Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLATELET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Below Band-Gap Laser Ablation of Diamond for Transmission Electron Microscopy

A 248-nm excimer laser was used to thin naturally occurring type 1a diamond substrates at normal and glancing (22 deg) incidence. Perforation of a 250 micron thick substrate was achieved in about 15 minutes at normal incidence. Whilst the substrate thinned at glancing incidence was found to have large electron-transparent areas, that thinned at normal incidence required additional argon milling to achieve electron transparency. X-ray photoelectron spectroscopy of the back surface of the diamond failed to detect any graphite or glassy carbon, confirming that damage due to laser ablation occurs only at the incident surface. Samples prepared using this technique imaged in the transmission electron microscope were observed to have retained the nitrogen platelets

Posthill, J. B.↗

Experimental Observations of Mechanisms of Pattern Formation During Freeze Casting

Empirically, many different materials compositions have been freeze cast over the years. Few have been analyzed to better understand the mechanisms by which the ice crystal growth drives structure formation, particularly the substructures on the cell walls. Collating substructural features, for example, ridges, bridges, and “jellyfish-like” substructures, found on the cell walls of freeze-cast ceramics (platelets versus particles), fibrillated biopolymers (collagen, nanocellulose), and "smooth" biopolymers (chitosan, trehalose), we capture the ice crystal growth process and analyze it both in situ in 2D and "post-mortem" in 3D to gain insights into anisotropic ice crystal growth and other self-assembly mechanisms. Combining these experimental observations with 3D Phase-field simulations of structure formation in ice-templated materials, detailed in a companion presentation, it becomes possible to gain fundamental science insights and to obtain the desired structure-property-processing correlations not only at the more traditional macroscopic, but also at the meso- and microscopic scales.

Kaiyan Yin↗

The Spleen in Spaceflight

Studies related to splenic physiology during spaceflight have focused on its immune function. However, the internal jugular deep vein thrombosis discovered during a recent space mission spotlighted that the circulatory and hemostatic physiology of spaceflight is not yet well understood and likely involve not only aspects of hemodynamics, but also the output of the reticuloendothelial system (RES), which effects homeostasis via RBC clearance, mediates platelet formation and storage, blood viscosity, and thrombotic functions. On Earth, the spleen plays an active role in the RES and hemostatic physiology. What role might the spleen play in circulation hemostatic physiology during spaceflight and what alterations in its function should be expected in the microgravity environment? In reviewing the literature to date we sought to understand: - Splenic effects on RBC clearance, anemia, and hemostasis - Splenic and splanchnic contributions to arterial and venous blood storage - How splenic and splanchnic physiology may alter in microgravity

Samuel Ko↗

Effect of Ni2+, Zn2+, and Co2+ on green rust transformation to magnetite

In this study, we investigated Ni2+, Zn2+, and Co2+ mineralogical incorporation and its effect on green rust transformation to magnetite. Mineral transformation experiments were conducted by heating green rust suspensions at 85 °C in the presence of Ni2+, Zn2+, or Co2+ under strict anoxic conditions. Transmission electron microscopy and powder X-ray diffraction showed the conversion of hexagonal green rust platelets to fine grained cubic magnetite crystals. The addition of Ni2+, Zn2+, and Co2+ resulted in faster rates of mineral transformation. The conversion of green rust to magnetite was concurrent to significant increases in metal uptake, demonstrating a strong affinity for metal sorption/ co-precipitation by magnetite. Dissolution ratio curves showed that Ni2+, Zn2+, and Co2+ cations were incorporated into the mineral structure during magnetite crystal growth. The results indicate that the transformation of green rust to magnetite is accelerated by metal impurities, and that magnetite is a highly effective scavenger of trace metals during mineral transformation. The implications for using diagenetic magnetite from green rust precursors as paleoproxies of Precambrian ocean chemistry are discussed.

Hydrosulfate green rust↗

High Yield Exfoliation of a Sub-Micron Hexagonal Boron Nitride Using a Solvent Free Method

Sodium fluoride (NaF) has been found to be an activation agent in exfoliating a hexagonal boron nitride (hBN) platelet, using solvent free method. The procedure was carried out by enhancing the intercalation of ferric chloride (FeCl3) in an intermediate step, up to 330 °C, followed by removal of the by-product at room temperature. In this research, five additional common salts including lithium fluoride, potassium fluoride, lithium chloride, sodium chloride, and potassium chloride, were examined and compared to NaF for their effectiveness in producing the most exfoliation of a commercially available sub-micron-size hBN. It was found that, all fluoride and chloride salts significantly activated the intercalation of FeCl3 into this hBN. Analyses and characterization from X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy and Raman spectroscoy revealed NaCl to be one of most effective agents without further heat treatment and the least expensive salt in the intercalating reaction and exfoliation process. The synthetic route of this solvent free method is straightforward with 89% yield and above which can be produced on a large scale.

