Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Particle beam experiments for the analysis of reactive sputtering processes in metals and polymer surfaces

A beam experiment is presented to study heterogeneous reactions relevant to plasma-surface interactions in reactive sputtering applications. Atom and ion sources are focused onto the sample to expose it to quantified beams of oxygen, nitrogen, hydrogen, noble gas ions, and metal vapor. The heterogeneous surface processes are monitored in situ by means of a quartz crystal microbalance and Fourier transform infrared spectroscopy. Two examples illustrate the capabilities of the particle beam setup: oxidation and nitriding of aluminum as a model of target poisoning during reactive magnetron sputtering, and plasma pre-treatment of polymers (PET, PP)

36 MATERIALS SCIENCE↗

Composition gradient effects on strain relaxation in Sr-doped LaMnO{sub 3} epitaxial thin films

The authors report on a novel method to fabricate Sr-doped composition gradient epitaxial La{sub 1−x}Sr{sub x}MnO{sub 3} thin films by radio frequency magnetron sputtering. Biaxially strained epitaxial La{sub 1−x}Sr{sub x}MnO{sub 3} thin films were grown on (001) LaAlO{sub 3} substrates by following a cosputtering procedure from LaMnO{sub 3} and La{sub 0.67}Sr{sub 0.33}MnO{sub 3} targets. Three depositions were conducted by varying the substrate temperature (750 and 850 °C) and controlling the relative deposition rate from the two targets by varying their power rate during sputtering. The thickness of the thin films was about 20 and 30 nm for the short and long duration deposition, respectively. The films were studied by symmetric θ–2θ x-ray diffraction, pole figure analysis, atomic force microscopy, and x-ray photoelectron spectroscopy. Fabrication of smooth, composition gradient films of high epitaxial quality was achieved at a substrate temperature of 850 °C and low sputtering rate. A novel strain relaxation mechanism is also found that decreases significantly the mismatch between the film and substrate as the Sr doping level increases. The reported deposition procedure can produce new possibilities of designing nanoscale structures with cross coupled properties that may result in new materials.

42 ENGINEERING↗

Plasmonic gold nanoparticles modified titania nanotubes for antibacterial application

Close-packed TiO{sub 2} nanotube arrays are prepared on metallic Ti surface by electrochemical anodization. Subsequently, by magnetron sputtering, Au nanoparticles are coated onto the top sidewall and tube inwall. The Au@TiO{sub 2} systems can effectively kill Staphylococcus aureus and Escherichia coli in darkness due to the existence of Au nanoparticles. On the basis of classical optical theories, the antibacterial mechanism is proposed from the perspective of localized surface plasmon resonance. Respiratory electrons of bacterial membrane transfer to Au nanoparticles and then to TiO{sub 2}, which makes bacteria steadily lose electrons until death. This work provides insights for the better understanding and designing of noble metal nanoparticles-based plasmonic heterostructures for antibacterial application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructural and Superconducting Radiofrequency Properties of Multilayer Sequentially Sputtered Nb 3 Sn films

Nb 3 Sn is considered as a potential candidate for superconducting radiofrequency cavities for particle acceleration due to its higher transition temperature of 18.3 K and higher superheating field of 400 mT. Nb 3 Sn films can be grown inside the surface of a Nb cavity by sequentially sputtering multiple layers of Nb and Sn thin films followed by annealing at 950 °C for 3 h. We report on the properties of Nb 3 Sn films grown on Nb substrates by magnetron sputtering. The films’ crystal structure, surface morphology, and composition were characterized by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The films had a polycrystalline Nb 3 Sn structure with a fine-grain surface and an atomic Sn composition of ~23%. The RF surface resistance of the films was measured for different temperatures at 7.4 GHz to understand the feasibility of this method for the SRF application. The RF surface resistance of the films was 5 mΩ at 12 K, which is about 2 orders of magnitude higher than 60 μΩ previously measured in Nb 3 Sn films grown by Sn vapor diffusion. Finally, the sputtered film had a superconducting transition at 17.2 K, which is also lower than 17.9 K observed in Nb 3 Sn film prepared by vapor diffusion.

