Search NASA⌕ Search

SEARCH · Search NASA

Results for “Practical Application”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Spectral Properties and Possibilities of meso-Substituted BODIPY Usage in Sol–Gel Process and Materials

Hybrid materials based on organically modified silica with immobilized boron-dipyrrins (BODIPY) dyes were obtained. Spectral characteristics of the dyes were measured during the matrix formation and in obtained materials. It was stated, that immobilization does not affect the character of the absorption and fluorescence spectra of the dye, but due to the effect of fluorescent molecular rotor observed for meso-substituted BODIPY, the fluorescent quantum yields were found to increase during the matrix sealing. Quantum yield increase is linear for all of the investigated matrices except phenyl-substituted one, where the π-π interactions of the dye molecule with matrix could be observed. This effect could be used for fine control of the matrix formation process and leads to increase of the dye emission in the final material for further practical applications. All obtained hybrid materials were found to be stable upon UV light irradiation, hence immobilization enhance the stability of the dye in comparison with the BODIPY in organic solvents.

74 ATOMIC AND MOLECULAR PHYSICS↗

Investigation on the Influence of EVA Content on the Mechanical and Thermal Characteristics of Poly(lactic acid) Blends

Poly(lactic acid) (PLA) has gained considerable attention nowadays as a biocompatible polymer owing to its advantage of being prepared from renewable resources. PLA exhibits excellent tensile strength, fabricability, thermal plasticity and biocompatibility properties comparable to many petroleum based plastics. However, low heat distortion temperature, brittleness and slow crystallization rate limit the practical applications of PLA. In order to address these limitations, an attempt has been made in the current work to prepare binary blends of PLA with ethylene vinyl acetate (EVA) at different compositions via melt mixing technique. Systematic investigation on the mechanical properties, thermal degradation and crystallization behavior for PLA-EVA blends was carried out. The impact strength of binary blends of PLA–EVA was found to increase significantly by 176% for 15 wt% of EVA compared to virgin PLA. This is due to the strong interfacial adhesion among PLA and EVA resulting in brittle to ductile transition. Scanning electron microscopy analysis for impact fractured surfaces of binary blends of PLA implied the toughening effect of PLA by EVA. Thermogravimetry analysis results revealed that the activation energy of PLA–EVA blends decreased with increase in EVA content in the PLA matrix. While, differential scanning calorimetry results obtained for PLA–EVA blends revealed the improvement in crystallinity when compared with neat PLA. The effect of EVA on non-isothermal melt crystallization kinetics of PLA was also examined via DSC at various heating rates. Decreasing trend in the t{sub 1/2} values indicated the faster rate of crystallization mechanism after addition of EVA in the PLA matrix.

36 MATERIALS SCIENCE↗

Density Functional Study of Half-Metallic Ferromagnetism in the New Heusler Compounds CaYO{sub 2} (Y = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn)

The structural, electronic, and magnetic properties of full-Heusler alloys CaYO{sub 2} (Y = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) were investigated using full-potential linearized augmented plane wave method based on density functional theory. It was confirmed that these compounds can be synthesized experimentally due to their negative formation energies. The results predicted that all compounds in AlCu{sub 2}Mn-type structure were more stable than CuHg{sub 2}Ti-type structure. The band structure calculations showed that alloys CaYO{sub 2} (Y = Cr, Fe, Ni, and Cu) in AlCu{sub 2}Mn-type structure and CaYO{sub 2} (Y = Ti, V, Cr, Co, and Ni) in CuHg{sub 2}Ti-type structure have half metallic behavior. The origin of half-metallic characteristic was investigated using electronic density of states for CaFeO{sub 2}. Among these alloys, CaCrO{sub 2} was half-metal in a wide range of lattice constants indicating its resistance against destructive factors of half-metallicity such as temperature and pressure. The total magnetic moments for half-metallic alloys were integer values and obeyed the Slater-Pauling rules. The CaYO{sub 2} alloys with half-metallic character may be good candidates for practical applications in spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimization of FeSe Superconducting Tapes with Different Sheath Materials and Precursor Powders

