Search NASA⌕ Search

SEARCH · Search NASA

Results for “Equilibrium diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Electron-ion equilibrium and shock precursors in the northeast limb of the Cygnus Loop

We present an observational study using high-resolution echelle spectroscopy of collisionless shocks in the Cygnus Loop supernova remnant. Measured Hα line profiles constrain pre-shock heating processes, shock speeds, and electron-ion equilibration (T{sub e} /T{sub i} ). The shocks produce faint Hα emission line profiles, which are characterized by narrow and broad components. The narrow component is representative of the pre-shock conditions, while the broad component is produced after charge transfer between neutrals entering the shock and protons in the post-shock gas, thus reflecting the properties of the post-shock gas. We observe a diffuse Hα region extending about 2.'5 ahead of the shock with line width ∼29 km s{sup –1}, while the Hα profile of the shock itself consists of broader than expected narrow (36 km s{sup –1}) and broad (250 km s{sup –1}) components. The observed diffuse emission arises in a photoionization precursor heated to about 18,000 K by He I and He II emission from the shock, with additional narrow component broadening originating from a thin cosmic-ray precursor. Broad to narrow component intensity ratios of ∼1.0 imply full electron-ion temperature equilibration T{sub e} ≅ T{sub i} in the post-shock region. Broad component line widths indicate shock velocities of about 400 km s{sup –1}. Combining the shock velocities with proper motions suggests that the distance to the Cygnus Loop is ∼890 pc, significantly greater than the generally accepted upper limit of 637 pc.

79 ASTRONOMY AND ASTROPHYSICS↗

Equilibrium Cu-Ag nanoalloy structure formation revealed by in situ scanning transmission electron microscopy heating experiments

Using in situ scanning transmission electron microscopy heating experiments, we observed the formation of a 3-dimensional (3D) epitaxial Cu-core and Ag-shell equilibrium structure of a Cu-Ag nanoalloy. The structure was formed during the thermal interaction of Cu(∼12 nm) and Ag NPs(∼6 nm) at elevated temperatures (150–300 °C) by the Ag NPs initially wetting the Cu NP along its (111) surfaces at one or multiple locations forming epitaxial Ag/Cu (111) interfaces, followed by Ag atoms diffusing along the Cu surface. This phenomenon was confirmed through Monte Carlo simulations to be a nanoscale effect related to the large surface-to-volume ratio of the NPs.

36 MATERIALS SCIENCE↗

Axial magnetic flux amplification in Hall-magnetohydrodynamic simulations of externally magnetized z-pinches

It is shown that externally magnetized gas-puff z-pinches under compression can exhibit robust axial flux amplification under suitable axial boundary conditions. This effect relies upon the Hall term in the generalized Ohm's law to generate azimuthal currents in the presence of a driving axial electric field. Under dynamic compression, the total current tends to flow in a mostly force-free boundary layer, separating the predominately azimuthal field outside the layer and the predominately axial field inside the layer. The effect only appears to occur if the axial boundaries allow for outflow or absorption of electromagnetic energy. The effect is mitigated by imposing either periodic or conducting axial boundary conditions. A semi-analytic equilibrium analysis agrees with steady-state solutions of the time-dependent electron-magnetohydrodynamic equations and provides an estimate of the scaling of the boundary layer as well as suggesting a scenario for the formation of the boundary layer. When operative, the effect can significantly impede plasma compression due to the increase in axial flux that diffuses into the pre-compressed plasma or through the presence of conductors that inhibit movement of the generated axial flux. Several facilities have noted unusual implosion behavior in z-pinch experiments with applied axial fields that does not appear to be explainable within the standard magnetohydrodynamic model. In conclusion, it is suggested that these experiments can be explained by the axial flux amplification and concentration effect

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Revealing the Drag Instability in One-fluid Nonideal Magnetohydrodynamic Simulations of a 1D Isothermal C-shock

C-type shocks are believed to be ubiquitous in turbulent molecular clouds thanks to ambipolar diffusion. We investigate whether the drag instability in 1D isothermal C-shocks, inferred from the local linear theory of Gu & Chen, can appear in nonideal magnetohydrodynamic simulations. Two C-shock models (with narrow and broad steady-state shock widths) are considered to represent the typical environment of star-forming clouds. The ionization-recombination equilibrium is adopted for the one-fluid approach. In the 1D simulation, the inflow gas is continuously perturbed by a sinusoidal density fluctuation with a constant frequency. The perturbations clearly grow after entering the C-shock region until they start being damped at the transition to the post-shock region. We show that the profiles of a predominant Fourier mode extracted locally from the simulated growing perturbation match those of the growing mode derived from the linear analysis. Moreover, the local growth rate and wave frequency derived from the predominant mode generally agree with those from the linear theory. Therefore, we confirm the presence of the drag instability in simulated 1D isothermal C-shocks. We also explore the nonlinear behavior of the instability by imposing larger-amplitude perturbations to the simulation. We find that the drag instability is subject to wave steepening, leading to saturated perturbation growth. Issues concerning local analysis, nonlinear effects, one-fluid approach, and astrophysical applications are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluation of the propensity of niobium to absorb hydrogen during fabrication of superconducting radio frequency cavities for particle accelerators

