Search NASA⌕ Search

SEARCH · Search NASA

Results for “Layered Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Synthesis and Polymorph Manipulation of FeSe 2 Monolayers

Polymorph engineering involves the manipulation of material properties through controlled structural modification and is a candidate technique for creating unique two-dimensional transition metal dichalcogenide (TMDC) nanodevices. Despite its promise, polymorph engineering of magnetic TMDC monolayers has not yet been demonstrated. Here we grow FeSe 2 monolayers via molecular beam epitaxy and find that they have great promise for magnetic polymorph engineering. Using scanning tunneling microscopy (STM) and spectroscopy (STS), we find that FeSe 2 monolayers predominantly display a 1T' structural polymorph at 5 K. Application of voltage pulses from an STM tip causes a local, reversible transition from the 1T' phase to the 1T phase. Density functional theory calculations suggest that this single-layer structural phase transition is accompanied by a magnetic transition from an antiferromagnetic to a ferromagnetic configuration. In conclusion, these results open new possibilities for creating functional magnetic devices with TMDC monolayers via polymorph engineering.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of vanadium pentoxide nanowires

Nanowires of V{sub 2}O{sub 5} were prepared via hydrothermal route using NH{sub 4}VO{sub 3} as precursor in the presence of sulfuric acid at 120°C for 24 h. This synthesis process is free of any templates and reducing agents. Thermal analysis showed a phase change at 350°C and the samples were annealed at 500°C. The XRD analysis showed the monoclinic phase for the as-prepared and orthorhombic phase of V{sub 2}O{sub 5} when annealed at 500°C. Characteristic Raman peaks also expressed the same structural features. Microstructure analysis by SEM showed the nanowire structure of V{sub 2}O{sub 5} with thickness in the range of 20–50 nm and length in micrometers. The possible mechanisms of formation of the nanowires were schematically explained based on the layered structure of V{sub 2}O{sub 5}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Five new Zn(II) and Cd(II) coordination polymers constructed by 3,5-bis-oxyacetate-benzoic acid: Syntheses, crystal structures, network topologies and luminescent properties

Five Zn(II) and Cd(II) coordination polymers, [Zn{sub 2}(BOABA)(bpp)(OH)]{center_dot}0.5H{sub 2}O (1), [Cd{sub 3}(BOABA){sub 2}(bpp){sub 2}(H{sub 2}O){sub 6}]{center_dot}2H{sub 2}O (2), [Cd{sub 3}(BOABA){sub 2}(2,2 Prime -bipy){sub 3}(H{sub 2}O){sub 4}]{center_dot}5.5H{sub 2}O (3), [CdNa(BOABA)(H{sub 2}O)]{sub 2}{center_dot}H{sub 2}O (4) and [Cd{sub 2}(BOABA)(bimb)Cl(H{sub 2}O){sub 2}]{center_dot}H{sub 2}O (5) (H{sub 3}BOABA=3,5-bis-oxyacetate-benzoic acid, bpp=1,3-bi(4-pyridyl)propane, 2,2 Prime -bipy=2,2 Prime -bipyridine, bimb=1,4-bis(imidazol-1 Prime -yl)butane), have been solvothermally synthesized and characterized by single-crystal X-ray diffraction, elemental analyses, IR spectra and TG analyses. 1 is an uninodal 4-connected 2D square grid network based on binuclear zinc clusters. 2 is 2D wavelike layer structure and further linked by hydrogen bonds into the final 3D (5,6,6)-connected topology network. 3 is 3-connected 2D topology network and the 2,2 Prime -bipy ligands decorate in two different types. 4 is a (4,8)-connected 2D topology network with heterocaryotic {l_brace}Cd{sub 2}Na{sub 2}{r_brace} clusters and BOABA{sup 3-} ligands. 5 can be rationalized as a (3,10)-connected 3D topology network with tetranuclear {l_brace}Cd{sub 4}Cl{sub 2}{r_brace} clusters and BOABA{sup 3-} ligands. Meanwhile, photoluminescence studies revealed that these five coordination polymers display strong fluorescent emission bands in the solid state at room temperature. - Graphical abstract: Five new d{sup 10} metal(II) coordination polymers based on H{sub 3}BOABA ligand were obtained and characterized. They display different topological structures and luminescent properties. Highlights: Black-Right-Pointing-Pointer Five d{sup 10} metal(II) polymers based on 3,5-bis-oxyacetate-benzoic acid were obtained. Black-Right-Pointing-Pointer The polymers were structurally characterized by single-crystal X-ray diffraction. Black-Right-Pointing-Pointer Polymers 1-5 display different topological structures. Black-Right-Pointing-Pointer They show strong fluorescent emission bands in the solid state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chirality-related interactions and a mirror symmetry violation in handed nano structures

