Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dilute solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Disperse aqueous systems based on (S)-lysine in a wide range of concentrations and physiologically important temperatures

It was shown for the first time using a complex of physicochemical methods (dynamic and electrophoretic light scattering, nanoparticle tracking analysis, transmission electron and atomic force microscopy, conductometry, pH-metry) that in a temperature range of 25—60 °С (S)-lysine aqueous solutions (1•10{sup –17}—1•10{sup –2} mol L{sup –1}) are disperse systems, where the nature and parameters of the disperse phase change with dilution, which affects the nonmonotonic dependences of the specific conductivity and pH of the system. Nanoassociates hundreds of nanometers in size were found to contain ordered water structures that are responsible for the size and ζ-potential of the disperse phase in the aqueous systems and also participate in the formation of spatially organized systems on the support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption of Myoglobin to Cu(II)-IDA and Ni(II)-IDA Functionalized Langmuir Monolayers: Study of the Protein Layer Structure during the Adsorption Process by Neutron and X-Ray Reflectivity

The structure and orientation of adsorbed myoglobin as directed by metal-histidine complexation at the liquid-film interface was studied as a function of time using neutron and X-ray reflectivity (NR and XR, respectively). In this system, adsorption is due to the interaction between iminodiacetate (IDA)-chelated divalent metal ions Ni(II) and Cu(II) and histidine moieties at the outer surface of the protein. Adsorption was examined under conditions of constant area per lipid molecule at an initial pressure of 40 mN/m. Adsorption occurred over a time period of about 15 h, allowing detailed characterization of the layer structure throughout the process. The layer thickness and the in-plane averaged segment volume fraction were obtained at roughly 40 min intervals by NR. The binding constant of histidine with Cu(II)-IDA is known to be about four times greater than that of histidine with Ni(II)-IDA. The difference in interaction energy led to significant differences in the structure of the adsorbed layer. For Cu(II)-IDA, the thickness of the adsorbed layer at low protein coverage was {le} 20 {angstrom} and the thickness increased almost linearly with increasing coverage to 42 {angstrom}. For Ni(II)-IDA, the thickness at low coverage was 38 {angstrom} and increased gradually with coverage to 47 {angstrom}. The in-plane averaged segment volume fraction of the adsorbed layer independently confirmed a thinner layer at low coverage for Cu(II)-IDA. These structural differences at the early stages are discussed in terms of either different preferred orientations for isolated chains in the two cases or more extensive conformational changes upon adsorption in the case of Cu(II)-IDA. Subphase dilution experiments provided additional insight, indicating that the adsorbed layer was not in equilibrium with the bulk solution even at low coverages for both IDA-chelated metal ions. We conclude that the weight of the evidence favors the interpretation based on more extensive conformational changes upon adsorption to Cu(II)-IDA.

59 BASIC BIOLOGICAL SCIENCES↗

A solution algorithm for fluid–particle flows across all flow regimes

Many fluid–particle flows occurring in nature and in technological applications exhibit large variations in the local particle volume fraction. For example, in circulating fluidized beds there are regions where the particles are closepacked as well as very dilute regions where particle–particle collisions are rare. Thus, in order to simulate such fluid–particle systems, it is necessary to design a flow solver that can accurately treat all flow regimes occurring simultaneously in the same flow domain. In this work, a solution algorithm is proposed for this purpose. The algorithm is based on splitting the free-transport flux solver dynamically and locally in the flow. In close-packed to moderately dense regions, a hydrodynamic solver is employed, while in dilute to very dilute regions a kinetic-based finite-volume solver is used in conjunction with quadrature-based moment methods. To illustrate the accuracy and robustness of the proposed solution algorithm, it is implemented in OpenFOAM for particle velocity moments up to second order, and applied to simulate gravity-driven, gas–particle flows exhibiting cluster-induced turbulence. By varying the average particle volume fraction in the flow domain, it is demonstrated that the flow solver can handle seamlessly all flow regimes present in fluid–particle flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Substitutions into the trigonal bipyramidal site of InGaCuO{sub 4}

Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized to understand the influence of the trigonal bipyramidal (TBP) crystallographic M{sup 3+}/Cu{sup 2+} site of the YbFe{sub 2}O{sub 4}-type structure through powder X-ray and neutron diffraction, dielectric and magnetism measurements. The addition of Mg{sup 2+} in the InGaCuO{sub 4} lattice results in a decrease of the dielectric constant, but the dielectric loss is not affected until the concentration of Mg{sup 2+} is above x=0.50. The shift in the diffraction peaks, and subsequently the change in the lattice parameters, cannot be exclusively explained by the change in ionic radii. These results show the first observation of the reduction in axial bond lengths for TBP Cu{sup 2+} in a YbFe{sub 2}O{sub 4}-type crystal lattice. - Graphical abstract: Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized and analyzed with powder X-ray and neutron diffraction, dielectric and magnetism measurements. A shift in the lattice parameters that cannot be explained by the change in ionic radii is addressed through a study of the trigonal bipyramidal site. Highlights: Black-Right-Pointing-Pointer Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized. Black-Right-Pointing-Pointer The observed dielectric properties decreased with the dilution of Cu{sup 2+}. Black-Right-Pointing-Pointer Antiferromagnetic interactions, without ordering, were observed in InGaCu{sub 1-x}Mg{sub x}O{sub 4}. Black-Right-Pointing-Pointer A reduction in the axial TBP bond lengths produced a large change in the c/a ratio. Black-Right-Pointing-Pointer Orbital overlap across the TBP layers greatly affected the observed properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

HT-solution growth and characterisation of In{sub x}Na{sub x}Mn{sub 1-2x}WO{sub 4} (0<x≤0.26)

A new solid solution system, In{sub x}Na{sub x}Mn{sub 1–2x}WO{sub 4} (0<x=≤0.26) belonging to the MnWO{sub 4}-type multiferroics was investigated. Large single crystals were grown up to several mm in length from high-temperature oxide solutions using a solvent mixture of Na{sub 2}WO{sub 4} and Na{sub 2}W{sub 2}O{sub 7}. Quantitative doping degrees were analyzed by means of electron microprobe. Single crystal X-ray diffraction studies agreed with the polar space group P2 for In{sub x}Na{sub x}Mn{sub 1–2x}WO{sub 4}. The complexity of partial (Na{sup +}/Mn{sup 2+})- and (In{sup 3+}/Mn{sup 2+})-ordering makes their atomic sites unique, explaining the dissymmetrization from P2/c down to P2. This is also valid for the InNaW{sub 2}O{sub 8}-type Mn{sub 2y}In{sub 1-y}Na{sub 1-y}W{sub 2}O{sub 8} solid solution found as co-product in this study. Specific heat and magnetisation measurements showed a paramagnetic dilution effect from (In{sup 3+}/Na{sup +})-doping while lowering the transition temperature for the multiferroic phase AF2 of In{sub x}Na{sub x}Mn{sub 1–2x}WO{sub 4} with respect to the prototype MnWO{sub 4}. - Graphical abstract: A volume expansion around Mn2 site by (In, Na)-doping is drawn by the atomic shifts in a Mn2O{sub 6} octahedron in the atomistic structure of In{sub 0.20(2)}Na{sub 0.17(2)}Mn{sub 0.63(4)}WO{sub 4} from the respective atomic positions of In-free MnWO{sub 4}. The size and direction of arrows are scaled up for indicating the consequent local distortion. - Highlights: • HT solution crystal growth of (In, Na):MnWO{sub 4}-solid-solution compounds. • Polar space group symmetry P2 for their atomistic structures. • Magnetic properties of the multiferroic phase AF2 by (In{sup 3+}, Na{sup +})-doping. • Magnetic phase transitions.

36 MATERIALS SCIENCE↗

Computational alchemy clarifies origins of alloy strengthening

Solid solution strengthening (SSS) is widely used to enhance mechanical properties of metals. Originally developed for dilute alloys, classical SSS theories are presently challenged by the rise of complex concentrated alloys (CCA) with nearly equiatomic compositions. Here, we propose and develop a method of “computational alchemy” in which interatomic interactions are modified to systematically vary two key physical parameters defining SSS - atomic size misfit and elastic stiffness misfit - over a maximally wide range of two misfits. The resulting alchemical alloys are subjected to massive (~10 8 atoms) molecular dynamics (MD) simulations reproducing full complexity of plastic strength response. At variance with prevailing views, stiffness misfit is observed to contribute to SSS on par if not more than size misfit. Furthermore, depending on exactly how two misfits are combined, they result in synergistic (amplification) or antagonistic (compensation) effect on alloy strengthening. Unlike real CCAs in which each component element comes with its own specific size and stiffness, our alchemical model alloys span the space of two misfits continuously revealing trends in alloy strengthening unrecognized so far. Our study demonstrates unique value of intentionally unrealistic models for gaining deep physical insights into material behaviors that are difficult to reveal otherwise.

