Search NASA⌕ Search

SEARCH · Search NASA

Results for “Engine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Variable-speed supercharger for highly diluted internal combustion engines

An engine control system includes an internal combustion engine including a plurality of cylinders. An intake manifold is connected to the internal combustion engine. An exhaust manifold is connected to the internal combustion engine. A supercharger is connected to an air intake passage and the intake manifold and includes a variable speed drive. A throttle valve is disposed in the air intake passage. An exhaust passage is in connection with the exhaust manifold. A passive selective catalytic reduction catalyst system is in communication with the exhaust passage. An exhaust gas recirculation passage is in communication with the exhaust passage and the air intake passage and includes an exhaust gas recirculation valve. A controller controls the variable speed drive of the supercharger and the throttle valve and the exhaust gas recirculation valve based upon engine conditions.

42 ENGINEERING↗
DOE OSTI2017

A Practical Application of Integrated Systems Engineering and Project Management on a Complex EPC Project - 17207

This paper introduces how an integrated set of Systems Engineering (SE) and Project Management (PM) processes were applied in a practical way, to address the challenges on a complex, highly technical, Engineering Procurement Construction project within the nuclear field. This approach was inspired by: - the principles contained in a Community of Practice on Lean in Program Management jointly established in May 2012 by MIT, PMI and INCOSE; - an opportunity to apply international standard ISO/IEC 15288:2008(E) Systems and software engineering - System life cycle processes on a real-life situation; - and the belief that there is great value in applying Systems Engineering and Project Management in an integrated manner on a project. The project offering this opportunity was the Detail Engineering, Procurement, Construction and Cold Commissioning (EPC) of the Silo Direct-encapsulation Plant (SDP). This project was undertaken by the Joint Venture (JV) formed by Areva, Mace and Atkins (a.m.a. Nuclear Ltd). Unfortunately, early termination of the project, at a stage when only a part of the processes and tools were being implemented, did not allow this integrated approach to be demonstrated in full. However, the benefits achieved in the early stages in aligning and forming an integrated project execution team, showed potential for great benefits. This paper covers an introductory analysis of the situation, the successes and benefits achieved from implementing an integrated SE - PM approach up to the stage when the project was terminated, and possible path forward had the project continued. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Challenging Engineering Demographics and the READY Program - 18528

The mission of the Liquid Waste Organization at the Savannah River Site involves the safe storage of nuclear waste, closure of waste tanks, and immobilization of the waste into grout (low-level waste) or glass (high-level waste). With much of the mission left to complete and a significant percentage of the engineering organization eligible for retirement within the next 5 years, focus has been on recruiting and retaining new hires and early career engineers. Over the past two years, enhancements have been made to current programs and new programs have been created with the goal of improving the retention rate for engineering. These programs include the Reaching Engineers at the Development Years, the Early Career Professional Technology Exchange, the Shift Technical Engineer Pipeline, and Technical Staff Training. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Panel Session 35: Panel: Graduating Students and New Scientists and Engineers - Wants and Needs - Are Companies Even Listening?

This panel focuses on new hires, graduating scientists and engineers having open lines of communication with employers. Considering the projected shortfalls in the workforce, effective communication of wants and needs of both the employer and employee must exist. Do these needs differ between industries and/or generations? Currently, it seems that both sides must work harder to achieve this level of communication. With this new approach, both sides can express their wants and needs for a more satisfied workforce and a better work environment. Presentations proposed include: 1 - Graduating Students and New Engineers - Wants and Needs - Are 'National Labs' Even Listening? (Michelle Bingham, Idaho National Laboratory (USA)); 2 - Graduating Students and New Engineers - Wants and Needs - Are Companies Even Listening? (Alexander Pappas, Washington River Protection Solutions (USA)); 3 - Graduating Students and New Engineers - Wants and Needs - Are the Government Agencies Even Listening? (Lisa Phillips, US DOE (USA)); 4 - Graduating Students and New Engineers - Wants and Needs - Are Companies Even Listening? (Silvina Di Pietro, Applied Research Center - FIU (USA), Ximena Lugo, Applied Research Center - FIU (USA))

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

The overview in safety review of human factors engineering and control room design in chinese AP1000 nuclear power plant - 174

