Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Transparent conductive and near-infrared reflective Ga-doped ZnO/Cu bilayer films grown at room temperature

Bilayer films consisting of Ga-doped ZnO (GZO) and Cu layers were grown at room temperature by magnetron sputtering. The structural, electrical, and optical properties of GZO/Cu bilayer films were investigated in detail. The crystallinity and transparent-conductive properties of the films were correlated with the Cu layer thickness. The GZO/Cu bilayer film with the Cu layer thickness of 7.8 nm exhibited a low resistivity of 7.6x10{sup -5} {Omega} cm and an average visible transmittance of 74%. The reflectance was up to 65% in the near-infrared region for this film. The transparent conductive and near-infrared reflective GZO/Cu bilayer films could be readily deposited at room temperature. The GZO/Cu bilayer films were thermally stable when annealed at temperatures as high as 500 deg. C.

36 MATERIALS SCIENCE↗

Use of double-layer ITO films in reflective contacts for blue and near-UV LEDs

The structural and optical properties of multilayer ITO/SiO{sub 2}/Ag composites are studied. In these composites, the ITO (indium-tin oxide) layer is produced by two different methods: electron-beam evaporation and a combined method including electron-beam evaporation and subsequent magnetron sputtering. It is shown that the reflectance of the composite based on the ITO film produced by electron-beam evaporation is substantially lower. This can be attributed to the strong absorption of light at both boundaries of the SiO{sub 2} layer, which results from the complex surface profile of ITO films deposited by electron-beam evaporation. Samples with a film deposited by the combined method have a reflectance of about 90% at normal light incidence, which, combined with their higher electrical conductivity, makes these samples advantageous for use as reflective contacts to the p-type region of AlInGaN light-emitting diodes of the flip-chip design.

36 MATERIALS SCIENCE↗

Atomistic surface erosion and thin film growth modelled over realistic time scales

We present results of atomistic modelling of surface growth and sputtering using a multi-time scale molecular dynamics-on-the-fly kinetic Monte Carlo scheme which allows simulations to be carried out over realistic experimental times. The method uses molecular dynamics to model the fast processes and then calculates the diffusion barriers for the slow processes on-the-fly, without any preconceptions about what transitions might occur. The method is applied to the growth of metal and oxide materials at impact energies typical for both vapour deposition and magnetron sputtering. The method can be used to explain growth processes, such as the filling of vacancies and the formation of stacking faults. By tuning the variable experimental parameters on the computer, a parameter set for optimum crystalline growth can be determined. The method can also be used to model sputtering where the particle interactions with the surface occur at a higher energy. It is shown how a steady state can arise in which interstitial clusters are continuously being formed below the surface during an atom impact event which also recombine or diffuse to the surface between impact events. For fcc metals the near surface region remains basically crystalline during the erosion process with a pitted topography which soon attains a steady state roughness.

36 MATERIALS SCIENCE↗

Performance, structure, and stability of SiC/Al multilayer films for extreme ultraviolet applications

We report on the performance, structure and stability of periodic multilayer films containing silicon carbide (SiC) and aluminum (Al) layers designed for use as reflective coatings in the extreme ultraviolet (EUV). We find that SiC/Al multilayers prepared by magnetron sputtering have low stress, good temporal and thermal stability, and provide good performance in the EUV, particularly for applications requiring a narrow spectral bandpass, such as monochromatic solar imaging. Transmission electron microscopy reveals amorphous SiC layers and polycrystalline Al layers having a strong <111> texture, and relatively large roughness associated with the Al crystallites. Fits to EUV reflectance measurements also indicate large interface widths, consistent with the electron microscopy results. SiC/Al multilayers deposited by reactive sputtering with nitrogen comprise Al layers that are nearly amorphous and considerably smoother than films deposited nonreactively, but no improvements in EUV reflectance were obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analytical model of electron transport in polycrystalline, degenerately doped ZnO films

An analytical description of the charge carrier transport, valid for non-degenerated and degenerated semiconductors, was developed, critically reviewed, and fitted to the temperature-dependent Hall mobility data of magnetron sputtered, degenerately doped ZnO:Al films. Our extended model for grain boundary scattering in semiconductors of arbitrary degeneracy is based on previous models from literature and suitable to describe the Hall mobility of the carriers as a function of the free carrier concentration and the temperature at the same time. It is mathematically simple enough for a fast fit procedure, which is not possible with most of the previous models. Applying a combined transport model consisting of ionized impurity scattering, phonon scattering, and grain boundary scattering in degenerate semiconductors, we were able to determine the trap density at the grain boundaries Nₜ ≈ 3×10¹³ to 5×10¹³cm⁻² and the deformation potential E{sub ac} in the range of 5 eV to 9 eV depending on the details of the transport model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlled Growth of Ta Oxide With Reactive Sputtering for Overlap Josephson Junction Application