36 MATERIALS SCIENCE↗

Localized High Concentration Electrolyte Behavior near a Lithium-Metal Anode Surface

Wide-scale practical application of rechargeable lithium-metal batteries remains a significant challenge due to dendrite growth. To overcome this challenge, electrolytes must be designed to allow for the formation of protective solid electrolyte interphase (SEI) layers on the highly reactive lithium-metal anode (LMA) surfaces. Recently, novel localized high-concentration electrolytes (LHCEs) were introduced as a potential solution to enable dendrite-free cycling of LMAs, by using an inert solvent to “dilute” the high concentration electrolytes. Ideally, the diluent itself does not dissolve the salt but is miscible with the solvent to form a localized high concentrated salt/solvent cluster surrounded by the diluent. However, detailed structure and potential surface reactions that may take place in LHCE environment are not yet clear. In this work, we investigated the reactivity of a 1M lithium bis(fluorosulfonyl)imide (LiFSI) in a mixture of dimethoxyethane (DME)/Tris(2,2,2-trifluoroethyl)orthoformate (TFEO) (1:3 by mol) electrolyte near a Li metal surface based on density functional theory and ab-initio molecular dynamics (MD) simulations. Selected liquid interfacial configurations were obtained from classical MD simulasults indicate that when salt and TFEO molecules are close to each other and to the surface, fluorine anions resulting from the fast salt anion decomposition can trigger a cascade of reactions that lead to the decomposition of TFEO. However, if the Li cation is initially solvated by DME and the anion forming a complex, the stability of the anion increases significantly. The Li solvated structure is implied in the LHCE concept; however statistically the larger amount of TFEO molecules suggest also the first scenario leading to TFEO decomposition. Therefore, the broader implication of our simulations is that the defluorination of TFEO may contribute, together with the anion decomposition, to the observed rapid formation of a stable SEI on the surface of the lithium metal; consequently, favorably affecting the stability of LMAs during battery operation.

Zheng, Yu↗

Vitrification of Hanford Tank 241-AP-105 Waste at 7 M Na and Equivalent Simulant

Hanford Site nuclear waste is to be vitrified at the Waste Treatment and Immobilization Plant (WTP), which is a part of the safe and efficient retrieval, treatment, and disposal mission of the U.S. Department of Energy Office of River Protection. Hanford tank 241-AP-105 (referred to herein as AP-105) is one of the initial Hanford radioactive tank wastes planned to be processed and vitrified. A portion of AP-105 waste was retrieved by Washington River Protection Solutions, LLC (WRPS) and transferred to Pacific Northwest National Laboratory (PNNL). The waste went through dilution by Columbia River water to reach a target sodium (Na) concentration of 7 M, solids filtration, and cesium removal by ion exchange. A glass composition was calculated from the Kim et al. glass models to satisfy the WTP baseline requirements based on the as-received sample and the target dilution to 7 M, from which a simulant was calculated and glass forming chemical (GFC) additions were determined to form a liquid/solids mixture called melter feed. To prepare for the processing of the 7 M Na AP-105 waste melter feed and learn about the production expectations, the melter feed simulant of 7 M Na AP-105 waste was processed in a non-radioactive, continuous laboratory-scale melter (CLSM) system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Properties of Pertechnic Acid

Dilute aqueous pertechnic acid has long been known as a strong monoprotic acid which behaves as simple pertechnetate ion in aqueous solution. As pertechnic acid concentrates by evaporation, it becomes yellow and then dark red, and dark red crystalline material may ultimately be obtained. We show that as pertechnic acid concentrates, at least three compounds are formed – a yellow viscous liquid, a colorless (not red) crystalline solid, and a small amount of an intensely colored red-purple compound. The colorless crystalline compound melts at 118° C and can be melted and recrystallized several times with little decomposition. The red-purple compound is apparently not stable at room temperature and quickly decomposes if it is isolated. UV-Vis spectra show that Beer’s law does not hold as pertechnic acid concentrates by evaporation. We report densities, 99Tc nuclear magnetic resonance spectra, and ultraviolet-visible absorption spectra for highly pure aqueous pertechnic acid (accompanied by the other technetium compounds that form) ranging from 1 to 14 M in technetium concentration.

