Search NASA⌕ Search

SEARCH · Search NASA

Results for “Log data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Analyzing Wildland Fire Smoke Emissions Data Using Compositional Data Techniques

By conservation of mass, the mass of wildland fuel that is pyrolyzed and combusted must equal the mass of smoke emissions, residual char and ash. For a given set of conditions, these amounts are fixed. This places a constraint on smoke emissions data which violates statistical assumptions for many of the methods currently used to analyze these data such as linear regression, analysis of variance, and t-tests. These data are inherently multivariate and non-negative parts of a whole. This paper introduces the field of compositional data analysis to the emissions community and provides examples of appropriate statistical treatment of emissions data. It is shown that modified combustion efficiency should not be used as a predictor variable for other smoke emissions because it is not an independent variable. An alternative method based on compositional linear trends to estimate trace gas composition using CO and CO2 is presented. The data used in this paper resulted from projects the DOD/DOE/EPA Strategic 586 Environmental Research and Development Program projects RC-1648 and 1649. The senior 587 author appreciates the guidance and R scripts provided by Prof. Girty at San Diego State 588 University to estimate linear trends by perturbation. J. P.-A. was supported by the Spanish 589 Ministry of Science, Innovation and Universities under the project CODAMET (RTI2018-590 095518-B-C21, 2019-2021). The data used in this study have been previously published and are 591 available in the original publications. DRW conceived the initial manuscript (70 percent) and 592 performed the bulk of the data analysis. JPA provided statistical guidance and compositional data 593 expertise and contributed 20 percent of the manuscript. TJJ and HJ were extensively involved in 594 the study that provided the data. TJJ provide smoke emissions expertise and HJ provided 595 combustion expertise. The authors declare that they have no conflict of interest. The use of trade 596 or firm names in this publication is for reader information and does not imply endorsement by 597 the U.S. Department of Agriculture of any product or service.

simplex, compositional data analysis, balance, log↗

Shock initiation behavior of PBXN-9 determined by gas gun experiments

The shock to detonation transition was evaluated in the HMX based explosive PBXN-9 by a series of light-gas gun experiments. PBXN-9 consists of 92 wt% HMX, 2wt% Hycar 4054 & 6 wt% dioctyl adipate with a density of 1.75 g/cm{sup 3} and 0.8% voids. The experiments were designed to understand the specifics of wave evolution and the run distance to detonation as a function of input shock pressure. These experiments were conducted on gas guns in order to vary the input shock pressure accurately. The primary diagnostics were embedded magnetic gauges, which are based on Faraday's law of induction, and Photon Doppler Velocimetry (PDV). The run distance to detonation vs. shock pressure, or 'Pop plot,' was redefined as log(X*) = 2.14-1.82 log(P), which is substantially different than previous data. The Hugoniot was refined as U{sub s} = 2.32 + 2.21 U{sub p}. This data will be useful for the development of predictive models for the safety and performance of PBXN-9 along with providing increased understanding of HMX based explosives in varying formulations.

36 MATERIALS SCIENCE↗

An implantable instrument for studying the long-term flight biology of migratory birds

The design of an instrument deployed in a project studying the high altitude Himalayan migrations of bar-headed geese (Anser indicus) is described. The electronics of this archival datalogger measured 22 × 14 × 6.5 mm, weighed 3 g, was powered by a ½AA-sized battery weighing 10 g and housed in a transparent biocompatible tube sealed with titanium electrodes for electrocardiography (ECG). The combined weight of 32 g represented less than 2% of the typical bodyweight of the geese. The primary tasks of the instrument were to continuously record a digitised ECG signal for heart-rate determination and store 12-bit triaxial accelerations sampled at 100 Hz with 15% coverage over each 2 min period. Measurement of atmospheric pressure provided an indication of altitude and rate of ascent or descent during flight. Geomagnetic field readings allowed for latitude estimation. These parameters were logged twice per minute along with body temperature. Data were stored to a memory card of 8 GB capacity. Instruments were implanted in geese captured on Mongolian lakes during the breeding season when the birds are temporarily flightless due to moulting. The goal was to collect data over a ten month period, covering both southward and northward migrations. This imposed extreme constraints on the design's power consumption. Raw ECG can be post-processed to obtain heart-rate, allowing improved rejection of signal interference due to strenuous activity of locomotory muscles during flight. Accelerometry can be used to monitor wing-beat frequency and body kinematics, and since the geese continued to flap their wings continuously even during rather steep descents, act as a proxy for biomechanical power. The instrument enables detailed investigation of the challenges faced by the geese during these arduous migrations which typically involve flying at extreme altitudes through cold, low density air where oxygen availability is significantly reduced compared to sea level.

