Search NASA⌕ Search

SEARCH · Search NASA

Results for “Positive Transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Non-stoichiometric material transfer in the pulsed laser deposition of LaAlO3

Inequivalent angular distributions have been found for La and Al in the ablation plume from LaAlO3 single crystal targets using a KrF laser during pulsed laser deposition. Angular distributions and stoichiometries in the condensate were measured and reveal decidedly non-stoichiometric transfer from target to substrate over most of the angular range. Composition varied dramatically for plume angles parallel to the long axis of the laser spot with the on-axis position exhibiting a peak in the La/Al atom ratio at ~1.5. The distributions were more diffuse in the perpendicular direction. Stoichiometric LaAlO3 was found in the condensate only at an extreme off-axis position.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distinguishing triplet energy transfer and trap-assisted recombination in multi-color organic light-emitting diode with an ultrathin phosphorescent emissive layer

An ultrathin layer of deep-red phosphorescent emitter tris(1-phenylisoquinoline) iridium (III) (Ir(piq){sub 3}) is inserted within different positions of the electron blocking layer fac-tris (1-phenylpyrazolato-N,C{sup 2′})-iridium(III) (Ir(ppz){sub 3}) to distinguish the contribution of the emission from the triplet exciton energy transfer/diffusion from the adjacent blue phosphorescent emitter and the trap-assisted recombination from the narrow band-gap emitter itself. The charge trapping effect of the narrow band-gap deep-red emitter which forms a quantum-well-like structure also plays a role in shaping the electroluminescent characteristics of multi-color organic light-emitting diodes. By accurately controlling the position of the ultrathin sensing layer, it is considerably easy to balance the white emission which is quite challenging for full-color devices with multiple emission zones. There is nearly no energy transfer detectable if 7 nm thick Ir(ppz){sub 3} is inserted between the blue phosphorescent emitter and the ultrathin red emitter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shock interference heat transfer to tank configurations mated to a straight-wing space shuttle orbiter at Mach number 10.3

Heat transfer was measured on a space shuttle-tank configuration with no mated orbiter in place and with the orbiter in 10 different mated positions. The orbiter-tank combination was tested at angles of attack of 0 deg and 5 deg, at a Mach number of 10.3, and at a free-stream Reynolds number of one million based on the length of the tank. Comparison of interference heat transfer with no-interference heat transfer shows that shock interference can increase the heat transfer to the tank by two orders of magnitude along the ray adjacent to the orbiter and can cause high temperature gradients along the tank skin. The relative axial location of the two mated vehicles determined the location of the sharp peaks of extreme heating as well as their magnitude. The other control variables (the angle of attack, the gap, and the cross-section shape) had significant effects that were not as consistent or as extreme.

Crawford, D. H.↗

Elucidation of Marcus Relationships for Hydride Transfer Reactions Involving Transition Metal Hydrides

The rate of hydride transfer from three Ir hydride complexes of the type Cp*Ir( R bpy)H + (Cp* = C 5 Me 5 ; R bpy = 4,4′-R-2,2′-bipyridine, R = OMe, H, CO 2 Me) to six N-methylacridinium ( R Acr + ) acceptors with electronically different substituents in the 2- or 2,7-positions were measured. Using the thermodynamic hydricity of the donors and the hydride affinity of the acceptors the thermodynamic driving forces for hydride transfer were determined. Brønsted plots, which correlate kinetic and thermodynamic hydricity, demonstrate distinct linear free energy relationships for each complex, with different Brønsted α values. Thus, at the same driving force hydride transfer from Cp*Ir( OMe bpy)H + is faster than for Cp*Ir(bpy)H + or Cp*Ir( CO2Me bpy)H + . Experimental and computational analyses are consistent with a concerted hydride transfer mechanism for all Ir complexes. As the thermodynamic driving force increases an earlier transition state is observed and all transition states also include π-stacking interactions between the donor and acceptor, which likely contribute to the different α values. The experimental data fits well to the Marcus model, enabling the determination of reorganization energies (λ) that range from 58 to 69 kcal mol -1 . These are lower than λ values for hydride transfer reactions involving organic donors and acceptors. This work provides a rare example of the correlation of kinetic and thermodynamic hydricity using only experimental data and shows that hydride transfer reactions involving metal hydrides can follow Marcus theory. Furthermore, the findings offer insight into controlling metal-catalyzed hydride transfer reactions, which is valuable for designing improved systems for a range of transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrahigh energy density Li-ion batteries based on cathodes of 1D metals with –Li–N–B–N– repeating units in α-Li{sub x}BN{sub 2} (1 ⩽ x ⩽ 3)

