Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nested”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Resistive stability of cylindrical MHD equilibria with radially localized pressure gradients

As a step toward understanding 3D magnetohydrodynamic (MHD) equilibria, for which smooth solutions may not exist, we develop a simple cylindrical model to investigate the resistive stability of MHD equilibria with alternating regions of constant and nonuniform pressure, producing states with continuous total pressure (i.e., no singular current sheets) but discontinuities in the parallel current density. We examine how the resistive stability characteristics of the model change as we increase the localization of pressure gradients at fixed radii, which approaches a discontinuous pressure profile in the zero-width limit. Equilibria with continuous pressure are found to be unstable to moderate/high-m modes and apparently tend toward ideal instability in some cases. We propose that additional geometric degrees of freedom or symmetry breaking via island formation may increase the parameter space on which equilibria of our model are physically realizable, while preserving the radial localization of pressure gradients. This is consistent with the possibility of realizing, in practice, 3D MHD equilibria which support both continuously nested flux surfaces (where ∇p ≠ 0) and chaotic field regions (where ∇p = 0)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First experiments on Revolver shell collisions at the OMEGA laser

The results of recent experiments on the OMEGA laser are presented, demonstrating the ablator-driver shell collision relevant to the outer two shells of the Revolver triple-shell inertial-confinement-fusion concept [K. Molvig et al., Phys. Rev. Lett. 116, 255003 (2016)]. These nested two-shell experiments measured the pre and postcollision outer-surface trajectory of the 7.19 g/cc chromium inner shell. Measurements of the shell trajectory are in excellent agreement with simulations; the measured outer-surface velocity was 7.52 ± 0.59 cm/μs compared to the simulated value of 7.27 cm/μs. Agreement between the measurements and simulations provides confidence in our ability to model collisions with features which have not been validated previously. Notable features include the absence of ~40 mg/cc foam between shells commonly used in double shell experiments, a dense (7.19 g/cc) inner shell representative of the densities to be used at full scale, approximately mass matched ablator payload and inner shells, and the inclusion of a tamping-layer-like cushion layer for the express purpose of reducing the transfer of high mode growth to the driver shell and mediation of the shell collision. These experiments test the modeling of the radiative heating, expansion, recompression, and acceleration of the chromium inner shell. Agreement of experimental measurements with simulation improves our confidence in the models used to design the Revolver ignition target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Air-transfer production method for large-area picosecond photodetectors

We have designed and prototyped the process steps for the batch production of large-area micro-channel-plate photomultipliers (MCPPMT) using the “air-transfer” assembly process developed with single LAPPD TM modules. Results are presented addressing the challenges of designing a robust package that can transmit large numbers of electrical signals for pad or strip readout from inside the vacuum tube and of hermetically sealing the large-perimeter window–body interface. We have also synthesized a photocathode in a large-area low-aspect-ratio volume and have shown that the micro-channel plates recover their functionality after cathode synthesis. These steps inform a design for a multi-module batch facility employing dual nested low-vacuum and ultra-high-vacuum systems in a small-footprint. The facility design provides full access to multiple MCP-PMT modules prior to hermetic pinch-off for leak-checking and real-time photocathode optimization.

47 OTHER INSTRUMENTATION↗

DESC: A stellarator equilibrium solver

In this paper, the new code DESC is presented to solve for fixed-boundary ideal magnetohydrodynamic equilibria in stellarators. The approach directly solves the equilibrium force balance as a system of nonlinear equations in the form f(x) = 0. The independent variables x represent nested magnetic flux surfaces expressed in the inverse representation with toroidal flux coordinates, and the equations f(x) quantify equilibrium force balance errors at discrete points in real space. Discretizing with global Fourier–Zernike basis functions properly treats the magnetic axis and minimizes the number of coefficients needed to describe the flux surfaces. The pseudospectral method provides great flexibility in where the errors are evaluated, and the system of equations is efficiently solved with a Newton–Raphson iteration. Equilibria are computed and compared against VMEC for both axisymmetric and non-axisymmetric examples. The results show fast convergence rates and solutions with low errors throughout the plasma volume.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evidence of E × B staircase in HL-2A L-mode tokamak discharges

Theory and simulation suggest the existence of an E ×B staircase in the plasma core consisting of a series of nested m/n = 0/0 E×B shear layers that regulate turbulent transport across the layers together with mesoscale transport events occurring between them. Here, we show evidence for these phenomena in HL-2A L-mode discharges. Both high resolution electron cyclotron emission Te profiles and frequency modulated continuous wave reflectometer ne profiles show multiple gradient corrugations. The analysis of simultaneous poloidally and radially separated beam emission spectroscopy turbulent density fluctuation measurements over most of the minor radius of the plasma provides the evidence of eddy tilting and propagation direction reversals largely coincident with the profile corrugations, with long-range transport events occurring between these locations. The results provide significant additional evidence for the existence of an E × B staircase that influences particle and heat transport in L-mode discharges.

