Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hall effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Growth, characterization, and Chern insulator state in MnBi 2⁢ Te 4 via the chemical vapor transport method

As the first intrinsic antiferromagnetic topological insulator, MnBi 2 Te 4 has provided a platform to investigate the interplay of band topology and magnetism as well as the emergent phenomena arising from such an interplay. Here we report the chemical-vapor-transport (CVT) growth and characterization of MnBi 2 Te 4 , as well as the observation of the field-induced quantized Hall conductance in 6-layer devices. Through comparative studies between our CVT-grown and flux-grown MnBi 2 Te 4 via magnetic, transport, scanning tunneling microscopy, and angle-resolved photoemission spectroscopy measurements, we find that CVT-grown MnBi 2 Te 4 is marked with higher Mn occupancy on the Mn site, slightly higher Mn Bi antisites, smaller carrier concentration, and a Fermi level closer to the Dirac point. Furthermore, a 6-layer device made from the CVT-grown sample shows by far the highest mobility of 2500 cm 2 V s in MnBi 2 Te 4 devices with the quantized Hall conductance appearing at 1.8 K and 8 T. Furthermore, our study provides a route to obtain high-quality single crystals of MnBi 2 Te 4 that are promising to make superior devices and realize emergent phenomena, such as the layer Hall effect and quantized anomalous Hall effect, etc.

36 MATERIALS SCIENCE↗

Magnetic Analog Random-Access Memory

Proposed integrated, solid-state, analog random-access memory base on principle of magnetic writing and magnetoresistive reading. Current in writing conductor magnetizes storage layer. Remanent magnetization in storage layer penetrates readout layer and detected by magnetoresistive effect or Hall effect. Memory cells are part of integrated circuit including associated reading and writing transistors. Intended to provide high storage density and rapid access, nonvolatile, consumes little power, and relatively invulnerable to ionizing radiation.

Katti, Romney R.↗

MPD work at MIT

MPD work at MIT is presented in the form of the view-graphs. The following subject areas are covered: the MIT program, its goals, achievements, and roadblocks; quasi one-dimensional modeling; two-dimensional modeling - transport effects and Hall effect; microscopic instabilities in MPD flows and modified two stream instability; electrothermal stability theory; separation of onset and anode depletion; exit plane spectroscopic measurements; phenomena of onset as performance limiter; explanations of onset; geometry effects on onset; onset at full ionization and its consequences; relationship to anode depletion; summary on self-field MPD; applied field MPD - the logical growth path; the case for AF; the challenges of AF MPD; and recommendations.

Martinez-Sanchez, Manuel↗

Microwave spectroscopic observation of distinct electron solid phases in wide quantum wells

In high magnetic fields, two-dimensional electron systems can form a number of phases in which interelectron repulsion plays the central role, since the kinetic energy is frozen out by Landau quantization. These phases include the well-known liquids of the fractional quantum Hall effect, as well as solid phases with broken spatial symmetry and crystalline order. Solids can occur at the low Landau-filling termination of the fractional quantum Hall effect series but also within integer quantum Hall effects. Here we present microwave spectroscopy studies of wide quantum wells that clearly reveal two distinct solid phases, hidden within what in d.c. transport would be the zero diagonal conductivity of an integer quantum-Hall-effect state. Explanation of these solids is not possible with the simple picture of a Wigner solid of ordinary (quasi) electrons or holes.

42 ENGINEERING↗

Spin Seebeck devices using local on-chip heating

A micro-patterned spin Seebeck device is fabricated using an on-chip heater. Current is driven through a Au heater layer electrically isolated from a bilayer consisting of Fe{sub 3}O{sub 4} (insulating ferrimagnet) and a spin detector layer. It is shown that through this method it is possible to measure the longitudinal spin Seebeck effect (SSE) for small area magnetic devices, equivalent to traditional macroscopic SSE experiments. Using a lock-in detection technique, it is possible to more sensitively characterize both the SSE and the anomalous Nernst effect (ANE), as well as the inverse spin Hall effect in various spin detector materials. By using the spin detector layer as a thermometer, we can obtain a value for the temperature gradient across the device. These results are well matched to values obtained through electromagnetic/thermal modeling of the device structure and with large area spin Seebeck measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temporal Evolution of Auto-Oscillations in an Yttrium-Iron-Garnet/Platinum Microdisk Driven by Pulsed Spin Hall Effect-Induced Spin-Transfer Torque