Josephson junctions $\($JJs$\)$ are indispensable elements for superconducting quantum electronics. There is a growing need to develop processes for high quality JJs. Here we explore the growth of Ta oxide as a dielectric barrier for Metal-Oxide-Metal overlap JJ implementations. We study films of Ta oxides prepared with reactive magnetron sputtering. TaOx is grown on silicon and Ta films with varying RF power and oxygen concentrations. Tuning these parameters allows us to control the rate of deposition as well as composition of polycrystalline Ta oxides needed to meet our dielectric requirements for Josephson Junctions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Material of Metal Sublayer and Deposition Configuration on the Texture Formation in the Piezoactive ZnO Films

Effect of material of metal sublayer (aluminum, vanadium, chromium, iron, cobalt, nickel, and copper) and deposition configuration on the formation of the oblique and straight texture in the ZnO films is studied. The films that are synthesized in a dc magnetron sputtering system. It is shown that the piezoactive ZnO films with oblique texture that can generate shear waves are formed on the Cr and V metal sublayers in the shifted deposition configuration when the substrate is shifted relative to the magnetron axis toward the region of the target erosion. The piezoactive ZnO films with the straight structure that can generate longitudinal waves are formed on a chemically pure Al sublayer in the symmetric deposition configuration when the substrate is centered with respect to the target. Changes of the sublayer material in both deposition configurations or preliminary oxidation of the sublayer lead to the formation of the piezoactive ZnO films with mixed texture that excite shear and longitudinal waves. Chemical etching is used to show that the ZnO films with the oblique and straight textures exhibit piezoactive properties and can generate hypersound at thicknesses of no less than about 0.3 and about 0.9 μm, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting properties and chemical composition of NbTiN thin films with different thickness

In this research, we systematically investigated the superconducting properties and chemical composition of NbTiN thin films prepared on single-crystal MgO substrates. The NbTiN thin films with different thicknesses (4–100 nm) were deposited by reactive DC magnetron sputtering at ambient temperature. We measured and analyzed the crystal structure and thickness dependence of the chemical composition using X-ray diffraction and X-ray photoelectron spectroscopy depth profiles. The films exhibited excellent superconducting properties, with a high superconducting critical temperature of 10.1 K, low resistivity (ρ{sub 20} = 93 μΩ cm), and residual resistivity ratio of 1.12 achieved for 4-nm-thick ultrathin NbTiN films prepared at the deposition current of 2.4 A. The stoichiometry and electrical properties of the films varied gradually between the initial and upper layers. A minimum ρ{sub 20} of 78 μΩ cm and a maximum residual resistivity ratio of 1.15 were observed for 12-nm-thick films, which significantly differ from the properties of NbN films with the same NaCl structure.

36 MATERIALS SCIENCE↗

Comparison of Mg-based multilayers for solar He II radiation at 30.4 nm wavelength

Mg-based multilayers, including SiC/Mg, Co/Mg, B4C/Mg, and Si/Mg, are investigated for solar imaging and a He II calibration lamp at a 30.4 nm wavelength. These multilayers were fabricated by a magnetron sputtering method and characterized by x-ray reflection. The reflectivities of these multilayers were measured by synchrotron radiation. Near-normal-incidence reflectivities of Co/Mg and SiC/Mg multilayer mirrors are as high as 40.3% and 44.6%, respectively, while those of B4C/Mg and Si/Mg mirrors are too low for application. The measured results suggest that SiC/Mg, Co/Mg multilayers are promising for a 30.4 nm wavelength.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influences of defects evolvement on the properties of sputtering deposited ZnO:Al films upon hydrogen annealing

Understanding how the defects interact with each other and affect the properties of ZnO:Al films is very important for improving their performance as a transparent conductive oxide (TCO). In the present work, we studied the effects of hydrogen annealing on the structural, optical and electrical properties of ZnO:Al films prepared by magnetron sputtering. High resolution transmission electron microscopy observations reveal that annealing at ∼300 {sup o}C induces the formation of partial dislocations (PD) and stacking faults (SF), which disrupt the lattice periodicity leading to decreased grain size. Annealing at temperatures above ∼500 {sup o}C can remove the PD and SF, but large number of zinc vacancies will be generated. Our results show that when films are annealed at ∼500 {sup o}C, the oxygen-related defects (interstitials O{sub i}, etc.) in the as-grown films can be remarkably removed or converted, which lead to increments in the carrier concentration, mobility, and the transmittance in the visible range. At annealing temperatures above 550 {sup o}C, the hydrogen etching effect becomes predominant, and Al donors are deactivated by zinc vacancies. We also find an abnormal endothermic process by thermal analysis and an abnormal increase in the resistivity during heating the sample under hydrogen atmosphere, based on which the interaction of O{sub i} with the defects (mainly Al donors and PD) is discussed. It is also demonstrated that by annealing the as-grown AZO films at ∼500 {sup o}C under hydrogen atmosphere, high performance TCO films with a low resistivity of 4.48 × 10{sup −4} Ωcm and high transmittance of above 90% in the visible light are obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Circular multilayer zone plate for high-energy x-ray nano-imaging

