Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRON RECOMBINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Strain-Driven Evolution of Structural and Carrier Recombination Dynamics in Germanium

Strain engineering in group-IV semiconductors, in particular germanium (Ge), offers a promising route for advancing next-generation optoelectronic device performance. High minority carrier lifetime serves as a direct indicator of superior material quality and device efficiency. Several factors govern the minority carrier lifetime in both strained Ge and strained GeSn, such as strain level, epilayer thickness, defects, surface roughness, and Sn alloying. In this study, the impact of biaxial strain on effective minority carrier lifetimes of tensile-strained Ge (0% ..epsilon..-Ge/Al?As, 0.78% ..epsilon..-Ge/In0.115?Ga0.885?As, and 0.93% ..epsilon..-Ge/In0.16?Ga0.84?As) and compressively strained GeSn (-0.53% c-Ge0.97?Sn0.03/Al?As) epilayers, grown by molecular beam epitaxy, was experimentally investigated via the microwave-reflection photoconductive decay (..mu..-PCD) technique as a simultaneous function of thickness and strain. The structural and strain-relaxation properties were analyzed by high-resolution x-ray diffraction and Raman spectroscopy, while surface morphology analysis using atomic force microscopy provided insights into the surface roughness of strained Ge-based epilayers. Defect characterization by cross-section transmission electron microscopy revealed superior crystalline quality of ..epsilon..-Ge in one epilayer, while twin boundary formation was observed in the other. We investigated the carrier recombination dynamics in epitaxially strained Ge by extracting the bulk recombination lifetime and surface recombination velocity using the thickness-dependent minority carrier lifetime. High effective minority carrier lifetimes of approximately 60-340 ns were achieved at high strain levels with minimal dependence on the thickness of the strained Ge-based epilayers by means of the ..mu..-PCD technique. Minority carrier lifetimes in Ge-based epilayers exhibit a quadratic dependence on the biaxial strain, ranging from -0.88% (compressive) to +1.6% (tensile). The analysis of the carrier recombination dynamics in strained Ge-based heterostructures offers a pathway to designing group-IV based optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Highly Efficient Ternary Solar Cells with Efficient Förster Resonance Energy Transfer for Simultaneously Enhanced Photovoltaic Parameters

Introducing a third component into organic bulk heterojunction solar cells has become an effective strategy to improve photovoltaic performance. Meanwhile, the rapid development of non-fullerene acceptors (NFAs) has pushed the power conversion efficiency (PCE) of organic solar cells (OSCs) to a higher standard. In this study, a series of fullerene-free ternary solar cells are fabricated based on a wide bandgap acceptor, IDTT-M, together with a wide bandgap donor polymer PM6 and a narrow bandgap NFA Y6. Insights from the morphological and electronic characterizations reveal that IDTT-M has been incorporated into Y6 domains without disrupting its molecular packing and sacrificing its electron mobility and work synergistically with Y6 to regulate the packing pattern of PM6, leading to enhanced hole mobility and suppressed recombination. IDTT-M further functions as an energy-level mediator that increases open-circuit voltage ( V OC ) in ternary devices. In addition, efficient Förster resonance energy transfer (FRET) between IDTT-M and Y6 provides a non-radiative pathway for facilitating exciton dissociation and charge collection. As a result, the optimized ternary device features a significantly improved PCE up to 16.63% with simultaneously enhanced short-circuit current ( J SC ), V OC , and fill factor (FF).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Soft Lattice and Defect Covalency Rationalize Tolerance of β‐CsPbI 3 Perovskite Solar Cells to Native Defects

Abstract Although all‐inorganic metal halide perovskites (MHPs) have shown tremendous improvement, they are still inferior to the hybrid organic–inorganic MHPs in efficiency. Recently, a conceptually new β‐CsPbI 3 perovskite reached 18.4 % efficiency combined with good thermodynamic stability at ambient conditions. We use ab initio non‐adiabatic molecular dynamics to show that native point defects in β‐CsPbI 3 are generally benign for nonradiative charge recombination, regardless of whether they introduce shallow or deep trap states. These results indicate that MHPs do not follow the simple models used to explain defect‐mediated charge recombination in the conventional semiconductors. The strong tolerance is due to the softness of the perovskite lattice, which permits separation of electrons and holes upon defect formation, and only allows carriers to couple to the low‐frequency vibrations. Both factors decrease notably the non‐adiabatic coupling and slow down the dissipation of energy to heat.