During the fabrication of niobium superconducting radio frequency (SRF) particle accelerator cavities procedures are used that chemically or mechanically remove the passivating surface film of niobium pentoxide (N b 2O 5 ). Removal of this film will expose the underlying niobium metal and allow it to react with the processing environment. If these reactions produce hydrogen at sufficient concentrations and rates, then hydrogen will be absorbed and diffuse into the metal. High hydrogen activities could result in supersaturation and the nucleation of hydride phases. If the metal repassivates at the conclusion of the processing step and the passive film blocks hydrogen egress, then the absorbed hydrogen or hydrides could be retained and alter the performance of the metal during subsequent processing steps or in-service. This report examines the feasibility of this hypothesis by first identifying the postulated events, conditions, and reactions and then determining if each is consistent with accepted scientific principles, literature, and data. Established precedent for similar events in other systems was found in the scientific literature and thermodynamic analysis found that the postulated reactions were not only energetically favorable, but produced large driving forces. The hydrogen activity or fugacity required for the reactions to be at equilibrium was determined to indicate the propensity for hydrogen evolution, absorption, and hydride nucleation. The influence of processing conditions and kinetics on the proximity of hydrogen surface coverage to these theoretical values is discussed. This examination found that the hypothesis of hydrogen absorption during SRF processing is consistent with published scientific literature and thermodynamic principles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lifetime-resolved photon-correlation Fourier spectroscopy

The excited state population of single solid-state emitters is subjected to energy fluctuations around the equilibrium driven by the bath and relaxation through the emission of phonons or photons. Simultaneous measurement of the associated spectral dynamics requires a technique with a high spectral and temporal resolution with an additionally high temporal dynamic range. We propose a pulsed excitation-laser analog of photon-correlation Fourier spectroscopy (PCFS), which extracts the linewidth and spectral diffusion dynamics along the emission lifetime trajectory of the emitter, effectively discriminating spectral dynamics from relaxation and bath fluctuations . This lifetime-resolved PCFS correlates photon-pairs at the output arm of a Michelson interferometer in both their time-delay between laser-excitation and photon-detection T and the time-delay between two photons τ . We propose the utility of the technique for systems with changing relative contributions to the emission from multiple states, for example, quantum emitters exhibiting phonon-mediated exchange between different fine-structure states.

36 MATERIALS SCIENCE↗

A CLASS OF PHYSICALLY MOTIVATED CLOSURES FOR RADIATION HYDRODYNAMICS

Radiative transfer and radiation hydrodynamics use the relativistic Boltzmann equation to describe the kinetics of photons. It is difficult to solve the six-dimensional time-dependent transfer equation unless the problem is highly symmetric or in equilibrium. When the radiation field is smooth, it is natural to take angular moments of the transfer equation to reduce the degrees of freedom. However, low order moment equations contain terms that depend on higher order moments. To close the system of moment equations, approximations are made to truncate this hierarchy. Popular closures used in astrophysics include flux-limited diffusion and the M{sub 1} closure, which are rather ad hoc and do not necessarily capture the correct physics. In this paper, we propose a new class of closures for radiative transfer and radiation hydrodynamics. We start from a different perspective and highlight the consistency of a fully relativistic formalism. We present a generic framework to approximate radiative transfer based on relativistic Grad's moment method. We then derive a 14-field method that minimizes unphysical photon self-interaction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Hotspot’s Better Half: Non-Equilibrium Intra-Molecular Strain in Shock Physics

Shockwave interactions with a material’s microstructure localizes energy into hotspots, which act as nucleation sites for complex processes such as phase transformations and chemical reactions. To date, hotspots have been described via their temperature fields. Nonreactive, all-atom molecular dynamics simulations of shock-induced pore collapse in a molecular crystal show that more energy is localized as potential energy (PE) than can be inferred from the temperature field and that PE localization persists beyond thermal diffusion. Furthermore, the origin of the PE hotspot is traced to large intramolecular strains, storing energy in modes readily available for chemical decomposition.

