Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEAD OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Performance of a zerovalent iron reactive barrier for the treatment of arsenic in groundwater: Part 2. Geochemical modeling and solid phase studies

Arsenic uptake processes were evaluated in a zerovalent iron reactive barrier installed at a lead smelting facility using geochemical modeling, solid-phase analysis, and X-ray absorption spectroscopy techniques. Aqueous speciation of arsenic is expected to play a key role in directing arsenic uptake processes. Geochemical modeling reveals contrasting pH-dependencies for As(III) and As(V) precipitation. At the moderately alkaline pH conditions typically encountered in zerovalent iron reactive barriers, As(III) is unlikely to precipitate as an oxide or a sulfide phase. Conversely, increasing pH is expected to drive precipitation of metal arsenates including ferrous arsenate. Bacterially mediated sulfate reduction plays an important role in field installations of granular iron. Neoformed iron sulfides provide surfaces for adsorption of oxyanion and thioarsenic species of As(III) and As(V) and are expected to provide enhanced arsenic removal capacity. X-ray absorption near edge structure (XANES) spectra indicate that arsenic is sequestered in the solid phase as both As(III) and As(V) in coordination environments with O and S. Arsenic removal in the PRB probably results from several pathways, including adsorption to iron oxide and iron sulfide surfaces, and possible precipitation of ferrous arsenate. Corrosion of granular iron appears to result in some As(III) oxidation to As(V) as the proportion of As(V) to As(III) in the solid phase is greater compared to influent groundwater. As(0) was not detected in the PRB materials. These results are broadly comparable to laboratory based studies of arsenic removal by zerovalent iron, but additional complexity is revealed in the field environment, which is largely due to the influence of subsurface microbiota.

54 ENVIRONMENTAL SCIENCES↗

Low temperature fluorination of Sr{sub 3}Fe{sub 2}O{sub 7-x} with polyvinylidine fluoride: An X-ray powder diffraction and Moessbauer spectroscopy study

Fluorination of the Ruddlesden Popper phase, Sr{sub 3}Fe{sub 2}O{sub 7-x} by heat treatment with polyvinylidine fluoride (PVDF) gives a range of novel oxide fluoride compounds. Fluorination with 1 mol equivalent PVDF leads to a filling of the normal Ruddlesden Popper structure anion sites and a material of composition Sr{sub 3}Fe{sub 2}O{sub 5+x}F{sub 2-x} (x Almost-Equal-To 0.28(4)) which contains both Fe{sup 4+} and Fe{sup 3+}. Increasing the amount of PVDF to 2 mol equivalent leads to an increase in anion content due to filling of half the interstitial sites within the structure, with iron being completely reduced to Fe{sup 3+} leading to a composition Sr{sub 3}Fe{sub 2}O{sub 4}F{sub 4}. An increase in the amount of PVDF to Almost-Equal-To 3 mol equivalent leads to a further increase in unit cell volume, attributed to complete filling of the interstitial sites and a composition Sr{sub 3}Fe{sub 2}O{sub 3}F{sub 6}. {sup 57}Fe Moessbauer spectra in the temperature range 10-300 K demonstrated the complexity of the magnetic interactions in each of the three phases which reflect different local compositions of oxygen and fluorine around the iron ions thus influencing the superexchange pathways. - Graphical abstract: Low temperature (375 Degree-Sign C) fluorination of Sr{sub 3}Fe{sub 2}O{sub 7-x} with poly(vinylidene fluoride) leads to the production of three new Ruddlesden Popper oxide fluorides with progressive filling of the anion sites within the structure. Highlights: Black-Right-Pointing-Pointer The fluorination of Sr{sub 3}Fe{sub 2}O{sub 7-x} using PVDF. Black-Right-Pointing-Pointer The control of the fluorine content with amount of PVDF used. Black-Right-Pointing-Pointer The synthesis of three new Fe based oxide fluorides. Black-Right-Pointing-Pointer The identification of the structures of these oxide fluorides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Near-infrared spectra and molar absorption coefficients of trivalent lanthanides dissolved in molten LiCl–KCl eutectic

