Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETOMETERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Chemically Synthesized FeCo Powder for Advanced Applications

Very weak stray magnetic fields, H ∼ 10{sup − 4} Oe, of an assembly of FeCo particles of mesoscopic dimensions, d = 10–50 μm, are investigated using a sensitive scanning giant magneto-impedance magnetometer. Direct magnetic force microscopy measurement of individual FeCo particles reveals a complicated domain structure. It is proved, however, that the mean square value of the stray magnetic field of a dilute assembly of FeCo particles randomly distributed on the plane is a statistically well-defined quantity. It depends on the average particle diameter, average distance between the particles, and average particle magnetization per unit volume. It is shown that the average particle magnetization can be determined using a measured mean square value of the stray magnetic field and geometrical parameters of the assembly obtained from optical measurement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Fe and Co Co-doping on Structural, Magnetic, and Optical Properties of Ti{sub 0.9}Fe{sub 0.1−x}Co{sub x}O{sub 2} Magnetic Semiconductors

A series of six samples with a general formula Ti{sub 0.9}Fe{sub 0.1−x}Co{sub x}O{sub 2} (x = 0.0, 0.02, 0.04, 0.06, 0.08, and 0.1) has been synthesized by solid-state reaction method at annealing temperature of 1150 {sup ∘}C for 2 hours. The synthesized samples have been characterized by X-ray diffractometer, Raman spectroscopy, scanning electron microscopy, EDX, vibrating sample magnetometer, and ultraviolet-visible spectroscopy to investigate structural, defective, morphological, elemental, magnetic, and optical properties. Structural analysis revealed dominant structure of rutile with a minor peak of hematite and anatase. An intensity loss and peak broadening of TiO{sub 2} (rutile) vibration lines has been observed from Raman analysis. Magnetic characterization showed ferromagnetic behavior at room temperature. Optical characterization revealed blue shift in band gap energy with increasing amount of Co concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the Laser Scan Rate on the Microstructure, Magnetic Properties, and Microhardness of Selective Laser-Melted FeSiB

FeSiB alloys have been fabricated by selective laser melting (SLM) using a laser scan rate of 0.1–1.5 m/s, laser power of 90 W, scan line spacing of 40 μ m, and layer thickness of 50 μ m. X-ray diffraction, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, atomic force microscopy, profilometer, microdurometer, and vibrating sample magnetometer have been used to investigate the structural, microstructural, roughness, microhardness, and magnetic property changes during the laser melting process. The produced samples exhibit a nanocomposite structure consisting of nanocrystalline α-Fe{sub 0.95}Si{sub 0.05} and Fe{sub 2}B phases embedded into an amorphous ε-FeSi-type matrix. The selective laser-melted samples show high density, low surface roughness, higher microhardness values (1654–2273 Hv), and soft magnetic properties (M{sub s} = 188.6–199 emu/g and H{sub c} = 43.8–73 Oe).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced Magneto-optical and Photocatalytic Properties of Ferromagnetic Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} (0.0 ≤ y ≤ 1.0) Spinel Nano-ferrites

Spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} (0.0 ≤ y ≤ 1.0) ferrite magnetic nanoparticles (MNPs) were synthesized by a sol-gel combustion method using urea as the reducing agent/fuel. Powder X-ray diffraction (XRD) analysis revealed the formation of cubic spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} powders and confirmed pure crystalline phase and the average crystalline size of 21.25 to 17.04 nm. Functional group bonds between metal and oxygen (M–O) were confirmed by Fourier transform infrared (FT-IR) spectra. The microstructure of the powders was recorded by high-resolution scanning electron microscope (HR-SEM) and confirmed the particle-like surface morphology with smaller agglomeration, due to the magnetic interaction of the particles. Energy-dispersive X-ray (EDX) results showed the composition of the expected elements and confirmed the phase purity of the products. Vibrating sample magnetometer (VSM) technique recorded at room temperature was used to analyse the magnetic properties of the samples and the hysteresis loops showed the ferromagnetic behaviour. Moreover, the samples Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} NPs were tested for the photocatalytic degradation (PCD) of methylene blue (MB) dye and the sample y = 0.6 showed maximum degradation efficiency (96.83 %), due to the smaller particle size with higher surface area than other compositions. Furthermore, spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} nano-photocatalysts can be reused several times without change of its catalytic activity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and Structural Properties of Novel Neodymium-Tin Spinel Ferrite Nanoparticles

