Search NASA⌕ Search

SEARCH · Search NASA

Results for “Descriptive statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

The 3D Heliosphere: What Can We Learn from STEREO?

Many techniques have been used to study the 3D heliosphere, with the earliest probably being the analysis of comet tails. I will list most of these and mention a few, focusing on existing multi-point studies. The result, from more than 50 years of study, Is that a lot is known. This has led to a good picture of the quasi-steady heliosphere and its relation to the 3D Corona. But, there are also some large gaps and STEREO is designed to address one of these: the timing, size, geometry, mass, speed, direction, and 3D propagation of Corona[ mass ejections (CMEs). In spite of the statistical analysis of a large data archive, Imaginative use of in situ and remote measurements, and extensive modeling, these properties of CMES are poorly known. I will outline an example of how STEREO instruments might work together to develop a far better 30 description of CMEs In the 3D heliosphere and note that other examples are described in the Science Definition Team report and in the Science Objectives given by the four instrument teams. Since the two STEREO spacecraft are not intended to work in isolation, I will also outline how they might be used In combination With ground-based and other spacecraft observations.

Suess, S. T.↗

InSight Entry, Descent and Landing Pre-Flight Performance Predictions

On November 26, 2018, the Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) lander successfully touched down on the surface of Mars. Over its seven-plus year development, NASA Langley Research Center’s (LaRC) Program to Optimize Simulated Trajectories II (POST2) was used to assess the mission’s Entry, Descent and Landing (EDL) vehicle system performance against related requirements across the full range of possible environmental and spacecraft conditions. Much of the simulation code was derived from the Phoenix mission, for which this vehicle is very similar. The InSight six degree-of-freedom simulation included models for Mars atmosphere, gravity and digital elevation maps of the landing location. Additionally, vehicle specific aerodynamic, parachute, engine, navigation sensor, flight software and landing radar models were also included. A set of dispersions for each model, as well as for additional simulation input parameters, were also included in order to provide a statistical, Monte Carlo prediction of the EDL system performance. An overview of the pre-flight performance assessments completed, including the various simulation campaigns used, will be provided. Ultimately, this work was critical in the assessment of readiness for InSight launch. A brief description of the use of this simulation in support of flight operations is also discussed.

Robert W Maddock↗

Characterizing PuO 2 Powder at Oak Ridge National Laboratory for the Multi-Lab Plutonium Process Signatures Campaign FY 2022

This report highlights the development of advanced analytical capabilities at Oak Ridge National Laboratory to characterize PuO 2 powder to support the Multi-Lab Plutonium Process Signatures Campaign in FY 2022. Two samples from a batch of 76 statistical precipitation runs were packaged and shipped from Pacific Northwest National Laboratory to Oak Ridge National Laboratory at the beginning of FY 2022. Techniques were used to characterize the sample, including powder X-ray diffraction, Raman spectroscopy, and diffuse reflectance spectroscopy. A brief description of each technique, the results and discussion, and future work are described in this report. Opportunities to expand current capabilities and include additional analytical capabilities for the next campaign will also be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced Space Shuttle simulation model

The effects of atmospheric turbulence in horizontal and near-horizontal flight during the return of the Space Shuttle are important for determining design, control, and pilot-in-the-loop effects. A nonrecursive model (based on vonKarman spectra) for atmospheric turbulence along the flight path of the Shuttle Orbiter has been developed which provides for simulation of instantaneous vertical and horizontal gusts at the vehicle center-of-gravity and also for simulation of instantaneous gust gradients. Based on this model the time series for gusts and gust gradients have been generated and stored on a series of magnetic tapes which are entitled Shuttle Simulation Turbulence Tapes (SSTT). The time series are designed to represent atmospheric turbulence from ground level to an altitude of 120,000 meters. A description of the turbulence generation procedure is provided, the results of validating the simulated turbulence are described, and conclusions and recommendations are presented. Appendices provide tabulated one-dimensional vonKarman spectra, a discussion of the minimum frequency simulated, and the results of spectral and statistical analyses of the SSTT.

Tatom, F. B.↗

Advances in image compression and automatic target recognition; Proceedings of the Meeting, Orlando, FL, Mar. 30, 31, 1989

Various papers on image compression and automatic target recognition are presented. Individual topics addressed include: target cluster detection in cluttered SAR imagery, model-based target recognition using laser radar imagery, Smart Sensor front-end processor for feature extraction of images, object attitude estimation and tracking from a single video sensor, symmetry detection in human vision, analysis of high resolution aerial images for object detection, obscured object recognition for an ATR application, neural networks for adaptive shape tracking, statistical mechanics and pattern recognition, detection of cylinders in aerial range images, moving object tracking using local windows, new transform method for image data compression, quad-tree product vector quantization of images, predictive trellis encoding of imagery, reduced generalized chain code for contour description, compact architecture for a real-time vision system, use of human visibility functions in segmentation coding, color texture analysis and synthesis using Gibbs random fields.