Determining the concentration of the dissolved lanthanide species in LiCl–KCl eutectic salt is important to the development of pyrochemical reprocessing of used nuclear fuel. In this process, lanthanide fission products are found dissolved in the electrorefiner electrolyte in their trivalent oxidation state. The presence of dissolved trivalent lanthanides increases the liquidus temperature of the electrolyte mixture and can lead to the formation of insoluble oxide or oxychloride phases and must therefore be continuously monitored and controlled during the operation. Absorbance spectroscopy is a promising method for continuous measurement of the concentration of lanthanides and other elements dissolved in the electrolyte. The absorption of light by elements is linearly proportional to the concentration of the element for relatively dilute solutions according to the Beer-Lambert law. Although measurement of the absorption of ultraviolet and visible range light by lanthanides in LiCl–KCl eutectic molten salt have been explored previously, near infrared (NIR) absorption spectroscopy has received far less attention. It may, however, provide a better analytical signal when insoluble phases are present due to less Raleigh scattering compared to shorter wavelength radiation. Additionally, it may allow for concentration determination for certain elements using NIR absorption features where UV and visible range features are overlapping with features from other species. In this study, we report the UV–Vis–NIR spectra of the trivalent lanthanide chlorides of neodymium, samarium, and dysprosium in LiCl–KCl eutectic. Molar absorption coefficients are reported for analytically useful absorption maxima, with a focus on the molar absorption coefficients for NIR absorption maxima which have not been reported previously. Additionally, we observe a NIR-range absorption band of Nd3+ which was previously predicted but never experimentally observed. Here, we compare the calculated crystal field levels to the newly observed absorbance band and find them to be in good agreement with previous predictions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The generation of 4-hydroxynonenal, an electrophilic lipid peroxidation end product, in rabbit cornea organ cultures treated with UVB light and nitrogen mustard

The cornea is highly sensitive to oxidative stress, a process that can lead to lipid peroxidation. Ultraviolet light B (UVB) and nitrogen mustard (mechlorethamine) are corneal toxicants known to induce oxidative stress. Using a rabbit air-lifted corneal organ culture model, the oxidative stress responses to these toxicants in the corneal epithelium was characterized. Treatment of the cornea with UVB (0.5 J/cm{sup 2}) or nitrogen mustard (100 nmol) resulted in the generation of 4-hydroxynonenal (4-HNE), a reactive lipid peroxidation end product. This was associated with increased expression of the antioxidant, heme oxygenase-1 (HO-1). In human corneal epithelial cells in culture, addition of 4-HNE or 9-nitrooleic acid, a reactive nitrolipid formed during nitrosative stress, caused a time-dependent induction of HO-1 mRNA and protein; maximal responses were evident after 10 h with 30 μM 4-HNE or 6 h with 10 μM 9-nitrooleic acid. 4-HNE and 9-nitrooleic acid were also found to activate Erk1/2, JNK and p38 MAP kinases, as well as phosphoinositide-3-kinase (PI3)/Akt. Inhibition of p38 blocked 4-HNE- and 9-nitrooleic acid-induced HO-1 expression. Inhibition of Erk1/2, and to a lesser extent, JNK and PI3K/Akt, suppressed only 4-HNE-induced HO-1, while inhibition of JNK and PI3K/Akt, but not Erk1/2, partly reduced 9-nitrooleic acid-induced HO-1. These data indicate that the actions of 4-HNE and 9-nitrooleic acid on corneal epithelial cells are distinct. The sensitivity of corneal epithelial cells to oxidative stress may be an important mechanism mediating tissue injury induced by UVB or nitrogen mustard. - Highlights: • UVB or nitrogen mustard causes rabbit corneal epithelial injury. • 4-Hydroxynonenal (4-HNE) was formed and heme oxygenase-1 (HO-1) was increased. • 4-HNE induced HO-1 mRNA and protein expression in human corneal epithelial cells. • The induction of HO-1 by 4-HNE was through MAP kinase activation.