Novel spinel neodymium-tin ferrite nanoparticles (Nd{sub 0.5}Sn{sub 0.5}Fe{sub 2}O{sub 4}) have been synthesized by the coprecipitation method; x-ray diffraction (XRD), transmission electron microscopy (TEM), and superconducting quantum interference device magnetometer (SQUID) techniques were used to characterize the crystal structure, morphology, and magnetic properties. The spinel structure of a single phase is obtained according to XRD results. From TEM characterization results, we obtained a spherical morphology with an average of 13 nm. Magnetic measurement indicates that the nanoparticles have a superparamagnetic phase with a corresponding blocking temperature (T{sub B}) of about 360 K. These new nanomaterials can potentially be used in nanoelectronic devices, magnetic sensors, and hyperthermia application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of the Milling Conditions on the Properties of ZnO Doped with Fe

(Zn{sub 0.9}Fe{sub 0.1})O powders were produced with different ball to powder weight ratios (BPR) by ball milling of ZnO and Fe elemental powders. The BPR used were 15:1, 20:1, 25:1, and 30:1. The prepared samples were studied by x-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Mössbauer spectroscopy (MS). The XRD patterns showed a zinc oxide (ZnO) single phase with wurtzite structure, except for the 15:1 ratio, which exhibits an additionally bcc structure associated to α-Fe. The mean crystallite sizes were found to be around 100 Å. The Mössbauer spectra were fitted using two doublets, associated to the incorporation of Fe ions into the ZnO lattice, which correspond to the Fe{sup 3+} and Fe{sup 2+} oxidation states except for the 15:1 ratio, for which an additional sextet was necessary to obtain a good fit, this sextet was associated to segregated Fe into the sample. The increase of the BPR allowed that all Fe penetrated into the ZnO matrix. The magnetization measurement using VSM reveals that the system exhibits ferromagnetic behavior at room temperature. For sample with BPR 15:1, the ferromagnetism is due to the segregated Fe, and for higher BPRs, from 20:1 up to 30:1, we propose that their ferromagnetism is due to the percolation of polarons. These polarons appear due to the oxygen vacancies (detected by XRD) which are occupied by electrons, which appear in the charge balance. Exchange interaction between the electron spins located in the vacancies or holes and those of the magnetic impurities (Fe atoms) leads to the formation of bound magnetic polarons, which percolate, producing in this way magnetic behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Martensitic Transformation and Magnetic Properties of the CuAl, CuAlMn, and CuAlMnZn Alloys

In the present work, the effect of alloying elements on the phase transformation which are formed by cooling effect in CuAl, CuAlMn, and CuAlMnZn (wt%) alloys are investigated using scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM) characterization techniques. From SEM observations, the martensite formation with different morphologies is observed in these alloys. But the results of the scanning electron microscope investigations presented in this work have not formed the precipitates in the CuAl alloy with Mn or Zn additions. We found that magnetic saturation and coercivity values decreased with the addition of Mn and Zn elements to the CuAl alloy. The findings confirmed the variation in magnetic properties, which occurred in the result of adding different alloying elements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning of Magnetic and Optical Properties of Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} Spinel Ferrite Thin Films Based on Post Annealing Temperature

This paper is dedicated to deposit zinc substituted cobalt ferrite (Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4}) thin films on glass substrate using electron beam deposition technique. The effect of post annealing temperature on structural, magnetic, and optical properties of thin films has been investigated. Thin films have been characterized using x-ray diffraction (XRD), Raman spectroscopy, atomic force microscopy (AFM), vibrating sample magnetometer (VSM), UV-VIS spectroscopy, and spectroscopic ellipsometry (SE) analysis. The as-deposited thin films are amorphous in nature. After deposition, these thin films post annealed at different temperature ranges from 200 to 500 {sup ∘}C to enhance the crystallinity of films. The film post annealed at 200 {sup ∘}C is also amorphous in nature. As the post annealing temperature increases, the thin films become more crystalline. X-ray diffractometer and Raman analysis confirm the formation of cubical inverse spinel structure of thin films. The saturation magnetization of the thin films decreases with the annealing temperature due to the sites occupancy of cations between tetrahedral and octahedral. The reduction in coercivity is correlated with the anisotropy constant, but the anisotropy value is still high which is suitable to form stable magnetic storage memories. The band gap energy are decreased which is mainly attributed due to increase in grain size of the film. It is noted that the band gap energy of these thin films are higher than that of bulk material, so these may be suggested for use in wide band gap applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simple Hydrothermal Synthesis for Mesoporous Pebble-Like NiCo{sub 2}O{sub 4} Nanostructures and Their Attractive Magnetic Properties