The temporal evolution of pulsed spin Hall effect-spin transfer torque (SHE-STT) driven auto-oscillations in a yttrium iron garnet (YIG)-platinum (Pt) microdisk is studied experimentally using time-resolved Brillouin light scattering spectroscopy. The frequency of the auto-oscillations is different in the center when compared to the edge of the disk and is related to the simultaneous STT excitation of a bullet and a non-localized spin-wave mode. Furthermore, the magnetization precession intensity saturates on a time scale of 20 ns or longer, depending on the current density. For this reason, our findings suggest that a proper ratio between the current and the pulse duration is of crucial importance for future STT-based devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonvolatile random access memory

A nonvolatile magnetic random access memory can be achieved by an array of magnet-Hall effect (M-H) elements. The storage function is realized with a rectangular thin-film ferromagnetic material having an in-plane, uniaxial anisotropy and inplane bipolar remanent magnetization states. The thin-film magnetic element is magnetized by a local applied field, whose direction is used to form either a 0 or 1 state. The element remains in the 0 or 1 state until a switching field is applied to change its state. The stored information is detcted by a Hall-effect sensor which senses the fringing field from the magnetic storage element. The circuit design for addressing each cell includes transistor switches for providing a current of selected polarity to store a binary digit through a separate conductor overlying the magnetic element of the cell. To read out a stored binary digit, transistor switches are employed to provide a current through a row of Hall-effect sensors connected in series and enabling a differential voltage amplifier connected to all Hall-effect sensors of a column in series. To avoid read-out voltage errors due to shunt currents through resistive loads of the Hall-effect sensors of other cells in the same column, at least one transistor switch is provided between every pair of adjacent cells in every row which are not turned on except in the row of the selected cell.

Wu, Jiin-Chuan↗

Manipulating topological Hall-like signatures by interface engineering in epitaxial ruthenate/manganite heterostructures

Topologically protected non-trivial spin textures (e.g. skyrmions) give rise to a novel phenomenon called the topological Hall effect (THE) and have promising implications in future energy-efficient nanoelectronic and spintronic devices. Here, we have studied the Hall effect in SrRuO 3 /La 0.42 Ca 0.58 MnO 3 (SRO/LCMO) bilayers. Our investigation suggests that pure SRO has hard and soft magnetic characteristics but the anomalous Hall effect (AHE) in SRO is governed by the high coercivity phase. Here, we have shown that the proximity effect of a soft magnetic LCMO on SRO plays a critical role in interfacial magnetic coupling and transport properties in SRO. Upon reducing the SRO thickness in the bilayer, the proximity effect becomes the dominant feature, enhancing the magnitude and temperature range of THE-like signatures. The THE-like features in bilayers can be explained by a diffusive Berry phase transition model in the presence of an emergent magnetic state due to interface coupling. This work provides an alternative understanding of THE-like signatures and their manipulation in SRO-based heterostructures, bilayers and superlattices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, magnetic, and transport properties of sputtered hexagonal MnNiGa thin films

We report on a systematical study of the structure, magnetism, and magnetotransport behavior of the hexagonal MnNiGa films deposited on thermally oxidized Si (001) substrates by magnetron sputtering. X-ray diffractions reveal that all the films deposited at different temperatures crystallized in hexagonal Ni{sub 2}In-type structure (space group P6{sub 3}/mmc). Scanning electron microscopy observations show that the surface morphology of the films varies with deposition temperature, and energy dispersive spectroscopy analysis shows compositions of the films remain nearly unchanged, independent of the deposition temperature. Magnetic measurements indicate that all films are ferromagnetic and exhibit a magnetic anisotropy behavior. The magnetoresistance (MR) exhibits a negative temperature- and field-dependent behavior. The possible origin of the negative MR is discussed. Furthermore, we found that the Hall effect is dominated by an anomalous Hall effect (AHE) only due to skew scattering independent of the deposition temperature of films. Moreover, the anomalous Hall resistivity presents a non-monotonously temperature-dependent behavior.