60 APPLIED LIFE SCIENCES↗

Possible Dynamically Gated Conductance along Heme Wires in Bacterial Multiheme Cytochromes

The staggered cross decaheme configuration of electron transfer co-factors in the outer-membrane cytochrome MtrF may serve as a prototype for conformationally-gated multi-heme electron transport. Derived from the bacterium Shewanella oneidensis, the staggered cross configuration reveals intersecting c-type octaheme and tetraheme “wires” containing thermodynamic “hills” and “valleys”, suggesting that the protein structure may include a dynamical mechanism for conductance and pathway switching depending on enzymatic functional need. Recent molecular simulations have established the pair-wise electronic couplings, redox potentials, and reorganization energies to predict the maximum conductance along the various heme wire pathways by sequential hopping of a single electron (PNAS (2014) 11,611-616). Here, we expand this information with classical molecular and statistical mechanics calculations of large-amplitude protein dynamics in MtrF, to address its potential to modulate pathway conductance, including assessment of the effect of the total charge state. Explicit solvent molecular dynamics simulations of fully oxidized and fully reduced MtrF employing ten independent 50-ns simulations at 300 K and 1 atm showed that reduced MtrF is more expanded and explores more conformational space than oxidized MtrF, and that heme reduction leads to increased heme solvent exposure. The slowest mode of collective decaheme motion is 90% similar between the oxidized and reduced states, and consists primarily of inter-heme separation with minor rotational contributions. The frequency of this motion is 1.7×107 s 1 for fully-oxidized and fully-reduced MtrF, respectively, slower than the downhill electron transfer rates between stacked heme pairs at the octaheme termini and faster than the electron transfer rates between parallel hemes in the tetraheme chain. This implies that MtrF uses slow conformational fluctuations to modulate electron flow along the octaheme pathway, apparently for the purpose of increasing the residence time of electrons on lowest potential hemes 4 and 9. This apparent gating mechanism should increase the success rate of electron transfer from MtrF to low potential environmental acceptors via these two solvent-exposed hemes.

c-type cytochromes, MtrF, Shewanella oneidensis, h↗

Influence of hydride precipitation on the corrosion kinetics of Zircaloy-4: effect of the nano-structure and grain boundary properties of the zirconium oxide layer on oxygen diffusion flux - 2016-0073

Hydride precipitation at the oxide-metal interface is frequently proposed as causing the corrosion acceleration of Zircaloy-4 at high burnup in pressurized water reactors (PWRs). In order to identify the local mechanisms possibly involved, we studied the nano-structure of oxides formed on massive zirconium hydrides and reference Zircaloy-4 with an innovative grain mapping technique with the use of transmission electron microscopy (TEM). In autoclave PWR-conditions, the presence of a precipitated hydride phase, previously formed by a cathodic charging technique at the surface of Zircaloy-4, clearly increased the corrosion rate, and a higher oxygen diffusion flux along oxide grain boundaries is observed compared with the reference Zircaloy-4. The texture, grain size, and adjacent grain misorientation in the oxide layer were studied in detail along the direction of the oxide growth using an automated crystal orientation mapping technique associated with TEM for both pre-hydrided and reference Zircaloy-4 samples. The texture in the growth direction is similar on pre-hydrided and reference samples, but the grain-to-grain mis-orientations showed differences. Indeed, on the pre-hydrided sample, the misorientation of 90 deg. C with respect to the [001] monoclinic axis is less probable than in the reference oxide, and more mis-orientations of 50-70 deg. C and 120-150 deg. C, corresponding to larger mismatches between neighboring grain boundaries, are observed. A smaller average diameter of the columnar monoclinic grains is also clearly revealed for the oxide grown on the pre-hydrided sample that leads to a larger number of diffusion paths for oxidizing species. These results are discussed and used for simulating oxygen diffusion flux through the polycrystalline microstructure of the oxide layer as a function of the grain size. (authors)

