defined by the charging of the dielectric capacitance. The scaling behavior of ΔN{sub it} is explained universally by the density of accumulated electrons at the dielectric/III-N interface under spill-over conditions. We conclude that the overall density of interface defects is higher than what can be electrically measured, due to limits set by dielectric breakdown. These findings have a significant impact on the correct interpretation of threshold voltage drift data and are of relevance for the development of normally off and normally on III-N/GaN high electron mobility transistors with gate insulation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin valve effect of the interfacial spin accumulation in yttrium iron garnet/platinum bilayers

We report the spin valve effect in yttrium iron garnet/platinum (YIG/Pt) bilayers. The spin Hall effect (SHE) generates spin accumulation at the YIG/Pt interface and can be opened/closed by magnetization switching in the electrical insulator YIG. The interfacial spin accumulation was measured in both YIG/Pt and YIG/Cu/Pt structures using a planar Hall configuration. The spin valve effect remained, even after a 2 nm thick Cu layer was inserted between the YIG and Pt layers, which aimed to exclude the induced magnetization at the YIG/Pt interface. The transverse Hall voltage and switching field were dependent on the applied charge current density. The origin of this behavior can be explained by the SHE induced torque exerted on the domain wall, caused by the transfer of the spin angular momentum from the spin-polarized current to the YIG magnetic moment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of structural and electrical properties of Lu{sub 2}O{sub 3} and Lu{sub 2}TiO{sub 5} gate dielectrics for α-InGaZnO thin-film transistors

We compared the structural properties and electrical characteristics of high-κ Lu{sub 2}O{sub 3} and Lu{sub 2}TiO{sub 5} gate dielectrics for amorphous indium-gallium-zinc oxide (α-InGaZnO) thin-film transistor (TFT) applications. The Lu{sub 2}O{sub 3} film has a strong Lu{sub 2}O{sub 3} (400) peak in the X-ray diffraction pattern, while the Lu{sub 2}TiO{sub 5} sample shows a relatively weak Lu{sub 2}TiO{sub 5} (102) peak. Atomic force microscopy reveals that the Lu{sub 2}O{sub 3} dielectric exhibits a rougher surface (about three times) than Lu{sub 2}TiO{sub 5} one. In X-ray photoelectron spectroscopy analysis, we found that the intensity of the O 1s peak corresponding to Lu(OH){sub x} for Lu{sub 2}O{sub 3} film was higher than that of Lu{sub 2}TiO{sub 5} film. Furthermore, compared with the Lu{sub 2}O{sub 3} dielectric, the α-InGaZnO TFT using the Lu{sub 2}TiO{sub 5} gate dielectric exhibited a lower threshold voltage (from 0.43 to 0.25 V), a higher I{sub on}/I{sub off} current ratio (from 3.5 × 10{sup 6} to 1.3 × 10{sup 8}), a smaller subthreshold swing (from 276 to 130 mV/decade), and a larger field-effect mobility (from 14.5 to 24.4 cm{sup 2}/V s). These results are probably due to the incorporation of TiO{sub x} into the Lu{sub 2}O{sub 3} film to form a Lu{sub 2}TiO{sub 5} structure featuring a smooth surface, a low moisture absorption, a high dielectric constant, and a low interface state density at the oxide/channel interface. Furthermore, the stability of Lu{sub 2}O{sub 3} and Lu{sub 2}TiO{sub 5} α-InGaZnO TFTs was investigated under positive gate-bias stress (PGBS) and negative gate-bias stress (NGBS). The threshold voltage of the TFT performed under NGBS is more degradation than that under PGBS. This behavior may be attributed to the electron charge trapping at the dielectric–channel interface under PGBS, whereas the oxygen vacancies occurred in the InGaZnO under NGBS.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural defects and recombination behavior of excited carriers in Cu(In,Ga)Se{sub 2} solar cells