36 MATERIALS SCIENCE↗

Disorder, interactions, and their interplay in novel narrow-gap Dirac materials and Weyl semimetals

Progress of the modern day condensed matter physics is to a large extent driven by the synthesis of new materials, advances in their experimental characterization and theoretical description. Recent discoveries of novel gapless Weyl semimetals, such as NaBi,CdAs, and BiTe-based films, in which magnetic dopants essentially suppress the gap, have added to the family of graphene and topological insulators actively investigated over the past decade. With the field of novel semimetals rapidly maturing, its focus necessarily shifts from demonstrations of the feasibility of such materials to their quantitative characterization. While the transport and optical properties of graphene and topological insulators are well captured within the picture of free non-interacting electrons, gapless 3D Weyl semimetals and narrow-gap 2D semiconductors with Dirac spectrum are known to be extremely susceptible to disorder and electron-electron interactions. This susceptibility obscures the manifestations of nontrivial band structure -- like quantum anomalous Hall effect -- of the new topological materials. Among particular projects to be addressed are: 1) optical conductivity of 3D gapless Dirac fermions in the presence of smooth disorder, 2) interplay of disorder and Coulomb interactions in the spectral properties of such fermions, 3) formation and structure of the impurity band with Coulomb supercritical clusters, 4) Coulomb interaction-driven renormalization of the electron spectrum and of the transport response in the presence of strong magnetic field, 5) instanton approach to the disorder-induced fluctuation states in zero-gap 3D materials, and 6) the role of disorder in quantum anomalous Hall effect. The proposal relies upon the investigators' previous broad expertise in interacting and disordered electron systems. The methods to be employed include perturbative diagrammatic technique, non-perturbative instanton and self-consistent approximations, hydrodynamics of electron liquid. Both analytical as well as numerical approaches are to be employed. The anticipated broader outcome of the proposal includes gaining an in-depth understanding of the interplay of the disorder and interactions under the conditions when this interplay has the most dramatic impact on observables. Traditionally, interaction effects are among the most challenging and interesting problems of condensed matter physics. Similarly, disordered systems typically present very difficult but extremely rich problems in the description of various materials. Importantly, understanding the spectral and transport properties of such materials not only presents the fundamental objective, but is also of particular interest for many applications, such as computation, memory, optics, plasmonics. In particular realization of the quantum anomalous Hall effect may lead to the development of low-power-consumption electronics. Indeed, a major constraint for practical use of the quantum Hall effect is limited by the requirement of the quantizing magnetic field. At the same time, the quantum anomalous Hall effect samples exhibit non-dissipative edge quantum transport in a zero magnetic field.

36 MATERIALS SCIENCE↗

Effect of band filling on anomalous Hall conductivity and magneto-crystalline anisotropy in NiFe epitaxial thin films

The anomalous Hall effect (AHE) and magneto-crystalline anisotropy (MCA) are investigated in epitaxial Ni{sub x}Fe{sub 1−x} thin films grown on MgO (001) substrates. The scattering independent term b of anomalous Hall conductivity shows obvious correlation with cubic magneto-crystalline anisotropy K{sub 1}. When nickel content x decreasing, both b and K{sub 1} vary continuously from negative to positive, changing sign at about x = 0.85. Ab initio calculations indicate Ni{sub x}Fe{sub 1−x} has more abundant band structures than pure Ni due to the tuning of valence electrons (band fillings), resulting in the increased b and K{sub 1}. This remarkable correlation between b and K{sub 1} can be attributed to the effect of band filling near the Fermi surface.

36 MATERIALS SCIENCE↗

Development of a High-Propellant Throughput Small Spacecraft Electric Propulsion System to Enable Lower Cost NASA Science Missions