Ultrahigh energy density batteries based on α-Li{sub x}BN{sub 2} (1 ⩽ x ⩽ 3) positive electrode materials are predicted using density functional theory calculations. The utilization of the reversible LiBN{sub 2} + 2 Li{sup +} + 2 e{sup −} ⇌ Li{sub 3}BN{sub 2} electrochemical cell reaction leads to a voltage of 3.62 V (vs Li/Li{sup +}), theoretical energy densities of 3251 Wh/kg and 5927 Wh/l, with capacities of 899 mAh/g and 1638 mAh/cm{sup 3}, while the cell volume of α-Li{sub 3}BN{sub 2} shrinks only 2.8% per two-electron transfer on charge. These values are far superior to the best existing or theoretically designed intercalation or conversion-based positive electrode materials. For comparison, the theoretical energy density of a Li–O{sub 2}/peroxide battery is 3450 Wh/kg (including the weight of O{sub 2}), that of a Li–S battery is 2600 Wh/kg, that of Li{sub 3}Cr(BO{sub 3})(PO{sub 4}) (one of the best designer intercalation materials) is 1700 Wh/kg, while already commercialized LiCoO{sub 2} allows for 568 Wh/kg. α-Li{sub 3}BN{sub 2} is also known as a good Li-ion conductor with experimentally observed 3 mS/cm ionic conductivity and 78 kJ/mol (≈0.8 eV) activation energy of conduction. The attractive features of α-Li{sub x}BN{sub 2} (1 ⩽ x ⩽ 3) are based on a crystal lattice of 1D conjugated polymers with –Li–N–B–N– repeating units. When some of the Li is deintercalated from α-Li{sub 3}BN{sub 2} the crystal becomes a metallic electron conductor, based on the underlying 1D conjugated π electron system. Thus, α-Li{sub x}BN{sub 2} (1 ⩽ x ⩽ 3) represents a new type of 1D conjugated polymers with significant potential for energy storage and other applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Resolution Structure of the ba3 Cytochrome c Oxidase from Thermus thermophilus in a Lipidic Environment

The fundamental chemistry underpinning aerobic life on Earth involves reduction of dioxygen to water with concomitant proton translocation. This process is catalyzed by members of the heme-copper oxidase (HCO) superfamily. Despite the availability of crystal structures for all types of HCO, the mode of action for this enzyme is not understood at the atomic level, namely how vectorial H{sup +} and e{sup -} transport are coupled. Toward addressing this problem, we report wild type and A120F mutant structures of the ba{sub 3}-type cytochrome c oxidase from Thermus thermophilus at 1.8 {angstrom} resolution. The enzyme has been crystallized from the lipidic cubic phase, which mimics the biological membrane environment. The structures reveal 20 ordered lipid molecules that occupy binding sites on the protein surface or mediate crystal packing interfaces. The interior of the protein encloses 53 water molecules, including 3 trapped in the designated K-path of proton transfer and 8 in a cluster seen also in A-type enzymes that likely functions in egress of product water and proton translocation. The hydrophobic O{sub 2}-uptake channel, connecting the active site to the lipid bilayer, contains a single water molecule nearest the Cu{sub B} atom but otherwise exhibits no residual electron density. The active site contains strong electron density for a pair of bonded atoms bridging the heme Fe{sub a3} and Cu{sub B} atoms that is best modeled as peroxide. The structure of ba{sub 3}-oxidase reveals new information about the positioning of the enzyme within the membrane and the nature of its interactions with lipid molecules. The atomic resolution details provide insight into the mechanisms of electron transfer, oxygen diffusion into the active site, reduction of oxygen to water, and pumping of protons across the membrane. The development of a robust system for production of ba{sub 3}-oxidase crystals diffracting to high resolution, together with an established expression system for generating mutants, opens the door for systematic structure-function studies.

59 BASIC BIOLOGICAL SCIENCES↗

Possibility of Determining the Graphene Doping Level Using Raman Spectra

Raman spectroscopy was used to study the structure of graphene synthesized from methane by chemical vapor deposition at atmospheric pressure and transferred to a SiO{sub 2}/Si substrate using various transfer and polymer-removal methods. It was found that the dependences of the 2D peak positions on the G peak positions of the studied samples were well-behaved linear functions with slopes of ~2.2 that suggested the existence of biaxial stress in the graphene. It was discovered that the doping in the samples changed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Visible-light-induced blue MoO{sub 3}–C{sub 3}N{sub 4} composite with enhanced photocatalytic activity

