Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHYSICS LABORATORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Development and preliminary results of 270 GHz microwave forward scattering diagnostic system on the experimental advanced superconducting tokamak (EAST)

To measure localized (intermediate, high) poloidal wavenumber electron density fluctuations, a tangential millimeter-wave collective scattering system has been designed and successfully developed on the experimental advanced superconducting tokamak (EAST). This innovative system employs a 270 GHz mm-wave probe beam, emitted from the mid-plane of Port K and directed towards Port P after passing through a combination of two in-vessel mirrors. Here these two ports are located on the EAST device’s midplane and are 110° apart. The downward scattered signals pass through two in-vessel mirrors, and exit through the P window. The received multi-channel separated scattering signals are arranged along the poloidal direction. This optical arrangement makes the monitored turbulent wave number is poloidal dominant and up to 40 cm −1 . The tangential microwave scattering scheme enables this diagnostic to monitor local density fluctuations, with typically a radial spatial resolution △ R = 5 cm, and a wavenumber resolution of △ k = 0.4 cm −1 . The scattering system underwent comprehensive laboratory testing in 2023, with installation finalized in 2024. The system features steerable launch and receiver optics, allowing remote control to position the scattering volume from normalized radius ρ –0 to the pedestal region on a shot-by-shot basis. Effective experimental data, characterized by distinct off-center spectral peaks, have been successfully obtained in neutral beam-heated plasmas on EAST. The beam tracing forward modeling has been employed for experimental data interpretation. The advanced millimeter-wave scattering system provides fluctuation measurement capability from ion temperature gradient to electron temperature gradient scale on low field side. Preliminary experimental density fluctuation data have been successfully obtained in neutral beam-heated plasmas on EAST. The localized measurement will be used for kinetic turbulence transport numerical simulation validation.

high-k collective scattering↗

Multimachine analysis of intermittent fluctuations in the scrape-off layer of magnetically confined fusion plasmas

Far scrape-off layer fluctuations, also known as blobs/filaments, are compared for the first time across six tokamaks: Alcator C-Mod, DIII-D, TCV, KSTAR, MAST, and MAST-U, under the context of stochastic modeling in Ohmic and low confinement mode scenarios. In this model, which well describes these fluctuations, measurements from Langmuir probes are modeled as a superposition of uncorrelated, two-sided exponential temporal pulses. The key parameters of this model are the mean waiting times between consecutive pulses, the pulse duration times and the mean of the pulse amplitudes. The study examines the influence of line-averaged density, plasma current, magnetic field and aspect ratio. The mean amplitudes and pulse waiting times increase with the line-averaged density across devices, while the pulse duration times remain constant. Whereas the variation in waiting times is gradual across the density scan, the mean amplitudes increase abruptly as the density profile broadens and flattens for Alcator C-Mod. The blob waiting times decrease with increasing plasma current and the toroidal magnetic field, while they increase with aspect ratio for conventional tokamaks. The duration times follow the same trends as the waiting times in these parameters but vary more slowly, resulting in the trends in the waiting times dominating the intermittency level of the fluctuations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental demonstration of transient CHI start-up using a floating biased electrode configuration

Transient coaxial helicity injection (CHI) current start-up in a spherical tokamak (ST) has been demonstrated for the first time using a reactor-relevant floating single biased (FSB) electrode configuration on QUEST. Unlike previous applications of CHI on HIT-II and on NSTX in which the entire ST vessel was split in two using two toroidal ceramic rings as vacuum breaks, in the FSB electrode configuration on QUEST, only the lower outer divertor plate is electrically insulated from the rest of the vessel. This is the CHI injector region. A CHI discharge is generated by driving current, using an external power supply, along magnetic field lines that connect the inner and outer divertor plates in the CHI injector region. The CHI plasma evolution and closed flux formation on QUEST are very similar to those on NSTX and have generated toroidal currents of 150 kA with 100 kA of current flowing on closed flux surfaces. An alternate, force-free model approach has been used to derive the CHI scaling relations. The resulting CHI scaling relations from the model are consistent with the conventional CHI scaling relations, which state that the CHI generated toroidal current is proportional to the CHI injector flux and the CHI injector current is inversely proportional to the toroidal field. These results from QUEST bode well for the application of CHI in a new generation of compact high field STs and low aspect ratio tokamaks in which the space for the central solenoid is very restricted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SPE2 Far-field Seismic Data Quicklook