FeSe superconducting tapes with different sheath materials of Nb/Cu composite, Ag, and Fe have been fabricated with a traditional in situ powder-in-tube (PIT) process, respectively. With the same cold working process and heat treatment, the influences of different sheath materials on the phase composition and microstructures of FeSe filaments have been analyzed. Due to the reaction between Nb-Se and Ag-Se, Nb{sub 2}Se and Ag{sub 2}Se particles can be clearly observed embedded in the filaments. Therefore, it is necessary to introduce a new method for the fabrication of Ag or Nb sheath FeSe wires in order to avoid the introduction of metal Fe in magnet system during practical applications. Based on our previous study, a high-energy ball milling process has been performed to achieve precursor powders with amorphous FeSe binary compound instead of elemental Se. The formation of Ag-Se compounds has been successfully avoided and the superconducting tapes with high superconducting FeSe critical temperature of 9.0 K have been obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Numerical Simulation of Phase Transitions in Type-II Annular Superconductor Using Time-dependent Ginzburg-Landau Equations

Time-dependent Ginzburg-Landau equations were solved by finite element method in two-dimensional space for order parameter and energy components of the annular superconducting sample in steady magnetic fields. Vortices preferred to penetrate from the inner surface of the annulus due to lesser energy required at the concave surface. A transition magnetic field strength was observed in spatial averages of carrier concentration and energy components, showing small bumps and abrupt variations, indicating phase transition from a non-vortex to vortex state. These effects were observed to repeat with every subsequent entry of a set of vortices into the sample; transition magnetic field strength was found to depend inversely on the annular width of the sample. The present work gives a better understanding of energy variations during phase transition from non-vortex to vortex state and predicts that vortex state can be avoided by tuning the wire thickness in practical applications, e.g., superconducting electromagnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of Electronic Structure, Magnetism, and Half-Metallicity of New Heusler Compounds CsTmO{sub 2} (Tm = Fe, Co, Ni, and Cu)

The density functional calculations were performed using the full-potential linearized augmented plane wave (FPLAPW) method for new Heusler alloys CsTmO{sub 2} (Tm = Fe, Co, Ni, and Cu). All compounds were stable in FM AlCu{sub 2}Mn-type structure. Results revealed that these alloys can be experimentally synthesized according to the calculated cohesive and formation energies. CsTmO{sub 2} (Tm = Fe, Co, Ni, and Cu) alloys in AlCu{sub 2}Mn-type and CuHg{sub 2}Ti-type structures were half-metallic ferromagnets. The origin of half-metallicity in CsNiO{sub 2} alloy was also discussed. The total magnetic moment of CsTmO{sub 2} (Tm = Fe, Co, Ni, and Cu) alloys in both structures were 3 μ{sub B} per formula unit and obeyed the Slater-Pauling rule (M{sub tot} = 22 − Z{sub tot}). The relationship between the magnetism and half-metallicity of all compounds and the lattice constants was also studied. The half-metallic character in combined alloys CsTmO{sub 2} (Tm = Fe, Co, Ni, and Cu) improved in comparison with Heusler alloys including transition metals which indicated that they may be good candidates for practical applications in spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Realization of Magnetostructural Transition and Magnetocaloric Properties of Ni–Mn–Mo–Sn Heusler Alloys