60 APPLIED LIFE SCIENCES↗

SHαDE: survey description and mass–kinematics scaling relations for dwarf galaxies

ABSTRACT The Study of H α from Dwarf Emissions (SHαDE) is a high spectral resolution (R = 13 500) H α integral field survey of 69 dwarf galaxies with stellar masses 106 < M⋆ < 109 M⊙. The survey used FLAMES on the ESO Very Large Telescope. SHαDE is designed to study the kinematics and stellar populations of dwarf galaxies using consistent methods applied to massive galaxies and at matching level of detail, connecting these mass ranges in an unbiased way. In this paper, we set out the science goals of SHαDE, describe the sample properties, outline the data reduction, and analysis processes. We investigate the log M⋆–log S0.5 mass–kinematics scaling relation, which has previously shown potential for combining galaxies of all morphologies in a single scaling relation. We extend the scaling relation from massive galaxies to dwarf galaxies, demonstrating this relation is linear down to a stellar mass of M⋆ ∼ 108.6 M⊙. Below this limit, the kinematics of galaxies inside one effective radius appears to be dominated by the internal velocity dispersion limit of the H α-emitting gas, giving a bend in the log M⋆–log S0.5 relation. Replacing stellar mass with total baryonic mass using gas mass estimate reduces the severity but does not remove the linearity limit of the scaling relation. An extrapolation to estimate the galaxies’ dark matter halo masses, yields a log Mh–log S0.5 scaling relation that is free of any bend, has reduced curvature over the whole mass range, and brings galaxies of all masses and morphologies on to the virial relation.

Barat, Dilyar↗

Measurement of jet substructure observables in t t ¯ events from proton-proton collisions at s = 13 TeV

A measurement of jet substructure observables is presented using t t ¯ events in the lepton+jets channel from proton-proton collisions at √s=13 TeV recorded by the CMS experiment at the LHC, corresponding to an integrated luminosity of 35.9 fb -1 . Multiple jet substructure observables are measured for jets identified as bottom, light-quark, and gluon jets, as well as for inclusive jets (no flavor information). The results are unfolded to the particle level and compared to next-to-leading-order predictions from powheg interfaced with the parton shower generators pythia 8 and herwig 7, as well as from sherpa 2 and Dire 2. A value of the strong coupling at the Z boson mass, α S (m Z )=0.115$+0.015\atop{-0.013}$, is extracted from the substructure data at leading-order plus leading-log accuracy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SU-E-T-545: MLC Distance Travelled as a Predictor for Motor Failure

Purpose: To study the frequency of Multi-Leaf Collimator (MLC) leaf failures, investigate methods to predict them and reduce linac downtime. Methods: A Varian HD120 MLC was used in our study. The hyperterminal MLC errors logged from 06/2012 to 12/2014 were collected. Along with the hyperterminal errors, the MLC motor changes and all other MLC interventions by the linear accelerator engineer were recorded. The MLC dynalog files were also recorded on a daily basis for each treatment and during linac QA. The dynalog files were analyzed to calculate root mean square errors (RMS) and cumulative MLC travel distance per motor. An in-house MatLab code was used to analyze all dynalog files, record RMS errors and calculate the distance each MLC traveled per day. Results: A total of 269 interventions were recorded over a period of 18 months. Of these, 146 included MLC motor leaf change, 39 T-nut replacements, and 84 MLC cleaning sessions. Leaves close to the middle of each side required the most maintenance. In the A bank, leaves A27 to A40 recorded 73% of all interventions, while the same leaves in the B bank counted for 52% of the interventions. On average, leaves in the middle of the bank had their motors changed approximately every 1500m of travel. Finally, it was found that the number of RMS errors increased prior to an MLC motor change. Conclusion: An MLC dynalog file analysis software was developed that can be used to log daily MLC usage. Our eighteen-month data analysis showed that there is a correlation between the distance an MLC travels, the RMS and the life of the MLC motor. We plan to use this tool to predict MLC motor failures and with proper and timely intervention, reduce the downtime of the linac during clinical hours.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Utah FORGE: Well 58-32 Core Analyses

This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF format, and spreadsheets containing tables from the reports as part of Utah FORGE Phase 2B. Please refer to the reports for full information regarding the tables in the spreadsheets. There is also a ReadMe.text with well coordinates.