Hindering of inversion transitions and a violation of mirror symmetry of the right- and left-handed configurations of diazabizyclooctane (dabco, N{sub 2}C{sub 6}H{sub 12}) enantiomers has been studied with low-temperature adiabatic calorimetry. The dabco molecules were sandwiched in a high-porous layered structure of a metal organic framework (MOF) compound. We show from the data of low-temperature adiabatic calorimetry and {sup 1}H NMR spin relaxation method that hindering of inversion transitions of dabco molecules cannot be associated with the influence of the intracrystalline self-consistent molecular field as a continuously monitoring environment within the quantum Zeno effect. In addition, lack of another manifestation of this effect associated with the collisional suppression of the inversion transitions in MOF samples impregnated by helium has been shown. These results lead to the conclusion that chiral polarization is related to the fundamental effect of parity nonconservation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Nano-crystalline Todorokite from Biogenic Mn Oxides

Todorokite, as one of three main Mn oxide phases present in oceanic Mn nodules and an active MnO{sub 6} octahedral molecular sieve (OMS), has garnered much interest; however, its formation pathway in natural systems is not fully understood. Todorokite is widely considered to form from layer structured Mn oxides with hexagonal symmetry, such as vernadite ({delta}-MnO{sub 2}), which are generally of biogenic origin. However, this geochemical process has not been documented in the environment or demonstrated in the laboratory, except for precursor phases with triclinic symmetry. Here we report on the formation of a nanoscale, todorokite-like phase from biogenic Mn oxides produced by the freshwater bacterium Pseudomonas putida strain GB-1. At long- and short-range structural scales biogenic Mn oxides were transformed to a todorokite-like phase at atmospheric pressure through refluxing. Topotactic transformation was observed during the transformation. Furthermore, the todorokite-like phases formed via refluxing had thin layers along the c* axis and a lack of c* periodicity, making the basal plane undetectable with X-ray diffraction reflection. The proposed pathway of the todorokite-like phase formation is proposed as: hexagonal biogenic Mn oxide {yields} 10-{angstrom} triclinic phyllomanganate {yields} todorokite. These observations provide evidence supporting the possible bio-related origin of natural todorokites and provide important clues for understanding the transformation of biogenic Mn oxides to other Mn oxides in the environment. Additionally this method may be a viable biosynthesis route for porous, nano-crystalline OMS materials for use in practical applications.

58 GEOSCIENCES↗

Néel-type skyrmion in WTe 2 /Fe 3 GeTe 2 van der Waals heterostructure

The promise of high-density and low-energy-consumption devices motivates the search for layered structures that stabilize chiral spin textures such as topologically protected skyrmions. At the same time, recently discovered long-range intrinsic magnetic orders in the two-dimensional van der Waals materials provide a new platform for the discovery of novel physics and effects. Here we demonstrate the Dzyaloshinskii–Moriya interaction and Néel-type skyrmions are induced at the WTe 2 /Fe 3 GeTe 2 interface. Transport measurements show the topological Hall effect in this heterostructure for temperatures below 100 K. Furthermore, Lorentz transmission electron microscopy is used to directly image Néel-type skyrmion lattice and the stripe-like magnetic domain structures as well. The interfacial coupling induced Dzyaloshinskii–Moriya interaction is estimated to have a large energy of 1.0 mJ m –2 . This work paves a path towards the skyrmionic devices based on van der Waals layered heterostructures.

