Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electron localization function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Quantitative determination of site occupancy of multi-rare-earth elements doped into Ca{sub 2}SnO{sub 4} phosphor by electron channeling microanalysis

X-ray fluorescence analysis based on electron channeling effects in transmission electron microscopy (TEM) was performed on Ca{sub 2}SnO{sub 4} phosphor materials doped with Eu{sup 3+}/Y{sup 3+} at various concentrations, which showed red photoluminescence associated with the {sup 5}D{sub 0}-{sup 7}F{sub 2} electric dipole transition of Eu{sup 3+} ions. The method provided direct information on which host element site dopant elements occupy, the results of which were compared with those of X-ray diffraction (XRD)-Rietveld analysis. The obtained results indicated that while it is not favorable for a part of Eu{sup 3+} to occupy the smaller Sn{sup 4+} site, this is still energetically better than creating Ca vacancies or any other of the possible charge balance mechanisms. The local lattice distortions associated with dopant impurities with different ionic radii were also examined by TEM-electron energy-loss spectroscopy (TEM-EELS). The change in PL intensity as a function of dopant concentration is discussed based on the experimental results, although the general concept of concentration quenching applies. - Abstract: The composition of Ca{sub 1.8}Eu{sub 0.2}Y{sub 0.2}Sn{sub 0.8}O{sub 4} determined by electron channeling microanalysis is graphically shown, where the rare-earth dopants, Eu and Y preferentially occupy the Ca and Sn sites, respectively, to maintain the local charge neutrality.

36 MATERIALS SCIENCE↗

Fe and Ni Dopants Facilitating Ammonia Synthesis on Mn 4 N and Mechanistic Insights from First-Principles Methods

Cyclic step-catalysis enables intermittent, atmospheric ammonia production, and can be integrated with sustainable and renewable energy sources. By employing metal (e.g., Mn) nitride, a nitrogen carrier, the rate-limiting N 2 activation step is bypassed. In this work, molecular-level pathways, describing the reduction of Mn 4 N by dissociatively adsorbed hydrogen, were investigated using periodic density functional theory (DFT). The established mechanism confirmed that Fe and Ni doped in the nitride sublayer and top layer can disturb local electronic structures and be exploited to tune the ammonia production activity. The strength of N–M (M = Mn, Fe, Ni) and H–M bonds both determine the overall reduction thermochemistry. DFT-based modeling further showed that the low concentration of Fe or Ni in the Mn 4 N sublayer facilitates N diffusion by lowering the diffusion energy barrier. Also, these heteroatom dopant species, particularly Ni, decrease the reduction endergonicity, thanks to the strong hydrogen binding with the surface Ni dopant. The Brønsted–Evans–Polanyi relationship and linear scaling relationships have been developed to reveal ammonia evolution kinetic and energetic trends for a series of idealized Fe- and Ni-doped Mn 4 N. Finally, deviations from the linear scaling relationship have been observed for certain doped systems, indicating potentially more complex behaviors of metal nitrides and intriguing promises for greater ammonia synthesis materials design opportunities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Work function of few layer graphene covered nickel thin films measured with Kelvin probe force microscopy

Few layer graphene and graphite are simultaneously grown on a ∼100 nm thick polycrystalline nickel film. The work function of few layer graphene/Ni is found to be 4.15 eV with a variation of 50 meV by local measurements with Kelvin probe force microscopy. This value is lower than the work function of free standing graphene due to peculiar electronic structure resulting from metal 3d-carbon 2p(π) hybridization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A generalization of the Drude-Smith formula for magneto-optical conductivities in Faraday geometry

In this study, we generalize the impulse response approach and Poisson statistics proposed by Smith [Phys. Rev. B 64, 155106 (2001)] to evaluate the longitudinal and transverse magneto-optical conductivities in an electron gas system in Faraday geometry. Comparing with the standard Drude model, the coefficients a{sub n} are introduced in the Drude-Smith formula to describe the backscattering or localization effect for the nth electronic scattering event. Such a formula can also be applied to study the elements of the dielectric function matrix in the presence of magnetic and radiation fields in electron gas systems. This theoretical work is primely motivated by recent experimental activities in measuring the real and imaginary parts of longitudinal and transverse magneto-optical conductivities in condensed matter materials and electronic devices using terahertz time-domain spectroscopy. We believe that the results obtained from this study can provide an appropriate theoretical tool in reproducing the experimental findings and in fitting with experimental data to determine the important sample and material parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carbon nanotube thermoelectric devices by direct printing: Toward wearable energy converters