15 GEOTHERMAL ENERGY↗

wa-hls4ml and lui-gnn: A benchmark and GNN-based surrogate model for hls4ml resource and latency estimation

As machine learning (ML) increasingly serves as a tool for addressing real-time challenges in scientific applications, the development of advanced tooling has significantly reduced the time required to iterate on various designs. These advancements have solved major obstacles, but also exposed new challenges. For example, processes that were not previously considered bottlenecks, such as model synthesis, are now becoming limiting factors in the rapid iteration of designs. To reduce these emerging constraints, multiple efforts are being launched toward designing an ML-based surrogate model that estimates resource usage of synthesized accelerator architectures. This model would reduce the design iteration time, especially when designing within a set of given hardware constraints. This approach shows considerable potential, but as it stands, the effort is early and would benefit from coordination and standardization to assist future work as it emerges. We introduce wa-hls4ml, a benchmark for ML accelerator resource and latency estimation, and its corresponding initial dataset of more than 100,000 fully connected neural networks, all synthesized using hls4ml and targeting Xilinx FPGAs. In addition to the resource utilization and latency data provided, the dataset includes generated artifacts and log files for many of the synthesized neural networks, in order to support future research in ML-based code generation. The benchmark evaluates the performance of resource and latency predictors against several common ML model architectures, primarily originating from scientific domains, as exemplar models, as well as the average performance across a subset of the dataset. We measure the performance of a given predictor model through multiple metrics, including $R^2$ score and SMAPE on regression tasks, as well as inference time to further characterize the estimator under test. Additionally, we introduce the latency/utilization inference graph neural network (lui-gnn), a surrogate model that uses a graph neural network to represent input architectures in the form of a directed graph. This graph representation allows for a diverse set of model architectures to all be effectively handled by a surrogate model. We present the architecture and performance of the model, as evaluated by the new proposed benchmark, including SMAPE, $R^2$ score, and inference times, and find that lui-gnn generally predicts latency and utilization for the 75\% quantile within several percent of the synthesized resources on the synthetic test dataset, indicating that this approach of estimating resource and latency via a surrogate models has promise and warrants further research.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

West Pearl Queen CO2 sequestration pilot test and modeling project 2006-2008.

The West Pearl Queen is a depleted oil reservoir that has produced approximately 250,000 bbl of oil since 1984. Production had slowed prior to CO{sub 2} injection, but no previous secondary or tertiary recovery methods had been applied. The initial project involved reservoir characterization and field response to injection of CO{sub 2}; the field experiment consisted of injection, soak, and venting. For fifty days (December 20, 2002, to February 11, 2003) 2090 tons of CO{sub 2} were injected into the Shattuck Sandstone Member of the Queen Formation at the West Pearl Queen site. This technical report highlights the test results of the numerous research participants and technical areas from 2006-2008. This work included determination of lateral extents of the permeability units using outcrop observations, core results, and well logs. Pre- and post-injection 3D seismic data were acquired. To aid in interpreting seismic data, we performed numerical simulations of the effects of CO{sub 2} replacement of brine where the reservoir model was based upon correlation lengths established by the permeability studies. These numerical simulations are not intended to replicate field data, but to provide insight of the effects of CO{sub 2}.

02 PETROLEUM↗

Strong coupling in (2+1+1)-flavor QCD

The strong coupling $\alpha_\mathrm{s}$ can be obtained from the static energy as shown in previous lattices studies. For short distances, the static energy can be calculated both on the lattice with the use of Wilson line correlators, and with the perturbation theory up to three loop accuracy with leading ultrasoft log resummation. Comparing the perturbative expression and lattice data allows for precise determination of $\alpha_\mathrm{s}(m_Z)$. We will present preliminary results for the determination of $\alpha_\mathrm{s} {(M_Z)}$ in (2+1+1)-flavor QCD using the configurations made available by the MILC-collaboration with smallest lattice spacing reaching 0.0321~fm.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Anatomy of an Unusual Edge-on Protoplanetary Disk. I. Dust Settling in a Cold Disk

