Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observational Networks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Advancing global change biology through experimental manipulations: Where have we been and where might we go?

Abstract This commentary summarizes the publication history of Global Change Biology for works on experimental manipulations over the past 25 years and highlights a number of key publications. The retrospective summary is then followed by some thoughts on the future of experimental work as it relates to mechanistic understanding and methodological needs. Experiments for elevated CO 2 atmospheres and anticipated warming scenarios which take us beyond historical analogs are suggested as future priorities. Disturbance is also highlighted as a key agent of global change. Because experiments are demanding of both personnel effort and limited fiscal resources, the allocation of experimental investments across Earth's biomes should be done in ecosystems of key importance. Uncertainty analysis and broad community consultation should be used to identify research questions and target biomes that will yield substantial gains in predictive confidence and societal relevance. A full range of methodological approaches covering small to large spatial scales will continue to be justified as a source of mechanistic understanding. Nevertheless, experiments operating at larger spatial scales encompassing organismal, edaphic, and environmental diversity of target ecosystems are favored, as they allow for the assessment of long‐term biogeochemical feedbacks enabling a full range of questions to be addressed. Such studies must also include adequate investment in measurements of key interacting variables (e.g., water and nutrient availability and budgets) to enable mechanistic understanding of responses and to interpret context dependency. Integration of ecosystem‐scale manipulations with focused process‐based manipulations, networks, and large‐scale observations will aid more complete understanding of ecosystem responses, context dependence, and the extrapolation of results. From the outset, these studies must be informed by and integrated with ecosystem models that provide quantitative predictions from their embedded mechanistic hypotheses. A true two‐way interaction between experiments and models will simultaneously increase the rate and robustness of Global Change research.

Hanson, Paul J.↗

Conductance with stochastic resonance in Mn{sub 12} redox network without tuning

Artificial neuron-based information processing is one of the attractive approaches of molecular-scale electronics, which can exploit the ability of molecular system for self-assembling or self-organization. The self-organized Mn{sub 12}/DNA redox network shows nonlinear current-voltage characteristics that can be described by the Coulomb blockade network model. As a demonstration of the nonlinear network system, we have observed stochastic resonance without tuning for weak periodic input signals and thermal noise, which suggests a route to neural network composed of molecular materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystalline Ceramic Waste Forms: Comparison Of Reference Process For Ceramic Waste Form Fabrication

The research conducted in this work package is aimed at taking advantage of the long term thermodynamic stability of crystalline ceramics to create more durable waste forms (as compared to high level waste glass) in order to reduce the reliance on engineered and natural barrier systems. Durable ceramic waste forms that incorporate a wide range of radionuclides have the potential to broaden the available disposal options and to lower the storage and disposal costs associated with advanced fuel cycles. Assemblages of several titanate phases have been successfully demonstrated to incorporate radioactive waste elements, and the multiphase nature of these materials allows them to accommodate variation in the waste composition. Recent work has shown that they can be produced from a melting and crystallization process. The objective of this report is to explore the phase formation and microstructural differences between lab scale melt processing in varying gas environments with alternative densification processes such as Hot Pressing (HP) and Spark Plasma Sintering (SPS). The waste stream used as the basis for the development and testing is a simulant derived from a combination of the projected Cs/Sr separated stream, the Trivalent Actinide - Lanthanide Separation by Phosphorous reagent Extraction from Aqueous Komplexes (TALSPEAK) waste stream consisting of lanthanide fission products, the transition metal fission product waste stream resulting from the transuranic extraction (TRUEX) process, and a high molybdenum concentration with relatively low noble metal concentrations. Melt processing as well as solid state sintering routes SPS and HP demonstrated the formation of the targeted phases; however differences in microstructure and elemental partitioning were observed. In SPS and HP samples, hollandite, pervoskite/pyrochlore, zirconolite, metallic alloy and TiO 2 and Al 2 O 3 were observed distributed in a network of fine grains with small residual pores. The titanate phases that incorporate M +3 rare earth elements were observed to be distinct phases (ex. Nd 2 Ti 2 O 7 with less degree of substitution as compared to the more homogeneous melt processed samples where a high degree of substitution and variation of composition within grains was observed. Liquid phase sintering was enhanced in reducing gas environments and resulted in large (10-200 microns) irregular shaped grains along with large voids associated with the melt process; SPS and HP samples exhibited finer grain size with smaller voids. Metallic alloys were observed in the bulk of the sample for SPS and HP samples, but were found at the bottom of the crucible in melt processed trials. These results indicate that for a first melter trial, the targeted phases can be formed in air by utilizing Ti/TiO 2 additives which aid phase formation and improve the electrical conductivity. Ultimately, a melter run in reducing gas environments would be beneficial to study differences in phase formation and elemental partitioning.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An Overview of NASA’s Newest Engineering Model, ORDEM 4.0