The first AP1000 nuclear power plant is constructed in Sanmen county in Zhejiang Province in China, which has creative and distinctive design characteristics. Human factors engineering disciplines are applied to the design of the AP1000. In addition to the elements of the program review model(including human factors engineering program management, operating experience review, functional requirements analysis and allocation, task analysis, staffing, integration of human reliability analysis with human factors engineering, human system interface design, procedure development, training program development, human system interface verification and validation, design implementation, human performance monitoring),the minimum inventory of controls, displays, and alarms present in the main control room and at the remote shutdown workstation. These contents mentioned above are reviewed according to standards, rules and regulations. This article introduces review process, and several important issues during the reviewing are described in detail. These issues include many elements, such as operating experience review, task analysis, human system interface design, verification and validation,and so on. This paper emphasizes on the main control room design(including environment and layout). Background noise in the actual main control room may exceed too much to design value. Another important issue is about main control room habitability systems(VES) changes to satisfy post-actuation performance requirements in AP1000 design change proposal. All the wall panel displays will be closed in this design change proposal. Review process and proposal are described in the paper. Since the AP1000 unit in China is the first constructed all over the world, verification and validation are especially important and necessary. The plan of verification and validation, the results summary report of verification and validation, the report of human engineering discrepancies are focus attention. Verification and validation in human factors engineering include HSI task support verification, HFE design verification and integrated system validation. This paper introduces the review process of verification and validation, the issues found in verification and validation. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2015

Feasibility of observing small differences in friction mean effective pressure between different lubricating oil formations using small, single-cylinder motored engine rig

Here, the feasibility of using a motored single-cylinder 517 cc diesel engine to observe small frictional differences between oil formulations is investigated. Friction mean effective pressure (FMEP) is measured and compared for an SAE 10W-30 and an SAE 5W-20 oil in three stages of production: base oil, commercial oil without a friction and wear reducing additive, and fully formulated commercial oil. In addition, a commercial SAE 5W-30 engine oil is investigated. Friction mean effective pressure is plotted versus oil dynamic viscosity to compare the lubricant FMEP at a given viscosity. Linear regressions and average friction mean effective pressure are used as a secondary means of comparing FMEP for the various oil formulations. Differences between the oils are observed with the base oil having higher friction at a given viscosity but a lower average FMEP due to the temperature distribution of the test and lower viscosities reached by the base oil. The commercial oil is shown to have both a higher FMEP at a given viscosity and a higher average FMEP than the commercial oil without a friction and wear reducing additive. The increase in friction for the oil without a friction and wear reduction additive indicates that the operational regime of the engine may be out of the bounds of the optimal regime for the additive or that the additive is more optimized for wear reduction. Results show that it is feasible to observe small differences in FMEP between lubricating oil formulations using a small, single-cylinder motored engine.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

CIE Analysis Process for Engineered Systems

"CIE Analysis Process for Engineered Systems" outlines a comprehensive methodology for integrating Cyber-Informed Engineering (CIE) principles into both new and existing engineered systems. Sponsored by the U.S. Department of Energy’s Office of Cybersecurity, Energy Security, and Emergency Response (DOE CESER), the process aims to achieve cyber-informed decisions by producing functional security requirements for new systems and retrofitting existing systems to mitigate digital risks. The document details a step-by-step approach, including mission and function definition, digital asset awareness, consequence analysis, and mitigation analysis. It emphasizes the importance of documenting mechanical, electrical, programmable, and network components to protect system functions and provides examples and considerations for each step. The ultimate goal is to ensure that engineered systems remain resilient against cyber threats, maintaining safety, performance, and reliability.

42 - ENGINEERING↗
DOE OSTI2011

Dynamic Analysis of Electrical Power Grid Delivery: Using Prime Mover Engines to Balance Dynamic Wind Turbine Output

This paper presents an investigation into integrated wind + combustion engine high penetration electrical generation systems. Renewable generation systems are now a reality of electrical transmission. Unfortunately, many of these renewable energy supplies are stochastic and highly dynamic. Conversely, the existing national grid has been designed for steady state operation. The research team has developed an algorithm to investigate the feasibility and relative capability of a reciprocating internal combustion engine to directly integrate with wind generation in a tightly coupled Hybrid Energy System. Utilizing the Idaho National Laboratory developed Phoenix Model Integration Platform, the research team has coupled demand data with wind turbine generation data and the Aspen Custom Modeler reciprocating engine electrical generator model to investigate the capability of reciprocating engine electrical generation to balance stochastic renewable energy.