99Tc, pertechnic acid, technetium, pertechnetate↗

{beta}-connectin studies by small-angle x-ray scattering and single-molecule force spectroscopy by atomic force microscopy

The three-dimensional structure and the mechanical properties of a {beta}-connectin fragment from human cardiac muscle, belonging to the I band, from I{sub 27} to I{sub 34}, were investigated by small-angle x-ray scattering (SAXS) and single-molecule force spectroscopy (SMFS). This molecule presents an entropic elasticity behavior, associated to globular domain unfolding, that has been widely studied in the last 10 years. In addition, atomic force microscopy based SMFS experiments suggest that this molecule has an additional elastic regime, for low forces, probably associated to tertiary structure remodeling. From a structural point of view, this behavior is a mark of the fact that the eight domains in the I{sub 27}-I{sub 34} fragment are not independent and they organize in solution, assuming a well-defined three-dimensional structure. This hypothesis has been confirmed by SAXS scattering, both on a diluted and a concentrated sample. Two different models were used to fit the SAXS curves: one assuming a globular shape and one corresponding to an elongated conformation, both coupled with a Coulomb repulsion potential to take into account the protein-protein interaction. Due to the predominance of the structure factor, the effective shape of the protein in solution could not be clearly disclosed. By performing SMFS by atomic force microscopy, mechanical unfolding properties were investigated. Typical sawtooth profiles were obtained and the rupture force of each unfolding domain was estimated. By fitting a wormlike chain model to each peak of the sawtooth profile, the entropic elasticity of octamer was described.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of surface relaxation on solute atoms positioning within atom probe tomography reconstructions

Highlights: • APT measurement of Al/Cu alloy is simulated with a combined electrostatics and molecular dynamics (MD) approach. • Results show segregation of dilute Cu at [111] poles in correspondence to experimental measurements. • No temperature is involved. The effect originates in both disparate evaporation field and bond-energies in the alloy. While thermal or field-induced surface migration has been invoked often in past literature to rationalize the experimental observations of solute and impurity atoms segregation to specific poles and zones lines in atom probe tomography (APT) reconstructions, it does not satisfactorily explain all experimental results. Using a combined finite-element and molecular dynamics simulation approach that models the field evaporation process from mechanically relaxed emitter structures, we show that an additional mechanism, athermal relaxation, can also drive significant solute migration. The mechanism is illustrated for Cu in solid solution in Al, which exhibits segregation of Cu to 111 poles and along [110] zone lines in reconstructed APT data. The higher bonding energy of Cu atoms on the surface, confirmed using density-functional theory calculations, causes longer retention on the surface and preferential evaporation of neighboring Al atoms with subsequent athermal relaxation of Cu into higher-neighbor-count sites left vacant by evaporating Al neighbors. This in turn results in barrier-free long-range migration of the Cu atoms by a series of relaxation events that follow the receding terrace ledges towards high-neighbor count poles and zone lines. This mechanism fundamentally limits spatial resolution in the limit of zero temperature.

36 MATERIALS SCIENCE↗

Performance Evaluation of the CHKED Multi-Elemental Analysis and Software

The Hybrid K-edge Densitometer (HKED) is a high precision safeguards assay system developed by Ottmar and Eberle [1] for quantification of the U and Pu concentrations of dissolver solutions in spent nuclear fuel reprocessing. The HKED measurement supplements traditional destructive assay methods such as Isotope Dilution Mass Spectrometry (IDMS) and is an essential component of the international safeguards program implementation at these facilities. The Canberra Hybrid K-Edge Densitometry (CHKED) software was recently developed by Canberra Industries to better address the changing composition of the nuclear fuel cycle by addition of a multi-elemental analysis capability to the K-Edge transmission measurement. Our evaluation of the CHKED software was performed at the request of the International Atomic Energy Agency (IAEA) to examine the functionality and performance of the CHKED software and algorithms and identify potential areas for improvement of the software. The reader is assumed to be familiar with the HKED technique and its current implementation in safeguards assay of U and Pu in the nuclear fuel cycle. The Canberra Hybrid K-Edge Densitometry CHKED software replicates functionality of the older VMSbased Hybrid K-Edge Densitometer (HKED) software and incorporates additional analysis algorithms and tools. When the traditional HKED analyses are selected, the CHKED software appears to faithfully reproduce the measurement results as reported by the older software. The CHKED software includes a Multi-elemental K-Edge (MEKED) analysis based in part on algorithms devised at Los Alamos National Laboratory. In principle, the MEKED analysis represents a significant advancement over the traditional HKED analysis, providing a capability to analyze the actinide concentrations from complex solutions, such as low U:Pu ratios (e.g., U:Pu = 1:1) including additional minor actinide components such as Np and Am. However, this MEKED analysis is somewhat limited by reliance on a region of interest (ROI) analysis of the spectrum, the need for extensive calibration measurements and a simplistic interpretation of the KED transmission spectrum. Finally, the MEKED algorithm set associated with the CHKED software (V1.0) acquired by Oak Ridge National Laboratory (ORNL) from Canberra Industries does not seem to be “finished” (e.g., the MEKED analysis seems to only determine measurement results for two actinides with while results for the minor actinides appear to be highly dependent on declaration values).