As magnetic cooling refrigerant, Ni–Mn–Sn Heusler alloys have gained significant potentials for a wide range of practical applications as compared with other expensive Ga-doped Ni–Mn based Heusler alloys, toxic As and P doped Mn-based alloys and rare-earth elements like Gd-based alloys. Consequently, an inclusive investigation on magnetostructural transition and magnetocaloric features of Ni{sub 43}Mn{sub 47−x}Mo{sub x}Sn{sub 10} alloys is carried out. The alloys are assembled through arc-melting technique and their X-ray diffraction analysis confirms their B{sub 2}-type crystal structure at room temperature. As the Mo contents are increased, the magnetostructural transition temperature increases for a temperature range between Curie temperature of austenite and martensite phases. Obvious metamagnetic behavior and magnetic hysteresis are observed in isothermal magnetization curves, suggesting that the temperature and magnetic field can be used as robust tools for tuning the structural transformation in Heusler alloys. The noticeable magnetocaloric effect suggests that the prepared alloys can be an attractive choice for magnetic refrigeration applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Prediction of Magnetocaloric Effect in La{sub 0.67}Pb{sub 0.33}(Mn{sub 1−x}Co{sub x})O{sub 3} Compounds (x = 0.01, 0.06, 0.1 and 0.15)

The magnetocaloric properties for the Co-doped La{sub 0.67}Pb{sub 0.33}(Mn{sub 1−x}Co{sub x})O{sub 3} samples with x= 0.01, 0.06, 0.1 and 0.15 under a 0.005 T magnetic field have been theoretically investigated and compared with experimental results. It has been found that the Co doping in this system decreases lightly the magnetocaloric properties. Moreover, the results of Co doping indicate that the magnetocaloric effect in this system is tunable, which is beneficial for manipulating magnetocaloric refrigeration that occurs in various temperature ranges. This makes the La{sub 0.67}Pb{sub 0.33}(Mn{sub 1−x}Co{sub x})O{sub 3} samples potential candidates for practical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of Substrate Temperature of Seed Layer on the Structure and Superconducting Property of BaHfO{sub 3}-Doped Y{sub 0.5}Gd{sub 0.5}Ba{sub 2}Cu{sub 3}O{sub 7−δ} Film Prepared by Pulsed Laser Deposition

For various practical applications, excellent superconducting properties under magnetic field of REBa{sub 2}Cu{sub 3}O{sub 7−δ} (RE = rare earth elements (REBCO))-coated conductors are required, which can be fabricated by introducing artificial pinning centers, such as second-phase dopant. It is well known that BaMO{sub 3} (M = Zr, Sn, or Hf) can form self-organized nanorods in REBCO matrix and improve the critical current density (J{sub c}) under applied magnetic field. However, with increasing dopant level, the critical temperature T{sub c} and J{sub c} at 77 K in self-field decreased. In order to inhibit the degradation of the J{sub c} in self-field, we fabricated 5 mol% BaHfO{sub 3} (BHO)-doped Y{sub 0.5}Gd{sub 0.5}Ba{sub 2}Cu{sub 3}O{sub 7−δ} (YGBCO) seed layers on CeO{sub 2}-buffered IBAD-MgO tapes by pulse laser deposition (PLD) at a laser repetition of 10 Hz and different substrate temperature T{sub seed}, and subsequently deposited 5-mol% BHO-doped YGBCO upper layers at 160 Hz and higher substrate temperature. The effect of T{sub seed} on the quality of the 5-mol% BHO-doped YGBCO upper layer was investigated. With increasing T{sub seed} from 710 to 820 {sup ∘}C, the Δφ value of YGBCO (103) reflection first decreased and then increased, while the J{sub c} at 77 K increased with increasing T{sub seed} to 790 {sup ∘}C and decreased at higher T{sub seed}. The 5-mol% BHO-doped YGBCO layer with a seed layer deposited at 790 {sup ∘}C had the highest J{sub c} (77 K, self-field) of 4.0 MA/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulation of the Magnetocaloric Effect in Sr{sub 2−x}Gd{sub x}FeMoO{sub 6} (0 ≤ x ≤ 0.25)