As the earliest stage of planet formation, massive, optically thick, and gas-rich protoplanetary disks provide key insights into the physics of star and planet formation. When viewed edge-on, high-resolution images offer a unique opportunity to study both the radial and vertical structures of these disks and relate this to vertical settling, radial drift, grain growth, and changes in the midplane temperatures. In this work, we present multi-epoch Hubble Space Telescope and Keck scattered light images, and an Atacama Large Millimeter/submillimeter Array 1.3 mm continuum map for the remarkably flat edge-on protoplanetary disk SSTC2DJ163131.2–242627, a young solar-type star in ρ Ophiuchus. We model the 0.8 μm and 1.3 mm images in separate Markov Chain Monte Carlo (MCMC) runs to investigate the geometry and dust properties of the disk using the MCFOST radiative transfer code. In scattered light, we are sensitive to the smaller dust grains in the surface layers of the disk, while the submillimeter dust continuum observations probe larger grains closer to the disk midplane. An MCMC run combining both data sets using a covariance-based log-likelihood estimation was marginally successful, implying insufficient complexity in our disk model. The disk is well characterized by a flared disk model with an exponentially tapered outer edge viewed nearly edge-on, though some degree of dust settling is required to reproduce the vertically thin profile and lack of apparent flaring. A colder than expected disk midplane, evidence for dust settling, and residual radial substructures all point to a more complex radial density profile to be probed with future, higher-resolution observations.

47 OTHER INSTRUMENTATION↗

Identifying Circumgalactic Medium Absorption in QSO Spectra: A Bayesian Approach

We present a study of candidate galaxy–absorber pairs for 43 low-redshift QSO sightlines (0.06 < z < 0.85) observed with the Hubble Space Telescope/Cosmic Origins Spectrograph that lie within the footprint of the Sloan Digital Sky Survey with a statistical approach to match absorbers with galaxies near the QSO lines of sight using only the SDSS Data Release 12 photometric data for the galaxies, including estimates of their redshifts. Our Bayesian methods combine the SDSS photometric information with measured properties of the circumgalactic medium to find the most probable galaxy match, if any, for each absorber in the line-of-sight QSO spectrum. We find ~630 candidate galaxy–absorber pairs using two different statistics. The methods are able to reproduce pairs reported in the targeted spectroscopic studies upon which we base the statistics at a rate of 72%. The properties of the galaxies comprising the candidate pairs have median redshift, luminosity, and stellar mass, all estimated from the photometric data, $z$ = 0.13, L = 0.1$L$ * , and $\mathrm{log}({M}_{* }/{M}_{\odot })=9.7$. The median impact parameter of the candidate pairs is ~430 kpc, or ~3.5 times the galaxy virial radius. The results are broadly consistent with the high Ly$α$ covering fraction out to this radius found in previous studies. In conclusion, this method of matching absorbers and galaxies can be used to prioritize targets for spectroscopic studies, and we present specific examples of promising systems for such follow-up.

79 ASTRONOMY AND ASTROPHYSICS↗

Overview of the FAF3 Freight Flow Matrix Construction Process

PROJECT DESCRIPTION The FAF3 is a FHWA freight data product which provides a national O-D matrix of commodity flows to, from, and within the United States. FAF3 freight flows are reported in terms of both annual tons and annual dollars of freight moved by mode of transportation. Based largely on the 2007 CFS, FAF3 utilizes domestic freight flow characteristics, geographic regions, and the SCTG commodity coding system from CFS. However, many freight flows were not captured by the 2007 CFS due to scope and sample size limitations. Approximately 100,000 establishments were sampled out of some 754,000 freight moving establishments in 2007 and imports are out of scope entirely. To estimate missing data values, the approach taken in FAF3 was to use a combination of a novel Log-linear modeling approach (LLM) with an iterative proportional fitting (IPF) routine that also uses additional data inputs to fill in the missing pieces. The complete FAF3 O-D Commodity Mode database is made up of 131 Origins x 131 Destinations x 43 Commodity Classes x 8 Modal categories, for annual tons and dollars. This poster illustrates how the 2007 CFS data were integrated with several additional data sources using LLM and IPF to create a comprehensive FAF3 national freight flow matrix. More detailed documentation on the sources and methods utilized in the development of FAF3 are available from the FHWA website at the following website: http://www.ops.fhwa.dot. gov/freight/freight_analysis/faf/index.htm.

99 GENERAL AND MISCELLANEOUS↗

Particle Number Concentrations for HI-SCALE Field Campaign Report

In support of the Holistic Interactions of Shallow Clouds, Aerosols, and Ecosystems (HI-SCALE) project to study new particle formation in the atmosphere, a pair of custom water condensation particle counters were provided to the second intensive field campaign, from mid-August through mid-September 2017, at the U.S. Department of Energy Southern Great Plains Atmospheric Radiation Measurement (ARM) Climate Research Facility observatory. These custom instruments were developed by Aerosol Dynamics, Inc. (Hering et al. 2017) to detect particles into the nanometer size range. Referred to as “versatile water condensation particle counter (vWCPC)”, they are water-based, laminar-flow condensational growth instruments whose lower particle size threshold can be set based on user-selected operating temperatures. For HI-SCALE, the vWCPCs were configured to measure airborne particle number concentrations in the size range from approximately 2nm to 2μm. Both were installed in the particle sizing system operated by Chongai Kuang of Brookhaven National Laboratory (BNL). One of these was operated in parallel to a TSI Model 3776, upstream of the mobility particle sizing system, to measure total ambient particle concentrations. The airborne particle concentration data from this “total particle number vWCPC” (Ntot-vWCPC) system has been reported to the ARM database. The data are reported with one-second resolution. The second vWCPC was operated in parallel with the BNL diethylene glycol instrument to count particles downstream of a separate differential mobility size analyzer. Data from this “DMA-vWCPC” system was logged by BNL, and will eventually be provided by that laboratory.