The carriers’ behavior in neutral region (NTR) and space charged region (SCR) of Cu(In,Ga)Se{sub 2} thin film based solar cells has been investigated by temperature dependent photoluminescence (PL-T), electroluminescence (EL-T) and current-voltage (IV-T) from 10 to 300 K. PL-T spectra show that three kinds of defects, namely V{sub Se}, In{sub Cu} and (In{sub Cu}+V{sub Cu}), are localized within the band gap of NTR and SCR of CIGS layer, corresponding to the energy levels of E{sub C}-0.08, E{sub C}-0.20 and E{sub C}-0.25 eV, respectively. The In{sub Cu} and (In{sub Cu}+V{sub Cu}) deep level defects are non-radiative recombination centers at room temperature. The IV-T and EL-T analysis reveals that the injection modes of electrons from ZnO conduction band into Cu(In,Ga)Se{sub 2} layer are tunneling, thermally-excited tunneling and thermionic emission under 10-40, 60-160, and 180-300 K, respectively. At 10-160 K, the electrons tunnel into (In{sub Cu}+V{sub Cu}) and V{sub se} defect levels in band gap of SCR and the drifting is involved in the emission bands at 0.96 and 1.07 eV, which is the direct evidence for a tunneling assisted recombination. At 180-300 K, the electrons are directly injected into the Cu(In,Ga)Se{sub 2} conduction band, and the emission of 1.13 eV are ascribed to the transitions from the conduction band to the valence band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Origin of Delicate Antiferromagnetism in Fe 𝑥 ⁢NbS 2

Among the family of intercalated transition-metal dichalcogenides (TMDs), Fe 𝑥 ⁢NbS 2 is found to possess unique current-induced resistive switching behaviors, tunable antiferromagnetic states, and a commensurate charge order, all of which are tied to a critical Fe doping of 𝑥 𝑐 = 1/3. However, the electronic origin of such extreme stoichiometry sensitivities remains unclear. Combining angle-resolved photoemission spectroscopy (ARPES) with density functional theory (DFT) calculations, we identify and characterize a dramatic eV-scale electronic restructuring that occurs across the 𝑥𝑐. Moment-carrying Fe 3⁢𝑑 𝑧 2 electrons manifest as narrow bands within 200 meV of the Fermi level, distinct from other transition metal intercalated TMD magnets. These states strongly hybridize with itinerant electrons in the TMD layer and rapidly lose coherence above 𝑥 𝑐 due to correlation-driven effects. This sudden quasiparticle decoherence collapses the Fe-Nb hybridization, which explicitly suppresses the out-of-plane effective Fe-Fe exchange interaction, driving the transformation of the magnetic ground state from an antiferromagnetic stripe phase to a zigzag phase. Furthermore, these observations resemble the exceptional electronic and magnetic sensitivity of strongly correlated systems, and demonstrate that quantifying orbital-specific hybridization via ARPES offers an alternative pathway to evaluate effective magnetic exchange in metallic magnets, complementing inelastic neutron and resonant x-ray scattering probes.

Angle-resolved photoemission spectroscopy↗

Spin crossovers and superdiffusion in the one-dimensional Hubbard model

We use tools from integrability and generalized hydrodynamics to study finite-temperature dynamics in the one-dimensional Hubbard model. First, we examine charge, spin, and energy transport away from half-filling and zero magnetization, focusing on the strong coupling regime where we identify a rich interplay of temperature and energy scales, with crossovers between distinct dynamical regimes. We identify an intermediate-temperature regime analogous to the spin-incoherent Luttinger liquid, where spin degrees of freedom are hot but charge degrees of freedom are at low temperature. We demonstrate that the spin Drude weight exhibits sharp features at the crossover between this regime and the low-temperature Luttinger liquid regime, which are absent in the charge and energy response, and rationalize this behavior in terms of the properties of Bethe ansatz quasiparticles.We then turn to the dynamics along special lines in the phase diagram corresponding to half-filling and/or zero magnetization where on general grounds we anticipate that the transport is subballistic but superdiffusive. We provide analytical and numerical evidence for Kardar-Parisi-Zhang (KPZ) dynamical scaling (with length and time scales related via x ~ t 2/3 ) along both lines and at the SO(4)-symmetric point where they intersect. Furthermore, our results suggest that both spin-coherence crossovers and KPZ scaling may be accessed in near-term experiments with optical lattice Hubbard emulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological phase transition without single particle gap closing in strongly correlated systems

Here, in this study, we show two models where changing topology does not necessarily close the bulk insulating charge gap as demanded in the standard noninteracting picture. From extensive determinantal and dynamical cluster quantum Monte Carlo simulations of the half-filled and quarter-filled Kane-Mele-Hubbard model, we show that, for sufficiently strong interactions at either half- or quarter-filling, a transition between topological and trivial insulators occurs without the closing of a charge gap. To shed light on this behavior, we illustrate that an exactly solvable model reveals that while the single-particle gap remains, the many-body gap does, in fact, close. These two gaps are the same in the noninteracting system but depart from each other as the interaction turns on. We purport that for interacting systems, the proper probe of topological phase transitions is the closing of the many-body rather than the single-particle gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