boron nitride↗

Characteristics of CeCoIn5/Al/AlOx/Nb and CeCoIn5/Al/AlOx/Al Tunnel Junctions

We report characteristics of CeCoIn{sub 5}/Al/AlO{sub x}/Nb and CeCoIn{sub 5}/Al/AlO{sub x}/Al tunnel junctions fabricated on the (0 0 1) surface of CeCoIn{sub 5} crystal platelets. The main result of this work is the observation of a low Josephson current (as compared with that expected from the Ambegaokar-Baratoff formula), which is consistent with idea that the order parameter in the heavy-fermion superconductor CeCoIn{sub 5} has unconventional pairing symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pd menbrane having improved H.sub.2-permeance, and method of making

An H.sub.2-permeable membrane system (117) comprises an electroless-deposited plating (115) of Pd or Pd alloy on a porous support (110, 110'). The Pd plating comprises face-centered cubic crystals cumulatively having a morphology of hexagonal platelets. The permeability to H.sub.2 of the membrane plating (115) on the porous support is significantly enhanced, being at least greater than about 1.3.times.10.sup.-8 molm.sup.-1s.sup.-Pa.sup.-0.5 at 350.degree. C., and even greater than about 3.4.times.10.sup.-8 molm.sup.-1s.sup.-1Pa.sup.-0.5. The porous support (110, 110') may be stainless steel (1100 and include a thin ceramic interlayer (110') on which the Pd is plated. The method of providing the electroless-deposited plating includes preheating a Pd electroless plating solution to near a plating temperature substantially greater than room temperature, e.g. 60.degree. C., prior to plating.

36 MATERIALS SCIENCE↗

Beta Androstenediol Mitigates the Damage of 1 GeV/n Fe Ion Particle Radiation to the Hematopoietic System

Space exploration is associated with exposure to 1-3 Gy solar particle radiation and galactic cosmic radiation that could increase cancer rates. Effective nontoxic countermeasures to high linear energy transfer (LET) radiation exposure are highly desirable but currently not available. The aim was to determine whether a single subcutaneous injection of androstenediol ({Delta}(5) androsten-3{beta}, 17{beta}-diol [AED]) could mitigate and restore the mouse hematopoetic system from the radiation-mediated injury of 3 Gy whole-body high LET (56)Fe(26+) exposure. The findings show that postradiation AED treatment has an overall positive and significant beneficial effect to restore the levels of hematopoeitic elements (p < 0.001). Androstenediol treatment significantly increased monocyte levels at days 4, 7, and 14 and, similarly, increased red blood cell, hemoglobin, and platelet counts. Flow cytometry analysis 14 days after radiation and AED treatment demonstrated an increase (p < 0.05) in bone marrow cells counts. Ex vivo osteoclastogenesis studies show that AED treatment is necessary and advantageous for the development and restoration of osteoclastogenesis after radiation exposure. These findings clearly show that androstenediol functions as a countermeasure to remedy hematopoeitic injury mediated by high LET iron ion radiation. Presently, no other agent has been shown to have such properties.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Blood Flow: Multi-scale Modeling and Visualization (July 2011)

Multi-scale modeling of arterial blood flow can shed light on the interaction between events happening at micro- and meso-scales (i.e., adhesion of red blood cells to the arterial wall, clot formation) and at macro-scales (i.e., change in flow patterns due to the clot). Coupled numerical simulations of such multi-scale flow require state-of-the-art computers and algorithms, along with techniques for multi-scale visualizations. This animation presents early results of two studies used in the development of a multi-scale visualization methodology. The first illustrates a flow of healthy (red) and diseased (blue) blood cells with a Dissipative Particle Dynamics (DPD) method. Each blood cell is represented by a mesh, small spheres show a sub-set of particles representing the blood plasma, while instantaneous streamlines and slices represent the ensemble average velocity. In the second we investigate the process of thrombus (blood clot) formation, which may be responsible for the rupture of aneurysms, by concentrating on the platelet blood cells, observing as they aggregate on the wall of an aneruysm. Simulation was performed on Kraken at the National Institute for Computational Sciences. Visualization was produced using resources of the Argonne Leadership Computing Facility at Argonne National Laboratory.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of H and He Irradiation on Cavity Formation and Blistering in Ceramics