The magnetocaloric properties for double perovskite oxides Sr{sub 2−x}Gd{sub x}FeMoO{sub 6} with x = 0, 0.06, 0.1, 0.15, 0.2, and 0.25 under 0.05 T magnetic field have been theoretically investigated by using a phenomenological model. It has been noted that the Gd doping in this system decreases the magnetocaloric effect. However, magnetic properties in these systems are tunable for manipulating magnetocaloric refrigeration that occurs in various temperature ranges. This stimulates the Sr{sub 2−x}Gd{sub x}FeMoO{sub 6} samples as recommended for practical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Realization of Wideband Magnetoelectric Response Utilizing Three-Phase Particulate Ceramics

This paper is aimed at acquiring functional ceramics with broadband magnetoelectric (ME) response for sensing wide-range of dc bias magnetic field. Three-phase particulate ceramics CoFe{sub 2}O{sub 4}/Ni{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4}/Bi{sub 0.5}Na{sub 0.4}K{sub 0.1}TiO{sub 3} (CFO/NZFO/BNKT) were fabricated, and the effect of magnetostrictive phase on the piezoelectric, magnetic, and ME properties were investigated systematically. Separated phases and homogeneous microstructure of the magnetostrictive and piezoelectric phases were confirmed. The variation in magnetostrictive coefficient with dc magnetic field was found to be markedly dependent on the relative content of magnetostrictive microparticles. By merging the nonlinear piezomagnetic response of the two ferrite components together, the ME composites present dual-peak bands. A wide-range ME coefficient was achieved over a magnetic range of 1800 Oe with large ME value of 20 mV/cm Oe. This field-conversion broadband ME behavior indicates that three-phase particulate ME ceramics are quite preferable for practical applications in magnetic field sensor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

D-Guaranteed Discrimination of Statistical Hypotheses: a Review of Results and Unsolved Problems

We compare two sequential d-guaranteed tests and an optimal d-guaranteed test based on a fixed number of observations with respect to the average number of observations within the most accepted practical applications of Bayesian probabilistic models. We consider the sequential “first skipping” test, the sequential locally efficient test based on the score statistic, and the test based on a fixed number of observations that minimizes the necessary sample size. We study various characteristics of these tests connected with the number of observations within three probabilistic models, namely, the normal (ϑ, σ{sup 2}) distribution of the observed random variable and the normal a priori distribution of ϑ with fixed σ{sup 2}; the exponential distribution with the intensity parameter ϑ and the a priori gamma distribution of ϑ; and the Bernoulli sampling with the success probability ϑ and the a priori beta distribution of ϑ. We discuss the connection of the d-posterior approach with the compound decision problem as applied to the analysis of data provided by microchips (when the false discovery rate, or FDR, for short, is treated as the d-risk of the first kind). We present the vast data on characteristics of the mentioned tests obtained by the method of mathematical modeling in several tables. We discuss unsolved problems of the d-guaranteed discrimination of hypotheses with the minimal number of observations and approaches to their solution.

97 MATHEMATICS AND COMPUTING↗

Broadband LWIR and MWIR absorber by trapezoid multilayered grating and SiO{sub 2} hybrid structures

A broadband metamaterial absorber with high absorption simultaneously in mid-wave infrared (MWIR) and long-wave infrared (LWIR) was proposed. In the MWIR, the absorption higher than 0.8 is from 4 to 6.3 µm, while the absorption in the LWIR is from 8.7 and 9.6 µm. The absorber is insensitive to the incident angle. The broadband absorption in the MWIR is due to the slow-light effect of the trapezoid multilayered grating structure. And the broadband absorption in the LWIR is due to the phonon polariton resonant of trapezoid SiO{sub 2} layer. In the broadband high absorption region, the atmosphere is transparent, which may greatly promote the practical application of the absorber in double-color IR imaging, detecting, infrared stealth and thermal emitting.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultrafast all-optical digital comparator using quantum-dot semiconductor optical amplifiers