36 MATERIALS SCIENCE↗

Plume dynamics and gas-phase molecular formation in transient laser-produced uranium plasmas

The dynamics of expansion, thermodynamics, and chemical reactions in laser-produced plasmas is of general interest for all laser ablation applications. This study investigates the complex morphology and behavior of reactive species in nanosecond laser-produced uranium plasmas. Comparing plasma morphology in various inert and reactive ambient gases provides information about the role of gas-phase chemistry in plume hydrodynamics. Background gases including nitrogen and argon foster collisional interactions leading to more significant plume confinement and the increase in persistence of uranium species. On the other hand, environments containing reactive gases such as oxygen promote chemical reactions between the plasma and ambient species. By comparing the expansion dynamics of uranium plumes in nitrogen, air, and argon, we discover that chemical reactions modify the hydrodynamics of the plume at later times of its evolution in the air background. Furthermore, we observe that varying the concentration of oxygen in the fill gas promotes different reaction pathways that lead to the formation of uranium oxides. The reaction pathways from atoms to diatomic to polyatomic molecules strongly vary with ambient oxygen concentration. Lower oxygen concentrations enhance the formation of uranium monoxide from atomic uranium, whereas higher oxygen concentrations tend to depopulate both atomic uranium and uranium monoxide concentrations through the formation of more complex uranium oxides.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Catalytic decomposition of Ba(NO3)2 on Pt(111)

The decomposition of Ba(NO3)2 formed on BaO/Pt(111) (Pt(111) surface is partially covered by BaO) in the presence of CO was studied using temperature programmed desorption (TPD), infrared reflection absorption (IRA) and X-ray photoelectron (XP) spectroscopies. The exposure of BaO/Pt(111) to elevated NO2 pressure (1.0×10-4 Torr) at 450 K leads to the formation of Ba(NO3)2, chemisorbed O (OPt) and Pt-oxide-like domains. During TPD, the Ba(NO3)2 begins to thermally decompose near 490 K, releasing NO and NO2 with the maximum NOx desorption rate seen at 605 K. The OPt species formed following the exposure of BaO/Pt(111) to NO2 react with CO to release CO2 at 450 K. The consumption of OPt during CO oxidation initiates the migration of O from the Pt-oxide-like domains to the chemisorbed phase, where the CO oxidation reaction occurs. Therefore, the removal of OPt by CO leads to the reduction of oxidized Pt, and to the formation of metallic Pt(111) domains, where, subsequently, catalytic decomposition of Ba(NO3)2 can take place. The Pt-catalyzed decomposition of Ba(NO3)2 occurs readily at 450 K, a temperature much lower than the onset of the decomposition temperature of Ba(NO3)2 in the presence of oxidized Pt. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Injection of oxygen vacancies in the bulk lattice of layered cathodes

Surfaces, interfaces, and grain boundaries are, classically, known to be sinks at which defects generated within bulk lattice will preferentially migrate to and get annihilated, therefore rejuvenating a crystalline lattice to restore the intended functionalities.1, 2, 3 Here we report an inverse case by which the defects generated at the particle surface are continuously pumped into the bulk lattice and consequentially compromising the intended functionalities. We discovered that during the operation of a rechargeable battery, oxygen vacancies generated at cathode particle surfaces migrate toward inside of a perfect lattice in lithium-rich layered cathodes, featuring electrochemical driven surface vacancy creation, injection and condensation phenomenon and revealing an unrecognized surface process induced bulk lattice degradation featured with void formation and lattice reorganization. This process is associated with a high-cutoff voltage at which the anionic redox is activated. Coupling with calculations, we substantiate that triggering of anionic redox leads to sharply lowering of both formation energy of oxygen vacancy and migration barrier of oxidized oxide ions, therefore enabling migration of oxygen vacancy via oxidized oxide ion and leading to the injection of oxygen vacancy generated at the particle surface into the bulk lattice. This work unveils unpredicted behavior of oxidized oxide ion, leading to essential insight for designing of high capacity cathode for better batteries through coupled cationic and anionic redox dynamics in layered cathodes. In a broad term, this work provides insight on the intimate coupling between interfacial process and bulk lattice behavior for governing electrode functionality.

