Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Variation in band offsets at ZnO/Sn:In2O3 (ITO) heterojunctions measured by x-ray photoelectron spectroscopy

Rational design and optimization of efficient photovoltaics requires fundamental knowledge of both the materials properties of the individual components and the conduction and valence band alignments at the materials interfaces. Efficient collection of electrons photogenerated in the absorber material requires a small or zero conduction band offset at both the absorber/n-type semiconductor and the n-type semiconductor/electrode interfaces. Negative conduction band offsets result in an energy barrier to electron injection, while large positive conduction band offsets (a “cliff” arrangement) result in too much energy lost during injection. However, it is difficult to predict heterojunction band offsets from bulk materials properties. Experimental band alignments of semiconductor heterojunctions rarely conform to the Anderson model,1 which assumes the band alignments are determined solely by differences in the electron affinity of the two semiconductors. Chemical bonds at the heterojunction interface give rise to an interfacial dipole which influences the interfacial band alignment. Thus, the complex interplay between electron affinity differences, Fermi level matching, interface-induced gap states, and band bending determine heterojunction band alignments.2-5 Band alignments can also be modified by doping, point defects, or control of non-stoichiometry at the interface; since these parameters can be affected by processing conditions, they offer a mechanism to modify the band alignments of a given heterojunction system.

36 MATERIALS SCIENCE↗

Superconducting properties of (Pb{sub 0.05}Sn{sub 0.95})Te doped with indium under conditions of hydrostatic compression

The superconducting properties of Pb{sub 0.05}Sn{sub 0.95}Te semiconductor alloy doped with 5 at % of In are investigated at a hydrostatic pressure of P < 7 kbar. At increasing pressure P > 1.35 kbar and T ≥ 1.3 K, the resistivity step to ρ = 0 in the temperature and magnetic-field dependences ρ(T) and ρ(H), which corresponds to the transition to the superconducting state, disappears. The experimental results are indicative of a decrease in the density of states at the Fermi level with increasing pressure, which can be interpreted as an indium-level shift deep into the valence band. The obtained data refine and supplement the results of studies devoted to investigation of the baric dependences of the critical parameters of the superconducting transition in (Pb{sub z}Sn{sub 1–z}){sub 0.95}In{sub 0.05}Te with varying lead content z.

36 MATERIALS SCIENCE↗

Towards forming-free resistive switching in oxygen engineered HfO{sub 2−x}

We have investigated the resistive switching behavior in stoichiometric HfO{sub 2} and oxygen-deficient HfO{sub 2−x} thin films grown on TiN electrodes using reactive molecular beam epitaxy. Oxygen defect states were controlled by the flow of oxygen radicals during thin film growth. Hard X-ray photoelectron spectroscopy confirmed the presence of sub-stoichiometric hafnium oxide and defect states near the Fermi level. The oxygen deficient HfO{sub 2−x} thin films show bipolar switching with an electroforming occurring at low voltages and low operating currents, paving the way for almost forming-free devices for low-power applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gate-tunable coherent transport in Se-capped Bi{sub 2}Se{sub 3} grown on amorphous SiO{sub 2}/Si

A topological insulator (TI) is an exotic material that has a bulk insulating gap and metallic surface states with unique spin-momentum locking characteristics. Despite its various important applications, large scale integration of TI into MOSFET technologies and its coherent transport study are still rarely explored. Here, we report the growth of high quality Bi{sub 2}Se{sub 3} thin film on amorphous SiO{sub 2}/Si substrate using MBE. By controlling the thickness of the film at ∼7 nm and capping the as grown film in situ with a 2 nm-thick Se layer, largest electrostatic field effect is obtained and the resistance is changed by almost 300%. More importantly, pronounced gate-tunable weak antilocalization (WAL) is observed, which refers to modulation of α from ∼−0.55 to ∼−0.2 by applying a back gate voltage. The analysis herein suggests that the significant gate-tunable WAL is attributable to the transition from weak disorder into intermediate disorder regime when the Fermi level is shifted downward by increasing the negative back gate voltage. Our findings may pave the ways towards the development of TI-based MOSFET and are promising for the applications of electric-field controlled spintronic and magnetic device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DENSITY-FUNCTIONAL STUDY OF U-Mo AND U-Zr ALLOYS