36 MATERIALS SCIENCE↗

An analysis of hydrated proton diffusion in ab initio molecular dynamics

A detailed understanding of the inherently multiscale proton transport process raises a number of scientifically challenging questions. For example, there remain many (partially addressed) questions on the molecular mechanism for long-range proton migration and the potential for the formation of long-lived traps giving rise to burst-and-rest proton dynamics. Using results from a sizeable collection of ab initio molecular dynamics (AIMD) simulations (totaling ∼2.7 ns) with various density functional approximations (Becke-Lee-Yang-Parr (BLYP), BLYP–D3, Hamprecht-Cohen-Tozer-Handy, B3LYP) and temperatures (300–330 K), equilibrium and dynamical properties of one excess proton and 128 water molecules are studied. Two features in particular (concerted hops and weak hydrogen-bond donors) are investigated to identify modes in the system that are strongly correlated with the onset of periods of burst-and-rest dynamics. The question of concerted hops seeks to identify those time scales over which long-range proton transport can be classified as a series of sequential water hopping events or as a near-simultaneous concerted process along compressed water wires. The coupling of the observed burst-and-rest dynamics with motions of a fourth neighboring water molecule (a weak hydrogen-bond donor) solvating the protonated water molecule is also investigated. The presence (absence) of hydrogen bonds involving this fourth water molecule before and after successful proton hopping events is found to be strongly correlated with periods of burst (rest) dynamics (and consistent with pre-solvation concepts). By analyzing several realizations of the AIMD trajectories on the 100-ps time scale, convergence of statistics can be assessed. For instance, it was observed that the probability for a fourth water molecule to approach the hydronium, if not already proximal at the beginning of the lifetime of the hydronium, is very low, indicative of the formation of stable void regions. Furthermore, the correlations of the neighboring water atoms are identified as the fourth water approaches the hydronium. Finally, the temperature effects on structural and dynamical properties are studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase Constituents and Microstructure of Interaction Layer Formed in U-Mo Alloys vs Al Diffusion Couples Annealed at 873 K (600°C)

U-Mo dispersion and monolithic fuels are being developed to fulfill the requirements for research reactors, under the Reduced Enrichment for Research and Test Reactors program. In dispersion fuels, particles of U-Mo alloys are embedded in the Al-alloy matrix, while in monolithic fuels, U-Mo monoliths are roll bonded to the Al-alloy matrix. In this study, interdiffusion and microstructural development in the solid-to-solid diffusion couples, namely, U-15.7 at. pct Mo (7 wt pct Mo) vs pure Al, U-21.6 at. pct Mo (10 wt pct Mo) vs pure Al, and U-25.3 at. pct Mo (12 wt pct Mo) vs pure Al, annealed at 873 K (600 degrees C) for 24 hours, were examined in detail. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electron probe microanalysis (EPMA) were employed to examine the development of a very fine multiphase interaction layer with an approximately constant average composition of 80 at. pct Al. Extensive TEM was carried out to identify the constituent phases across the interaction layer based on selected area electron diffraction and convergent beam electron diffraction (CBED). The cubic-UAl3, orthorhombic-UAl4, hexagonal-U6Mo4Al43, and cubic-UMo2Al20 phases were identified within the interaction layer that included two- and three-phase layers. Residual stress from large differences in molar volume, evidenced by vertical cracks within the interaction layer, high Al mobility, Mo supersaturation, and partitioning toward equilibrium in the interdiffusion zone were employed to describe the complex microstructure and phase constituents observed. A mechanism by compositional modification of the Al alloy is explored to mitigate the development of the U6Mo4Al43 phase, which exhibits poor irradiation behavior that includes void formation and swelling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Atomistics of vapour–liquid–solid nanowire growth

Vapour–liquid–solid route and its variants are routinely used for scalable synthesis of semiconducting nanowires, yet the fundamental growth processes remain unknown. Here we employ atomic-scale computations based on model potentials to study the stability and growth of gold-catalysed silicon nanowires. Equilibrium studies uncover segregation at the solid-like surface of the catalyst particle, a liquid AuSi droplet, and a silicon-rich droplet–nanowire interface enveloped by heterogeneous truncating facets. Supersaturation of the droplets leads to rapid one-dimensional growth on the truncating facets and much slower nucleation-controlled two-dimensional growth on the main facet. Surface diffusion is suppressed and the excess Si flux occurs through the droplet bulk which, together with the Si-rich interface and contact line, lowers the nucleation barrier on the main facet. The ensuing step flow is modified by Au diffusion away from the step edges. Our study highlights key interfacial characteristics for morphological and compositional control of semiconducting nanowire arrays.