The purpose of this report is to provide a brief overview of the far-field seismic data collected by the array of instruments (Figures 1 and 2) deployed by the Source Physics experiment for shots 1 (roughly 100 kg TNT equivalent at a depth of 60 m) and shot 2, (roughly 2000 kg TNT equivalent at a depth of 45 m). 'Far-field' is taken to refer to instruments in the zone of purely elastic response at distances of 100 m or greater. The primary focus is data from the main instrument array and hence data from other groups is not considered. Infrasound data is not addressed nor any remote sensing data. Data processing was done at LLNL in parallel with the effort at UNR. Raw reftek data was sent via hard disk from NsTec. Reftek data was converted to SEGY and then to SAC format. Data files were renamed according to station and channel information. Reftek logs were reviewed. These data have been reviewed for consistency with the UNR data on the server. The primary goal was quality check and a summary is provided in Tables 1 and 2.

58 GEOSCIENCES↗

Heat load of a P-doped GaAs photocathode in SRF electron gun

Many efforts were made over the last decades to develop a better polarized electron source for the high energy physics. Several laboratories operate DC guns with the Gallium-Arsenide photo-cathode, which yield a highly polarized electron beam. However, the beam's emittance might well be improved using a Superconducting RF electron gun, which delivers beams of higher brightness than DC guns does, because the field gradient at the cathode is higher. SRF guns with metal cathodes and CsTe cathodes have been tested successfully. To produce polarized electrons, a Gallium-Arsenide photo-cathode must be used: an experiment to do so in a superconducting RF gun is under way at BNL. Since the cathode will be normal conducting, the problem about the heat load stemming from the cathode arises. We present our measurements of the electrical resistance of GaAs at cryogenic temperatures, a prediction of the heat load and the verification by measuring the quality factor of the gun with and without cathode.

43 PARTICLE ACCELERATORS↗

Investigating radiatively driven, magnetized plasmas with a university scale pulsed-power generator

We present first results from a novel experimental platform that is able to access physics relevant to topics including indirect-drive magnetized inertial confinement fusion, laser energy deposition, various topics in atomic physics, and laboratory astrophysics (for example, the penetration of B-fields into high energy density plasmas). This platform uses the x rays from a wire array Z-pinch to irradiate a silicon target, producing an outflow of ablated plasma. The ablated plasma expands into ambient, dynamically significant B-fields (∼5 T), which are supported by the current flowing through the Z-pinch. The outflows have a well-defined (quasi-1D) morphology, enabling the study of fundamental processes typically only available in more complex, integrated schemes. Experiments were fielded on the MAGPIE pulsed-power generator (1.4 MA, 240 ns rise time). On this machine, a wire array Z-pinch produces an x-ray pulse carrying a total energy of ∼15 kJ over ∼30 ns. This equates to an average brightness temperature of around 10 eV on-target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stellarator fusion systems enabled by arrays of planar coils

We present an overview of a novel electromagnetic coil configuration for stellarators and its application to two near-term fusion systems. The novel coil configuration is the planar coil stellarator, able to implement precisely-quasisymmetric 3D magnetic fields using a set of planar, plasma-encircling coils and a set of planar, field-shaping coils situated on a surface surrounding the plasma. This configuration combines the stellarator’s advantages of steady-state operation, stability, low recirculating power fraction, and a mature physics basis, with the benefits of using simpler, planar coils which allow for a maintenance scheme leveraging large ports, and the ability to control magnets individually. The initial near-term use case considered is a steady state deuterium–deuterium stellarator neutron source, called Eos. The second near-term use case considered is a deuterium–tritium stellarator fusion pilot plant, called Helios, that would be approximately twice the linear dimension of the Eos design.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Mach number, laser-driven magnetized collisionless shocks