Density-functional theory previously used to describe phase equilibria in U-Zr alloys [A. Landa, P. Soederlind, P.E.A. Turchi, J. Alloys Comp. 478 (2009) 103-110] is extended to investigate the ground-state properties of U-Mo solid solutions. We discuss how the heat of formation in both alloys correlates with the charge transfer between the alloy components, and how the specific behavior of the density of states in the vicinity of the Fermi level promotes the stabilization of the U{sub 2}Mo compound. Our calculations prove that, due to the existence of a single {gamma}-phase over the typical fuel operation temperatures, {gamma}-U-Mo alloys should indeed have much lower constituent redistribution than {gamma}-U-Zr alloys for which binodal decomposition causes a high degree of constituent redistribution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of substitutional defects on Kambersky damping in L1{sub 0} magnetic materials

Kambersky damping, representing the loss of magnetic energy from the electrons to the lattice through the spin orbit interaction, is calculated for L1{sub 0} FePt, FePd, CoPt, and CoPd alloys versus chemical degree of order. When more substitutional defects exist in the alloys, damping is predicted to increase due to the increase of the spin-flip channels allowed by the broken symmetry. It is demonstrated that this corresponds to an enhanced density of states (DOS) at the Fermi level, owing to the rounding of the DOS with loss of long-range order. Both the damping and the DOS of the Co-based alloy are found to be less affected by the disorder. Pd-based alloys are predicted to have lower damping than Pt-based alloys, making them more suitable for high density spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quaternary AlInGaN/InGaN quantum well on vicinal c-plane substrate for high emission intensity of green wavelengths

Electronic and optical properties of non-trivial semipolar AlInGaN/InGaN quantum well (QW) structures are investigated by using the multiband effective-mass theory and non-Markovian optical model. On vicinal c-plane GaN substrate miscut by a small angle (θ < 40°) from c-plane, the AlInGaN/InGaN system is shown to have ∼3 times larger spontaneous emission peak intensity than the conventional InGaN/GaN system at green wavelength. It is attributed to much larger optical matrix element of the quaternary AlInGaN/InGaN system, derived from the reduction of internal electric field induced by polarizations. This effect exceeds the performance-degrading factor of smaller quasi-Fermi-level separation for the quaternary AlInGaN/InGaN system than that for the conventional InGaN/GaN system. Results indicate that the use of quaternary III-nitride QWs on vicinal substrates may be beneficial in improving the performance of optical devices emitting green light.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

WH[eta] under pressure

An initial observation of the formation of WH under pressure from W gaskets surrounding hydrogen in diamond anvil cells led to a theoretical study of tungsten hydride phases. At P = 1 atm no stoichiometry is found to be stable with respect to separation into the elements, but as the pressure is raised WH{sub n} (n = 1-6, 8) stoichiometries are metastable or stable. WH and WH{sub 4} are calculated to be stable at P > 15 GPa, WH{sub 2} becomes stable at P > 100 GPa and WH{sub 6} at P > 150 GPa. In agreement with experiment, the structure computed for WH is anti-NiAs. WH{sub 2} shares with WH a hexagonal arrangement of tungsten atoms, with hydrogen atoms occupying octahedral and tetrahedral holes. For WH{sub 4} the W atoms are in a distorted fcc arrangement. As the number of hydrogens rises, the coordination of W by H increases correspondingly, leading to a twelve-coordinated W in WH{sub 6}. In WH{sub 8} H{sub 2} units also develop. All of the hydrides considered should be metallic at high pressure, though the Fermi levels of WH{sub 4} and WH{sub 6} lie in a deep pseudogap. Prodded by these theoretical studies, experiments were then undertaken to seek phases other than WH, exploring a variety of experimental conditions that would favor further reaction. Though a better preparation and characterization of WH resulted, no higher hydrides have as yet been found.