36 MATERIALS SCIENCE↗

Phase-field model of freeze casting

Directional solidification of water-based solutions has emerged as a versatile technique for templating hierarchical porous materials. However, the underlying mechanisms of pattern formation remain incompletely understood. In this work, we present a detailed derivation and analysis of a quantitative phase-field model for simulating this nonequilibrium process. The phase-field model extends the thin-interface formulation of dilute binary alloy solidification with antitrapping to incorporate the highly anisotropic energetic and kinetic properties of the partially faceted ice-water interface. This interface is faceted in the basal plane normal to the ⟨0001⟩ directions and atomically rough in other directions within the basal plane. On the basal plane, the model reproduces a linear or nonlinear relationship between the interface growth rate and the kinetic undercooling that can be linked to experimental measurements. In both cases, spontaneous parity breaking of the solidification front is observed when the preferred growth direction is aligned with the temperature gradient. This phenomenon leads to the formation of partially faceted ice lamellae that drift laterally in one of the ⟨0001⟩ directions. Here, we demonstrate that the drifting velocity of the ice lamellae is controlled by the kinetics on the basal plane and converges as the thickness of the diffuse solid-liquid interface decreases. Furthermore, we examine the effect of the form of the kinetic anisotropy, which is chosen here such that the inverse of the kinetic coefficient varies linearly from a finite value in the ⟨0001⟩ directions to zero in all other directions within the basal plane, consistent with the assumption that the interface grows in local thermodynamic equilibrium in this plane. Our results indicate that the drifting velocity of ice lamellae is not affected by the slope of this linear relation, and the radius and undercooling at the tip of an ice lamella converge at relatively small slope values. Consequently, the phase-field simulations remain quantitative with computationally tractable choices of both the interface thickness and the slope assumed in the form of the kinetic anisotropy.

Materials science↗

EXTENSION OF THE MURAM RADIATIVE MHD CODE FOR CORONAL SIMULATIONS

We present a new version of the MURaM radiative magnetohydrodynamics (MHD) code that allows for simulations spanning from the upper convection zone into the solar corona. We implement the relevant coronal physics in terms of optically thin radiative loss, field aligned heat conduction, and an equilibrium ionization equation of state. We artificially limit the coronal Alfvén and heat conduction speeds to computationally manageable values using an approximation to semi-relativistic MHD with an artificially reduced speed of light (Boris correction). We present example solutions ranging from quiet to active Sun in order to verify the validity of our approach. We quantify the role of numerical diffusivity for the effective coronal heating. We find that the (numerical) magnetic Prandtl number determines the ratio of resistive to viscous heating and that owing to the very large magnetic Prandtl number of the solar corona, heating is expected to happen predominantly through viscous dissipation. We find that reasonable solutions can be obtained with values of the reduced speed of light just marginally larger than the maximum sound speed. Overall this leads to a fully explicit code that can compute the time evolution of the solar corona in response to photospheric driving using numerical time steps not much smaller than 0.1 s. Numerical simulations of the coronal response to flux emergence covering a time span of a few days are well within reach using this approach.

79 ASTRONOMY AND ASTROPHYSICS↗

Selective Uptake of Ethane/Ethylene Mixtures by UTSA-280 is Driven by Reversibly Coordinated Water Defects

The metal–organic framework (MOF) UTSA-280 has been shown previously to separate ethane/ethylene mixtures. We show that this separation is kinetic; if full equilibrium is reached, the MOF is not selective. The time scales associated with this kinetic separation are sufficient to make the material potentially interesting for practical separations. The observation of kinetic separation is surprising because the MOF’s one-dimensional (1D) channels are small enough that molecular motion along the channels would be expected to take place by single-file diffusion, which is not observed. We show using a combination of experimental and modeling techniques that diffusion of molecules between adjacent 1D channels through local defects associated with coordinated water molecules allows net mixing of molecules and, moreover, that this process is potentially responsible for the selective nature of the observed kinetic separation. We show how activation and regeneration conditions play an essential role in controlling the density of these local defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Can we observe the ion-neutral drift velocity in prestellar cores?