Chu, Weibin↗
DOE OSTI2026

Exploring Causes of Beam Loss at CEBAF

At Jefferson Lab, the Continuous Electron Beam Accelerator (CEBAF) features a unique design with two linear accelerators and two arc sections allowing for multiple turns of the electron beam, as well as four experimental end stations. This topology leads to increased beam losses, especially in the spreader and recombiner regions connecting the arcs to the linacs and in the extraction regions connecting the experimental end stations to the accelerator. These losses result in equipment activation and operational interruptions. Recent upgrades to the facility’s diagnostic systems, including the addition of xenon ion chambers, have provided higher-resolution data regarding these loss events. Building on this improved observational capability, we are developing a simulation framework using optics codes and the Geant4-based BDSIM to model beam extinction and halo formation in these regions. This work aims to correlate simulation results with experimental data to isolate the causes of beam loss and inform future machine tuning strategies. We present a summary of conclusions drawn from recent operational studies and outline a plan to model the beam loss and validate the simulations.

Matthews, C. [Old Dominion Univ., Norfolk, VA (Uni↗
NASA NTRS1972

Model potential calculations of lithium transitions.

Semi-empirical potentials are constructed that have eigenvalues close in magnitude to the binding energies of the valence electron in lithium. The potentials include the long range polarization force between the electron and the core. The corresponding eigenfunctions are used to calculate dynamic polarizabilities, discrete oscillator strengths, photoionization cross sections and radiative recombination coefficients. A consistent application of the theory imposes a modification on the transition operator, but its effects are small for lithium. The method presented can be regarded as a numerical generalization of the widely used Coulomb approximation.

Caves, T. C.↗
NASA NTRS1975

Laser processes in plasmadynamic flows

Radiation emitted from the exhaust flow of a multi-megawatt, quasi-steady magnetoplasmadynamic accelerator has been examined photoelectrically for argon mass flows from 6 to 32 g/sec and arc currents up to 25 kA. Vacuum ultraviolet radiation, indicative of resonance transitions, has been detected photoelectrically at various axial locations downstream of the arc chamber, consistent with a relaxation length calculated using a collisional-radiative recombination model. Photoelectric measurements of particular transitions in the neutral and first ionic state of argon show that populations of excited electronic states of AII are in excess of that which would be expected on the basis of Saha-Boltzmann equilibrium at the local electron temperature and number density. Optical depth measurements indicate that for a current of 4 kA and argon mass flow of 12 g/sec, a population inversion exists between the upper and lower states of the 0.4880 micron argon ion transition.

Campbell, E. M.↗
DOE OSTI2020

Directly Linking Low-Angle Grain Boundary Misorientation to Device Functionality for GaAs Grown on Flexible Metal Substrates

A new growth method to make highly oriented GaAs thin films on flexible metal substrates has been developed, enabling roll-to-roll manufacturing of flexible semiconductor devices. The grains are oriented in the <001> direction with <1 degree misorientations between them, and they have a comparable mobility to single-crystalline GaAs at high doping concentrations. At the moment, the role of low-angle grain boundaries (LAGBs) on device performance is unknown. A series of electron backscatter diffraction (EBSD) and cathodoluminesence (CL) studies reveal that increased doping concentrations decrease the grain size and increase the LAGB misorientation. Cross-sectional scanning transmission electron microscopy (STEM) reveals the complex dislocation structures within LAGBs. Most importantly, a correlative EBSD/electron beam-induced current (EBIC) experiment reveals that LAGBs are carrier recombination centers and that the magnitude of recombination is dependent on the degree of misorientation. The presented results directly link increased LAGB misorientation to degraded device performance, and therefore, strategies to reduce LAGB misorientations and densities would improve highly oriented semiconductor devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Heterogenous Integration of Boron-Doped p -Diamond with Monolayer n -MoS 2 for PN Junctions Operating at Room Temperature