Thermoelectric devices convert thermal energy to electrical energy and are particularly well-suited for energy harvesting from waste heat. Even as the number of electronic devices used in daily life proliferates, technical advances diminish the average power such devices require to perform a given function. Here, localized thermal gradients that abound in our living environments, despite having modest energy densities, are therefore becoming increasingly viable and attractive to power such devices. With this motivation, we report the design, fabrication, and characterization of single-wall carbon nanotube thermoelectric devices (CNT-TDs) on flexible polyimide substrates as a basis for wearable energy converters. Our aqueous-solution-based film fabrication process could enable readily scalable, low-cost TDs; here, we demonstrate CNT-hydroxypropyl cellulose (HPC) composite thermoelectric films by aerosol jet printing. The electrical conductivity of the composite films is controlled through the number of CNT/HPC layers printed in combination with control of the annealing conditions.

30 DIRECT ENERGY CONVERSION↗

Strain effects on the electronic properties in δ -doped oxide superlattices

We investigated strain effects on the electronic properties of (LaTiO 3 ) 1 /(SrTiO 3 )N superlattices using density functional theory. Under biaxial in-plane strain within the range of -5% ≤ ε// ≤ 5%, the d xy orbital electrons are highly localized at the interfaces whereas the d yz and d xz orbital electrons are more distributed in the SrTiO 3 (STO) spacer layers. For STO thickness N ≥ 3 unit cells (u.c.), the d xy orbital electrons form two-dimensional (2D) electron gases (2DEGs). The quantized energy levels of the 2DEG are insensitive to the STO spacer thickness, but are strongly dependent on the applied biaxial in-plane strain. As the in-plane strain changes from compressive to tensile, the quantized energy levels of the dxy orbitals decrease thereby creating more states with 2D character. In contrast to the d xy orbital, the d yz and dxz orbitals always have three-dimensional (3D) transport characteristics and their energy levels increase as the strain changes from compressive to tensile. In conclusion, since the charge densities in the d xy orbital and the d yz and d xz orbitals respond to biaxial in-plane strain in an opposite way, the transport dimensionality of the majority carriers can be controlled between 2D and 3D by applying biaxial in-plane strain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure reconstruction across the antiferromagnetic transition in TaFe₁̣₂₃Te₃ spin ladder

With angle-resolved photoemission spectroscopy, we studied the electronic structure of TaFe₁̣₂₃Te₃, a two-leg spin ladder compound with a novel antiferromagnetic ground state. Quasi-two-dimensional Fermi surface is observed, with sizable inter-ladder hopping. Moreover, instead of observing an energy gap at the Fermi surface in the antiferromagnetic state, we observed the shifts of various bands. Combining these observations with density-functional-theory calculations, we propose that the large scale reconstruction of the electronic structure, caused by the interactions between coexisting itinerant electrons and local moments, is most likely the driving force of the magnetic transition. Thus TaFe₁̣₂₃Te₃ serves as a simpler platform that contains similar ingredients as the parent compounds of iron-based superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Geometric frustration in the myosin superlattice of vertebrate muscle

Geometric frustration results from an incompatibility between minimum energy arrangements and the geometry of a system, and gives rise to interesting and novel phenomena. Here, we report geometric frustration in a native biological macromolecular system---vertebrate muscle. We analyse the disorder in the myosin filament rotations in the myofibrils of vertebrate striated (skeletal and cardiac) muscle, as seen in thin-section electron micrographs, and show that the distribution of rotations corresponds to an archetypical geometrically frustrated system---the triangular Ising antiferromagnet. Spatial correlations are evident out to at least six lattice spacings. The results demonstrate that geometric frustration can drive the development of structure in complex biological systems, and may have implications for the nature of the actin--myosin interactions involved in muscle contraction. Identification of the distribution of myosin filament rotations with an Ising model allows the extensive results on the latter to be applied to this system. It shows how local interactions (between adjacent myosin filaments) can determine long-range order and, conversely, how observations of long-range order (such as patterns seen in electron micrographs) can be used to estimate the energetics of these local interactions. Furthermore, since diffraction by a disordered system is a function of the second-order statistics, the derived correlations allow more accurate diffraction calculations, which can aid in interpretation of X-ray diffraction data from muscle specimens for structural analysis.