A circular multilayer zone plate (MZP) was fabricated and its focusing performance was evaluated using 20-keV x-rays. MoSi{sub 2} and Si layers were alternately deposited by DC magnetron sputtering on a wire core; all the interfaces satisfied the Fresnel zone condition. The measured line spread function was converted to a point spread function by tomographic reconstruction. The results suggest that the MZP has the potential to realize the diffraction-limited resolving power, which is calculated to be 35 nm using the diffraction integral. Furthermore, scanning transmission microscopy using the MZP could resolve a 50-nm line-and-space pattern.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Epitaxial V{sub 0.6}W{sub 0.4}N/MgO(001): Evidence for ordering on the cation sublattice

V{sub 0.6}W{sub 0.4}N alloys are grown on MgO(001) by ultrahigh vacuum reactive magnetron sputtering from V and W targets in 10 mTorr pure-N{sub 2} atmospheres at temperatures T{sub s} ranging from 600 to 900 Degree-Sign C. Based on x-ray diffraction and transmission electron microscopy results, all films have the B1-NaCl crystal structure and grow with a cube-on-cube epitaxial relationship to the substrate, (001){sub VWN} Double-Vertical-Line (001){sub MgO} and [100]{sub VWN} Double-Vertical-Line [100]{sub MgO}. Rutherford backscattering spectrometry analyses show that the N content in V{sub 0.6}W{sub 0.4}N{sub x} alloys decreases with increasing T{sub s} from overstoichiometric with x = 1.13 at 600 Degree-Sign C, to approximately stoichiometric with x = 1.08 at 700 Degree-Sign C, to understoichiometric at 800 Degree-Sign C (x = 0.80) and 900 Degree-Sign C (x = 0.75). High-resolution scanning transmission electron microscopy, Z-contrast, and selected-area electron diffraction investigations of V{sub 0.6}W{sub 0.4}N(001) alloys grown at 600 and 700 Degree-Sign C reveal the onset of W ordering on adjacent 111 planes of the metal sublattice; no ordering is observed for understoichiometric films grown at higher temperatures.

36 MATERIALS SCIENCE↗

Orientation-dependent piezoelectric properties in lead-free epitaxial 0.5BaZr{sub 0.2}Ti{sub 0.8}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} thin films

Orientation-engineered 0.5BaZr{sub 0.2}Ti{sub 0.8}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} (BZT-BCT) thin films were deposited on La{sub 0.7}Sr{sub 0.3}MnO{sub 3}-coated SrTiO{sub 3} single-crystalline (001), (110), and (111) substrates by off-axis radio-frequency magnetron sputtering. X-ray diffraction confirmed a highly epitaxial growth of all the as-deposited films. It is believed the strong orientation dependence of ferroelectric and piezoelectric properties on the films is attributed to the relative alignment of crystallites and spontaneous polarization vector. The optimal ferroelectric response lies in the [001] direction, whereas a comparatively large effective piezoelectric coefficient d{sub 33,eff} of 100.1 ± 5 pm/V was attained in [111] BZT-BCT thin film, suggesting its potential application for high-performance lead-free piezoelectric devices.

36 MATERIALS SCIENCE↗

Formation of conductive copper lines by femtosecond laser irradiation of copper nitride film on plastic substrates

In this paper, we report a simple method to form conductive copper lines by scanning a single-beam femtosecond pulse laser on a plastic substrate covered with copper nitride (Cu{sub 3}N) film. The Cu{sub 3}N films were prepared by DC magnetron sputtering in the presence of an Ar + N{sub 2} atmosphere at 100 °C. The influence of the laser power and scanning speed on the formed copper line width, surface features, and morphology was analyzed by means of optical microscopy, X-ray diffraction, non-contact 3D profilometer, and scanning electron microscopy. The experimental results demonstrate that low laser power and low scanning speed favor the formation of uniform and flat Cu lines. After process optimization, copper lines with a width less than 5 μm were obtained, which provides an attractive application prospect in the field of flexible electronic devices.