Diamond has tremendous potential for power electronics, due to its superior thermal conductivity, large electric field strength, and high carrier mobilities. However, the absence of a reliable room temperature n-type transport has impeded any advancements in diamond-based electronics. Here, we circumvent this bottleneck by integrating n-type two-dimensional (2D) monolayers of molybdenum disulfide (MoS 2 ) with boron doped p-type single crystal diamond and demonstrate 2D/3D heterostructure-based PN junction diodes that operate at room temperature with excellent rectification characteristics. Our diodes achieve a maximum forward current density (J D ) of ∼4000 A/cm 2 , an ideality factor (η) value of ∼3.7, and a rectification ratio (RR) of 10 6 . We find that the origin of current rectification stems from the interlayer recombination of majority carriers driven by direct tunnelling (DT) and Fowler Nordheim (FN) tunnelling mechanisms. In conclusion, our demonstration can open new avenues for diamond-based power electronics through its integration with 2D materials.

2D/3D integration↗
DOE OSTI2025

A Theory of Ultrafast Charge Transfer Relaxation with Non-Innocent Solvent Molecules

In this work we revisit the photodynamics of tetracyanoethylene-hexamethylbenzene (TCNE- HMB), the molecular complex studied by Hochstrasser et al. [J. Chem. Phys. 100, 4797–4810, 1994] that has long challenged the applicability of Marcus’s theory of elec- tron transfer for predicting photochemical reactions. Using a novel black-box electronic structure algorithm (time-dependent density functional theory with one double, TD- DFT-1D) to efficiently run molecular dynamics that can treat charge recombination, we run ab initio surface hopping molecular dynamics and confirm that, for a polar solvent, charge recombination rates can be incredibly fast (indeed faster than the sol- vent relaxation time); for non-polar solvents, the rate is much slower. We demonstrate that, although Marcus theory cannot be directly applied, these nonequilibrium (and sometimes incredibly fast) photoexcited dynamics can be effectively explained within a two-state model without any evidence of a transition through a conical intersection. Most importantly, for this paradigmatic model system, we are able to identify two nuclear coordinates of interest (rather than the single coordinate predicted by Marcus or a full set of internal quantum modes studied by Bixon and Jortner): the solvent relaxation in the first shell (that strongly modulates the energies of the charge trans- fer state and differentiates time scales for relaxation) and a nuclear displacement in the TCNE-HMB complex arising from a handful of vibrations that induces non-Born Oppenheimer motion and eventually facilitates an abrupt electronic transition to the ground state. Altogether, these findings suggest a tractable generalization of Marcus theory for future simulations of photochemistry with non-innocent solvent environ- ments in the spirit of a Hamiltonian suggested by Stuchebrukhov (J. Chem. Phys. 107, 3821, 1997).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unraveling the Atomic Mechanism of the Crystalline Phase‐Dependent Structural Features and Special Spectral Design of α‐, β‐, and Ɛ‐Ga₂O₃