Liu, Wenbin (ORCID:0000000310424117)↗

A co-axial electron gun to generate millimeter-wave RF using the two-stream instability

A novel source for broadband millimeter-wave RF is being designed at Los Alamos National Laboratory utilizing the two-stream instability. This RF source offers the potential for consistent output power over a large bandwidth on a single device. The source is designed to use two co-axial electron beams coupled into solenoidal magnetic fields. This is accomplished using two cathodes independently modulated nested in each other. The electron beam energy from the innermost cathode will fall in the range between 15 and 20 keV with the beam energy from the outer cathode being 75%–95% of the inner beam energy. In order to efficiently match the beam from the outer cathode into the solenoidal magnetic field, shields are used around the cathodes to shape the electric field in the gun region to extend the electrostatic focal length of the beams for better coupling into the magnetic field. As a result, we present the design of electron guns and expected performance using Trak simulations.

47 OTHER INSTRUMENTATION↗

Generalized Boozer coordinates: A natural coordinate system for quasisymmetry

We prove the existence of a straight-field-line coordinate system we call generalized Boozer coordinates. This coordinate system exists for magnetic fields with nested toroidal flux surfaces provided ∮ d l / B   ( j · ∇ ψ ) = 0 , where symbols have their usual meaning, and the integral is taken along closed magnetic field lines. All quasisymmetric fields, regardless of their associated form of equilibria, must satisfy this condition. This coordinate system presents itself as a convenient form to describe general quasisymmetric configurations and their properties. Insight can be gained analytically into the difference between strong and weak forms of quasisymmetry, as well as axisymmetry, and the interaction of quasisymmetry with different forms of equilibria.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multiple electron beam generation with different energies and comparable currents from a single cathode potential for high power traveling wave tubes (TWTs)

We present a technique for generating multiple electron beams with different energies and comparable currents from a single cathode stalk at a single potential using nested magnetically insulated coaxial diodes (MICDs). The application is for a multi-stream traveling wave tube. Particle-in-cell simulations are performed for an experimental parameter-based geometry where two thin-walled intense relativistic electron beams immersed in a strong uniform magnetic field propagate through a cylindrical vacuum channel. The analytically derived results are obtained by extending Fedosov’s solution for generating a hollow electron beam from an MICD on a cathode stalk in an infinite magnetic field. Two electron beams are generated and accelerated downstream assuming zero initial kinetic energy of the electrons from the cathodes. Results show both electron beam currents ranging from 66 to 2.8 kA with an energy difference ranging from 6% to 27% depending on voltages applied from 100 to 600 kV and the geometry of the two MICDs. An optimal geometry is a crucial factor in achieving the maximum energy difference between the electron beams for comparable currents. The analytical and numerical simulation results show good agreement. We are currently in the process of planning experiments using the electron beam accelerator (SINUS-6 at UNM) to validate the analytical and simulation results.

Islam, K. N. (ORCID:0000000214397710)↗

Rank-reduced coupled-cluster. III. Tensor hypercontraction of the doubles amplitudes

In this work, we develop a quartic-scaling implementation of coupled-cluster singles and doubles (CCSD) based on low-rank tensor hypercontraction (THC) factorizations of both the electron repulsion integrals (ERIs) and the doubles amplitudes. This extends our rank-reduced (RR) coupled-cluster method to incorporate higher-order tensor factorizations. The THC factorization of the doubles amplitudes accounts for most of the gain in computational efficiency as it is sufficient, in conjunction with a Cholesky decomposition of the ERIs, to reduce the computational complexity of most contributions to the CCSD amplitude equations. Further THC factorization of the ERIs reduces the complexity of certain terms arising from nested commutators between the doubles excitation operator and the two-electron operator. We implement this new algorithm using graphical processing units and demonstrate that it enables CCSD calculations for molecules with 250 atoms and 2500 basis functions using a single computer node. Furthermore, we show that the new method computes correlation energies with comparable accuracy to the underlying RR-CCSD method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fused x-ray and fast neutron CT reconstruction for imaging large and dense objects