Since the mid-1990s, one of the most important products produced by the NASA Orbital Debris Program Office (ODPO) has been the Orbital Debris Engineering Model (ORDEM). This series of models distills down our knowledge of the orbital debris environment to compute debris fluxes on satellites in a given orbit. This information can be used by spacecraft and upper stage designers and operators to design missions for better protection against the debris environment. The current version of the model is ORDEM 3.2, but the ODPO is working on the next generation of ORDEM, to be designated ORDEM 4.0. ORDEM 4.0 will include many known features from previous models, such as the ability to input a spacecraft orbit and time and to compute the flux as a function of debris size, impact speed, impact direction, and debris material densities, as well as uncertainty information on the flux. ORDEM 4.0 will update debris populations using the most recent measurements, including radar observations by the Haystack Ultrawideband Satellite Imaging Radar (HUSIR), NASA’s Goldstone radar, data from the new Space Surveillance Network Space Fence, and observations of Geosynchronous Earth Orbits (GEO) using the Eugene Stansbery-Meter Class Autonomous Telescope (ES-MCAT). The latest in situ impact data from returned hardware surfaces will be used. In addition, ORDEM 4.0 will introduce a parameterized debris shape model based on laboratory hypervelocity impact tests, such as DebriSat. This will allow analysts to implement shape characteristics in their damage equations and more accurately predict impact damage risk by debris of different shapes and orientations. This paper provides an overview of some of the new features forthcoming in ORDEM 4.0 and a status report on its development.

Mark Matney↗

An Overview of NASA’s Newest Engineering Model, ORDEM 4.0

Since the mid-1990s, one of the most important products produced by the NASA Orbital Debris Program Office (ODPO) has been the Orbital Debris Engineering Model (ORDEM). This series of models distills down our knowledge of the orbital debris environment to compute debris fluxes on satellites in a given orbit. This information can be used by spacecraft and upper stage designers and operators to design missions for better protection against the debris environment. The current version of the model is ORDEM 3.2, but the ODPO is working on the next generation of ORDEM, to be designated ORDEM 4.0. ORDEM 4.0 will include many known features from previous models, such as the ability to input a spacecraft orbit and time and to compute the flux as a function of debris size, impact speed, impact direction, and debris material densities, as well as uncertainty information on the flux. ORDEM 4.0 will update debris populations using the most recent measurements, including radar observations by the Haystack Ultrawideband Satellite Imaging Radar (HUSIR), NASA’s Goldstone radar, data from the new Space Surveillance Network Space Fence, and observations of Geosynchronous Earth Orbits (GEO) using the Eugene Stansbery-Meter Class Autonomous Telescope (ES-MCAT). The latest in situ impact data from returned hardware surfaces will be used. In addition, ORDEM 4.0 will introduce a parameterized debris shape model based on laboratory hypervelocity impact tests, such as DebriSat. This will allow analysts to implement shape characteristics in their damage equations and more accurately predict impact damage risk by debris of different shapes and orientations. This paper provides an overview of some of the new features forthcoming in ORDEM 4.0 and a status report on its development.

Mark Matney↗

JPL 1990-3: A 5-nrad extragalactic source catalog based on combined radio interferometric observations

A combined analysis merges 17,000 Deep Space Network (DSN) Very Long Baseline Interferometric (VLBI) observations with 303,000 observations from the Crustal Dynamics Project (CDP) and the International Radio Interferometric Surveying (IRIS) project. Observations from the Radio Reference Frame Development (RRFD) and Time and Earth Motion Precision Observations (TEMPO) programs through late 1990 form the DSN VLBI data set. The combined analysis yields angular coordinates of extragalactic radio sources with a precision of a few nanoradians, as compared with 5 to 10 nrad precision for coordinates derived in the past solely from DSN data. The improvement in the combined analysis is due to the new Mark III DSN data, as well as to increased statistical strength from the large volume of observations from non-DSN experiments. Such a unified analysis is made possible by recent improvements in parameter estimation software efficiency. The terrestrial reference frame is based on joint VLBI experiments using both DSN and CDP antennas, and on specifying the coordinates of VLBI antennas in a proper geocentric coordinate system by means of Global Positioning System (GPS) collocation of VLBI, LLR, and SLR (Laser Ranging) sites.