59 BASIC BIOLOGICAL SCIENCES↗

Chemical Imaging and Dynamical Studies of Reactivity and Emergent Behavior in Complex Interfacial Systems. Final Technical Report

This research program explored the efficacy of using molecular-level manipulation, imaging and scanning tunneling spectroscopy in conjunction with supersonic molecular beam gas-surface scattering to significantly enhance our understanding of chemical processes occurring on well-characterized interfaces. One program focus was on the spatially-resolved emergent behavior of complex reaction systems as a function of the local geometry and density of adsorbate-substrate systems under reaction conditions. Another focus was on elucidating the emergent electronic and related reactivity characteristics of intentionally constructed single and multicomponent atom- and nanoparticle-based materials. We also examined emergent chirality and self-organization in adsorbed molecular systems where collective interactions between adsorbates and the supporting interface lead to spatial symmetry breaking. In many of these studies we combined the advantages of scanning tunneling (STM) and atomic force (AFM) imaging, scanning tunneling local electronic spectroscopy (STS), and reactive supersonic molecular beams to elucidate precise details of interfacial reactivity that had not been observed by more traditional surface science methods. Using these methods, it was possible to examine, for example, the differential reactivity of molecules adsorbed at different bonding sites in conjunction with how reactivity is modified by the local configuration of nearby adsorbates. At the core of this effort was the goal of significantly extending our understanding of interfacial atomic-scale interactions to create, with intent, molecular assemblies and materials with advanced chemical and physical properties. This ambitious program addressed several key topics in DOE Grand Challenge Science, including emergent chemical and physical properties in condensed phase systems, novel uses of chemical imaging, and the development of advanced reactivity concepts in combustion and catalysis including carbon management. These activities directly benefitted national science objectives in the areas of chemical energy production and advanced materials development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structures of HgTe and CdTe surfaces and HgTe/CdTe interfaces

A Green's-function method has been used to study the surface and interface electronic structures of the II-VI compounds HgTe and CdTe. Localized surface and resonance states near the cation-terminated (100) surface of CdTe and the anion-terminated surface of HgTe have been found for the ideal surfaces. The energies and strengths of these surface states are altered by surface perturbations. The bulk states near the surface are drastically modified by the creation of the surface, but the band gaps remain unchanged. Numerical evaluation of the local densities of states at the Gamma and J points shows that, at the (100) interface of HgTe/CdTe, the previously observed surface states are no longer present. However, in the interface region, bulk states of one material penetrate some distance into the other material.

Schick, J. T.↗

Observation of High-Energy Electrons Precipitated by NWC Transmitter From PROBA-V Low-Earth Orbit Satellite

The very low-frequency transmitter in the Northwest Cape of Australia (NWC) has previously been observed to pitch-angle scatter electrons with energies from 30–400 keV, creating enhanced fluxes measured by low-Earth orbiting (LEO) satellites. Here we use observations from the Energetic Particle Telescope on PROBA-V. We compare the measured flux, as a function of local magnetic field strength, when the NWC transmitter is “on” versus “off,” and find enhanced fluxes only when NWC is “on” and located on the nightside. The enhanced fluxes occur in the population gradually transitioning from “permanently trapped” to “quasi-trapped.” We show that electrons up to 800 keV, substantially higher energy than previously studied, are scattered by resonant interactions with NWC to produce enhanced fluxes. The enhanced fluxes appear at multiple L-shells for each energy channel, consistent with resonance conditions at distinct wave normal angles, that indicate ducted interactions at L < 1.55 and unducted interactions at L > 1.65.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of the sheath formation in a dusty plasma containing energetic electrons and nano-size dust grains