Megavolt x-ray computed tomography (CT) is a powerful tool for three-dimensional characterization. However, its utility is limited for large objects composed of high-atomic number (Z) materials, where x rays fail to penetrate. Information from fast neutron CT (FNCT) can complement x-ray CT reconstructions since fast neutrons can more readily penetrate high-Z objects. In this work, we demonstrate a method for combining FNCT and x-ray CT data to create a single reconstruction, more accurate than could be achieved with either x rays or fast neutrons alone. The algorithm was tested on an exemplar comprising multiple concentric, nested cylinders of different materials. Simulated and empirical x-ray CT data were acquired for the exemplar using a 9 MV bremsstrahlung spectrum. Additional simulated and empirical FNCT data were acquired using an accelerator based fast neutron source. The FNCT data were used to synthesize x-ray CT data and augment the x-ray CT data missing due to lack of penetration. This approach mitigates artifacts that would otherwise negatively affect the accuracy and resolution of a single-modality reconstructed volume.

47 OTHER INSTRUMENTATION↗

A model for K-shell x-ray yield from magnetic implosions at Sandia's Z machine

A zero-dimensional magnetic implosion model with a coupled equivalent circuit for the description of an imploding nested wire array or gas puff is presented. Circuit model results have been compared with data from imploding stainless steel wire arrays, and good agreement has been found. The total energy coupled to the load, Ej×B, has been applied to a simple semi-analytic K-shell yield model, and excellent agreement with previously reported K-shell yields across all wire array and gas puff platforms is seen. Trade space studies in implosion radius and mass have found that most platforms operate near the predicted maximum yield. In some cases, the K-shell yield may be increased by increasing the mass or radius of the imploding array or gas puff.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

General guide concepts for compact, high-brilliance neutron moderators

The trend in neutron sciences is toward integrating compact, high-brightness moderators into new or upgraded facilities. Transporting neutrons from the source to the sample position with a phase-space distribution tailored to specific requirements is crucial to leverage high source brilliance. Here we have investigated four guide concepts using Monte Carlo ray tracing simulations: Montel beamline with nested Kirkpatrick–Baez mirrors, curved-tapered beamline with a bender and straight sections, straight-elliptical beamline, and curved-elliptical beamline. The straight-elliptical (curved-elliptical) beamline features two half-ellipse guides connected by a straight (non-straight) guide section. The neutron transport efficiency and phase space homogeneity have been quantitatively compared. Our results show that the straight-elliptical beamline performs best because of few neutron bounces on the guide surface with small reflection angles, minimizing flux loss. The Montel beamline provides the best spatial confinement of neutrons within the desired region; however, there is a high thermal-neutron loss due to large reflection angles. The curved-tapered beamline suffers from significant flux loss due to high bounces, and it shows a non-uniform angular distribution related to broad ranges of bounces and reflection angles. The non-straight guide section of the curved-elliptical beamline increases the phase space inhomogeneity, leading to a spatially non-uniform beam profile. The results apply to general neutron instruments that require transporting thermal and cold neutrons from a compact, high-brilliance moderator to the sample location with a moderate phase-space volume.

47 OTHER INSTRUMENTATION↗

Surface dependence of electronic growth of Cu(111) on MoS 2

Scanning tunneling microscopy shows that copper deposited at room temperature onto a freshly exfoliated MoS 2 surface forms Cu(111) clusters with periodic preferred heights of 5, 8, and 11 atomic layers. These height intervals correlate with Fermi nesting regions along the necks of the bulk Cu Fermi surface, indicating a connection between physical and electronic structures. Density functional theory calculations of freestanding Cu(111) films support this as well, predicting a lower density of states at the Fermi level for these preferred heights. This is consistent with other noble metals deposited on MoS 2 that exhibit electronic growth, in which the metal films self-assemble as nanostructures minimizing quantum electronic energies. Here, we have discovered that it is critical for the metal deposition to begin on a clean MoS 2 surface. If copper is deposited onto an already Cu coated surface, even if the original film displays electronic growth, the resulting Cu film lacks quantization. Instead, the preferred heights of the Cu clusters simply increase linearly with the amount of Cu deposited upon the surface. We believe this is due to different bonding conditions during the initial stages of growth. Newly deposited copper would bond strongly to the already present copper clusters, rather than the weak bonding, which exists to the van der Waals terminated surface of MoS 2 . The stronger bonding with previously deposited clusters hinders additional Cu atoms from reaching their lowest quantum energy state. The interface characteristics of the van der Waals surface enable surface engineering of self-assembled structures to achieve different applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermally frustrated phase transition at high pressure in B 2-ordered FeV