Sovers, O. J.↗

Fusion Energy Sciences Network Requirements Review: Mild-cycle Update

The US Department of Energy (DOE) Office of Science (SC) world-class research infrastructure provides the research community with premier observational, experimental, computational, and network capabilities. Each user facility is designed to provide unique capabilities to advance core DOE mission science for its sponsor SC program and to stimulate a rich discovery and innovation ecosystem. Research communities gather and flourish around each user facility, bringing together diverse perspectives. The continual reinvention of the practice of science — as users and staff forge novel approaches expressed in research workflows — unlocks new discoveries and propels scientific progress.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scalable deep learning for watershed model calibration

Watershed models such as the Soil and Water Assessment Tool (SWAT) consist of high-dimensional physical and empirical parameters. These parameters often need to be estimated/calibrated through inverse modeling to produce reliable predictions on hydrological fluxes and states. Existing parameter estimation methods can be time consuming, inefficient, and computationally expensive for high-dimensional problems. In this paper, we present an accurate and robust method to calibrate the SWAT model (i.e., 20 parameters) using scalable deep learning (DL). We developed inverse models based on convolutional neural networks (CNN) to assimilate observed streamflow data and estimate the SWAT model parameters. Scalable hyperparameter tuning is performed using high-performance computing resources to identify the top 50 optimal neural network architectures. We used ensemble SWAT simulations to train, validate, and test the CNN models. We estimated the parameters of the SWAT model using observed streamflow data and assessed the impact of measurement errors on SWAT model calibration. We tested and validated the proposed scalable DL methodology on the American River Watershed, located in the Pacific Northwest-based Yakima River basin. Our results show that the CNN-based calibration is better than two popular parameter estimation methods (i.e., the generalized likelihood uncertainty estimation [GLUE] and the dynamically dimensioned search [DDS], which is a global optimization algorithm). For the set of parameters that are sensitive to the observations, our proposed method yields narrower ranges than the GLUE method but broader ranges than values produced using the DDS method within the sampling range even under high relative observational errors. The SWAT model calibration performance using the CNNs, GLUE, and DDS methods are compared using R 2 and a set of efficiency metrics, including Nash-Sutcliffe, logarithmic Nash-Sutcliffe, Kling-Gupta, modified Kling-Gupta, and non-parametric Kling-Gupta scores, computed on the observed and simulated watershed responses. The best CNN-based calibrated set has scores of 0.71, 0.75, 0.85, 0.85, 0.86, and 0.91. The best DDS-based calibrated set has scores of 0.62, 0.69, 0.8, 0.77, 0.79, and 0.82. The best GLUE-based calibrated set has scores of 0.56, 0.58, 0.71, 0.7, 0.71, and 0.8. The scores above show that the CNN-based calibration leads to more accurate low and high streamflow predictions than the GLUE and DDS sets. Our research demonstrates that the proposed method has high potential to improve our current practice in calibrating large-scale integrated hydrologic models.

54 ENVIRONMENTAL SCIENCES↗

Surface Seismic Monitoring of Hydraulic Fracturing Test Site (HFTS) in the Midland Basin, Texas

Low-frequency seismic events of long duration were recorded by a surface array of 48, 3-component geophones during the fracture stimulation of two offset horizontal wells in the Middle Wolfcamp Formation (8000-8100 ft. below the geophone array) at the Hydraulic Fracturing Test Site (HFTS) in Reagan County, TX. Each recorded event was approximately 5-10 seconds long, with no clear first wave arrival; the seismic energy was largely visible on the vertical component suggesting that the events are dominated by P waves. A finite temporal moveout was observed across the seismic network in event arrival times indicating a causal relationship with the local source of deformation. The low-frequency seismic events observed in this study can be distinguished from the more commonly known microseismic events by their: 1) emergent waveform, 2) lack of clear P wave and S wave arrivals, 3) longer duration (few seconds), and 4) lower-frequency energy content (10-60 Hz). Previous researchers have observed similar low-frequency, long duration events in conjunction with the hydraulic fracturing of hydrocarbon reservoirs and have referred to them as long-period, long-duration (LPLD) events in the literature. LPLD events may be important to a comprehensive understanding of fracture stimulation because these events are thought to represent: 1) movement along pre-existing discontinuities such as bedding planes and fractures/faults, 2) deformation of ductile rocks with high clay content, and 3) the jerky tensile opening of hydraulic fractures. LPLD events resulting from slow shear-slip on faults and fractures of relatively larger dimension or rupture in the clay rich rock are collectively referred to as slow-slip seismicity, which was first observed in tectonic and volcanic settings, areas with high pore pressure like hydraulically fractured reservoirs. Because LPLDs are thought to represent deformation mechanisms not captured by microseismic analysis (which dominantly indicate shear failure of brittle rock), we believe that incorporating LPLD events into a new methodology for delimiting stimulated reservoir volume might improve predictions of well production.