08 HYDROGEN↗

Positive Vibrational Entropy of Chemical Ordering in FeV

Inelastic neutron scattering and nuclear resonant inelastic x-ray scattering were used to measure phonon spectra of FeV as a B2 ordered compound and as a bcc solid solution. The two data sets were combined to give an accurate phonon density of states, and the phonon partial densities of states for V and Fe atoms. Contrary to the behavior of ordering alloys studied to date, the phonons in the B2 ordered phase are softer than in the solid solution. Ordering increases the vibrational entropy by +0.22 {+-} 0.03 k{sub B}/atom, which stabilizes the ordered phase to higher temperatures. First-principles calculations show that the number of electronic states at the Fermi level increases upon ordering, enhancing the screening between ions, and reducing the interatomic force constants. The effect of screening is larger at the V atomic sites than at the Fe atomic sites.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electronic properties of the interface between hexadecafluoro copper phthalocyanine and unsubstituted copper phthalocyanine films

The formation of an interface during the deposition of unsubstituted copper phthalocyanine (CuPc) films on the surface of hexadecafluoro copper phthalocyanine (F{sub 16}-CuPc) films is studied. An incident low-energy electron beam with energies from 0 to 25 eV is used to test the surface under study according to the very-low-energy electron-diffraction technique (VLEED) in the mode of total current spectroscopy. For F{sub 16}-CuPc films, the structure of the maxima in the total current spectra and its main differences from the structure of the maxima for the CuPc film are determined in the energy range from 5 to 15 eV above the Fermi level. The differences in the structure of vacant electron orbitals for CuPc and F{sub 16}-CuPc are also revealed using density functional theory calculations. As a result of an analysis of variations in the intensities of the total current spectra of the CuPc and F{sub 16}-CuPc films, it is assumed that an intermediate layer up to 1 nm thick appears during the formation of an interface between these films, which is characterized by a spread of the features in the total current spectrum. The height, width, and change in the work function are determined for the studied F{sub 16}-CuPc/NuPc interface barrier. A decrease in the level of vacuum by 0.7 eV occurs in the boundary region, which corresponds to electron density transfer from the CuPc film toward the F{sub 16}-CuPc substrate.

36 MATERIALS SCIENCE↗

Synthesis, electronic structure, and Raman scattering of phosphorous-doped single-wall carbon nanotubes

Substitutional phosphorous doping in single-wall carbon nanotubes (SWNTs) is investigated by density functional theory and resonance Raman spectroscopy. Electronic structure calculations predict charge localization on the phosphorus atom, which is also responsible of generating non-dispersive valence and conduction bands close to the Fermi level. Analysis of electron and phonon renormalization in the double-resonance Raman process confirms the different nature of the phosphorous donor doping (localized) when compared to nitrogen substitutional doping (non-localized) in SWNTs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Basic study for the construction of solar cell using CdS photocatalysts and Na{sub 2}S{sub 4} electrolyte

Photoexcited electrons pathway from thin film consisting of semiconductor particles to electrode was tried to develop by using conducting polymers. PEDOT/PSS and polyaniline was selected as transparent conducting polymer material. In the case of the cell consisted by using polyaniline, it was confirmed that conductive emeraldine salt stated polyaniline converted to non-conductive emeraldine base state because of contact with strong basic Na{sub 2}S{sub 4} electrolyte solution. On the other hand, as regards the cell with PEDOT/PSS, it was expected that positive and negative electrode short-circuited and/or Schottky junction was formed between CdS and PEDOT/PSS. The formation of Schottky junction between CdS and PEDOT/PSS was reduced the kinetic energy of the photoexcited electrons to 5.1eV which was the Fermi level of PEDOT. These electrons could not reduce Na{sub 2}S{sub 4} electrolyte solution since oxidation-reduction potential was 4.1eV. As a result, it considered that photoexcited electrons transfer was restricted, which read the decreasement of mobility of photoexcited electron, while the cell “without” PEDOT/PSS could operate as a solar cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, electronic and elastic properties of REIr{sub 2} (RE=La and Ce) Laves phase compounds

REIr{sub 2} (RE = La and Ce) Laves phase intermetallic compounds were investigated with respect to their structural, electronic and elastic properties using full potential linearized augmented plane wave (FP-LAPW) method within generalized gradient approximation (GGA) as implemented in WIEN2k code. The ground state properties such as lattice constants (a{sub 0}), bulk modulus (B), pressure derivative of bulk modulus (B′) and density of state at Fermi level N(E{sub F}) have been obtained by optimization method. The electronic structure (BS, TDOS and PDOS) reveals that these Laves phase compounds are metallic in nature. The calculated elastic constants indicate that these compounds are mechanically stable at ambient pressure and found to be ductile in nature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bulk and surface characterization of In2O3(001) single crystal