HI-SCALE, aerosol particle number concentration, v↗

Modeling behavior in a network using event logs

A framework is provided for modeling the activity surrounding user credentials and/or machine level activity on a computer network using computer event logs by viewing the logs attributed to each user as a multivariate data stream. The methodology performs well in detecting compromised user credentials at a very low false positive rate. Such a methodology may detect both users of compromised credentials by external actors and otherwise authorized users who have begun engaging in malicious activity.

Turcotte, Melissa J. M.↗

Strong coupling constant from 1-loop improved static energy

The static energy is an excellent observable for extracting the strong coupling $α_s$ on the lattice. For short distances, the static energy can be calculated both on the lattice using Wilson line correlators, and with perturbation theory up to three loop accuracy with leading ultrasoft log resummation. Comparing the perturbative expression and lattice data allows for precise determination of $α_s$. We present early results for 1-loop lattice perturbation theory improvement of the Wilson loop and show how it improves the $α_s$ extraction. We present a preliminary reanalysis of the TUMQCD (2+1)-flavor QCD data.

Leino, Viljami [U. Southern Denmark, QTC; Southern↗

Age at exposure and attained age variations of cancer risk in the Japanese A-bomb and radiotherapy cohorts

Purpose: Phenomenological risk models for radiation-induced cancer are frequently applied to estimate the risk of radiation-induced cancers at radiotherapy doses. Such models often include the effect modification, of the main risk to radiation dose response, by age at exposure and attained age. The aim of this paper is to compare the patterns in risk effect modification by age, between models obtained from the Japanese atomic-bomb (A-bomb) survivor data and models for cancer risks previously reported for radiotherapy patients. Patterns in risk effect modification by age from the epidemiological studies of radiotherapy patients were also used to refine and extend the risk effect modification by age obtained from the A-bomb survivor data, so that more universal models can be presented here. Methods: Simple log-linear and power functions of age for the risk effect modification applied in models of the A-bomb survivor data are compared to risks from epidemiological studies of second cancers after radiotherapy. These functions of age were also refined and fitted to radiotherapy risks. The resulting age models provide a refined and extended functional dependence of risk with age at exposure and attained age especially beyond 40 and 65 yr, respectively, and provide a better representation than the currently available simple age functions. Results: It was found that the A-bomb models predict risk similarly to the outcomes of testicular cancer survivors. The survivors of Hodgkin’s disease show steeper variations of risk with both age at exposure and attained age. The extended models predict solid cancer risk increase as a function of age at exposure beyond 40 yr and the risk decrease as a function of attained age beyond 65 yr better than the simple models. Conclusions: The standard functions for risk effect modification by age, based on the A-bomb survivor data, predict second cancer risk in radiotherapy patients for ages at exposure prior to 40 yr and attained ages before 55 yr reasonably well. However, for larger ages, the refined and extended models can be applied to predict the risk as a function of age.

60 APPLIED LIFE SCIENCES↗

A Comprehensive System of Energy Intensity Indicators for the US: Methods, Data and Key Trends

This report provides an update to a previously published (Rev 1) report that describes a comprehensive system of energy intensity indicators for the United States that has been developed for the Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) over the past decade. This system of indicators is hierarchical in nature, beginning with detailed indexes of energy intensity for various sectors of the economy, which are ultimately aggregated to an overall energy intensity index for the economy as a whole. The aggregation of energy intensity indexes to higher levels in the hierarchy is performed with a version of the Log Mean Divisia index (LMDI) method. Based upon the data and methods in the system of indicators, the economy-wide energy intensity index shows a decline of about 14% in 2011 relative to a 1985 base year. Discussion of energy intensity indicators for each of the broad end-use sectors of the economy—residential, commercial, industrial, and transportation—is presented in the report. An analysis of recent changes in the efficiency of electricity generation in the U.S. is also included. A detailed appendix describes the data sources and methodology behind the energy intensity indicators for each sector.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