Yan, Pengfei↗

AIR INGRESS ANALYSIS: PART 2 – COMPUTATIONAL FLUID DYNAMIC MODELS

The Idaho National Laboratory (INL), under the auspices of the U.S. Department of Energy, is performing research and development that focuses on key phenomena important during potential scenarios that may occur in very high temperature reactors (VHTRs). Phenomena Identification and Ranking Studies to date have ranked an air ingress event, following on the heels of a VHTR depressurization, as important with regard to core safety. Consequently, the development of advanced air ingress-related models and verification and validation data are a very high priority. Following a loss of coolant and system depressurization incident, air will enter the core of the High Temperature Gas Cooled Reactor through the break, possibly causing oxidation of the in-the core and reflector graphite structure. Simple core and plant models indicate that, under certain circumstances, the oxidation may proceed at an elevated rate with additional heat generated from the oxidation reaction itself. Under postulated conditions of fluid flow and temperature, excessive degradation of the lower plenum graphite can lead to a loss of structural support. Excessive oxidation of core graphite can also lead to the release of fission products into the confinement, which could be detrimental to a reactor safety. Computational fluid dynamic model developed in this study will improve our understanding of this phenomenon. This paper presents two-dimensional and three-dimensional CFD results for the quantitative assessment of the air ingress phenomena. A portion of results of the density-driven stratified flow in the inlet pipe will be compared with results of the experimental results.

99 GENERAL AND MISCELLANEOUS↗

AIR INGRESS ANALYSIS: COMPUTATIONAL FLUID DYNAMIC MODELS

The Idaho National Laboratory (INL), under the auspices of the U.S. Department of Energy, is performing research and development that focuses on key phenomena important during potential scenarios that may occur in very high temperature reactors (VHTRs). Phenomena Identification and Ranking Studies to date have ranked an air ingress event, following on the heels of a VHTR depressurization, as important with regard to core safety. Consequently, the development of advanced air ingress-related models and verification and validation data are a very high priority. Following a loss of coolant and system depressurization incident, air will enter the core of the High Temperature Gas Cooled Reactor through the break, possibly causing oxidation of the in-the core and reflector graphite structure. Simple core and plant models indicate that, under certain circumstances, the oxidation may proceed at an elevated rate with additional heat generated from the oxidation reaction itself. Under postulated conditions of fluid flow and temperature, excessive degradation of the lower plenum graphite can lead to a loss of structural support. Excessive oxidation of core graphite can also lead to the release of fission products into the confinement, which could be detrimental to a reactor safety. Computational fluid dynamic model developed in this study will improve our understanding of this phenomenon. This paper presents two-dimensional and three-dimensional CFD results for the quantitative assessment of the air ingress phenomena. A portion of results of the density-driven stratified flow in the inlet pipe will be compared with results of the experimental results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Quantifying the Interfacial Strength of Oxide Scale and SS 441 Substrate Used in SOFC

Under a typical SOFC working environment, oxide scale will grow on the metallic interconnects in oxidant environment. The growth of the oxide scale induces the growth stresses in the oxide scale and on the scale/substrate interface combined with the thermal stresses induced by thermal expansion coefficient mismatch between the oxide scale and the substrate, which may lead to scale delamination/buckling and eventual spallation during stack cooling, even leading to serious cell performance degradation. Therefore, the interfacial adhesion strength between the oxide scale and substrate is crucial to the reliability and durability of the metallic interconnect in SOFC operating environments. As a powerful contender of ferritic interconnects used in SOFC, its interfacial strength between the oxide scale and SS 441 substrate is very important for its application. In this paper, we applied an integrated experimental/analytical methodology to quantify the interfacial adhesion strength between oxide scale and metallic interconnect. The predicted interfacial strength is discussed in detailed

indentation test↗

Role of surface hydroxyl groups in promoting room temperature CO sensing by Pd-modified nanocrystalline SnO{sub 2}