Given the low-ionization fraction of molecular clouds, ambipolar diffusion is thought to be an integral process in star formation. However, chemical and radiative-transfer effects, observational challenges, and the fact that the ion-neutral drift velocity is inherently very small render a definite detection of ambipolar diffusion extremely non-trivial. Here, we study the ion-neutral drift velocity in a suite of chemodynamical, non-ideal magnetohydrodynamic (MHD), two-dimensional axisymmetric simulations of prestellar cores where we alter the temperature, cosmic-ray ionization rate, visual extinction, mass-to-flux ratio, and chemical evolution. Subsequently, we perform a number of non-local thermodynamic equilibrium (non-LTE) radiative-transfer calculations considering various idealized and non-idealized scenarios in order to assess which factor (chemistry, radiative transfer, and/or observational difficulties) is the most challenging to overcome in our efforts to detect the ion-neutral drift velocity. We find that temperature has a significant effect in the amplitude of the drift velocity with the coldest modelled cores (T = 6 K) exhibiting drift velocities comparable to the sound speed. Against expectations, we find that in idealized scenarios (where two species are perfectly chemically co-evolving) the drift velocity ‘survives’ radiative-transfer effects and can in principle be observed. However, we find that observational challenges and chemical effects can significantly hinder our view of the ion-neutral drift velocity. Finally, we propose that HCN and HCNH + ⁠, being chemically co-evolving, could be used in future observational studies aiming to measure the ion-neutral drift velocity.

79 ASTRONOMY AND ASTROPHYSICS↗

Hydrogen trapping at neutron irradiation produced defects in recrystallized alpha annealed Zircaloy-4 - 2016-0060

Hydrogen is absorbed into zirconium alloy-clad fuel elements and structural components as a result of water-side corrosion in both pressurized water reactor (PWR) and boiling water reactor (BWR) environments. Increasing hydrogen concentrations in the zirconium alloy affect both its mechanical properties and dimensional stability. It is well known that hydrogen can diffuse relatively rapidly through zirconium base alloys (in relation to the lifetime of the components) in response to solid solution concentration, temperature, and stress gradients. Migration of hydrogen within a component through its life must be considered to reliably predict the performance of the component through life and even post-service life. Many of the physical properties needed to describe this process, such as the solubility of hydrogen in zirconium alloys, diffusion coefficients of hydrogen through zirconium alloys, and the Soret effect within zirconium alloys, already have been published. Many of these measurements have been made outside of the reactor core environment on nonirradiated zirconium alloys. This paper presents in-reactor, isothermal hydrogen diffusion data that show an effect of the in-reactor radiation environment on the final measured hydrogen concentrations. Samples used are similar to the hydrogen diffusion couples used by several investigators in the past to measure the hydride dissolution solvus as a function of temperature. The experimental results are interpreted on the basis of a physical model for hydrogen trapping that hypothesizes that hydrogen in solid solution in the zirconium lattice comes into thermodynamic equilibria with the hydride phase as well as into a steady-state equilibrium with trapping at irradiation-induced defects within the lattice. In agreement with the model, the irradiation effect on final measured concentrations is seen to be a decreasing function of the irradiation temperature between ∼271 deg. C and 354 deg. C, with any effect essentially eliminated by an irradiation temperature of 354 deg. C. (authors)

36 MATERIALS SCIENCE↗

Radionuclide Migration at a Plowshare Program Site: the Gasbuggy Underground Nuclear Test Site, San Juan County, New Mexico - 17019

Project Gasbuggy in northwest New Mexico was the first of three subsurface nuclear tests the U.S. Atomic Energy Commission conducted to evaluate the potential to enhance the production of natural gas from low-permeability geologic formations. In 1967, a 29-kiloton nuclear device was detonated in the Lewis Shale (marine shale and siltstone), 1,292 m below the land surface. The detonation vaporized a cavity into which overlying rock collapsed, forming a 101-m high rubble-filled chimney with a radius of 25 m. Explosion-generated fractures extended between 120 m and 150 m from the working point (detonation location). Most of the radionuclides generated from the explosion remain in the cavity melt glass or have decayed to negligible amounts; tritium radioactivity, however, is still high enough and potentially mobile enough to be of concern. Tritium is able to exchange with stable hydrogen and form liquid water and water vapor; under two-phase (liquid and gas) reservoir conditions the majority of tritium is stored as liquid water and volatilises only to restore equilibrium conditions as gas is removed. A numerical model was developed to examine the migration of tritium in both phases through the fractured shale and sandstone under present conditions. The results suggest that tritium has migrated only 110 m from the working point between 1967 and 2014. Although tritium is able to exchange between the gas and aqueous phases, the faster-diffusing gas phase is responsible for most of the tritium transport from the chimney. A hypothetical producing gas well located 340 m from the working point was added to the model to determine if tritiated water vapor (HTO) could migrate toward the well; results show that, because the low gas velocities could not compete with the high rate of radioactive decay, tritium would not reach the well. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