Single- or poly-crystalline specimens of SiC, Si{sub 3}N{sub 4}, MgO, Al{sub 2}O{sub 3} and MgAl{sub 2}O{sub 4} were implanted with 0.4-1 MeV H{sup +} or He{sup +} ion beams at room temperature and 650 C up to fluences of {approx}1 x 10{sup 22}/m{sup 2}. This produced peak implanted gas and displacement damage levels as high as {approx}50 at.% and 34 displacements per atom (dpa). The specimens were subsequently examined optically, and in cross-section using transmission electron microscopy. Subsurface blistering occurred for specimens irradiated to H or He fluences greater than about 3 x 10{sup 21}/m{sup 2} ({approx}15 at.% peak implanted gas concentration), and surface exfoliation occurred for fluences above {approx}1 x 10{sup 22}/m{sup 2} ({approx}40 at.% implanted gas). Both helium and hydrogen had comparable effectiveness for inducing blistering and exfoliation on an atomic basis. The threshold blistering and exfoliation fluences for both ions were weakly dependent on temperature between 25 and 650 C. Both H and He were found to be very effective in inducing matrix cavity formation, due to their low solubility in these ceramics. The implanted gas concentrations that resulted in visible cavity formation generally ranged from 1 to 5 at.%. Visible cavity formation was readily induced during room temperature irradiation despite the limited vacancy mobility in these ceramics at room temperature. Three general types of cavity morphologies were observed: isolated cavities, clusters of small cavities (typically associated with dislocation loops), and two-dimensional platelets. Cavity formation was observed to initiate at the periphery of dislocation loops in some cases. During elevated temperature irradiation, cavity formation was often observed to be preferentially associated with certain low-index habit planes, particularly if the habit plane was oriented nearly parallel to the irradiated surface: (0001) and {l_brace}1{bar 1}00{r_brace} for Al{sub 2}O{sub 3}, (0001) for a-SiC, {l_brace}001{r_brace} and {l_brace}110{r_brace} for MgO, and {l_brace}110{r_brace} and {l_brace}111{r_brace} for MgAl{sub 2}O{sub 4}. The bubble formation and blistering behavior of the ceramics was similar to that observed in other studies of metals irradiated at comparable homologous temperatures. Ionization-induced diffusion effects associated with dual-beam light ion irradiation appeared to exert only a weak effect on cavity and dislocation loop growth compared to the single ion irradiation conditions.

08 HYDROGEN↗

OBSERVATION AND MECHANISM OF HYDRIDE IN ZIRCALOY-4 AND LOCAL HYDRIDE RE-ORIENTATION INDUCED BY HIGH PRESSURE AT HIGH TEMPERATURES

Hydrided Zircaloy-4 samples were produced by a gas charging method to desired amounts of hydrogen. For low hydrogen content samples, the hydrided platelets appear elongated and needle-like, orientated in the circumferential direction. Mechanical testing was carried out by the ring compression method at various temperatures. Samples with higher hydrogen concentration resulted in lower strain before fracture and reduced maximum load. The trend between temperature and ductility was also very clear: increasing temperatures resulted in increased ductility of the hydrided cladding. A single through-wall crack was observed for a hydrided sample having very high hydrogen concentration under ring compression testing. For samples having lower hydrogen concentrations, the fracture surfaces traversed both circumferential and radial directions, and for which voids were observed near the hydrides. Mechanical tests to study hydride reorientation in these samples are under way, and the results will be reported in the near future.

Hydride↗

Multiscale Simulation of Blood Flow in Brain Arteries with an Aneurysm

Multi-scale modeling of arterial blood flow can shed light on the interaction between events happening at micro- and meso-scales (i.e., adhesion of red blood cells to the arterial wall, clot formation) and at macro-scales (i.e., change in flow patterns due to the clot). Coupled numerical simulations of such multi-scale flow require state-of-the-art computers and algorithms, along with techniques for multi-scale visualizations.This animation presents results of studies used in the development of a multi-scale visualization methodology. First we use streamlines to show the path the flow is taking as it moves through the system, including the aneurysm. Next we investigate the process of thrombus (blood clot) formation, which may be responsible for the rupture of aneurysms, by concentrating on the platelet blood cells, observing as they aggregate on the wall of the aneurysm.

59 BASIC BIOLOGICAL SCIENCES↗

Low cost fuel cell diffusion layer configured for optimized anode water management

A fuel cell comprises a cathode gas diffusion layer, a cathode catalyst layer, an anode gas diffusion layer, an anode catalyst layer and an electrolyte. The diffusion resistance of the anode gas diffusion layer when operated with anode fuel is higher than the diffusion resistance of the cathode gas diffusion layer. The anode gas diffusion layer may comprise filler particles having in-plane platelet geometries and be made of lower cost materials and manufacturing processes than currently available commercial carbon fiber substrates. The diffusion resistance difference between the anode gas diffusion layer and the cathode gas diffusion layer may allow for passive water balance control.