SnO{sub 2}/Pd nanocomposites were synthesized via sol-gel method followed by variable processing procedures. The materials are sensitive to CO gas in the concentration range 2-100 ppm at room operating temperature. It was shown that modification of nanocrystalline tin dioxide by Pd changes the temperature dependence of sensor response, decreasing the temperature of maximal signal. To understand the mechanism of room temperature CO sensitivity, a number of SnO{sub 2}/Pd materials were characterized by XRD, TEM, BET, XPS and TPR techniques. From the results of FTIR, impedance and sensing measurements under variable ambient conditions it was concluded that improvement in CO sensitivity for Pd-modified SnO{sub 2} is due to alteration of CO oxidation pathway. The reaction of CO with surface OH-groups at room temperature was proposed, the latter being more reactive than oxygen species due to the possible chain character of the reactions. It was proposed that Pd additive may initiate chain processes at room temperature. - Graphical abstract: Nanocrystalline SnO{sub 2} modified by PdO/Pd clusters exhibit high CO sensitivity at room temperature. An extensive study revealed surface OH-groups participation in CO oxidation on SnO{sub 2} leading to enhanced sensitivity at low operating temperature (25-150 {sup o}C). PdO/Pd clusters supposedly initiate a chain of CO reactions with surface hydroxyls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Experimental Investigation of Uranium and Iron Condensation from High-Temperature Plasma Conditions

We used a plasma flow reactor (PFR) to generate synthetic fallout nanoparticles from vapor-phase condensation of two different input concentrations of uranium and iron analytes (U/Fe = 1:1 and 1:2). Synthetic fallout from complex chemical matrices (e.g., mixtures of U and Fe) has not been generated in this setup before and allows for the observation of relative condensation and fractionation of nuclear debris. Experiments were conducted under two different temperature histories with variations in particle flow patterns along the PFR. Transmission electron microscopy (TEM) observation and analysis of the nanoparticles revealed variations in speciation of uranium oxides (UO 2 and α-UO 3 ) depending on the competition between flow mixing and oxygen sequestration by iron. A ternary metal oxide, UFeO 4 , was observed in addition to iron oxides (e.g., FeO and Fe 3 O 4 ), which suggests that fallout models should account for chemical speciation of ternary metal oxides (i.e., UFeO 4 ) and their relative condensation behaviors in addition to those of singular metal oxides (e.g., FeO and UO 2 ). X-ray Energy Dispersive Spectroscopy (EDS) elemental maps showed that some particles had Fe-rich cores surrounded by U-rich regions. This suggests that either condensed U oxides coagulate onto molten Fe oxides or that the increase in iron analyte concentration might drive the system toward a higher degree of supersaturation, leading to earlier formation of iron oxide particles and providing an energetically favored pathway for nucleation of uranium oxides around iron oxide particles.