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

First saturation correction in high energy proton-nucleus collisions. Part II. Single inclusive semi-hard gluon production

Exploiting recently obtained analytic solutions of classical Yang-Mills equations for higher order perturbations in the field of the dilute object (proton), we derive the complete first saturation correction to the single inclusive semi-hard gluon production in high energy proton-nucleus collisions by applying the Lehmann-Symanzik-Zimmermann reduction formula. We thus finalize the program started by Balitsky (see ref. [1]) and independently by Chirilli, Kovchegov and Wertepny (see ref. [2]) albeit using a very different approach to carry out our calculations. We extracted the functional dependence of gluon spectrum on the color charge densities of the colliding objects; thus our results can be used to evaluate complete first saturation correction to the double/multiple inclusive gluon productions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparing Liquid Vortex Capture & the Rapid Droplet Sampling Interface for Single Cell Mass Spectrometry

High-throughput single-cell mass spectrometry is a rapidly evolving field that requires innovative sampling and ionization techniques to balance speed, sensitivity, and reliability for metabolomic and lipidomic analyses. This study provides a comparative analysis of two cutting-edge ionization platforms for single-cell analysis: Liquid Vortex Capture (LVC) and Rapid Droplet Sampling Interface (RDSI). The performance was benchmarked by testing pharmaceuticals, EquiSPLASH, and single-cell experiments. RDSI demonstrated up to 100-fold improvements in sensitivity for drugs and lipids such as propranolol, amiodarone, atorvastatin, and phosphocholines in water and phosphate-buffered solutions. This was attributed to its low-flow rate operation (3 μL/min) and reduced dilution. Conversely, LVC excelled in handling higher liquid volumes with greater reproducibility due to its higher solvent flow rate (200 μL/min), enabling increased dilution, solubility, and cleaning. Single-cell uptake of atorvastatin incubated for 10 min, or amiodarone incubated for 24 h in HepG2 cells, similarly revealed up to 85-fold enhancement in sensitivity by RDSI for drugs and lipids. These findings highlight the potential of RDSI for enhancing sensitivity in single-cell drug monitoring and lipidomics.

Cahill, John [ORNL] (ORCID:0000000298664010)↗

Tuning the antiferromagnetic helical pitch length and nanoscale domain size in Fe 3 PO 4 O 3 by magnetic dilution

The insulating magnetic material Fe 3 PO 4 O 3 features a noncentrosymmetric lattice composed of Fe 3 + triangular units. Frustration, due to competing near-neighbor (J 1 ) and next-nearest-neighbor (J 2 ) antiferromagnetic interactions, was recently suggested to be the origin of an antiferromagnetic helical ground state with unusual needlelike nanoscale magnetic domains in Fe 3 PO 4 O 3 . Magnetic dilution is shown here to tune the ratio of these magnetic interactions, thus providing deeper insight into this unconventional antiferromagnet. Dilution of the Fe 3+ lattice in Fe 3 PO 4 O 3 was accomplished by substituting nonmagnetic Ga 3+ to form the solid solution series Fe 3-x Ga x PO 4 O 3 with x=0.012, 0.06, 0.25, 0.5, 1.0, 1.5. Magnetic susceptibility and neutron powder diffraction data from this series are presented. A continuous decrease of both the helical pitch length and the domain size is observed with increasing dilution up to at least x=0.25, while for x≥0.5, the compounds lack long-range magnetic order entirely. The decrease in the helical pitch length with increasing x can be qualitatively understood by reduction of the ratio of J 2 /J 1 in the Heisenberg model, consistent with mean-field considerations. Intriguingly, the magnetic correlation length in the ab plane remains nearly equal to the pitch length for each value of x≤0.25, showing that the two quantities are intrinsically connected in this unusual antiferromagnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gamma Radiation-Induced Degradation of Acetohydroxamic Acid (AHA) in Aqueous Nitrate and Nitric Acid Solutions Evaluated by Multiscale Modelling