42 ENGINEERING↗

Advanced Si solid phase crystallization for vertical channel in vertical NANDs

The advanced solid phase crystallization (SPC) method using the SiGe/Si bi-layer structure is proposed to obtain high-mobility poly-Si thin-film transistors in next generation vertical NAND (VNAND) devices. During the SPC process, the top SiGe thin film acts as a selective nucleation layer to induce surface nucleation and equiaxial microstructure. Subsequently, this SiGe thin film microstructure is propagated to the underlying Si thin film by epitaxy-like growth. The initial nucleation at the SiGe surface was clearly observed by in situ transmission electron microscopy (TEM) when heating up to 600 °C. The equiaxial microstructures of both SiGe nucleation and Si channel layers were shown in the crystallized bi-layer plan-view TEM measurements. Based on these experimental results, the large-grained and less-defective Si microstructure is expected to form near the channel region of each VNAND cell transistor, which may improve the electrical characteristics.

36 MATERIALS SCIENCE↗

Fabricating structured particles through rapid hardening and tailored collection methods

Fabrication of functional polymer-based particles by crosslinking UV-curable polymer drops in mid-air and collecting crosslinked particles in a solid container, a liquid suspension, or an air flow. The particles can contain different phases in the form or layered structures that contain one to multiple cores, or structures that are blended with dissolved or emulsified smaller domains. A curing system produces ultraviolet rays that are directed onto the particles in the jet stream from one side. A reflector positioned on other side of the jet stream reflects the ultraviolet rays back onto the particles in the jet stream.

Ye, Congwang↗

Fabricating structured particles through rapid hardening and tailored collection methods

Fabrication of functional polymer-based particles by crosslinking UV-curable polymer drops in mid-air and collecting crosslinked particles in a solid container, a liquid suspension, or an air flow. The particles can contain different phases in the form or layered structures that contain one to multiple cores, or structures that are blended with dissolved or emulsified smaller domains. A curing system produces ultraviolet rays that are directed onto the particles in the jet stream from one side. A reflector positioned on other side of the jet stream reflects the ultraviolet rays back onto the particles in the jet stream.

Ye, Congwang↗

Surface-modified Li[Li 0.2 Ni 0.17 Co 0.07 Mn0.56]O 2 nanoparticles with MgF 2 as cathode for Li-ion battery

Li-rich layered materials hold lots of promise as cathode for next-generation high performance Li-ion batteries. Here, surface-modified layer-structured Li[Li 0.2 Ni 0.17 Co 0.07 Mn 0.56 ]O 2 (Li-rich) nanoparticles are employed as cathode for Li storage and transport studies. Moreover, our results demonstrate that 1 wt.% MgF 2 -modified Li-rich electrode exhibits the best cycling capability, with capacity retention ratio of 86% after 50 cycles, much higher than that of pristine one (only 66%). In the meantime, the 1 wt.% MgF 2 surface modified Li-rich electrode shows superior rate performance and thermal abuse treatments as well. Subsequent investigation indicates that the coated MgF 2 layer can suppress the undesirable growth of solid electrolyte interphase (SEI) film and enhance the structure stability upon cycling. Finally, this coating technique provides the potentially rewarding avenue towards the development of high capacity Li-ion cathodes.

25 ENERGY STORAGE↗

Solution-Based, Template-Assisted Realization of Large-Scale Graphitic ZnO

With a honeycomb single-atomic-layer structure similar to those of graphene and hexagonal boron nitride (hBN), the graphitic phase of ZnO (gZnO) have been predicted to offer many advantages for engineering, including high-temperature stability in ambient conditions and great potential in heterostructure applications. However, there is little experimental data about this hexagonal phase due to the difficulty of synthesizing large-area gZnO for characterization and applications. In this work, we demonstrate a solution-based approach to realize gZnO nanoflakes with thicknesses down to a monolayer and sizes up to 20 mum. X-ray photoelectron spectroscopy, X-ray absorption near-edge spectroscopy, photoluminescence, atomic force microscopy, and electron microscopy characterizations are conducted on synthesized gZnO samples. Measurements show significant changes to the electronic band structure compared to its bulk phase, including an increase of the band gap to 4.8 eV. The gZnO nanosheets also exhibit excellent stability at temperatures as high as 800 °C in ambient environment. This wide band gap layered material provides us with a platform for harsh environment electronic devices, deep ultraviolet optical applications, and a practical alternative for hBN. As a result, our synthesis method may also be applied to achieve other types of 2D oxides.