Kumar, Abhash↗

Lightning-Generated NO(x) Seen By OMI during NASA's TC-4 Experiment: First Results

We present here case studies identifying upper-tropospheric NO2 produced in convective storms during NASA's Tropical Composition, Cloud and Climate Coupling Experiment (TC~i)n July and August 2007. DC8 aircraft missions, flown from the mission base in Costa Rica, recorded in situ NO2 profiles near active storms and in relatively quiet areas. We combine these data with measurements from the Ozone Monitoring Instrument (OMI) on the Aura satellite to estimate the amount of NO2 produced by lightning (LN02) above background levels in the regions influenced by storms. In our analysis, improved off-line processing techniques are employed to minimize known artifacts in the OM1 data. Information on lightning flashes (primarily CG) observed by the surface network operated by the Instituto Costarricense de Electricidad are examined upwind of regions where OM1 indicates enhanced LNO2. Comparisons of the observed flash data with measurements by the TRMM/LIS satellite instrument are used to obtain the lightning detection efficiency for total flashes. Finally, using the NO/NO2 ratio estimated from DC-8 observations, we estimate the average NO(x) production per lightning flash for each case in this study. The magnitudes of the measured NO(x) enhancements are compared with those observed by the DC-8 and with similar OM1 measurements analyzed in mid-latitude experiments.

Bucsela, Eric↗

Exploring Data Set Bias and Decision Support with Predictive Uncertainty Through Bayesian Approximations and Convolutional Neural Networks

Individual seismic catalogs can contain multiscale observations from fault level to global scales and associated waveforms from discrete events reflect crustal structure across many different scales and locations. Seismic network aperture, geographic location, and observation distance may not provide informative guidance or intuition on how different catalogs will behave across models trained under different conditions. We rely on uncertainty to provide guardrails for when to trust model decisions, but understanding when our uncertainty is trustworthy is an open challenge. Here, in this work, we explore Bayesian approximation methods for assigning predictive uncertainty in seismic event classification problems. We find that computationally expensive Bayesian approximations do not outperform simple ensemble methods. We also find that when exploiting multiple seismic event catalogs, joint training with data from all the catalogs combined with Bayesian approximations and supervised training for classification can obscure bias and result in less robust uncertainty while also not providing substantial performance benefits compared to training individual models for each catalog.

58 GEOSCIENCES↗

A Proposed Astrometric Observing Program for Densifying the ICRF in the Northern Hemisphere

The International Celestial Reference Frame (ICRF) could be of significant importance to the astronomy community for observing weak objects angularly close to ICRF sources with the phase-referencing technique. However, the current distribution of the ICRF sources is found to be largely non-uniform, which precludes the wide use of the ICRF as a catalog of calibrators for phase-referencing observations. We show that adding 150 new sources at appropriate sky locations would reduce the distance to the nearest ICRF source for any randomly-chosen location in the northern sky from up to 13 deg to up to 6 deg, close to the requirement of the phase-referencing technique. Accordingly, a set of 150 such sources, selected from the Jodrell Bank-VLA Astrometric Survey and filtered out using the Very Long Baseline Array Calibrator Survey, has been proposed for observation to the European VLBI Network (EVN) extended with additional geodetic stations. The use of the EVN is essential to this project since most of the new sources will be weaker and thus difficult to observe with standard geodetic networks.

Charlot, Patrick↗

Microfilament distribution in protonemata of the moss Ceratodon

Microfilaments were visualized in dark-grown protonemata of the moss Ceratodon to assess their possible role in tip growth and gravitropism. The relative effectiveness of rhodamine phalloidin (with or without m-maleimidobenzoyl-N-hydroxysuccinimide ester (MBS)) and of immunofluorescence (using the C4 antibody) was evaluated for actin localization in the same cell type. Using immunofluorescence, microfilaments were primarily in an axial orientation within the apical cell. However, a more complex network of microfilaments was observed using rhodamine phalloidin after MBS pretreatment, especially when viewed by confocal laser scanning microscopy. This method revealed a rich three dimensional network of fine microfilaments throughout the apical cell, including the extreme apex. Although there were numerous internal microfilaments, peripheral microfilaments were more abundant. No major redistribution of microfilaments was detected after gravistimulation. The combination of MBS, rhodamine phalloidin, and confocal laser scanning microscopy preserves and reveals microfilaments remarkably well and documents perhaps the most extensive F-actin network visualized to date in any tip-growing cell.