17 WIND ENERGY↗
DOE OSTI2025

Cyber-Informed Engineering Briefing for ABET

Cyber-Informed Engineering (CIE) is an emerging method to integrate cybersecurity considerations into the conception, design, development, and operation of any physical system, energy or otherwise, to mitigate or even eliminate avenues for cyber-enabled attacks.?CIE concepts use design decisions and engineering controls to prioritize defense against the worst possible consequences of cyberattacks facing critical infrastructure systems and asset owners. These slides offer a deep dive into Cyber-Informed Engineering for engineering educators.

42 - ENGINEERING↗
DOE OSTI2016

Co‐culture engineering for microbial biosynthesis of 3‐amino‐benzoic acid in Escherichia coli

Abstract 3‐amino‐benzoic acid (3AB) is an important building block molecule for production of a wide range of important compounds such as natural products with various biological activities. In the present study, we established a microbial biosynthetic system for de novo 3AB production from the simple substrate glucose. First, the active 3AB biosynthetic pathway was reconstituted in the bacterium Escherichia coli , which resulted in the production of 1.5 mg/L 3AB. In an effort to improve the production, an E. coli ‐ E. coli co‐culture system was engineered to modularize the biosynthetic pathway between an upstream strain and an downstream strain. Specifically, the upstream biosynthetic module was contained in a fixed E. coli strain, whereas a series of E. coli strains were engineered to accommodate the downstream biosynthetic module and screened for optimal production performance. The best co‐culture system was found to improve 3AB production by 15 fold, compared to the mono‐culture approach. Further engineering of the co‐culture system resulted in biosynthesis of 48 mg/L 3AB. Our results demonstrate co‐culture engineering can be a powerful new approach in the broad field of metabolic engineering.

Zhang, Haoran↗
DOE OSTI2018

Engineered U7 snRNA mediates sustained splicing correction in erythroid cells from β-thalassemia/HbE patients

Highlights: • Defect of β{sup E}-globin pre-mRNA splicing was repaired by engineered splice-switching U7 snRNA. • Splice-switching oligonucleotide sequence was identified by a two-step tiling approach. • The engineered U7 snRNA improve pathology of erythroid cells from thalassemia patients. Repair of a splicing defect of β-globin pre-mRNA harboring hemoglobin E (HbE) mutation was successfully accomplished in erythroid cells from patients with β-thalassemia/HbE disorder by a synthetic splice-switching oligonucleotide (SSO). However, its application is limited by short-term effectiveness and requirement of lifelong periodic administration of SSO, especially for chronic diseases like thalassemias. Here, we engineered lentiviral vectors that stably express U7 small nuclear RNA (U7 snRNA) carrying the splice-switching sequence of the SSO that restores correct splicing of β{sup E}-globin pre-mRNA and achieves a long-term therapeutic effect. Using a two-step tiling approach, we systematically screened U7 snRNAs carrying splice-switching SSO sequences targeted to the cryptic 5′ splice site created by HbE mutation. We tested this approach and identified the most responsive element for mediating splicing correction in engineered U7 snRNAs in HeLa-β{sup E} cell model cell line. Remarkably, the U7 snRNA lentiviral vector (U7 βE4+1) targeted to this region effectively restored the correctly-spliced β{sup E}-globin mRNA for at least 5 months. Moreover, the effects of the U7 βE4+1 snRNA lentiviral vector were also evident as upregulation of the correctly-spliced β{sup E}-globin mRNA in erythroid progenitor cells from β-thalassemia/HbE patients treated with the vector, which led to improvements of pathologies in erythroid progenitor cells from thalassemia patients. These results suggest that the splicing correction of β{sup E}-globin pre-mRNA by the engineered U7 snRNA lentiviral vector provides a promising, long-term treatment for β-thalassemia/HbE.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Autoignition behavior of gasoline/ethanol blends at engine-relevant conditions