Tescher, Andrew G.↗

Report on Wind Turbine Subsystem Reliability - A Survey of Various Databases (Presentation)

Wind industry has been challenged by premature subsystem/component failures. Various reliability data collection efforts have demonstrated their values in supporting wind turbine reliability and availability research & development and industrial activities. However, most information on these data collection efforts are scattered and not in a centralized place. With the objective of getting updated reliability statistics of wind turbines and/or subsystems so as to benefit future wind reliability and availability activities, this report is put together based on a survey of various reliability databases that are accessible directly or indirectly by NREL. For each database, whenever feasible, a brief description summarizing database population, life span, and data collected is given along with its features & status. Then selective results deemed beneficial to the industry and generated based on the database are highlighted. This report concludes with several observations obtained throughout the survey and several reliability data collection opportunities in the future.

17 WIND ENERGY↗

Data analytics for intermodal freight transportation applications

With the growth of intermodal freight transportation, it is important that transportation planners and decision-makers are knowledgeable about freight flow data to make informed decisions. This is particularly true with Intelligent Transportation Systems (ITS) offering new capabilities for intermodal freight transportation. Specifically, ITS enables access to multiple different data sources, but they have different formats, resolutions, and time scales. Thus, knowledge of data science is essential to be successful in future ITS-enabled intermodal freight transportation systems. This chapter discusses the commonly used descriptive and predictive data analytic techniques in intermodal freight transportation applications. These techniques cover the entire spectrum of univariate, bivariate, and multivariate analyses. In addition to illustrating how to apply these techniques manually, this chapter will also show how to apply them using the statistical software R. Additional exercises are provided for those who wish to apply the described techniques to more complex problems.

Huynh, Nathan↗

Investigating phase transitions from local crystallographic analysis based on statistical learning of atomic environments in 2D MoS 2 -ReS 2

Traditionally, phase transitions are explored using a combination of macroscopic functional characterization and scattering techniques, providing insight into the average properties and symmetries of the lattice but local atomic level mechanisms during phase transitions generally remain unknown. Here, we explore the mechanisms of a phase transition between the trigonal prismatic and distorted octahedral phases of layered chalcogenides in the 2D MoS 2 - ReS 2 system from the observations of local degrees of freedom, namely atomic positions by Scanning Transmission Electron Microscopy (STEM). We employ local crystallographic analysis based on statistical learning of atomic environments to build a picture of the transition from the atomic level up and determine local and global variables controlling the local symmetry breaking. In particular, we argue that the dependence of the average symmetry breaking distortion amplitude on global and local concentration can be used to separate local chemical as well as global electronic effects on transition. This approach allows exploring atomic mechanisms beyond the traditional macroscopic descriptions, utilizing the imaging of compositional fluctuations in solids to explore phase transitions over a range of realized and observed local stoichiometries and atomic configurations.

25 ENERGY STORAGE↗

Nonextensivity and natural time: The case of seismicity

Nonextensive statistical mechanics, pioneered by Tsallis, has recently achieved a generalization of the Gutenberg-Richter law for earthquakes. This remarkable generalization is combined here with natural time analysis, which enables the distinction of two origins of self-similarity, i.e., the process' memory and the process' increments infinite variance. By using also detrended fluctuation analysis for the detection of long-range temporal correlations, we demonstrate the existence of both temporal and magnitude correlations in real seismic data of California and Japan. Natural time analysis reveals that the nonextensivity parameter q, in contrast to some published claims, cannot be considered as a measure of temporal organization, but the Tsallis formulation does achieve a satisfactory description of real seismic data for Japan for q=1.66 when supplemented by long-range temporal correlations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

von Kármán–Howarth and Corrsin equations closure based on Lagrangian description of the fluid motion

A new approach to obtain the closure formulas for the von Kármán–Howarth and Corrsin equations is presented, which is based on the Lagrangian representation of the fluid motion, and on the Liouville theorem associated to the kinematics of a pair of fluid particles. This kinematics is characterized by the finite scale separation vector which is assumed to be statistically independent from the velocity field. Such assumption is justified by the hypothesis of fully developed turbulence and by the property that this vector varies much more rapidly than the velocity field. This formulation leads to the closure formulas of von Kármán–Howarth and Corrsin equations in terms of longitudinal velocity and temperature correlations following a demonstration completely different with respect to the previous works. Some of the properties and the limitations of the closed equations are discussed. In particular, we show that the times of evolution of the developed kinetic energy and temperature spectra are finite quantities which depend on the initial conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On kinetic description of electromagnetic processes in a quantum plasma