36 MATERIALS SCIENCE↗

High density flux of Co nanoparticles produced by a simple gas aggregation apparatus

Gas aggregation is a well known method used to produce clusters of different materials with good size control, reduced dispersion, and precise stoichiometry. The cost of these systems is relatively high and they are generally dedicated apparatuses. Furthermore, the usual sample production speed of these systems is not as fast as physical vapor deposition devices posing a problem when thick samples are needed. In this paper we describe the development of a multipurpose gas aggregation system constructed as an adaptation to a magnetron sputtering system. The cost of this adaptation is negligible and its installation and operation are both remarkably simple. The gas flow for flux in the range of 60-130 SCCM (SCCM denotes cubic centimeter per minute at STP) is able to completely collimate all the sputtered material, producing spherical nanoparticles. Co nanoparticles were produced and characterized using electron microscopy techniques and Rutherford back-scattering analysis. The size of the particles is around 10 nm with around 75 nm/min of deposition rate at the center of a Gaussian profile nanoparticle beam.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-temperature vapour-liquid-solid (VLS) growth of vertically aligned silicon oxide nanowires using concurrent ion bombardment.

Vertically aligned silicon oxide nanowires can be synthesized over a large area by a low-temperature, ion-enhanced, reactive vapour-liquid-solid (VLS) method. Synthesis of these randomly ordered arrays begins with a thin indium film deposited on a Si or SiO{sub 2} surface. At the processing temperature of 190 C, the indium film becomes a self-organized seed layer of molten droplets, receiving atomic silicon from a DC magnetron sputtering source rather than from the gaseous precursors used in conventional VLS growth. Simultaneous vigorous ion bombardment aligns the objects vertically and expedites mixing of oxygen and silicon into the indium. Silicon oxide precipitates from each droplet in the form of multiple thin strands having diameters as small as 5 nm. These strands form a single loose bundle growing normal to the surface, eventually consolidating to form one nanowire. The vertical rate of growth can reach 300 nm min{sup -1} in an environment containing argon, hydrogen, and traces of water vapour. This paper discusses the physical and chemical factors leading to the formation of the nanostructures. It also demonstrates how the shape of the resulting nanostructures can be further controlled by sputtering, during both VLS growth and post-VLS processing. Key technological advantages of the developed process are nanowire growth at low substrate temperatures and the ability to form aligned nanostructure arrays, without the use of lithography or templates, on any substrate onto which a thin silicon film can be deposited.

08 HYDROGEN↗

Scalable synthesis of layer-controlled WS{sub 2} and MoS{sub 2} sheets by sulfurization of thin metal films

Transition metal dichalcogenides (TMDs) have emerged as exciting 2D materials beyond graphene due to their promising applications in the field of electronics and optoelectronics. Hence, the ability to produce controllable and uniformly thick TMD sheets over a large area is of utmost important for large-scale applications. Here, a facile method of synthesizing large-area, layer-controlled WS{sub 2}, and MoS{sub 2} sheets by sulfurization of their corresponding thin metal films is reported. A metal film, which is deposited by magnetron sputtering method, can be adjusted to produce, with great control, the desired sheet thickness down to a monolayer. Various characterization techniques, such as Raman, photoluminescence, and transmission electron microscopy, were used to evaluate the grown films. The results confirmed some of the exotic properties of TMDs such as the thickness dependent band-gap transition (indirect to direct band gap) and Raman shift. Devices made directly on the as-grown film showed modest mobility, ranging from 0.005 to 0.01 cm{sup 2} V{sup −1}s{sup −1}. Our synthesis method is simple and could also be used to synthesize other TMDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-throughput multimodal exploration of a nanocrystalline Cu-Ag library

Sputter-deposited, nanocrystalline Cu-Ag thin films produced across a broad compositional and deposition-parameter space were evaluated to unravel the process-structure-property relationships important for creating hard, conductive electrical contacts and coatings. Combinatorial deposition involving pulsed direct current magnetron sputtering of elemental targets enabled swift examination of nearly the full range of alloy compositions and a relevant portion of deposition atomistics. Several high-throughput characterization modalities were employed to evaluate the chemistry, structure, and properties of the films. The resultant hardness, modulus, film density, crystal texture, and resistivity were analyzed in terms of key deposition characteristics (incident atom kinetic energy and incidence angle) predicted by binary-collision, kinematic Monte Carlo simulations. The study revealed improved hardness, parabolic resistivity dependence on composition, and compositional and process dependencies of film tarnishing. The results are discussed in the context of variations in microstructure and film density. Transmission electron microscopy and X-ray diffraction demonstrate several forms of compositional variation including solute segregation to grain boundaries as well as periodic, intragranular compositional modulations. Annealing of a Cu-rich alloy film exhibiting grain boundary segregation showed that this as-deposited, compositional variation is not stable above 100 °C. Finally, the Cu-Ag system is shown to have potential for hard, conductive, tarnish-resistant and room temperature-stable nanocrystalline thin films across the composition space.

36 MATERIALS SCIENCE↗