36 MATERIALS SCIENCE↗

Synthesis, characterization and properties of yellow-light-emitting polyethers containing bis(styryl)anthracene units

Aromatic aliphatic polyethers containing bis(styryl)anthracene units in the main chain separated by flexible spacer of 11 (AND52) or 12 (AND53) methylene units, were synthesized and characterized aiming to be applied as emitting materials in polymer light emitting diode (PLED) devices. The polymers are soluble in common organic solvents and have average molecular weight of about 15kDa. Differentiations owing to an odd-even number of methylene units (χ=11 vs χ=12) are observed in their optical properties in solid state. Thin films as well as PLED devices were fabricated via conventional spin-coating process. Initially, various parameters have been investigated concerning the solubility of the polymers, the effect of film thickness on the electrical properties, and their thermal stability. The optical properties of the two polymers were investigated by NIR-Vis-far UV spectroscopic ellipsometry (SE). The accurate determination of the thickness and the optical constants (refractive index and dielectric function as a function of wavelength) were derived. These provide substantial insights into the final design of the optimum final multi-layer structure of the PLEDs, if we take into account that the external quantum efficiency (EQE) of electroluminescence (EL) strongly depends on the optical interference of the beams of emitted light that have been multiply reflected from the layer interfaces. The morphological characterization of the AND52 and AND53 polymeric thin films was carried out using atomic force microscopy (AFM), while current density-voltage (J-V) characteristics of the devices were studied by electrical measurements. The single PLED devices were switched on at relatively low operation voltages, showing the potential as backplanes for active matrix PLED applications. In this perspective, it can be assumed that further studies of the presented materials will enable the development of flexible PLEDs with the possibility to scale up their dimensions for bigger active area devices.

36 MATERIALS SCIENCE↗

Model independent x-ray standing wave analysis of periodic multilayer structures

We present a model independent approach for the analysis of X-ray fluorescence yield modulated by an X-ray standing wave (XSW), that allow a fast reconstruction of the atomic distribution function inside a sample without fitting procedure. The approach is based on the direct regularized solution of the system of linear equations that characterizes the fluorescence yield. The suggested technique was optimized for, but not limited to, the analysis of periodic layered structures where the XSW is formed under Bragg conditions. The developed approach was applied to the reconstruction of the atomic distribution function for LaN/BN multilayers with 50 periods of 43 Å thick layers. The object is especially difficult to analyze with traditional methods, as the estimated thickness of the interface region between the constituent materials is comparable to the individual layer thicknesses. However, using the suggested technique, it was possible to reconstruct width of the La atomic distribution showing that the La atoms stay localized within the LaN layers and interfaces and do not diffuse into the BN layer. The analysis of the reconstructed profiles showed that the positions of the center of the atomic distribution function can be estimated with an accuracy of 1 Å.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ X-ray studies of adlayer-induced crystal nucleation at the liquid-liquid interface

Crystal nucleation and growth at a liquid–liquid interface is studied on the atomic scale by in situ Å-resolution X-ray scattering methods for the case of liquid Hg and an electrochemical dilute electrolyte containing Pb 2+ , F - , and Br - ions. In the regime negative of the Pb amalgamation potential Φ rp = -0.70 V, no change is observed from the surface-layered structure of pure Hg. Upon potential-induced release of Pb 2+ from the Hg bulk at Graphic, the formation of an intriguing interface structure is observed, comprising a well-defined 7.6-Å–thick adlayer, decorated with structurally related 3D crystallites. Both are identified by their diffraction peaks as PbFBr, preferentially aligned with their Graphic axis along the interface normal. X-ray reflectivity shows the adlayer to consist of a stack of five ionic layers, forming a single-unit-cell–thick crystalline PbFBr precursor film, which acts as a template for the subsequent quasiepitaxial 3D crystal growth. This growth behavior is assigned to the combined action of electrostatic and short-range chemical interactions.