Collisionless shocks are ubiquitous in space and astrophysical systems, and the class of supercritical shocks is of particular importance due to their role in accelerating particles to high energies. While these shocks have been traditionally studied by spacecraft and remote sensing observations, laboratory experiments can provide reproducible and multi-dimensional datasets that provide complementary understanding of the underlying microphysics. We present experiments undertaken on the OMEGA and OMEGA EP laser facilities that show the formation and evolution of high-Mach number collisionless shocks created through the interaction of a laser-driven magnetic piston and magnetized ambient plasma. Through time-resolved, 2-D imaging we observe large density and magnetic compressions that propagate at super-Alfvenic speeds and that occur over ion kinetic length scales. Electron density and temperature of the initial ambient plasma are characterized using optical Thomson scattering. Measurements of the piston laser-plasma are modeled with 2-D radiation-hydrodynamic simulations, which are used to initialize 2-D particle-in-cell simulations of the interaction between the piston and ambient plasmas. The numerical results show the formation of collisionless shocks, including the separate dynamics of the carbon and hydrogen ions that constitute the ambient plasma and their effect on the shock structure. Furthermore, the simulations also show the shock separating from the piston, which we observe in the data at late experimental times.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heat load of a GaAs photocathode in an SRF electron gun

A great deal of effort has been made over the last decades to develop a better polarized electron source for high energy physics. Several laboratories operate DC guns with a gallium arsenide photocathode, which yield a highly polarized electron beam. However, the beam's emittance might well be improved by using a superconducting radio frequency (SRF) electron gun, which delivers beams of a higher brightness than that from DC guns because the field gradient at the cathode is higher. SRF guns with metal and CsTe cathodes have been tested successfully. To produce polarized electrons, a Gallium-Arsenide photo-cathode must be used: an experiment to do so in a superconducting RF gun is under way at BNL. Since a bulk gallium arsenide (GaAs) photocathode is normal conducting, a problem arises from the heat load stemming from the cathode. In this paper, we present our measurements of the electrical resistance of GaAs at cryogenic temperatures, a prediction of the heat load and verification by measuring the quality factor of the gun with and without the cathode at 2 K. We simulate heat generation and flow from the GaAs cathode using the ANSYS program. Finally, by following the findings with the heat load model, we designed and fabricated a new cathode holder (plug) to decrease the heat load from GaAs.

2 K test↗

Overview of the ASDEX Upgrade results

After a 26-month vent ASDEX Upgrade (AUG) went back in operation with a newly designed upper W-divertor suitable for alternative divertor configurations (featuring in-vessel coils and cryo-pump). Parameter scans and an extensive set of measurements were obtained and their interpretation is ongoing. Prompted by the ITER wall change, dedicated experiments on non-boronized plasma startup were contrasted to that employing asymmetric and more symmetric boronizations. The asymmetric boronization proved to be as beneficial as the more symmetric one, which is in contrast to previous model calculations assuming perfect sticking of boron (measurements suggest sticking ≈ 0.3). In the startup phase also the impurity influxes at the outboard limiters were investigated contrasting the unboronized case featuring cold edges (low- Z radiation) to the boronized case, in which the lifetime of the boron layers could be estimated. Pedestal stability investigations revealed that the quasi-continuous exhaust (QCE) regime is obtained when ballooning modes are active in the vicinity of the separatrix and the global peeling-ballooning stability is high enough. Thus, at high enough shaping and high gas flux both can be achieved and QCE is a consequence. The closely related enhanced D-alpha (EDA) mode is not clearly distinguishable from QCE, e.g. the quasi-coherent mode characteristic for EDA also shows up in QCE. In QCE the impurity transport is behaving benign as could be measured for Ne with a novel analysis method making use of a comprehensive set of CXRS measurements. For high radiative fractions the regime of the X-point radiator (XPR) is accessible at AUG and the understanding of its access conditions and behaviour is further developed. Due to the localized radiative cooling at the X-point the XPR can be well diagnosed and thus controlled. For negative triangularity shapes, further experiments at increased shaping resulted in strongly heated L-mode plasmas avoiding ELMs. Two integrated modelling approaches towards ITER suggested that core W-accumulation will be no issue for ITER and that the fusion yield in ITER may be Q = 12 (i.e. ITPA20-IL scaling is too pessimistic). Further, investigations of the ITER ramp-down in AUG provide insights into maintaining position control. Various aspects of shattered pellet injection were investigated in AUG and one of the results show that with increasing Ne fraction the radiation during the current quench increases and the current decay becomes faster.