and nuclear chemistry↗

Nanostructure-enhanced Phase Change Materials (NePCM) and HRD

Development and characterization of high aspect-ratio nanostructures tailored for dramatic improvements of thermal conductivity of phase change materials is proposed. This DOE renewal project builds upon a proven research record on development of a number of stable and functionality-proven colloids of metal oxide and metallic nanoparticles (avg. diameters less than 10 nm). These efforts followed original conceptualization and synergistic activities on promoting nanostructure-enhanced phase change materials (NePCM) and their utilization for thermal energy storage, waste heat recovery, thermal comfort, etc. Given this background, availability of promising preliminary results for the proposed target materials and formation of a new team of researchers, the investigators will focus on development of nanoadditives of metallic nanorods, functionalized carbon nanotubes, Graphene, graphite nanoplatelets, nanocomposites combining graphene with metal/metal oxide nanostructures and self-assembling carbon nanofiber-based nanomaterials. Specifically, the chemical synthesis group will identify procedures leading to nanorods of copper, copper oxide, silver and graphitic carbon exhibiting long-term stability against precipitation when dispersed in hydrocarbon solvents suitable for PCM applications. Important goals are to achieve nanorods with dimensions, including aspect ratio, that induce significant enhancements in thermal conductivity and also to control instabilities against rod precipitation during solvent freezing and melting. Another group will focus on developing complex nanoarchitectured nanocomposites through utilizing heterostructures that combine graphene with metal or metal oxide nanostructures. These heterostructures will be mixed with paraffin, fatty acids, or stearyl alcohol to realize novel NePCM. Fundamental studies will be performed by conducting materials and thermal characterization methods and structure-processing-properties relationships will be derived. In addition, growth mechanisms for the proposed heterostructures will be evaluated. Another research team will undertake a variety of approaches to functionalize the surfaces of nanostructured carbon-based materials, i.e. carbon nanotubes, Graphene and graphite nanoplatelets. The proposed techniques include both surfactant- and polymer-assisted dispersion of carbon nanotubes, Graphene and graphite nanoplatelets, in addition to microwave-initiated carbon nanotube growth to produce 3-D nanocarbon fillers for NePCM. Functionalized and pristine carbon nanotubes will also be subjected to a strong magnetic field to explore the effect of controlled alignment on the improved thermal conductivity. Microwave-initiated nanotube growth on the surfaces of the voids of graphite foam will be attempted to extend the previous work on thermal conductivity improvement of PCM that are impregnated into porous highly-conductive structures. Refinements of continuum modeling of colloids and most importantly, molecular dynamics-based mechanistic studies for carbon nanotubes and Graphene-based multi-component systems will be pursued. Finally, self-assembling carbon nanofiber-based NePCM will be investigated by another group. A highly-conductive carbon nanofiber network, which is created by a self-assembling approach, will host the PCM and enhance the thermal conductivity by several folds. Furthermore, the inert and relatively stable carbon nanofiber will be further utilized for creating low-mid range temperature NePCM and high-temperature NePCM by filling the porous space inside the self-assembling carbon nanofiber network with paraffin-based or salt-based PCM, respectively. Improved thermal energy charge/discharge performance and stable phase change temperature control features exhibited by this new generation of self-assembling carbon nanofiber-based NePCM will potentially impact many applications including solar energy storage systems.

25 ENERGY STORAGE↗

The effects of heavy metals and their interactions with polycyclic aromatic hydrocarbons on the oxidative stress among coke-oven workers

Heavy metals and polycyclic aromatic hydrocarbons (PAHs) are predominate toxic constituents of particulate air pollution that may be related to the increased risk of cardiopulmonary events. We aim to investigate the effects of the toxic heavy metals (arsenic, As; cadmium, Cd; chromium, Cr; nickel, Ni; and lead, Pb), and their interactions with PAHs on oxidative stress among coke-oven workers. A total of 1333 male workers were recruited in this study. We determined their urinary levels of As, Cd, Cr, Ni, Pb, twelve PAH metabolites, 8-hydroxydeoxyguanosine (8-OHdG), and 8-iso-prostaglandin-F2α (8-iso-PGF2α). Multivariate linear regression models were used to analyze the effects of these metals and their interactions with PAHs on 8-OHdG and 8-iso-PGF2α levels. It was found that only urinary As and Ni showed marginal or significant positive linear dose-dependent effects on 8-OHdG in this study population, especially among smokers (β=0.103, P=0.073 and β=0.110, P=0.002, respectively). After stratifying all participants by the quartiles of ΣOH-PAH, all five metals showed linear association with 8-OHdG in the highest quartile subgroup (Q4) of ΣOH-PAHs. However, these five urinary metals showed significantly consistent linear associations with 8-iso-PGF2α in all subjects and each stratum. Urinary ΣOH-PAHs can significant modify the effects of heavy metals on oxidative stress, while co-exposure to both high levels of ΣOH-PAHs and heavy metals render the workers with highest 8-OHdG and 8-iso-PGF2α (all P{sub interaction}≤0.005). This study showed evidence on the interaction effects of heavy metals and PAHs on increasing the oxidative stress, and these results warrant further investigation in more longitudinal studies. - Highlights: • Heavy metals and PAHs are predominate toxic constituents of particulate matters. • Urinary As and Ni showed linear dose-dependent effects on 8-OHdG and 8-iso-PGF2α. • PAHs significant interact with toxic metal in increasing 8-OHdG and 8-iso-PGF2α. • Co-exposure to high PAHs and toxic metals contribute to highest oxidative stress.