Highlights: • Novel MoO{sub 3}–C{sub 3}N{sub 4} composite was prepared by a mixing-calcination method. • The MoO{sub 3}–C{sub 3}N{sub 4} composite shows remarkably enhanced absorption of visible light. • The MoO{sub 3}–C{sub 3}N{sub 4} composite shows superior visible-light photocatalytic activity. - Abstract: Composite photocatalyst of blue MoO{sub 3}/g-C{sub 3}N{sub 4} (denoted as MoO{sub 3}–C{sub 3}N{sub 4}) was prepared by a simple mixing-calcination method. The obtained MoO{sub 3}–C{sub 3}N{sub 4} composite contains a low amount of molybdenum blue and shows remarkably enhanced absorption of visible light and high efficiency for the degradation of methylene blue dye (MB) under visible light. The enhancement of visible light photocatalytic activity in MoO{sub 3}–C{sub 3}N{sub 4} is attributed to the synergetic effect: (i) the strong and wide absorption of visible light, (ii) the high separation and easy transfer of photogenerated electron–hole pairs at the heterojunction interfaces derived from the match of band position between the g-C{sub 3}N{sub 4} and MoO{sub 3}.

36 MATERIALS SCIENCE↗

Influence of Anion Delocalization on Electron Transfer in a Covalent Porphyrin Donor–Perylenediimide Dimer Acceptor System

Photodriven electron transfer from a donor excited state to an assembly of electronically coupled acceptors has been proposed to enhance charge transfer efficiency in functional organic electronic materials. However, the circumstances under which this may occur are difficult to investigate in a controlled manner in disordered donor–acceptor materials. Here we investigate the effects of anion delocalization on electron transfer using zinc meso-tetraphenylporphyrin (ZnTPP) as a donor and a perylene-3,4:9,10-bis(dicarboximide) dimer as the acceptor (PDI 2 ). The PDI units of the dimer are positioned in a cofacial orientation relative to one another by attachment of the imide group of each PDI to the 4- and 5-positions of a xanthene spacer. Furthermore, the distal imide group of one PDI is linked to the para-position of one ZnTPP phenyl group to yield ZnTPP-PDI 2 . The data for the dimer are compared to two different ZnTPP-PDI monomer reference systems designed to probe electron transfer to each of the individual PDI molecules comprising PDI 2 . The electron transfer rate from the ZnTPP lowest excited singlet state to PDI 2 is increased by 50% relative to that in ZnTPP-PDI, when the data are corrected for the statistics of having two electron acceptors. Femtosecond transient IR absorption spectroscopy provides evidence that the observed enhancement in charge separation results from electron transfer producing a delocalized PDI 2 anion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting Accurate Electronic Excitation Transfer Rates via Marcus Theory with Boys or Edmiston-Ruedenberg Localized Diabatization †

We model the triplet-triplet energy-transfer experiments from the Closs group [Closs, G. L.; et al. J. Am. Chem. Soc. 1988, 110, 2652.] using a combination of Marcus theory and either Boys or Edmiston-Ruedenberg localized diabatization, and we show that relative and absolute rates of electronic excitation transfer may be computed successfully. For the case where both the donor and acceptor occupy equatorial positions on a rigid cyclohexane bridge, we find βcalc = 2.8 per C-C bond, compared with the experimental value βexp = 2.6. This work highlights the power of using localized diabatization methods as a tool for modeling nonequilibrium processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoluminescence properties and energy levels of RE (RE = Pr, Sm, Er, Tm) in layered-CaZnOS oxysulfide

RE{sup 3+} (RE = Pr, Sm, Er, Tm)-activated CaZnOS samples were prepared by a solid-state reaction method at high temperature, and their photoluminescence properties were investigated. Doping with RE{sup 3+} (RE = Pr, Sm, Er, Tm) into layered-CaZnOS resulted in typical RE{sup 3+} (RE = Pr, Sm, Er, Tm) f-f line absorptions and emissions, as well as the charge transfer band of Sm{sup 3+} at about 3.3 eV. The energy level scheme containing the position of the 4f and 5d levels of all divalent and trivalent lanthanide ions with respect to the valence and conduction bands of CaZnOS has been constructed based on the new data presented in this work, together with the data from literature on Ce{sup 3+} and Eu{sup 2+} doping in CaZnOS. The detailed energy level scheme provides a platform for interpreting the optical spectra and could be used to comment on the valence stability of the lanthanide ions in CaZnOS.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Domain wall displacement by remote spin-current injection

We demonstrate numerically the ability to displace a magnetic domain wall (DW) by remote spin current injection. We consider a long and narrow magnetic nanostripe with a single DW. The spin-polarized current is injected perpendicularly to the film plane through a small nanocontact which is located at certain distance from the DW initial position. We show that the DW motion can be initiated not only by conventional spin-transfer torque but also by indirect spin-torque, created by remote spin-current injection and then transferred to the DW by the exchange-spring mechanism. An analytical description of this effect is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dissociation of diatomic molecules and the exact-exchange Kohn-Sham potential: The case of LiF