Elsen, Annika↗

Evolution of Oxyhalide Crystals under Electron Beam Irradiation: An in Situ Method To Understand the Origin of Structural Instability

The oxyhalides have attracted growing interest because of their excellent photocatalytic performance. However, their structural instability hampers further development toward practical applications, a major challenge of current concerns. It is appealing to figure out the origin of structural instability and guide the design of advanced oxyhalide crystals for efficient photocatalysis. In this study, the decomposition of BiOCl crystals, a typical oxyhalide, is triggered by electron beam irradiation and investigated in situ by transmission electron microscopy. The results indicate that the instability originates from the unique layered structure of BiOCl crystals; the interlayer van der Waals bonds are easily broken under electron beam irradiation via the assistance of hydroxyl groups. This facilitates the formation of O/Cl-deficient BiO 1–x Cl 1–y species, Bi metal nanoparticles, and nanobubbles (gaseous substance) that are confined between the adjacent layers. Surface reconstruction would be an effective way to stabilize the oxyhalide crystals.

36 MATERIALS SCIENCE↗

Topotaxial growth of α-Fe{sub 2}O{sub 3} nanowires on iron substrate in thermal annealing method

A detail cross-sectional transmission electron microscopy of as-grown α-Fe{sub 2}O{sub 3} nanowire sample, synthesized on iron substrate by thermal annealing method, was carried out to understand the mechanism of growth in this system. Iron undergoes sequential oxidation to form a layered structure of Fe/FeO/Fe{sub 3}O{sub 4}/α-Fe{sub 2}O{sub 3}. α-Fe{sub 2}O{sub 3} nanowires grow on to the top of α-Fe{sub 2}O{sub 3} layer. It was found that subsequent oxide layers grow topotaxially on the grains of iron, which results in a direct orientation relationship between the α-Fe{sub 2}O{sub 3} nanowire and the parent grain of iron. The results also showed that the grains of α-Fe{sub 2}O{sub 3} layer, which were uniquely oriented in [110] direction, undergo highly anisotropic growth to form the nanowire. This anisotropic growth occurs at a twin interface, given by (−11−1), in the α-Fe{sub 2}O{sub 3} layer. It was concluded that the growth at twin interface could be the main driving factor for such anisotropic growth. These observations are not only helpful in understanding the growth mechanism of α-Fe{sub 2}O{sub 3} nanowires, but it also demonstrates a way of patterning the nanowires by controlling the texture of iron substrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Studying Changes in the Microhardness of a Zirconium Surface Modified by Laser Processing

The results of an investigation of the process of laser-induced hardening of zirconium (E110 alloy) are reported. It has been established that the laser treatment in air results in the formation of a uniformly distributed microrelief characterized by the presence of microparticles with various configurations. Overlap of the laser beam trajectories leads to the formation of a layered structure. The composition of laser-modified surface depends on the regime of processing and mostly comprises a mixture of zirconium oxides and nitrides. In addition, the formation of diffuse transition zones between the bulk metal and modified surface layer is established. The dependence of the thickness of the hardened layer on the regime of pulsed laser action is determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thin Oxides as a Cu Diffusion Barrier for NIF Be Ablator Capsules

The NIF point design uses a five-layer capsule to modify the X-ray absorption in order to achieve optimized shock timing. A stepped copper dopant design defines the layer structure. The production of the capsule involves pyrolysis to remove the inner plastic mandrel. Copper atoms diffuse radially and azimuthally throughout the capsule during pyrolysis. This diffusion significantly diminishes the capsule performance during implosion. Thermal and coated oxide barrier layers employed between layers mitigate the diffusion of copper during the mandrel removal process. The copper atoms do not diffuse through this barrier during pyrolysis. A capsule fabrication method that produces a capsule with a thin oxide layer will be discussed.

42 ENGINEERING↗