Numerical simulations of the stationary multi-fluid equations are used to study the structure of a dusty plasma sheath in the presence of a beam of energetic electrons. It is found that even a small number of energetic electrons can strongly modify the sheath parameters, specially the sheath thickness. Depending on the magnitude of the beam flux, two different regimes of sheath thickness can be recognized; At small beam fluxes, the sheath is in the regime of thin sheath and its thickness grows linearly with the beam flux. As the beam flux increases, at a certain beam energy or beam number density, the sheath demonstrates a sharp transition to the regime of thick sheath where the width is almost three times larger. The beam parameters corresponding to the transition between the two regimes depend on the parameters of the background plasma. The beam transition energy increases with the electron temperature and dust number density while decreases with the dust radius. On the other hand, the beam transition number density is a non-monotonic function of the background plasma number density. The localization of dust particles above the substrate is intensified by the increase in the beam number density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

FEBIP for functional nanolithography of 2D nanomaterials

Lithographic patterning on emerging nanomaterials is one of essential ingredients for the development of new functional nanomaterial and device systems. Focused electron beam induced processing (FEBIP) in combination with an on-demand reconfigurable precursor injection system enables the highest resolution and controllability of nanolithography on two-dimensional (2D) nanomaterials. FEBIP allows for localized atomic-to-nanoscale engineering of nanomaterials and devices in a multi-mode format including geometrical patterning, functionalization/defect formation/doping, metal/metal oxide deposition, interface fusion and activation, active channel cleaning. This chapter discusses the scientific bases and showcases the state-of-the-art FEBIP technologies with a specific focus on functional lithography of 2D nanomaterials and provides future prospects of FEBIP technologies to address real industrial needs for the development of high-performance, next-generation functional devices.

2D materials, nanolithography, focused electron be↗

Cross-correlation spectra in interacting quantum dot systems

Two-color spin-noise spectroscopy of interacting electron spins in singly charged semiconductor quantum dots provides information on the interquantum dot interactions. We investigate the spin cross-correlation function in a quantum dot ensemble employing a modified semiclassical approach. Spin-correlation functions are calculated using a Hamilton quaternion approach that maintains local quantum mechanical properties of the spins. This method takes into account the effects of the nuclear-electric quadrupolar interactions, the randomness of the coupling constants, and the variation of the electron g factor on the spin-noise power spectra. We demonstrate that the quantum dot ensemble can be mapped on an effective two-quantum dot problem and discuss how the characteristic length scale of the interdot interaction modifies the low-frequency cross-correlation spectrum. Here, we argue that details on the interaction strength distribution can be extracted from the cross-correlation spectrum when applying a longitudinal or a transversal external magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flat-Band-Enabled Triplet Excitonic Insulator in a Diatomic Kagome Lattice

The excitonic insulator (EI) state is a strongly correlated many-body ground state, arising from an instability in the band structure of narrow-gap semiconductors towards exciton formation. Here we show that the flat valence and conduction bands of a Yin-Yang Kagome lattice, as exemplified in a superatomic graphene lattice, conspire to enable an interesting state of triplet EI, based on first-principles Density Functional Theory (DFT) calculations combined with many-body GW and Bethe-Salpeter Equation (BSE). As an intrinsic property of topological flat bands, highly localized electron and hole wavefunctions significantly reduce the screening and enhance the exchange interaction, leading to an unusually high triplet exciton binding energy (~1.2 eV) exceeding the GW band gap by ~0.2 eV and a huge singlet-triplet splitting of ~0.4 eV. Here, the flat-bands-enabled triplet EI state also points to the possibility of complete population inversion between the two topological flat bands for the realization of excited quantum spin Hall effect. Our findings enrich once again the intriguing physics of flat bands, which has drawn broad interest.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-dimensional Vlasov simulation of electron plasma wave trapping, wavefront bowing, self-focusing, and sideloss