43 PARTICLE ACCELERATORS↗

Effect of thermal annealing on the properties of transparent conductive In–Ga–Zn oxide thin films

Amorphous In–Ga–Zn oxide (IGZO) thin films were prepared using radio frequency magnetron sputtering at room temperature. Upon thermal annealing at temperatures even up to 500 °C, the amorphous characteristics were still maintained, but the electronic properties could be considerably enhanced. This could be ascribed to the increased optical band gap and the increased oxygen vacancies, as corroborated by the microstructure characterizations. In addition, the surface became smoother upon thermal annealing, guaranteeing good interface contact between electrode and a-IGZO. The optical transmittance at 400–800 nm exceeded 90% for all samples. All in all, thermal annealing at appropriate temperatures is expected to improve the performances of relevant a-IGZO thin film transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and electronic properties of highly stable and textured hydrogenated ZnO:Al thin films

Highlights: ► We investigate the impact of hydrogen treatment at high temperature of ZnO:Al film. ► Electrical properties of the ZnO:Al films improved due to hydrogen annealing. ► Optical properties of the ZnO:Al films enhanced due to hydrogen annealing. ► ZnO:Al film properties strongly depend on the hydrogen treatment temperature. -- Abstract: We have experimentally investigated the effects of hydrogen-annealing on the structural, electrical, and optical properties of Al-doped ZnO (ZnO:Al) thin films prepared by RF magnetron sputtering at room temperature. From the X-ray diffraction observations, the orientation of ZnO:Al films was found to be a c-axis in the hexagonal structure. We found that intentionally incorporated hydrogen plays an important role in n-type conduction as a donor, improving free carrier concentration and electrical stability. We simultaneously obtained improved optical transmission and enhanced absorption edge of the ZnO:Al film due to hydrogen-annealing. Our experimental data suggest the hydrogen-annealing process as an important role in the enhancement of electrical and optical properties, which is promising as a back reflector material for thin-film solar cells.

36 MATERIALS SCIENCE↗

Elastic buckling of AlN ribbons on elastomeric substrate

For optoelectronic applications requiring unconventional substrates, use of flexible forms of semiconductors may be inevitable. We have fabricated a flexible form of single crystalline AlN ribbons with periodic and wavelike structures on an elastomeric substrate. Single crystalline AlN films were grown on Si (111) substrate using high vacuum unbalanced magnetron sputtering. Crystallinity of the AlN films was confirmed with x-ray diffraction and pole figure. The AlN ribbons were transferred to a prestrained (3.1%) elastomeric substrate and the resulting ''wavy'' ribbons on the substrate were flexible up to 30% strain without any crack formation on the surface. As the film thickness changed from 300 to 900 nm, the periods of the waves varied from 95 to 277 {mu}m, which were within a 10% error of the calculated values. When we applied more than 30% strain, mechanical instability, such as the failure of AlN ribbons due to the cracks on the surface and the merged ribbons, was observed.

36 MATERIALS SCIENCE↗

Fabrication of plastic biochips

A versatile surface functionalization procedure based on rf magnetron sputtering of silica was performed on poly(methylmethacrylate), polycarbonate, polypropylene, and cyclic olefin copolymers (Topas 6015). The hybrid thermoplastic surfaces were characterized by x-ray photoelectron spectrometer analysis and contact angle measurements. The authors then used these hybrid materials to perform a sandwich assay targeting an HIV-1 antibody using fluorescent detection and biotinylated peptides immobilized using the bioaffinity of biotin-neutravidin. They found a limit of detection similar to arrays on glass surfaces and believed that this plastic biochip platform may be used for the development of disposable immunosensing and diagnostic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical Properties of Solid Solutions In{sub x}Al{sub 1–x}N

The phase diagrams and the results of studies of the GaN, AlN and InN ternary solid solutions grown using the magnetron sputtering, molecular beam epitaxy, and metalorganic vapour-phase epitaxy technologies and intended for the production of ultrahigh-frequency InAlN/GaN HEMT transistors are analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Perpendicular magnetic anisotropy in Mn{sub 2}CoAl thin film

Heusler compound Mn{sub 2}CoAl (MCA) is attracting more attentions due to many novel properties, such as high resistance, semiconducting behavior and suggestion as a spin-gapless material with a low magnetic moment. In this work, Mn{sub 2}CoAl epitaxial thin film was prepared on MgO(100) substrate by magnetron sputtering. The transport property of the film exhibits a semiconducting-like behavior. Moreover, our research reveals that perpendicular magnetic anisotropy (PMA) can be induced in very thin Mn{sub 2}CoAl films resulting from Mn-O and Co-O bonding at Mn{sub 2}CoAl/MgO interface, which coincides with a recent theoretical prediction. PMA and low saturation magnetic moment could lead to large spin-transfer torque with low current density in principle, and thus our work may bring some unanticipated Heusler compounds into spintronics topics such as the domain wall motion and the current-induced magnetization reversal.