This paper describes recent progress at the NASA Glenn Research Center (GRC) in the development and demonstration of an integrated high-propellant throughput small spacecraft electric propulsion (HT-SSEP) system based on a Hall-effect thruster. A center-mounted cathode and an innovative magnetic circuit topology were implemented in the design of the Hall-effect thruster to achieve high-propellant throughput, high performance, and efficient packaging. To minimize technical risk, the HT-SSEP development approach sought to limit design features and materials to those with a clear path-to-flight. A propellant throughput capability of greater than 100 kg at a minimum thruster efficiency of 50% was targeted. The proof-of-concept NASA-H64M laboratory model (LM) thruster was designed, fabricated, and tested at GRC in fiscal year 2018. The thruster development leveraged heritage Hall-effect thruster design and manufacturing processes wherever appropriate. Recent NASA advances in Hall-effect thruster technology were also leveraged. A scalable discharge power supply (DPS) capable of powering the H64M-LM was developed, then demonstrated as part of an integrated system test. The DPS uses commercial off-the-shelf components with spaceflight equivalents. A keeper supply with DC ignitor was breadboarded, then demonstrated with a laboratory cathode. Finally, feed system trade studies were performed to ascertain what feed system architecture might be appropriate for an HT-SSEP system. This paper details the motivations for the project, the development approach, the chosen sub-system architectures, design considerations, and test results.

Benavides, Gabriel F.↗

Development of a High-Propellant Throughput Small Spacecraft Electric Propulsion System to Enable Lower Cost NASA Science Missions

This paper describes recent progress at the NASA Glenn Research Center (GRC) in the development and demonstration of an integrated high-propellant throughput small spacecraft electric propulsion (HT-SSEP) system based on a Hall-effect thruster. A center-mounted cathode and an innovative magnetic circuit topology were implemented in the design of the Hall-effect thruster to achieve high-propellant throughput, high performance, and efficient packaging. To minimize technical risk, the HT-SSEP development approach sought to limit design features and materials to those with a clear path-to-flight. A propellant throughput capability of greater than 100 kg at a minimum thruster efficiency of 50% was targeted. The proof-of-concept NASA-H64M laboratory model (LM) thruster was designed, fabricated, and tested at GRC in fiscal year 2018. The thruster development leveraged heritage Hall-effect thruster design and manufacturing processes wherever appropriate. Recent NASA advances in Hall-effect thruster technology were also leveraged. A scalable discharge power supply (DPS) capable of powering the H64M-LM was developed, then demonstrated as part of an integrated system test. The DPS uses commercial off-the-shelf components with spaceflight equivalents. A keeper supply with DC ignitor was breadboarded, then demonstrated with a laboratory cathode. Finally, feed system trade studies were performed to ascertain what feed system architecture might be appropriate for an HT-SSEP system. This paper details the motivations for the project, the development approach, the chosen sub-system architectures, design considerations, and test results.

Benavides, Gabriel F.↗

Development of a High-Propellant Throughput Small Spacecraft Electric Propulsion System (HT-SSEP) to Enable Lower Cost NASA Science Missions

Discusses progress at the NASA Glenn Research Center (GRC) in the development and demonstration of an integrated high-propellant throughput small spacecraft electric propulsion (HT-SSEP) system based on a Hall-effect thruster. A center-mounted cathode and an innovative magnetic circuit topology were implemented in the design of the Hall-effect thruster to achieve high-propellant throughput, high performance, and efficient packaging. To minimize technical risk, the HT-SSEP development approach sought to limit design features and materials to those with a clear path-to-flight. A propellant throughput capability of greater than 100 kilograms at a minimum thruster efficiency of 50 percent was targeted. The proof-of-concept NASA-H64M laboratory model (LM) thruster was designed, fabricated, and tested at GRC in fiscal year 2018. The thruster development leveraged heritage Hall-effect thruster design and manufacturing processes wherever appropriate. Recent NASA advances in Hall-effect thruster technology were also leveraged. A scalable discharge power supply (DPS) capable of powering the H64M-LM was developed, then demonstrated as part of an integrated system test. The DPS uses commercial off-the-shelf components with spaceflight equivalents. A keeper supply with DC ignitor was breadboarded, then demonstrated with a laboratory cathode. Finally, feed system trade studies were performed to ascertain what feed system architecture might be appropriate for an HT-SSEP system. This paper details the motivations for the project, the development approach, the chosen sub-system architectures, design considerations, and test results.