NASA Discipline Plant Biology↗

Editorial: Deep-sea observation equipment and exploration technology

The increasing interest in deep-sea exploration is a crucial catalyst for driving advancements in deep-sea observation technology research. Numerous sophisticated sensors have been developed to facilitate comprehensive studies in deep-sea physics, chemistry, and geology. For example, cutting-edge small and compact seabed samplers are now employed on various platforms, such as Autonomous Underwater Vehicles (AUVs), Remotely Operated Vehicles (ROVs), and Human-Operated Vehicles (HOVs), enabling observation of the hadal zone. Additionally, Micro-electromechanical systems (MEMS) sensors are routinely utilized for ocean wave observation. This Research Topic aims to foster new insights into ocean exploration and observation technology, including ocean sensor technology, ocean observation platforms, and ocean observation reliability technology.

47 OTHER INSTRUMENTATION↗

A UBVRI equatorial extinction star network

An equatorial-extinction star network, based on 1503 observations of 37 stars, is presented. These results together with those of Crawford et al. (1971) provide a well-determined UBVRI extinction network. Identification charts are included.

Barnes, T. G., III↗

Performance of the IVS R1 and R4 Sessions

The International VLBI Service for Geodesy and Astrometry (IVS) has observed the weekly IVS-R1 (R1) and IVS-R4 (R4) series of sessions since 2002. These regular series are generally stable in the sense that the networks were designed to be similar from week to week. The uniformity of these series has allowed researchers to conduct many scientific investigations. The IVS also observes with other networks that allow continued sampling of data from all VLBI stations, but the R1 and R4 observing sessions are a dominant part of overall VLBI observing accounting for 1841 sessions out of a total of 3129 24-hour sessions from 2002.0 to 2020.0 (where the last R1 and R4 in 2019 was on December 30 and December 26, respectively). In this paper, we investigate the evolution of these series in terms of their observing networks. We also discuss the construction of the R1 and R4 networks and the scheduling of these sessions. The performance of these networks in terms of the formal precision of polar motion have improved by factors of 2–3 over the period from 2002.0 to 2018.0. UT1 precision improved by a factor of about 1.2–1.5. The main reason for this improvement is the increased size of the networks. We also discuss the effect on this improvement arising from changes in the data rate and the number of observed sources. There is some degradation in performance after 2018 that is most likely due to a decline in the number of available network stations.

Cynthia C. Thomas↗

The ARM Radar Network: At the Leading-edge of Cloud and Precipitation Observations

The ARM observatories include radars that span a range of frequencies and capabilities to characterize the three-dimensional structure and properties of atmospheric hydrometeors. Improving our ability to predict future weather and climate conditions is strongly linked to achieving significant advancements in our understanding of cloud and precipitation processes. Observations are critical to making these advancements because they both improve our understanding of these processes and provide constraints on numerical models. Historically, instruments for observing cloud properties have limited cloud-aerosol investigations to a small subset of cloud-process interactions. To address these challenges, the last decade has seen the U.S. DOE ARM facility significantly upgrade and expand its surveillance radar capabilities towards providing holistic and multi-scale observations of clouds and precipitation. These upgrades include radars that operate at four frequency bands covering a wide range of scattering regimes, improving upon the information contained in earlier ARM observations. The traditional ARM emphasis on the vertical column is maintained, providing more comprehensive, calibrated, and multiparametric measurements of clouds and precipitation. Furthermore, the ARM radar network now features multiple scanning dual-polarization Doppler radars to exploit polarimetric and multi-Doppler capabilities that provide a wealth of information on storm microphysics and dynamics under a wide range of conditions. While the diversity in wavelengths and detection capabilities are unprecedented, there is still considerable work ahead before the full potential of these radar advancements is realized. This includes synergy with other observations, improved forward and inverse modeling methods, and well-designed data-model integration methods. The overarching goal is to offer a comprehensive characterization of a complete volume of the cloudy atmosphere and to act as a natural laboratory for the study of cloud processes.

54 ENVIRONMENTAL SCIENCES↗

High-speed, cross-continental networks - A necessity

The networking requirements that the Earth Observing System (EOS) program has levied on NASA and the national and international operational networking communities is addressed. The objectives of the EOS program are listed and include the development and operation of an observing system to acquire essential, global earth science data on a long-term, sustained basis and in a manner which maximizes the scientific utility of the data and simplifies data analysis. Network design issues are also discussed, including protocol selection, the Transport Control Protocol/Internet Protocol suite, the Open Systems Interconnect network suite, and the internet evolution. Open and closed network issues are also discussed. A number of networks now in place are assessed including NASNet, and ESNet. These offer possible options and/or solutions to be considered by the NASA Headquarters EOS Data and Information Systems Program.

Wong, C. M.↗