54 ENVIRONMENTAL SCIENCES↗

Synthesis, crystal structure and magnetic properties of Li{sub 2}InMo{sub 3}O{sub 8}: A novel reduced molybdenum oxide containing magnetic Mo{sub 3} clusters

Powder samples and single crystals of Li{sub 2}InMo{sub 3}O{sub 8} were obtained by solid state reaction. The structure was determined by single-crystal X-ray diffraction (771 independent reflections for 33 refinable, R1=0.0158 and wR2=0.0354). Li{sub 2}InMo{sub 3}O{sub 8} is isomorphous with Li{sub 2}SnMo{sub 3}O{sub 8} and crystallizes in the hexagonal space group P6{sub 3}mc with unit-cell parameters a=5.7931(2) Å, c=10.4681(4) Å and Z=2. The crystal structure consists of distorted hexagonal-close-packed oxygen layers with stacking sequence abac along [0 0 1] and that are held together by alternating lithium–indium and molybdenum layers. The Li{sup +} and In{sup 3+} ions occupy, respectively, tetrahedral and octahedral sites in the ratio 2:1. The Mo atoms occupy octahedral sites and form strongly bonded triangular clusters involving three MoO{sub 6} octahedra that are each shared along two edges, constituting a Mo{sub 3}O{sub 13} unit. The variations of the Mo–Mo and Mo–O bond lengths according to the number of electrons per Mo{sub 3} cluster are discussed. The trivalent oxidation state of the indium leads to one unpaired electron per Mo{sub 3} and thus gives rise to a paramagnetic spin behavior with an effective magnetic moment of 1.5 μ{sub B} per Mo{sub 3} cluster. The magnetic susceptibility vs. temperature curve also shows a maximum at 25 K arising probably from an antiferromagnetic ordering between the Mo{sub 3} clusters. - Graphical abstract: We present here the synthesis, the crystal structure, and the magnetic properties of the new quaternary compound Li{sub 2}InMo{sub 3}O{sub 8} containing magnetic Mo{sub 3}O{sub 13} units with one unpaired electron. - Highlights: • The new quaternary reduced molybdenum oxide containing Mo{sub 3} clusters, Li{sub 2}InMo{sub 3}O{sub 8}, was synthesized by solid state reaction. • Single-crystal X-ray study. • One unpaired electron per Mo{sub 3} cluster leading to a paramagnetic spin behavior with an effective magnetic moment of 1.5 μ{sub B} per Mo{sub 3} cluster. • Magnetic susceptibility measurements show a maximum at 25 K arising probably from an antiferromagnetic ordering between the Mo{sub 3} clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ and In-operando Cobalt Oxidation Studied by Atom Probe Tomography

Heterogeneous catalysis is one of the pillars of the chemical industry and the “green chemistry” concept. However, the sparse understanding of surface mechanisms at molecular scale impedes development of high-performance catalysts and requires development of new tools and methodologies. Cobalt is notably able to dissociate CO 2 into CO(g) and O 2 (g), allowing further conversion to higher value compounds such as long-chain hydrocarbons. Such application leads inevitably to Co surface oxidation. Finally, from its pure form (Co(0)) to oxidized ones (CoO and Co 3 O 4 ) the formation mechanism remains unclear as well as the surface structure evolution and its influence on the chemical reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