36 MATERIALS SCIENCE↗

Dielectric properties and tunability of cubic pyrochlore Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films

The Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films with cubic pyrochlore structure were prepared onto Pt-coated sapphire substrates by rf magnetron sputtering deposition from a stoichiometric target. Dielectric measurements indicated that the Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films exhibited low dielectric loss of {approx}0.0018-0.004, medium dielectric constant of {approx}86, and superior tunable dielectric properties at room temperature. A bias field of 1.6 MV/cm resulted in the maximum voltage tunability of 39%. A brief discussion is given on the enhanced tunability compared to Bi{sub 1.5}ZnNb{sub 1.5}O{sub 7} thin films. The low loss and superior tunability make Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films promising for potential tunable capacitor applications.

36 MATERIALS SCIENCE↗

Metastable bcc phase formation in 3d ferromagnetic transition metal thin films sputter-deposited on GaAs(100) substrates

Co{sub 100−x}Fe{sub x} and Ni{sub 100−y}Fe{sub y} (at. %, x = 0–30, y = 0–60) films of 10 nm thickness are prepared on GaAs(100) substrates at room temperature by using a radio-frequency magnetron sputtering system. The detailed growth behavior is investigated by in-situ reflection high-energy electron diffraction. (100)-oriented Co and Ni single-crystals with metastable bcc structure are formed in the early stage of film growth, where the metastable structure is stabilized through hetero-epitaxial growth. With increasing the thickness up to 2 nm, the Co and the Ni films start to transform into more stable hcp and fcc structures through atomic displacements parallel to bcc(110) slide planes, respectively. The stability of bcc phase is improved by adding a small volume of Fe atoms into a Co film. The critical thickness of bcc phase formation is thicker than 10 nm for Co{sub 100−x}Fe{sub x} films with x ≥ 10. On the contrary, the stability of bcc phase for Ni-Fe system is less than that for Co-Fe system. The critical thicknesses for Ni{sub 100−y}Fe{sub y} films with y = 20, 40, and 60 are 1, 3, and 5 nm, respectively. The Co{sub 100−x}Fe{sub x} single-crystal films with metastable bcc structure formed on GaAs(100) substrates show in-plane uniaxial magnetic anisotropies with the easy direction along GaAs[011], similar to the case of Fe film epitaxially grown on GaAs(100) substrate. A Co{sub 100−x}Fe{sub x} film with higher Fe content shows a higher saturation magnetization and a lower coercivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band offsets of TiZnSnO/Si heterojunction determined by x-ray photoelectron spectroscopy

X-ray photoelectron spectroscopy (XPS) was utilized to measure the valence band offset (ΔE{sub V}) of the TiZnSnO (TZTO)/Si heterojunction. TZTO films were deposited on Si (100) substrates using magnetron sputtering at room temperature. By using the Zn 2p{sub 3/2} and Sn 3d{sub 5/2} energy levels as references, the value of ΔE{sub V} was calculated to be 2.69 ± 0.1 eV. Combining with the experimental optical energy band gap of 3.98 eV for TZTO extracted from the UV-vis transmittance spectrum, the conduction band offset (ΔE{sub C}) was deduced to be 0.17 ± 0.1 eV at the interface. Hence, the energy band alignment of the heterojunction was determined accurately, showing a type-I form. This will be beneficial for the design and application of TZTO/Si hybrid devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characteristics of Hydrogen Sensors Based on Thin Tin Dioxide Films Modified with Platinum, Palladium, Silver, and Yttrium

The dependence of the characteristics of hydrogen sensors based on thin Pt/Pd/SnO{sub 2}:Sb, Ag, Y and Ag/SnO{sub 2}:Sb, Ag, Y films obtained by the method of magnetron sputtering at a direct current on the humidity level of the gas mixture during operation in thermal cyclic mode is investigated. The analysis of the experimental data was carried out using the expressions obtained on the basis of the dissociative adsorption model of hydrogen and water molecules on the SnO{sub 2} surface, taking into account the presence of three types of adsorbed particles: O{sup –}, OH, OН{sup –}. The use of complex modifiers Pt/Pd, Ag on the surface and Ag + Y in the bulk of tin dioxide films allows to reduce the influence of humidity on the characteristics of sensors. The role of these modifying additives in the process of dissociative adsorption of hydrogen molecules on the surface of SnO{sub 2} films in humid environment is established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel plasma immersion ion implantation and deposition hardware and technique based on high power pulsed magnetron discharge