The mesoporous pebble-like NiCo{sub 2}O{sub 4} nanostructures were smoothly obtained via a simple hydrothermal route and the succeeding annealing treatment. Various techniques, including XRD, SEM, TEM, Raman spectra, FTIR, and MH curves have been used to study the obtained products. The obtained results exhibited that the morphology of spinel NiCo{sub 2}O{sub 4} could be controlled by adjusting the content of cetyltrimethylammonium bromide (CTAB). The morphology of NiCo{sub 2}O{sub 4} nanostructures transformed from a 300-nm popcorn-like to 30–40-nm pebble-like nanostructure by changing the content of CTAB. Compared with the popcorn-like NiCo{sub 2}O{sub 4} nanostructures, the pebble-like samples showed effective blue shifting of Raman spectroscopy, which might be due to the nano-sized effect of NiCo{sub 2}O{sub 4} particles. Finally, vibration sample magnetometer (VSM) measurements indicated the samples transformed from weak ferromagnetic (popcorn-like) to paramagnetic (pebble-like) due to small particle size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Magnetic Characteristics of Ferroxplana Co{sub 2}Y Nanoferrites Synthesized via Two Chemical Routes

Barium Y-type hexaferrite Ba{sub 2}Co{sub 2}Fe{sub 12}O{sub 22} nanopowders have been purposefully tailored using two different chemical wet methods, namely sol-gel auto-combustion (SGA) and co-precipitation (CP) routes. The impact of the pre-annealing and the annealing temperature of the formed precursors synthesized using two strategies on the structural, microstructure, and magnetic properties was investigated using x-ray diffraction (XRD), scanning electron microscopic (SEM), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM). For instance, well-defined Ba{sub 2}Co{sub 2}Fe{sub 12}O{sub 22} hexagonal plate-like particles was observed using SGA and CP routes for the precursors pre-annealed at 600 {sup ∘}C for 4 h and then annealed at low temperature 1000 {sup ∘}C for 2 h. The magnetic properties measured at room temperature evinced that hexaferrite Co{sub 2}Y particles have ferromagnetic characteristics. Good magnetic properties involving saturation magnetization (M{sub s}) of 23.64 and 24.37 emu/g and the coercivity (H{sub c}) of 417.76 and 280.92 Oe were accomplished for the samples pre-annealed at 600 {sup ∘}C for 4 h and then annealed at 1000 {sup ∘}C for 2 h for SGA and CP methods, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and Characterization of Nanocopper Ferrite and Its Green Catalytic Activity in Alcohol Oxidation Reaction

A new type of magnetic material copper ferrite (CuFe{sub 2}O{sub 4}) is successfully manufactured through microwave combustion method. Starch has been tested as a single fuel in this combustion-based synthesis of copper ferrite by using different fuel compositions and equivalence ratios (fuel/oxidant). The formed copper ferrite is characterized by X-ray diffraction analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) spectroscopy. Magnetic properties of the prepared copper ferrite are analyzed by vibrating sample magnetometer (VSM). Surface area is measured by the nitrogen adsorption/desorption isotherms. A detailed examination of the morphology of the material in various microwave method-catalyzed processes shows that they provide an optimum catalytic activity due to a combination of lower crystal size and higher activity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Infrared Spectroscopic Study of Magnetic Behavior of Dysprosium Doped Magnetite Nanoparticles

Dysprosium doped magnetite (Fe{sub 3−x}Dy{sub x}O{sub 4} with x = 0.0–0.1) nanoparticles have been synthesized using the co-precipitation method. Magnetic characterization using vibrating sample magnetometer (VSM) has revealed an enhancement in the saturation magnetization with Dy{sup 3+} doping. The occupancy of the dopant ions in magnetite lattice has been probed using Fourier transform infrared spectroscopy (FTIR). The shifting of ν{sub 2} (Fe–O) band at 452 cm{sup − 1} for undoped samples to 443 cm{sup − 1} for dysprosium-doped samples is indicative of occupancy of dysprosium at the octahedral site. X-ray diffraction (XRD) patterns have been used to calculate the strain and lattice constant. The strain is found to increase with doping level and attained a maximum value for the x = 0.03. This increase in the strain can be attributed to occupancy of large diameter Dy{sup 3+} ions at the octahedral site of spinel structure of the magnetite lattice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects on Glass Forming Ability, Microstructure, Crystallization Behaviors, and Magnetic Properties of Si Substituting for P in Fe-Rich Fe{sub 86}B{sub 13−x}Si{sub x}P{sub 1}Cu{sub 0.6}Hf{sub 0.4} Alloys