A nonlinear kinetic equation for nonrelativistic quantum plasma with electromagnetic interaction of particles is obtained in the Hartree's mean-field approximation. It is cast in a convenient form of Vlasov-Boltzmann-type equation with ''quantum interference integral'', which allows for relatively straightforward modification of existing classical Vlasov codes to incorporate quantum effects (quantum statistics and quantum interference of overlapping particles wave functions), without changing the bulk of the codes. Such modification (upgrade) of existing Vlasov codes may provide a direct and effective path to numerical simulations of nonlinear electrostatic and electromagnetic phenomena in quantum plasmas, especially of processes where kinetic effects are important (e.g., modulational interactions and stimulated scattering phenomena involving plasma modes at short wavelengths or high-order kinetic modes, dynamical screening and interaction of charges in quantum plasma, etc.) Moreover, numerical approaches involving such modified Vlasov codes would provide a useful basis for theoretical analyses of quantum plasmas, as quantum and classical effects can be easily separated there.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pure quantum extension of the semiclassical Boltzmann-Uehling-Uhlenbeck equation

The Boltzmann equation is the traditional framework in which one extends the time-dependent mean field classical description of a many-body system to include the effect of particle-particle collisions in an approximate manner. A semiclassical extension of this approach to quantum many-body systems was suggested by Uehling and Uhlenbeck in 1933 for both Fermi and Bose statistics, and many further developments of this approach are known as the Boltzmann-Uehling-Uhlenbeck (BUU) equations. In this paper I introduce a pure quantum version of the BUU type of equations, which is mathematically equivalent to a generalized time-dependent density functional theory extended to superfluid systems. As expected, during nonequilibrium processes the quantum Boltzmann one-body entropy increases during evolution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Deformation at Finite Temperature

Deformation, a key concept in our understanding of heavy nuclei, is based on a mean-field description that breaks the rotational invariance of the nuclear many-body Hamiltonian. Here, we present a method to analyze nuclear deformations at finite temperature in a framework that preserves rotational invariance. The auxiliary-field Monte-Carlo method is used to generate the statistical ensemble and calculate the probability distribution associated with the quadrupole operator. Applying the technique to nuclei in the rare-earth region, we identify model-independent signatures of deformation and find that deformation effects persist to higher temperatures than the spherical-to-deformed shape phase-transition temperature of mean-field theory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

On the minimax feedback control of uncertain dynamic systems.

In this paper the problem of optimal feedback control of uncertain discrete-time dynamic systems is considered where the uncertain quantities do not have a stochastic description but instead are known to belong to given sets. The problem is converted to a sequential minimax problem and dynamic programming is suggested as a general method for its solution. The notion of a sufficiently informative function, which parallels the notion of a sufficient statistic of stochastic optimal control, is introduced, and conditions under which the optimal controller decomposes into an estimator and an actuator are identified.

Bertsekas, D. P.↗

Sufficiently informative functions and the minimax feedback control of uncertain dynamic systems.

The problem of optimal feedback control of uncertain discrete-time dynamic systems is considered where the uncertain quantities do not have a stochastic description but instead are known to belong to given sets. The problem is converted to a sequential minimax problem and dynamic programming is suggested as a general method for its solution. The notion of a sufficiently informative function, which parallels the notion of a sufficient statistic of stochastic optimal control, is introduced, and conditions under which the optimal controller decomposes into an estimator and an actuator are identified.

Bertsekas, D. P.↗

Advanced Space Shuttle simulation model

A non-recursive model (based on von Karman spectra) for atmospheric turbulence along the flight path of the shuttle orbiter was developed. It provides for simulation of instantaneous vertical and horizontal gusts at the vehicle center-of-gravity, and also for simulation of instantaneous gusts gradients. Based on this model the time series for both gusts and gust gradients were generated and stored on a series of magnetic tapes, entitled Shuttle Simulation Turbulence Tapes (SSTT). The time series are designed to represent atmospheric turbulence from ground level to an altitude of 120,000 meters. A description of the turbulence generation procedure is provided. The results of validating the simulated turbulence are described. Conclusions and recommendations are presented. One-dimensional von Karman spectra are tabulated, while a discussion of the minimum frequency simulated is provided. The results of spectral and statistical analyses of the SSTT are presented.

Tatom, F. B.↗

Monolithic ceramic analysis using the SCARE program

The Structural Ceramics Analysis and Reliability Evaluation (SCARE) computer program calculates the fast fracture reliability of monolithic ceramic components. The code is a post-processor to the MSC/NASTRAN general purpose finite element program. The SCARE program automatically accepts the MSC/NASTRAN output necessary to compute reliability. This includes element stresses, temperatures, volumes, and areas. The SCARE program computes two-parameter Weibull strength distributions from input fracture data for both volume and surface flaws. The distributions can then be used to calculate the reliability of geometrically complex components subjected to multiaxial stress states. Several fracture criteria and flaw types are available for selection by the user, including out-of-plane crack extension theories. The theoretical basis for the reliability calculations was proposed by Batdorf. These models combine linear elastic fracture mechanics (LEFM) with Weibull statistics to provide a mechanistic failure criterion. Other fracture theories included in SCARE are the normal stress averaging technique and the principle of independent action. The objective of this presentation is to summarize these theories, including their limitations and advantages, and to provide a general description of the SCARE program, along with example problems.

Manderscheid, Jane M.↗