Atomic‐scale phase transformations profoundly influence the functional properties of Ga₂O₃ polymorphs. By combining irradiation experiments with microstructure characterization and theoretical approaches, phase‐specific energy‐dissipation pathways in α‐, β‐, and ε‐Ga₂O₃ are uncovered and strategies for targeted property design are outlined. Competing antiphase boundaries (APBs) and twin domain boundaries (TDBs) promote irreversible α→ε interconversion through domain fragmentation. In β‐Ga₂O₃, defect‐induced stress gradients drive two distinct local transformations: surface Ga‐aggregated β→δ that stabilizes transient states, and latent‐track‐confined β→κ phase transition with recoverable distortions via cation reordering. Under electronic excitation, β‐Ga₂O₃ forms nanohillocks via robust GaO₆ octahedra (high density/strong Ga─O bonds), while α/ε‐Ga₂O₃ generates nanopores from tetrahedral Ga looseness (low bonding energy), highlighting phase‐dependent surface dynamics shaped by atomic packing and bonding anisotropy. Defect‐regulated recombination suppresses visible photoluminescence in α/β‐Ga₂O₃, whereas in ε‐Ga₂O₃ bandgap narrowing of ΔE: 0.30 eV is observed, enhancing emission. Linking phase‐dependent defect‐carrier interactions and metastable‐phase engineering in Ga₂O₃ enables property optimization for power‐electronics and optoelectronics devices.

electronic state configuration↗
DOE OSTI2021

Non-radiative luminescence decay with self-trapped hole migration in strontium titanate: Interplay between optical and transport properties

A novel model for the non-radiative decay of self-trapped excitons (STEs) in the advanced functional oxide SrTiO3 is proposed and supported by experimental observations. The study is based on the initial ionoluminescence stage for STE emission at 2.5 eV, and its dependence on temperature and electronic excitation rate under energetic heavy-ion irradiation. For all temperatures, this initial stage reaches rapidly a quasi-steady level, and then decreases as induced-structural damage increases. The quasi-steady luminescence exhibits a linear dependence on the excitation rate, suggesting a constant efficiency for STEs formation. An activation energy of 55 meV, essentially independent of the incident ion mass and energy of projectile-ion, is deduced from an Arrhenius-type relationship with irradiation temperature. This energy is in good agreement with experimental values, measured for non-radiative STE decay under ns-laser pulse excitation, and reasonably consistent with density functional theory calculations for migration of self-trapped holes (STHs) described by a small-polaron adiabatic hopping model. A new mechanism dealing with a non-radiative contribution to the STE transition is discussed, consisting of STH migration through thermally-activated hopping and annihilation with the STE-electron. Luminescence kinetics from the chromium intrinsic impurity strongly supports this model, being consistent with the annihilation of Cr 3+ centers through recombination with migrating STHs.

luminescence↗
DOE OSTI2023

Water-Assisted Lift-Off Process for Flexible CdTe Solar Cells

In recent years, various lift-off methods have been developed to fabricate lightweight and flexible cadmium telluride (CdTe)-based solar cells. In this work, we report flexible cadmium sulfide (CdS)/CdTe solar cells using a water-assisted lift-off approach. Here we demonstrate that an additional cadmium chloride treatment for the CdS film is critical to improve the grain size of CdS and the post-deposited CdTe film and the electron conductivity of the CdS film. As a result, the quality of the CdS/CdTe front junction is significantly improved with reduced nonradiative recombination. Finally, our lightweight and flexible polycrystalline CdTe solar cells demonstrate a champion power conversion efficiency of 12.6%.

14 SOLAR ENERGY↗
DOE OSTI2021

Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies

The chemical structure of donors and acceptors limit the power conversion efficiencies achievable with active layers of binary donor-acceptor mixtures. Here, using quaternary blends, double cascading energy level alignment in bulk heterojunction organic photovoltaic active layers are realized, enabling efficient carrier splitting and transport. Numerous avenues to optimize light absorption, carrier transport, and charge-transfer state energy levels are opened by the chemical constitution of the components. Record-breaking PCEs of 18.07% are achieved where, by electronic structure and morphology optimization, simultaneous improvements of the open-circuit voltage, short-circuit current and fill factor occur. The donor and acceptor chemical structures afford control over electronic structure and charge-transfer state energy levels, enabling manipulation of hole-transfer rates, carrier transport, and non-radiative recombination losses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Pushing the heterometal doping limit while preserving long-lived charge separation in a Ti-based MOF photocatalyst