ASDEX Upgrade↗

Commissioning of the Power Supplies and Coils of the SMART Tokamak

The small aspect ratio tokamak (SMART) is a spherical tokamak (ST) that offers unique capabilities for studying the potential of negative triangularity. It has been designed, constructed, and is currently being operated by the Plasma Science Fusion Technology (PSFT) Laboratory at the University of Seville. SMART has a total of 21 coils, organized into seven independent circuits and driven by five modular power supplies (PS). The PS operation relies on switching converter technology based on IGBT and supercapacitors (SCs). The PS delivers predefined current waveforms to the copper coil system consisting of the central solenoid (CS), 12 toroidal field (TF) coils, three series pairs of poloidal field (PF) coils, and two independent PF coils. This study details the commissioning and validation of the PS toroidal and solenoid coils, as well as the assembly of coils in SMART. The maximum rated current and slope were measured, along with the series impedance of the coils, the output current ripple, and the noise levels. The internal parameters of the SCs were measured, and optimized current profiles were proposed to enhance overall performance. A comparison has been made between the theoretical values and the experimental results, providing insight into the performance of the PS and areas for improvement.

Power electronics↗

Progress in Extending the High-Temperature Plasma Regime in the LHD

In this paper, we show the expansion of the high-temperature regime and related physical phenomena in the Large Helical Device (LHD). At the LHD, we have developed a high-temperature operational regime for both ion (T i ) and electron (T e ) temperatures through understanding the physical characteristics of high-temperature plasma, the enhancement of plasma heating, and the development of technical methods such as wall recycling control and impurity control. In particular, the formation of the ion internal transport barrier (i-ITB) and electron internal transport barrier (e-ITB) in the plasma core region is the key to improving plasma performance. In addition, the deuterium experiment that began in 2017 showed that, due to the isotope effect, the thermal transport of both ions and electrons is suppressed in deuterium plasma compared to light hydrogen plasma, and that a high central temperature can be achieved efficiently. Furthermore, the combination of neutral beam injection (NBI) and electron cyclotron heating (ECH) has extended the operating conditions that simultaneously maintain high T i and T e , and comprehensive research on plasma confinement characteristics with an eye to future fusion reactor conditions has progressed.

Large Helical Device↗

Production of High Yield, Ultra‐Shallow Nitrogen‐Vacancy Centre Ensembles Through High Purity Forming gas Annealing

Dense, ultra‐shallow (<10 nm from the surface) ensembles of nitrogen‐vacancy (NV) centers in diamond are sought‐after for realising practical quantum sensing at the nanoscale. However, these ensembles typically suffer from reduced NV creation efficiency and spin coherence compared to their deeper and bulk counterparts. Consequently, most demonstrations in the literature to date have been restricted to using single NV centers with atypical coherence and charge stability properties not achievable across entire ensembles. Here, in this work, we demonstrate that controlled annealing in a high purity forming gas atmosphere improves near‐surface NV formation efficiency to over 20%. This environment preserves a high quality hydrogen termination throughout the anneal, avoiding material etching over many hours at temperatures up to 1100°C and possibly helping to suppress vacancy out‐diffusion. We show that high temperature annealing is especially vital for improving spin properties in high density, ultra‐shallow implanted samples due to the localised damage profiles produced. By allowing the formation of high yield NV ensembles with improved spin properties, the optimised forming gas anneal can facilitate the reliable production of more sensitive diamond sensors than have previously been accessible.