Benavides, Gabriel↗

THz-range Faraday rotation in the Weyl semimetal candidate Co 2 TiGe

The Co 2 family of ferromagnetic Heusler alloys has attracted interest due to their fully spin-polarized nature, making them ideal for applications in spintronic devices. More recently, the existence of room temperature time-reversal-breaking Weyl nodes near the Fermi level was predicted and confirmed in these systems. As a result of the presence of these Weyl nodes, these systems possess a non-zero momentum space Berry curvature that can dramatically influence transport properties such as the anomalous Hall effect. One of these candidate compounds is Co 2 TiGe. Recently, high-quality molecular beam epitaxy-grown thin films of Co 2 TiGe have become available. In this work, we present a THz-range measurement of MBE-grown Co 2 TiGe films. We measure the THz-range Faraday rotation, which can be understood as a measure of the anomalous Hall effect. We supplement this work with electronic band-structure calculations showing that the principal contribution to the anomalous Hall effect in this material stems from the Berry curvature of the material. Overall, our work shows that this class of Heusler materials shows promise for Weyl semimetal based spintronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding and control of bipolar self-doping in copper nitride

Semiconductor materials that can be doped both n-type and p-type are desirable for diode-based applications and transistor technology. Copper nitride (Cu{sub 3}N) is a metastable semiconductor with a solar-relevant bandgap that has been reported to exhibit bipolar doping behavior. However, deeper understanding and better control of the mechanism behind this behavior in Cu{sub 3}N is currently lacking in the literature. In this work, we use combinatorial growth with a temperature gradient to demonstrate both conduction types of phase-pure, sputter-deposited Cu{sub 3}N thin films. Room temperature Hall effect and Seebeck effect measurements show n-type Cu{sub 3}N with 10{sup 17} electrons/cm{sup 3} for low growth temperature (≈35 °C) and p-type with 10{sup 15} holes/cm{sup 3}–10{sup 16} holes/cm{sup 3} for elevated growth temperatures (50 °C–120 °C). Mobility for both types of Cu{sub 3}N was ≈0.1 cm{sup 2}/Vs–1 cm{sup 2}/Vs. Additionally, temperature-dependent Hall effect measurements indicate that ionized defects are an important scattering mechanism in p-type films. By combining X-ray absorption spectroscopy and first-principles defect theory, we determined that V{sub Cu} defects form preferentially in p-type Cu{sub 3}N, while Cu{sub i} defects form preferentially in n-type Cu{sub 3}N, suggesting that Cu{sub 3}N is a compensated semiconductor with conductivity type resulting from a balance between donor and acceptor defects. Based on these theoretical and experimental results, we propose a kinetic defect formation mechanism for bipolar doping in Cu{sub 3}N that is also supported by positron annihilation experiments. Overall, the results of this work highlight the importance of kinetic processes in the defect physics of metastable materials and provide a framework that can be applied when considering the properties of such materials in general.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charge and spin topological insulators

The topologically nontrivial states of matter-charge and spin topological insulators, which exhibit, respectively, properties of the integer quantum Hall effect and the quantum spin Hall effect-are discussed. The topological characteristics (invariant with respect to weak adiabatic changes in the Hamiltonian parameters) which lead to such states are considered. The model of a 2D hexagonal lattice having symmetries broken with respect to time reversal and spatial inversion which was proposed by Haldane and marked the beginning of unprecedented activity in the study of topologically nontrivial states is discussed. This model relates the microscopic nature of the symmetry breaking with respect to the time reversal to the occurrence of spontaneous orbital currents which circulate within a unit cell. Such currents become zero upon summation over the unit cell, but they may form spreading current states at the surface which are similar to the edge current states under the quantum Hall effect. The first model of spontaneous currents (exciton insulator model) is considered, and the possibility of implementing new topologically nontrivial states in this model is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A General Theorem Relating the Bulk Topological Number to Edge States in Two-dimensional Insulators

We prove a general theorem on the relation between the bulk topological quantum number and the edge states in two dimensional insulators. It is shown that whenever there is a topological order in bulk, characterized by a non-vanishing Chern number, even if it is defined for a non-conserved quantity such as spin in the case of the spin Hall effect, one can always infer the existence of gapless edge states under certain twisted boundary conditions that allow tunneling between edges. This relation is robust against disorder and interactions, and it provides a unified topological classification of both the quantum (charge) Hall effect and the quantum spin Hall effect. In addition, it reconciles the apparent conflict between the stability of bulk topological order and the instability of gapless edge states in systems with open boundaries (as known happening in the spin Hall case). The consequences of time reversal invariance for bulk topological order and edge state dynamics are further studied in the present framework.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