Here, this study explores the nature, dynamics, and reactivity of the photo-induced charge separated excited state in a Fe 3+ -doped titanium-based metal organic framework (MOF), xFeMIL125-NH 2 , as a function of iron concentration. The MOF is synthesized with doping levels x = 0.5, 1 and 2 Fe node sites per octameric Ti-oxo cluster and characterized by powder x-ray diffraction, UV-vis diffuse reflectance, atomic absorption, and steady state Fe K-edge X-ray absorption spectroscopy. For each doping level, time-resolved X-ray transient absorption spectroscopy studies confirm the electron trap site role of the Fe sites in the excited state. Time scan data reveal multiexponential decay kinetics for the charge recombination processes which extend into the microsecond range for all three concentrations. A series of dye photodegradation studies, based on the oxidative decomposition of Rhodamine B, demonstrates the reactivity of the charge separated excited state and the photocatalytic capacity of these MOF materials compared to traditional heterometal-doped semiconductor photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The influence of V-defects, leakage, and random alloy fluctuations on the carrier transport in red InGaN MQW LEDs

Red InGaN-based light-emitting diodes (LEDs) exhibit lower internal quantum efficiencies than violet, blue, and green InGaN LEDs due to a reduction in radiative recombination rates relative to non-radiative recombination rates as the Indium composition increases. Additionally, the larger polarization and band offset barriers between high indium content InGaN quantum wells and GaN quantum barriers increase the forward voltage. In blue and green LEDs, random alloy fluctuations and V-defects play a key role in reducing the forward voltage. When V-defects are present, either naturally or intentionally introduced, they create an alternative path for carrier injection into the MQWs through the V-defect sidewalls. This injection mechanism explains the turn-on voltages of green LEDs. However, in InGaN red LEDs, these two phenomena do not reduce the forward voltage as effectively as in blue and green LEDs, and consequently, the computed forward voltage remains significantly higher than the measured one. Furthermore, currents are observed at low voltages before the turn-on voltage (V<ℏω/e=2.0 V) of red LEDs. To address this, we introduce dislocation-induced tail states in the modeling, suggesting that leakage current through these states may play a significant role both below and at turn-on voltages. The simulation also indicates that leakage carriers below turn-on accumulate, partially diffuse in the QWs, screen the polarization-induced barrier in the low injection regime, and further reduce the forward voltage. Despite these beneficial effects, a drawback of dislocation-induced tail states is the enhanced nonradiative recombination in the dislocation line region. This study provides a detailed analysis of device injection physics in InGaN QW red LEDs and outlines potential optimization strategies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1974

Boltzmann equation for the electron gas of a nondegenerate plasma

The collision terms in the Boltzmann equation associated with various processes are derived. For processes having a Fokker-Planck (F-P) limit, the associated F-P operator is derived by means of physical arguments to determine the form of the operator; its multiplying constant is fixed by calculating the total energy exchange rate and comparing with the rate computed by other means. In this manner, the F-P operator is derived for electron-ion scattering, electron-electron scattering in the high-velocity limit, electron-atom elastic scattering, Compton scattering, and the high-velocity limit for inelastic scattering. Other processes considered are bremsstrahlung, radiative-recombination, photoionization, collisional ionization of atoms, and suprathermal-particle ionization of atoms.

Gould, R. J.↗
NASA NTRS1992

The chemical effects of auroral oxygen precipitation at Jupiter

A numerical model of the auroral ionosphere and thermosphere of Jupiter, which includes odd oxygen species, is presented. Density profiles of neutral species O, OH, and H2O and the ion species H2(+), H3(+), H(+), H2O(+), H3O(+), O(+), and OH(+) are calculated. The total neutral odd oxygen density is found to be about 10 exp 5/cu cm near the auroral ionosphere peak. The major ionospheric ion, H(+) reacts rapidly with both O and H2O and the presence of these species in the model calculations significantly reduces the H(+) density and thus the electron density. The chemical lifetime against reaction of H(+) with odd oxygen is about 1000 s near the peak, whereas the radiative recombination lifetime is roughly 10,000 s.

Cravens, T. E.↗