Two-dimensional Vlasov simulations of nonlinear electron plasma waves are presented, in which the interplay of linear and nonlinear kinetic effects is evident. The plasma wave is created with an external traveling wave potential with a transverse envelope of width {Delta}y such that thermal electrons transit the wave in a ''sideloss'' time, t{sub sl{approx}{Delta}}y/v{sub e}. Here, v{sub e} is the electron thermal velocity. The quasisteady distribution of trapped electrons and its self-consistent plasma wave are studied after the external field is turned off. In cases of particular interest, the bounce frequency, {omega}{sub be}=k{radical}(e{phi}/m{sub e}), satisfies the trapping condition {omega}{sub be}t{sub sl}>2{pi} such that the wave frequency is nonlinearly downshifted by an amount proportional to the number of trapped electrons. Here, k is the wavenumber of the plasma wave and {phi} is its electric potential. For sufficiently short times, the magnitude of the negative frequency shift is a local function of {phi}. Because the trapping frequency shift is negative, the phase of the wave on axis lags the off-axis phase if the trapping nonlinearity dominates linear wave diffraction. In this case, the phasefronts are curved in a focusing sense. In the opposite limit, the phasefronts are curved in a defocusing sense. Analysis and simulations in which the wave amplitude and transverse width are varied establish criteria for the development of each type of wavefront. The damping and trapped-electron-induced focusing of the finite-amplitude electron plasma wave are also simulated. The damping rate of the field energy of the wave is found to be about the sideloss rate, {nu}{sub e{approx}}t{sub sl}{sup -1}. For large wave amplitudes or widths {Delta}y, a trapping-induced self-focusing of the wave is demonstrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electronic and magnetic properties of electron-doped V 2 O 5 and NaV 2 O 5

Because of its narrow split-off conduction band, doping of V 2 O 5 leads to interesting strongly correlated electrons. We study the effects of doping on V 2 O 5 's electronic and magnetic properties, either by adding electrons compensated by an artificial homogeneous background, or a virtual crystal approximation (VCA), by changing the atomic number Z V , so as to keep charge neutrality, or by explicitly introducing Na as a dopant. The former two are considered as a way to simulate injected charge by gating, the latter occurs in the vanadium bronze NaV 2 O 5 . We also simulate Na 1 - x V 2 O 5 using a virtual crystal approximation by changing the atomic number 10 ≤ Z Na ≤ 11 . The differences in the band structure, which result from how the electrons added to the band are compensated by positive charge in the three models, are compared. The electronic band structures are calculated using the quasiparticle self-consistent Q S G W method including a lattice polarization correction and the local spin density functional method with Hubbard- U corrections (LSDA+ U ). For NaV 2 O 5 , the half-filling leads to a splitting of the up- and down-spin lowest d x y band. The spins are found to prefer an antiferromagnetic ordering along the chain direction. Other spin configurations are shown to have higher energy and the exchange interactions are extracted and compared with literature. The optical conductivities are calculated and compared with experiment. Similar results are found for simply doping the band compensated by a background or virtual crystal approximation. Yet, the position of the occupied bands depends on the method chosen for compensating the charge. The most realistic way to simulate gating in which the compensating charge is kept away from the V 2 O 5 layer is the VCA with varying Z Na . The splitting between the up- and down-spin bands depends on the filling. Furthermore, we find that below a certain concentration of about 0.88 electrons per V, the FM arrangement becomes preferable over the antiferromagnetic one. The magnetic moments then gradually decrease as we lower the filling of the split-off band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Beam-deposited platinum as versatile catalyst for bottom-up silicon nanowire synthesis

The controlled localized bottom-up synthesis of silicon nanowires on arbitrarily shaped surfaces is still a persisting challenge for functional device assembly. In order to address this issue, electron beam and focused ion beam-assisted catalyst deposition have been investigated with respect to platinum expected to form a PtSi alloy catalyst for a subsequent bottom-up nanowire synthesis. The effective implementation of pure platinum nanoparticles or thin films for silicon nanowire growth has been demonstrated recently. Beam-deposited platinum contains significant quantities of amorphous carbon due to the organic precursor and gallium ions for a focused ion beam-based deposition process. Nevertheless, silicon nanowires could be grown on various substrates regardless of the platinum purity. Additionally, p-type doping could be realized with diborane whereas n-type doping suppressed a nanowire growth. The rational utilization of this beam-assisted approach enables us to control the localized synthesis of single silicon nanowires at planar surfaces but succeeded also in single nanowire growth at the three-dimensional apex of an atomic force microscopy tip. Therefore, this catalyst deposition method appears to be a unique extension of current technologies to assemble complex nanowire-based devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