Acetohydroxamic acid (AHA) has been proposed for inclusion in advanced, single-cycle, used nuclear fuel reprocessing solvent systems for the reduction and complexation of plutonium and neptunium ions. For this application, a detailed description of the degradation of AHA in dilute aqueous nitric acid is required. To this end, we present a comprehensive, multiscale computer model for the coupled radiolytic and hydrolytic degradation of AHA in aqueous sodium nitrate and nitric acid solutions. Rate coefficients for the reactions of AHA and HA with the oxidizing nitrate radical were measured for the first time using pulsed electron radiolysis and used as inputs in the kinetic model. The computer model results are validated by comparison to experimental data from steady state gamma irradiations, for which the agreement is excellent. Here, the presented model accurately predicts the yields of the major degradation products of AHA: acetic acid, hydroxylamine, nitrous oxide, and molecular hydrogen.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SU-G-IeP2-12: The Effect of Iterative Reconstruction and CT Tube Voltage On Hounsfield Unit Values of Iodinated Contrast

Purpose: To investigate the effects of changing iterative reconstruction strength and tube voltage on Hounsfield Unit (HU) values of varying concentrations of Iodinated contrast medium in a phantom. Method: Iodinated contrast (Omnipaque 300, GE Healthcare, Princeton NJ) was diluted with distilled water to concentrations of 0.6, 0.9, 1.8, 3.6, 7.2, and 10.8 mg/mL of Iodine. The solutions were scanned in a patient equivalent water phantom on two MDCT scanners: VCT 64 slice (GE Medical Systems, Waukesha, WI) and an Aquilion One 320 slice scanner (Toshiba America Medical Systems, Tustin CA). The phantom was scanned at 80, 100, 120, 140 kV using 400, 255, 180, and 130 mAs, respectively, for the VCT scanner, and 80, 100, 120, and 135 kV using 400, 250, 200, and 150 mAs, respectively, on the Aquilion One. Images were reconstructed at 2.5 mm (VCT) and 0.5 mm (Aquilion One). The VCT images were reconstructed using Advanced Statistical Iterative Reconstruction (ASIR) at 6 different strengths: 0%, 20%, 40%, 60%, 80%, and 100%. Aquilion One images were reconstructed using Adaptive Iterative Dose Reduction (AIDR) at 4 strengths: no AIDR, Weak AIDR, Standard AIDR, and Strong AIDR. Regions of interest (ROIs) were drawn on the images to measure the HU values and standard deviations of the diluted contrast. Second order polynomials were used to fit the HU values as a function of Iodine concentration. Results: For both scanners, there was no significant effect of changing the iterative reconstruction strength. The polynomial fits yielded goodness-of-fit (R2) values averaging 0.997. Conclusion: Changing the strength of the iterative reconstruction has no significant effect on the HU values of Iodinated contrast in a tissue-equivalent phantom. Fit values of HU vs Iodine concentration are useful in quantitative imaging protocols such as the determination of cardiac output from time-density curves in the main pulmonary artery.

60 APPLIED LIFE SCIENCES↗

Template-free cyclic hexavanadate: Synthesis, characterization, solid-state structure, and solution-state dynamics

A novel hexavanadate–organic hybrid material of the formula [NH 4 ] 2 [V 6 (µ 2 -O) 6 (O) 4 (PDC) 6 ] (PDC = 2,6-pyridinedicarboxylate) has been prepared in dilute nitric acid under hydrothermal reaction conditions. The product was characterized by single crystal and powder X-ray diffraction, FTIR, UV–Vis, Raman, and thermogravimetric analyses in the solid state, and small angle X-ray scattering, ESI-MS, NMR ( 1 H, 13 C, 51 V), and Raman spectroscopic techniques in aqueous solution. The crystal structure revealed a rare structure type in vanadium chemistry which crystallizes in the monoclinic space group P2 1/n and consists of a cyclic polyoxovanadate core with edge-capped tetrahedral and octahedral vanadium centers. The “hollow” polyoxovanadate is stabilized by a PDC ligand on each metal center, and ammonium ions charge balance the anionic core and form hydrogen bonding interactions with the hexavanadate units. Solution-state studies showed that the structural unit observed in the solid state hydrolyzes upon dissolution in water, resulting in a symmetric dimer bearing similar ligand sets. Finally, catalytic experiments on the photodecomposition of crystal violet, rhodamine B, methylene blue, and rhodamine 6G showed ≥93% degradation of the dyes under UV light irradiation upon addition of the vanadium complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