42 ENGINEERING↗

Highly conductive composites for fuel cell flow field plates and bipolar plates

This invention provides a fuel cell flow field plate or bipolar plate having flow channels on faces of the plate, comprising an electrically conductive polymer composite. The composite is composed of (A) at least 50% by weight of a conductive filler, comprising at least 5% by weight reinforcement fibers, expanded graphite platelets, graphitic nano-fibers, and/or carbon nano-tubes; (B) polymer matrix material at 1 to 49.9% by weight; and (C) a polymer binder at 0.1 to 10% by weight; wherein the sum of the conductive filler weight %, polymer matrix weight % and polymer binder weight % equals 100% and the bulk electrical conductivity of the flow field or bipolar plate is at least 100 S/cm. The invention also provides a continuous process for cost-effective mass production of the conductive composite-based flow field or bipolar plate.

36 MATERIALS SCIENCE↗

Nucleation of He Bubbles at Grain Boundaries of α-Fe

The formation of He bubbles in bulk or at grain boundaries (GBs) has major consequences for the structural integrity of first-wall materials. To gain insight into He effects, the accumulation of He atoms and nucleation of He bubbles in a Σ3<110>{112} GB of α-Fe is being studied using molecular dynamics with our newly developed Fe-He potential [1]. It is found that the accumulation of He atoms, the formation of He bubbles, and the evolution of the GB structure all depend on the He concentration and temperature. When a He concentration of 1% is introduced within the GB region at temperatures higher than 600 K, small He clusters are formed, and a few Fe self-interstitial atoms (SIAs) are emitted from the He clusters. The SIAs easily migrate to the nearby atomic planes and form <111> crowdions. At a He concentration of 5%, a few large He clusters are found, in platelet form, and dislocations are also formed at the peripheries of these large He clusters. At 10% He concentration the atomic structure of the GB is significantly changed due to the formation of large He clusters, and the large number of SIAs that are emitted can rearrange to form an extra atomic plane within the GB, resulting in the self-healing of the deformation induced by He accumulation and the GB climbing along the [112] direction.

Yang, Li↗

Nanocomposite conformal corrosion barrier coating

Metals across all industries demand anti-corrosion surface treatments and drive a continual need for high-performing and low-cost coatings. Ordered thin films comprising aligned inorganic platelets dispersed in a polyelectrolyte polymer matrix provide a new class of transparent conformal barrier coatings for protection in corrosive atmospheres. For example, films assembled via layer-by-layer deposition, as thin as 90 nm, are shown to reduce copper corrosion rates by >1000&times; in an aggressive H 2 S atmosphere. These coatings can provide high-performing anti-corrosion treatment alternatives to costlier, more toxic, and less scalable thin films, such as graphene, hexavalent chromium, or atomic layer deposited metal oxides.

Schindelholz, Eric John↗

Using Microscopy and Magnetization Measurements to Characterize Electron Irradiation of Nb and Nb3Sn

Recently, high-energy irradiation experiments on industrial multilamentary Nb3Sn wires have been performed; previous work showed an enhancement in Jc with 24 GeV proton irradiation with uences up to t 1:381021p/m2 [Spina, 2015] and an enhancement in Jc with 1 MeV neutron irradiation with uences up to t 1 1022n/m2 [Baumgartner et al., 2013]. This enhancement is explained by an enhancement of the pinning force due to radiationinduced point pinning defects, in addition to the grain boundary pinning. However, this created a large amount of radioactivity, with 1{2 on the order of magnitude of years. Thus, electron irradiation is a promising technique for creating articial pinning centers, while minimizing the amount of radioactivity present. We present preliminary results for electron irradiation on Nb3Sn wires and give upper bounds on eective uences for Jc enhancement. Furthermore, creating vacancies via electron irradiation is useful in the realm of SRF cavities, as vacancies can trap Hydrogen, preventing the formation of degradatory Nb-H compounds during cryogenic cooling. We present computer-aided microscopy analysis comparing hydride formation on Nb platelets before and after irradiation.

43 PARTICLE ACCELERATORS↗

Methods for producing metal carbide materials

Methods of producing silicon carbide, and other metal carbide materials. The method comprises reacting a carbon material (e.g., fibers, or nanoparticles, such as powder, platelet, foam, nanofiber, nanorod, nanotube, whisker, graphene (e.g., graphite), fullerene, or hydrocarbon) and a metal or metal oxide source material (e.g., in gaseous form) in a reaction chamber at an elevated temperature ranging up to approximately 2400° C. or more, depending on the particular metal or metal oxide, and the desired metal carbide being produced. A partial pressure of oxygen in the reaction chamber is maintained at less than approximately 1.01×102 Pascal, and overall pressure is maintained at approximately 1 atm.

Garnier, John E.↗