X-ray diffraction measurements of equiatomic B2-ordered FeV were performed in a diamond-anvil cell at room temperature at several pressure points up to 80 GPa that showed the cubic phase to be stable with no indication of structural phase transitions. Density functional theory at 0 K predicts Fermi surface nesting, an electronic topological transition, and a phonon dynamical instability within the experimentally investigated pressure range. Nevertheless, the instability is absent in phonon dispersion curves extracted from ab initio molecular dynamics simulations below the critical volume at temperatures as low as 10 K, indicating that thermal atomic displacements can frustrate the phase transition by renormalizing the phonon dispersion curves. Ferrimagnetism is critical for the stability of the cubic phase at low temperature, but thermal atomic displacements are enough to support the structure at and above the Néel temperature.

36 MATERIALS SCIENCE↗

Efficient analysis of magnetic field line behavior in toroidal plasmas

The confinement of plasmas in tokamaks and stellarators depends on magnetic field lines lying in nested toroidal surfaces. The transition near the plasma edge away from the lines lying in magnetic surfaces defines properties of divertors. The transition in time defines properties of disruptions. Divertor design and disruption analyses require a detailed understanding of these transitions. The use of a Fourier transform coupled with a Gaussian window function allows far more information to be extracted about these transitions using far shorter field line integrations than can be obtained using traditional methods based on Poincaré plots. The physics of divertors and disruptions is reviewed to clarify why the type of information that can be gained from more efficient methods of analysis is of central importance to the fusion program based on magnetic confinement.

Boozer, Allen H. [Columbia Univ., New York, NY (Un↗

Hollow-core revolver fibre with a double-capillary reflective cladding

We report the fabrication of the first hollow-core revolver fibre with a core diameter as small as 25 μm and an optical loss no higher than 75 dB km{sup -1} at a wavelength of 1850 nm. The decrease in core diameter, with no significant increase in optical loss, is due to the use of double nested capillaries in the reflective cladding design. A number of technical problems pertaining to the fabrication of such fibres are resolved. (fiber optics)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Control of atomic Bose – Einstein condensate with interferometric feedback probing

We consider the problem of decoherence in a Bose – Einstein condensate (BEC) of noninteracting atoms during interferometric probing with a classical monochromatic external field. The condensate is located in one of the arms of the Mach – Zehnder interferometer, while part of the radiation from the interferometer output is fed back to the input, thereby closing the coherent feedback loop. A more general setting of the problem is also considered, in which the condensate is located in a system of interferometers ‘nested’ into each other, while part of the output radiation of each of them is also fed back to its input, closing the so-called multiloop feedback. The possibility of effective control of decoherence rates of various matrix elements is shown. The application of feedback of the proposed type to BEC in a double-well potential is investigated. It is found that this feedback allows efficient control of the distribution of atoms between the wells. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structural analysis of a class III preQ 1 riboswitch reveals an aptamer distant from a ribosome-binding site regulated by fast dynamics

PreQ 1 -III riboswitches are newly identified RNA elements that control bacterial genes in response to preQ 1 (7-aminomethyl-7-deazaguanine), a precursor to the essential hypermodified tRNA base queuosine. Although numerous riboswitches fold as H-type or HL out -type pseudoknots that integrate ligand-binding and regulatory sequences within a single folded domain, the preQ 1 -III riboswitch aptamer forms a HL out -type pseudoknot that does not appear to incorporate its ribosome-binding site (RBS). To understand how this unusual organization confers function, in this paper we determined the crystal structure of the class III preQ 1 riboswitch from Faecalibacterium prausnitzii at 2.75 Å resolution. PreQ 1 binds tightly (K D,app 6.5 ± 0.5 nM) between helices P1 and P2 of a three-way helical junction wherein the third helix, P4, projects orthogonally from the ligand-binding pocket, exposing its stem-loop to base pair with the 3' RBS. Biochemical analysis, computational modeling, and single-molecule FRET imaging demonstrated that preQ 1 enhances P4 reorientation toward P1–P2, promoting a partially nested, H-type pseudoknot in which the RBS undergoes rapid docking (k dock ~0.6 s -1 ) and undocking (k undock ~1.1 s -1 ). Finally, discovery of such dynamic conformational switching provides insight into how a riboswitch with bipartite architecture uses dynamics to modulate expression platform accessibility, thus expanding the known repertoire of gene control strategies used by regulatory RNAs.

59 BASIC BIOLOGICAL SCIENCES↗