In the paper, we have studied the effects on glass forming ability (GFA), microstructure, crystallization behaviors, and saturation magnetization (M{sub s}) of Si substitution for P in Fe-rich Fe{sub 86}B{sub 12}Si{sub x}P{sub 1−x}Cu{sub 0.4}Hf{sub 0.6} alloys. The amorphous structure is identified by X-ray diffraction first, and the patterns with Si addition less than x = 0.75 only show one halo scattering peak at 2θ = 45°; further, the ribbons with entirely amorphous structure have been fabricated successfully and the alloys have a good GFA. Then, by differential scanning calorimetry testing, the curves show two separated exothermic peaks and the ribbons will go through a two-step crystallization before reaching stable state; further, the first peak is ensured by the crystallization of a-Fe phase while the second peak is ensured by the precipitation of FeB or Fe(BP) compounds. As Si was added, the apparent activation energy of the first crystallization (E{sub a1}) and the second crystallization (E{sub a2}) shows an increased tendency first and then decreases slightly. By comparison, as x = 0, x = 0.25, and x = 0.5, the ribbons easily form Hf{sub 3}P{sub 2} compounds during the first crystallization process simultaneously, where the ribbons of x = 0.75 and x = 1.0 are easier to finish the first crystallization for forming the uniform a-Fe phase entirely. By vibrating sample magnetometer testing, with the addition of Si, M{sub s} value shows an increased trend and reaches to the maximum about 177.5 emu/g (x = 1.0), and which shows an increased trend in the subsequent annealing process and reaches to the maximum 206.3 emu/g (x = 0), 212.3 emu/g (x = 0.25), 214.2 emu/g (x = 0.5), 214.9 emu/g (x = 0.75), and 208.3 emu/g (x = 1.0) as the annealing temperature higher than T{sub p1} but less than T{sub x2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mössbauer Studies and Magnetic Properties of Cubic CuFe{sub 2}O{sub 4} Nanoparticles

This study reports the preparation and characterization of nanocrystalline spinel powder of cubic copper ferrite nanoparticles (NPs) which have been fabricated via a cost-effective citrate sol–gel approach. The structural and morphological properties of the nanoparticles are analyzed by X-ray diffraction (XRD), Fourier transform spectroscopy (FT-IR), and scanning electron microscopy (SEM) whereas magnetic properties and Mössbauer analysis were performed using vibrating sample magnetometer (VSM) and Mössbauer spectra, respectively, and were characterized in detail. The empirical aim of this study is to perceive the transition phase of CuFe{sub 2}O{sub 4} as cubic symmetry which was confirmed by SEM images, and a couple of studies reported on the cubic structure of copper ferrite and discussed the magnetic properties. However, the present study gives the detailed information of the formation of cubic structure and magnetic behavior of the CuFe{sub 2}O{sub 4} cubic structure. X-ray diffraction measurements of resulting NPs show that the grain size of the particles is about 42.08 nm while SEM analysis showed that the particles have cubic nanostructured shapes with non-homogeneous sizes in around 80–100 nm. From {sup 57}Fe, Mössbauer parameters consist of one superparamagnetic doublet and superposition of four sextets. VSM result shows the enhanced superparamagnetic nature of the CuFe{sub 2}O{sub 4} NPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of the Boron Content on the Amorphization Process and Magnetic Properties of the Mechanically Alloyed Fe{sub 92−x}Nb{sub 8}B{sub x} Powders

The effect of the B content on the microstructural, structural, and magnetic properties of partially amorphous Fe{sub 92−x}Nb{sub 8}B{sub x} (x = 5, 10, 15, and 20) alloys has been investigated by means of scanning electron microscopy, X-ray diffraction, high and low-temperature extraction-type magnetometers. The XRD results reveal the formation of a nanocomposite structure where nanocrystalline bcc α-Fe and Fe{sub 2}B phases are embedded into an amorphous matrix. The FeB boride is observed for higher boron contents (x = 15 and 20), and the crystallite sizes are in the range of 7–24 nm. As the B content increases, the amorphous phase-relative proportion and coercivity increase, whereas the saturation magnetization decreases. An important magnetic hardening occurs by lowering the temperature from 400 to 5 K for x = 20% B. The variation of the Curie temperature can be attributed to the heterogeneity of the amorphous matrix.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Fe/Mo Ordering and Magnetic Properties of Ca{sub 2}Fe{sub x}Mo{sub 2−x}O{sub 6} (x = 0.9, 1.0, 1.1 and 1.2) Double Perovskites Prepared by Sonochemical Method