Healey, Alexander J. [Royal Melbourne Institute of↗

Extreme Enhancement-Mode Operation Accumulation Channel Hydrogen-Terminated Diamond FETs with V th < -6 V and High on-Current

In this work, a new Field Effect Transistor device concept based on hydrogen-terminated diamond (H-diamond) is demonstrated that operates in an Accumulation Channel rather than a Transfer Doping regime. The FET devices demonstrate both extreme enhancement-mode operation and high on-current with improved channel charge mobility compared to Transfer-Doped equivalents. Electron-beam evaporated Al 2 O 3 is used on H-diamond to suppress the Transfer Doping mechanism and produce an extremely high ungated channel resistance. A high-quality H-diamond surface with an unpinned Fermi level is crucially achieved, allowing for the formation of a high-density hole accumulation layer by gating the entire device channel which is encapsulated in dual-stacks of Al 2 O 3 . Completed devices with gate/channel length of 1 µm demonstrate record threshold voltage < -6 V with on-current > 80 mA mm -1 . Carrier density and mobility figures extracted by CV analysis indicate a high 2D charge density of ≈ 2 × 10 12 cm -2 and increased hole mobility of 110 cm 2 V -1 s -1 in comparison with more traditional Transfer-Doped H-diamond FETs. These results demonstrate the most negative threshold voltage yet reported for H-diamond FETs and highlight a powerful new strategy to greatly improve carrier mobility and enable enhanced high power and high frequency diamond transistor performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Valuing Maintenance Strategies for Fusion Plants as Part of a Future Electricity Grid

Scheduled maintenance is likely to be lengthy and therefore consequential for the economics of fusion power plants. The maintenance strategy that maximizes the economic value of a plant depends on internal factors such as the cost and durability of the replaceable components, the frequency and duration of the maintenance blocks, and the external factors of the electricity system in which the plant operates. Here, this paper examines the value of fusion power plants with various maintenance properties in a decarbonized United States Eastern Interconnection circa 2050. Seasonal variations in electricity supply and demand mean that certain times of year, particularly spring to early summer, are best for scheduled maintenance. Seasonality has two important consequences. First, the value of a plant can be 15% higher than what one would naively expect if value were directly proportional to its availability. Second, in some cases, replacing fractions of a component in shorter maintenance blocks spread over multiple years is better than replacing it all at once during a longer outage, even through the overall availability of the plant is lower in the former scenario.

power plant, maintenance, seasonality, electricity↗

Polywell Revisited

The Polywell fusion concept, originally proposed by Robert W. Bussard in 1985, has been investigated for over four decades as a potential solution for achieving net fusion energy in a compact and economically viable reactor. It combines two distinct approaches: high-beta magnetic cusp confinement of electrons using polyhedral coil configurations and electrostatic ion confinement via a potential well formed by injected electron beams. While the hybrid nature of the Polywell system offers advantages in plasma stability and engineering simplicity, previous efforts have been limited by persistent challenges in achieving sufficient plasma confinement required to generate a net energy gain. Here, in this study, we examine previous works and identify limitations of several Polywell embodiments that have historically impeded progress. We present an updated Polywell physics model incorporating experimental findings and recent first-principles particle-in-cell simulations. This updated model outlines a credible path toward overcoming confinement losses and achieving net energy gain using deuterium-tritium (D-T) fuels. Our findings provide a renewed scientific basis for the continued development of the Polywell fusion concept as a practical and scalable approach to fusion energy.

Electrostatic potential well↗

Adventures in Plasma Chemistry

Plasma chemistry is a remarkably diverse field that spans many areas of fundamental and applied science and industrial technology. Here, over more than a century of study and application, the field has grown in multiple directions and continues to redefine itself and expand its impact. Some promising new directions are identified in quantitative methods, material processing, and applications to living systems.

Graves, D. B. [Princeton Univ., NJ (United States)↗