Ethanol is an attractive oxygenate increasingly used for blending with petroleum-derived gasoline yielding beneficial combustion and emissions behavior for a range of internal combustion engine schemes, including stoichiometric spark-ignition and low temperature combustion (LTC). As such, it is important to fundamentally understand the autoignition behavior of gasoline/ethanol blends. This work utilizes a rapid compression machine (RCM) and a homogeneous charge compression ignition (HCCI) engine to experimentally quantify changes in fuel reactivity, through ignition delay times and preliminary heat release, for blends of 0 to 30% vol./vol. into a full boiling range research gasoline (FACE-F). Diluted/stoichiometric and undiluted/fuel-lean conditions are explored covering a wide range of compressed temperatures and pressures relevant to conventional and advanced, gasoline combustion engines. Detailed chemical kinetic modeling is undertaken using a recently updated gasoline surrogate model in conjunction with a five-component surrogate to model the RCM experiments and provide chemical insight into the perturbative effects of ethanol on the autoignition process. The diluted/stoichiometric RCM measurements reveal that within the low-temperature regime ethanol retards first-stage and main ignition delay times, and suppresses both the rates and extents of low-temperature heat release (LTHR), while within the intermediate-temperature regime ethanol only causes slight changes. Good agreement of ignition delay time and preliminary heat release prediction is found between model and experimental results. Sensitivity and flux analyses further show that ethanol blending effects are dominated by the competition between the H-atom abstraction from ethanol and other fuel components by OH radical at low temperatures and by HO 2 radical at intermediate temperatures. These findings are consistent across both fuel loading conditions explored in this study. In addition, when HCCI engine experiments are mapped onto undiluted/lean RCM measurements under a constant combustion phasing scenario, good correspondence between the two apparatuses is observed for LTHR and start of high-temperature heat release. Finally, the current study highlights the importance of characterizing LTHR in predicting fuel behaviors in high-boost/low-temperature engines, and demonstrates that RCM experiments can provide an alternative, and more-efficient avenue for such characterization.

02 PETROLEUM↗
DOE OSTI2022

Advances in engineering algae for biofuel production

While algae demonstrate potential as a sustainable fuel source, low productivities limit the economic realization of algal biofuels. High-throughput strain engineering, omics-informed genome-scale modeling, and microbiome engineering are key technologies for enabling algal biofuels. High-throughput strain engineering efforts generate improved traits, including high biomass productivity and lipid content, in diverse algal species. Genome-scale models, constructed with the aid of omics data, provide insight into metabolic limitations and guide rational algal strain engineering efforts. As outdoor cultivation systems introduce exogenous organisms, microbiome engineering seeks to eliminate harmful organisms and introduce beneficial species. In conclusion, optimizing algal biomass production and lipid content using these technologies may overcome the productivity barrier for the commercialization of algal biofuels.

09 BIOMASS FUELS↗
DOE OSTI2022

A FAIR-compliant parts catalogue for genome engineering and expression control in Saccharomyces cerevisiae

The synthetic biology toolkit for baker's yeast, Saccharomyces cerevisiae, includes extensive genome engineering toolkits and parts repositories. However, with the increasing complexity of engineering tasks and versatile applications of this model eukaryote, there is a continued interest to expand and diversify the rational engineering capabilities in this chassis by FAIR (findable, accessible, interoperable, and reproducible) compliance. In this study, we designed and characterised 41 synthetic guide RNA sequences to expand the CRISPR-based genome engineering capabilities for easy and efficient replacement of genomically encoded elements. Moreover, we characterize in high temporal resolution 20 native promoters and 18 terminators using fluorescein and LUDOX CL-X as references for GFP expression and OD600 measurements, respectively. Additionally, all data and reported analysis is provided in a publicly accessible jupyter notebook providing a tool for researchers with low-coding skills to further explore the generated data as well as a template for researchers to write their own scripts. We expect the data, parts, and databases associated with this study to support a FAIR-compliant resource for further advancing the engineering of yeasts.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Engineering Escherichia coli for selective 1-decanol production using the reverse β-oxidation (rBOX) pathway