Characterization, Fe/Mo ordering and magnetic properties of Ca{sub 2}Fe{sub x}Mo{sub 2−x}O{sub 6} (x = 0.9, 1.0, 1.1 and 1.2) (CFMO) double perovskite have been studied. Sonochemical methodology is adopted to synthesize Ca{sub 2}Fe{sub x}Mo{sub 2−x}O{sub 6} double perovskite at low temperature (950 {sup ∘} C) under Ar/H{sub 2} atmosphere. Single-phase monoclinic structure by space group P2{sub 1}/n, lattice parameters (a, b and c) and unit cell volume (V ) have been confirmed from X-ray diffraction (XRD) patterns. Average grain sizes of 145 nm with a variation of porosity were observed from scanning electron microscopy (SEM) pictures. Elemental analysis using energy-dispersive X-ray spectroscopy (EDS) confirmed the presence of elements Ca, Fe, Mo and O with no trace of foreign elements, and the compound is found to be pure. Fourier transform infrared spectroscopy (FTIR) data confirmed perovskite formation by identifying three characteristic absorption bands in the wave number range 400–1000 cm{sup − 1} for Mo-O and Fe-O vibrations. Magnetic properties like M{sub s}, M{sub r} and H{sub c} were studied for CFMO series using vibrating sample magnetometer (VSM). Saturation magnetization is found to vary with Fe composition (x).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

No Signature of Room Temperature Ferromagnetism in Fe-Doped ITO Thin Films

Iron (Fe)-doped indium tin oxide thin films (In{sub 0.95 − x}Fe{sub x}Sn{sub 0.05}){sub 2}O{sub 3} at x = 0.00, 0.05, 0.10, and 0.15 were deposited onto glass substrates using an electron beam evaporation technique. The coated thin films were characterized by X-ray diffractometer (XRD), UV-VIS-NIR spectrophotometer, photoluminescence spectrophotometer, scanning electron microscope, and vibrating sample magnetometer to study their structural, optical, morphological, and magnetic properties, respectively. The crystallite size of the films increased from 18 to 30 nm with Fe concentration (x). The morphology showed the formation of nanorods. The bandgap of the films decreased from 3.94 to 3.81 eV. The X-ray photoelectron spectroscopy (XPS) studies confirm the presence of Fe ions in two different oxidation states (Fe{sup 2+}, Fe{sup 3+}). The magnetic studies revealed the paramagnetic behavior of the films at room temperature and at low temperature (5 K). The effective magnetic moment (μ{sub eff}) of Fe-doped indium tin oxide thin films was calculated using Langevin theory of paramagnetism extending to Curie’s law. The effective magnetic moment (μ{sub eff}) was increased on increasing the dopant concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single-Grain Bulk YBa{sub 2}Cu{sub 3}O{sub y} Superconductors Grown by Infiltration Growth Process Utilizing the YbBa{sub 2}Cu{sub 3}O{sub y} + Liquid Phase as a Liquid Source

The top-seeded infiltration growth (IG) processed YBa{sub 2}Cu{sub 3}O{sub y} (Y-123) has several advantages compared to the same material produced by other melt process techniques. There is usually no shrinkage, a limited number of pores, and an uniform secondary phase particle dispersion in the Y-123 matrix. These characteristics of the IG process are very attractive for several industrial applications. In this paper, we produced a large single-grain Y-123 by IG and top seeded melt-growth process. Utilizing commercial YbBa{sub 2}Cu{sub 3}O{sub y} (Yb-123) and a homemade Y{sub 2}BaCuO{sub 5} (Y-211), we produced bulk YBa{sub 2}Cu{sub 3}O{sub y} samples using Yb-123 + liquid (1:1) as a liquid source. Four facet lines on the top surfaces of the as-grown samples indicated a uniform growth from the seed up to sample edges. Magnetization measurements by SQUID magnetometer showed a sharp superconducting transition with T{sub c},{sub onset} at 92.1 K. The critical current density at 77 K and self-field was 39,000 A/cm{sup 2}. Trapped field results confirmed that single grain Y-123 samples were produced utilizing the above process. Our results prove that Yb-123 + liquid (1:1) as a liquid source is effective in producing single grain Y-123 material by IG process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