A novel plasma immersion ion implantation technique based on high power pulsed magnetron sputtering (HPPMS) discharge that can produce a high density metal plasma is described. The metal plasma is clean and does not suffer from contamination from macroparticles, and the process can be readily scaled up for industrial production. The hardware, working principle, and operation modes are described. A matching circuit is developed to modulate the high-voltage and HPPMS pulses to enable operation under different modes such as simultaneous implantation and deposition, pure implantation, and selective implantation. To demonstrate the efficacy of the system and technique, CrN films with a smooth and dense surface without macroparticles were produced. An excellent adhesion with a critical load of 59.9 N is achieved for the pure implantation mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of breakdown voltage of indium-gallium-zinc-oxide-based Schottky diode

In contrast to the intensive studies on thin-film transistors based on indium gallium zinc oxide (IGZO), the research on IGZO-based diodes is still very limited, particularly on their behavior and stability under high bias voltages. Our experiments reveal a sensitive dependence of the breakdown voltage of IGZO Schottky diodes on the anode metal and the IGZO film thickness. Devices with an Au anode are found to breakdown easily at a reverse bias as low as −2.5 V, while the devices with a Pd anode and a 200-nm, fully depleted IGZO layer have survived up to −15 V. All diodes are fabricated by radio-frequency magnetron sputtering at room temperature without any thermal treatment, yet showing an ideality factor as low as 1.14, showing the possibility of achieving high-performance Schottky diodes on flexible plastic substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of homologous In{sub 2}O{sub 3}(ZnO){sub m} thin films and its thermoelectric properties

Homologous In{sub 2}O{sub 3}(ZnO){sub 5} thin films were produced on a synthetic quartz glass substrate by thermal annealing of magnetron sputtered In{sub 2}O{sub 3}-ZnO compound films. When the annealing temperature was increased to 700 °C, the sputtered In{sub 2}O{sub 3}-ZnO film with In{sub 2}O{sub 3} microcrystalline changed to a c-oriented homologous In{sub 2}O{sub 3}(ZnO){sub 5} structure, for which the crystallization is suggested to begin from the surface and proceed along with the film thickness. The annealing temperature of 700 °C to form the In{sub 2}O{sub 3}(ZnO){sub 5} structure was substantially lower than temperatures of conventional solid state synthesis from In{sub 2}O{sub 3} and ZnO powders, which is attributed to the rapid diffusional transport of In and Zn due to the mixing of In{sub 2}O{sub 3} and ZnO in the atomic level for sputtered In{sub 2}O{sub 3}-ZnO compound films. The homologous structure collapsed at temperatures above 900 °C, which is attributed to (1) zinc vaporization from the surface and (2) a gradual increase of zinc silicate phase at the interface. This c-oriented layer structure of homologous In{sub 2}O{sub 3}(ZnO){sub 5} thin films along the film thickness allowed the thin film to reach a power factor of 1.3 × 10{sup −4} W/m K{sup 2} at 670 °C, which is comparable with the reported maximum value for the textured In{sub 2}O{sub 3}(ZnO){sub 5} powder (about 1.6 × 10{sup −4} W/m K{sup 2} at 650 °C).

36 MATERIALS SCIENCE↗

Effect of temperature on the current (capacitance and conductance)–voltage characteristics of Ti/n-GaAs diode

In this study, Ti/n-GaAs Schottky barrier diode has been fabricated by DC magnetron sputtering. The current–voltage, capacitance–voltage, and conductance–voltage characteristics of Ti/n–GaAs diode have been investigated in the temperature range of 80–320 K. The ideality factor and barrier height values have been calculated from the forward current–voltage characteristics. The variation of the diode parameters with the sample temperature has been attributed to the presence of the lateral inhomogeneities of the barrier height. The temperature dependent capacitance–voltage characteristics have been measured to calculate the carrier concentration, diffusion potential, barrier height, and temperature coefficient of the barrier height (α = −0.65 meV K{sup −1}). The fact that the temperature coefficient of the barrier height changes from metal to metal has been ascribed to the chemical nature of the contact metal or metal electronegativity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