1-Decanol has great value in the pharmaceutical and fragrance industries and plays an important role in the chemical industry. Here, in this study, we engineered Escherichia coli to selectively synthesize 1-decanol by using enzymes of the core reverse β-oxidation (rBOX) pathway and termination module with overlapping chain-length specificity. Through screening for acyl-CoA reductase termination enzymes and proper regulation of rBOX pathway expression, a 1-decanol titer of 1.4 g/L was achieved. Further improvements were realized by engineering pyruvate dissimilation to ensure the generation of NADH through pyruvate dehydrogenase (PDH) and reducing byproduct synthesis via a tailored YigI thioesterase knockout, increasing 1-decanol titer to 1.9 g/L. The engineered strain produced about 4.4 g/L 1-decanol with a yield of 0.21 g/g in 36 hours in a bi-phasic fermentation that used a dodecane overlay to increase 1-decanol transport and reduce its toxicity. Adjustment of pathway expression (varying inducer concentration) and cell growth (oxygen availability) enabled 1-decanol production at 6.1 g/L (0.26 g/g yield) and 10.05 g/L (0.2 g/g yield) using rich in shake flasks and bioreactor, respectively. Remarkably, the use of minimal medium resulted in 1-decanol production at 100% specificity at 2.8 g/L (0.14 g/g yield) and a per cell mass yield higher than rich medium. These 1-decanol titers, yields and purity are at least 10-fold higher than others reported to date and the engineered strain shows great potential for industrial production. Taken together, our findings suggest that using rBOX pathway and termination enzymes of proper chain-length specificity in combination with optimal chassis engineering should be an effective approach for the selective production of alcohols.

1-decanol↗
DOE OSTI2017

Diagnostics of the Supernova Engine

The standard engine behind core-collapse supernovae is continuously evolving with increasingly detailed models. At this time, most simulations focus on an engine invoking turbulence above the proto-neutron star, sometimes termed the “convection-enhanced” engine. Finally, we review this engine and why it has become the standard for normal supernovae, focusing on a wide set of observations that provide insight into the supernova engine.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Using phage display for rational engineering of a higher-affinity humanized 3’ phosphohistidine-specific antibody

Abstract Histidine phosphorylation is a non-canonical post-translational modification (PTM), with 1-phosphohistidine (1-pHis) and 3-phosphohistidine (3-pHis) isoforms, that is understudied due to a lack of robust reagents, including high-affinity pHis-specific antibodies. Engineering pHis antibodies is challenging due to the labile nature of its phosphoramidate (P-N) bond. We developed a strategy for in vitro engineering of antibodies for the detection of native 3-pHis targets, in which the rabbit SC44-8 anti-3-pTza mAb is humanized into a scaffold (hSC44) that is suitable for phage display. Six unique Fab phage-displayed hSC44 scaffold libraries were screened for antibodies that bound 3-pHis with higher affinity and had specificity for 3-pHis versus 3-pTza. hSC44.20N32F L , the best engineered antibody, has ~10-fold higher affinity for 3-pHis than parental hSC44. Eleven new Fab structures, including the first antibody-pHis peptide structures, together with structural and quantum mechanical calculations, provided molecular insights into 3-pHis and 3-pTza discrimination by hSC44.20N32F L and the increased affinity obtained through engineering. We demonstrated the utility of these high-affinity 3-pHis-specific antibodies for the recognition of pHis proteins in mammalian cells by immunoblotting and immunofluorescence staining. Our work describes a general method for engineering labile PTM-specific antibodies and provides novel antibodies for investigating the role of 3-pHis in cell biology.

Martyn, Gregory D.↗
DOE OSTI2024

Advanced fuel fusion, phase space engineering, and structure-preserving geometric algorithms

Non-thermal advanced fuel fusion trades the requirement of a large amount of recirculating tritium in the system for that of large recirculating power. Phase space engineering technologies utilizing externally injected electromagnetic fields can be applied to meet the challenge of maintaining non-thermal particle distributions at a reasonable cost. The physical processes of the phase space engineering are studied from a theoretical and algorithmic perspective. It is emphasized that the operational space of phase space engineering is limited by the underpinning symplectic dynamics of charged particles. The phase space incompressibility according to the Liouville theorem is just one of many constraints, and Gromov's non-squeezing theorem determines the minimum footprint of the charged particles on every conjugate phase space plane. In this sense and level of sophistication, the mathematical abstraction of phase space engineering is symplectic topology. To simulate the processes of phase space engineering, such as the Maxwell demon and electromagnetic energy extraction, and to accurately calculate the minimum footprints of charged particles, recently developed structure-preserving geometric algorithms can be used. The family of algorithms conserves exactly, on discretized spacetime, symplecticity and thus incompressibility, non-squeezability, and symplectic capacities. The algorithms apply to the dynamics of charged particles under the influence of external electromagnetic fields as well as the charged particle–electromagnetic field system governed by the Vlasov–Maxwell equations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