A comprehensive bulk and surface investigation of high-quality In2O3(001) single crystals is reported. The transparent-yellow, cube-shaped single crystals were grown using the flux method. ICP-MS measurements reveal small residues of Pb, Mg and Pt in the crystals. Four-point-probe measurements show a resistivity of 2 0.5 105 cm, which translates into a carrier concentration of 1012 cm-3. The results from X-ray diffraction (XRD) measurements revise the lattice constant to 10.1150(5) from the previously accepted value of 10.117 . Scanning Tunneling Microscopy (STM) images of a reduced (sputtered/annealed) surface show a step height of 5 , which indicates a preference for one type of surface termination. A combination of low-energy ion scattering (LEIS) and atomically resolved STM indicates an indium-terminated surface with small islands of 2.5 height, which corresponds to a strongly distorted indium lattice. Scanning Tunneling Spectroscopy (STS) reveals a pronounced surface state at the Fermi Level (EF). Photoelectron Spectroscopy (PES) shows additional, deep-lying band gap states, which can be removed by exposure of the surface to activated oxygen. Oxidation also results in a shoulder at the O 1s core level at a higher binding energy, possibly indicative of a surface peroxide species. A downward band bending of 0.4 eV and an upward band bending of ~0.1 eV is observed for the reduced and oxidized surfaces, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of top metal contact on the electrical properties of suspended spiral multiwalled carbon nanotube

The electrical transport behavior of individual spiral multiwalled carbon nanotube (MWCNT), functionalized via chemical route, has been investigated. The electrical current and conductance of such dangling bond attached tube, has been increased, after deposition of platinum (Pt) metal contacts at the two ends using electron beam induced deposition technique (EBID). The increment in the conductance is explained in terms of the change in the density of the states (DOS) near the Fermi level by dangling bonds and Pt atoms presence on the tube. Scanning electron microscope (SEM) image confirms its spiral nature after functionalization. Current –voltage measurements reveal a significant enhancement in the electrical transport of the same tube after the deposition of side metal contact. These results can be useful for the fabrication of nanoelectronic devices.

36 MATERIALS SCIENCE↗

The effect of irradiation with electrons on the electrical parameters of Hg{sub 3}In{sub 2}Te{sub 6}

The results of studying the electrical properties of Hg{sub 3}In{sub 2}Te{sub 6} crystals irradiated with electrons with the energy E{sub e} = 18 MeV and the dose D = 4 Multiplication-Sign 10{sup 16} cm{sup -2} are reported. It is shown that, irrespective of the charge-carrier concentration in the initial material, the Hg{sub 3}In{sub 2}Te{sub 6} samples acquire the charge-carrier concentration (1.6-1.8) Multiplication-Sign 10{sup 13} cm{sup -3} after irradiation. The phenomenon of Fermi level pinning in an irradiated material is discussed. The initial charge-carrier concentration, which remains virtually unchanged after irradiation and which ensures the high radiation resistance of Hg{sub 3}In{sub 2}Te{sub 6} crystals, corresponds to a compensated material, similar to an intrinsic semiconductor at T > 260 K.

36 MATERIALS SCIENCE↗

Properties of native defects in InI for potential radiation detector application

Heavy-metal halide semiconductors have attracted much interest recently for their potential applications in radiation detection because the large atomic numbers (high Z) of their constituent elements enable efficient radiation absorption and their large band gaps allow room temperature operation. However, defect properties of these halides and their connection to carrier transport are little known. In this paper, we present first-principles calculations on native defects in InI, which is a promising material for applications in room temperature radiation detection. The important findings are: (1) anion and cation vacancies (Schottky defects) form the dominant low-energy defects that can pin the Fermi level close to midgap, leading to high resistivity that is required for a good radiation detector material; (2) the anion vacancy in InI induces a deep electron trap, which should reduce electron mobility-lifetime product in InI; (3) low diffusion barriers of vacancies could be responsible for the observed polarization phenomenon at room temperature

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