We examine the role of the exact-exchange (EXX) Kohn-Sham potential in curing the problem of fractional molecular dissociation. This is achieved by performing EXX calculations for the illustrative case of the LiF molecule. We show that by choosing the lowest-energy electronic configuration for each interatomic distance, a qualitatively correct binding energy curve, reflecting integer dissociation, is obtained. Surprisingly, for LiF this comes at the cost of violating the Aufbau principle, a phenomenon we discuss at length. Furthermore, we numerically confirm that in the EXX potential of the diatomic molecule, one of the atomic potentials is shifted by a constant while the other one is not, depending on where the highest occupied molecular orbital is localized. This changes the relative positions of the energies of each atom and enforces the integer configuration by preventing spurious charge transfer. The size of the constant shift becomes increasingly unstable numerically the larger the interatomic separation is, reflecting the increasing absence of coupling between the atoms.

74 ATOMIC AND MOLECULAR PHYSICS↗

Complete Non-Radioactive Operability Tests for Cladding Hull Chlorination

Non-radioactive operability tests were made to test the metal chlorination reactor and condenser and their accessories using batch chlorinations of non-radioactive cladding samples and to identify optimum operating practices and components that need further modifications prior to installation of the equipment into the hot cell for tests on actual used nuclear fuel (UNF) cladding. The operability tests included (1) modifications to provide the desired heating and reactor temperature profile; and (2) three batch chlorination tests using, respectively, 100, 250, and 500 g of cladding. During the batch chlorinations, metal corrosion of the equipment was assessed, pressurization of the gas inlet was examined and the best method for maintaining solid salt product transfer through the condenser was determined. Also, additional accessing equipment for collection of residual ash and positioning of the unit within the hot cell were identified, designed, and are being fabricated.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sodium heat pipe use in solar Stirling power conversion systems

Sodium heat pipes were selected for use as a thermal transport method in a focus-mounted, distributed concentrator solar Stirling power conversion system intended to produce 15-20 kWe per unit. Heat pipes were used both to receive thermal power in the solar receiver and to transmit it to a secondary heat pipe containing both latent heat salt (for up to 1.25 hours of thermal storage) and the heat exchanger of the Stirling engine. Experimental tests were performed on five solar receiver heat pipes with various internal wicking configurations. The performance of the heat pipes at various power levels and operating attitudes was investigated at temperatures near 1550 F; the unidirectional heat transfer in these heat pipes was demonstrated in normal operating attitudes and particularly in the inverted position required during overnight stowage of the concentrator.

Zimmerman, W. F.↗

A design procedure for active control of beam vibrations

The transverse vibrations of beams is discussed and a methodology for the design of an active damping device is given. The Bernoulli-Euler equation is used to derive a transcendental transfer function, which relates a torque applied at one end of the beam to the rotational position and velocity at that point. The active damping device consists of a wire, a linear actuator and a short torque arm attached to one end of the beam. The action of the actuator varies a tension in the wire and creates a torque which opposes the rotation of the beam and thus damps vibration. A design procedure for such an active damper is given. This procedure shows the relationships and trade-offs between the actuator stroke, power required, stress levels in the wire and beam and the geometry of the beam and wire. It is shown that by consideration of the frequency response at the beam natural frequencies, the aforementioned relationships can be greatly simplified. Similarly, a simple way of estimating the effective damping ratios and eigenvalue locations of actively controlled beams is presented.

Dickerson, S. L.↗

LANDSAT imagery of the Central Andes

The central Andes of South America extend from approximately 14 deg. S to 28 deg. S as an unbroken chain of mountains and volcanoes over 2000 km long. It is here that the Nazca plate dives under the South American plate at angles varying from 10 deg to 30 deg. Very little is known about the volcanoes comprising this classic, subduction-type plate margin. A catalogue of the volcanoes in the central Andes is being prepared by Dr. P.W. Francis and Dr. C.A. Wood at the NASA Lunar and Planetary Institute. At present, more than 800 volcanoes of Cenozoic age have been recognized in the chain, with an estimated 75-80 major, active Quarternary volcanoes. Approximately one hundred 1536 x 1536 pixel color composite Optronics positives were produced from six full LANDSAT Thermatic Mapper scenes and three partial TM scenes. These positives cover a large portion of the central Andes. The positives were produced from LANDSAT data using the VAX imaging package, LIPS. The scenes were first transferred from magnetic tape to disk. The LIPS package was then used to select volcanically interesting areas which were then electronically enhanced. Finally, the selected areas were transferred back to tape and printed on the Optronics equipment. The pictures are color composites using LANDSAT TM bands 7,4, and 2 in the red, green, and blue filters, respectively.

Komer, C. A.↗