In this investigation, three types of 160 Gb/s all-optical digital comparators using quantum-dot semiconductor optical amplifiers (QD-SOAs) are constructed. These configurations have different combination patterns of logic gates and QD-SOAs. Based on numerical simulations, we investigate and evaluate the performance of the devices in terms of the number of logic gates and QD-SOAs, and the value of the extinction ratio (ER). In addition, we demonstrate the effect of amplified spontaneous emission (ASE) noise on the ER and Q-factor. The results show that two of the three configurations are superior to the other configuration in terms of circuit complexity, value of ER, and sensitivity to injection current. Moreover, these two configurations achieve ER values over 10 dB and Q-factor over 9, even when intense ASE noise is considered. The proposed configurations have several advantages such as high quality, easy configuration, insensitivity to injection current, and strong noise robustness, which are favorable for practical applications. This investigation also facilitates the specification of the pros and cons of each configuration, and the determination of the appropriate comparator according to the desired requirements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quasi photonic crystal fiber for chemical sensing purpose in the terahertz regime: design and analysis

In this work, a novel quasi-photonic crystal fiber has been proposed, for the first time, in the chemical sensing purpose in the terahertz (THz) regime. Along with the sensing response, power fraction, scattering loss, effective mode area, and V parameter have been numerically computed by the full-vector finite element method with anisotropic circular perfect matched layers. Numerically computed results show that the proposed sensor offers 70.94%, 71.06%, and 72.19% sensing responses for targeted analytes water, ethanol, and benzene respectively at the optical frequency f = 1 THz. Besides, effective mode area of 1.43 × 10{sup 5} µm{sup 2}, 1.48 × 10{sup 5} µm{sup 2} and 1.55 × 10{sup 5} µm{sup 2} have found at the same time for the same analytes. The Q-PCF model proposed in this paper have bright aspects for practical applications in clinical and diagnostic sensing, medical imaging, environmental monitoring purpose and many other fields related to it.

36 MATERIALS SCIENCE↗

A simple design of highly birefringent and nonlinear photonic crystal fiber with ultra-flattened dispersion

We present a compressed hexagonal photonic crystal fiber (CH-PCF) based on a simple structure with ultra-flattened dispersion, high birefringence and nonlinearity. The propagation characteristics are studied accurately by utilizing full vector finite-element method (FEM). Numerical results indicate that the birefringence of 1.59 × 10{sup −2} was obtained with high nonlinear coefficient of 42.58 W{sup −1} km{sup −1}(X) and 52.80 W{sup −1} km{sup −1}(Y) at an effective wavelength of 1.55 μm. Furthermore, CH-PCF presents an ultra-flattened dispersion with variation of ± 3.4 ps/nm/km(X) and ± 1.6 ps/nm/km(Y) over 1.3 μm to 1.8 μm (0.5 μm bandwidth), respectively. In addition, this circular-hole structure can be fabricated conveniently at most easy compared with complex designs, which is an advantage for practical applications such as dispersion compensation and nonlinear optics application.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

LandScan HD: a high-resolution gridded ambient population methodology for the world

Unwarned population distributions accounting for routine human activities are needed to address many global human security challenges, including disasters, conflict, and infrastructure demand. LandScan High Definition (LSHD) supports this need through gridded ambient population estimates that measure average human presence between daytime and nighttime at a high spatial resolution of 3 arcseconds (approximately 90 m). Although LSHD has traditionally been produced on a country-specific basis, advances in global foundational data and computational resources now enable scaling its methodology to the world. Combining aspects of top-down and bottom-up gridded population methods, LSHD allocates subnational population totals from authoritative statistics to built-up areas based on occupancy estimates for multiple facility types (e.g., residential, commercial) and then reaggregates these estimates to a global population grid. We scale this approach by organizing the LSHD data stack into a 1° resolution tileset of vector analytic features, enabling an efficient and repeatable workflow for all countries worldwide. Examining the Philippines as an output of the global LSHD baseline dataset, we contrast unwarned and residential (WorldPop) population distributions by (1) exploring a practical application of flood risk assessment and (2) evaluating their congruence with outcomes of collective human activities (subnational CO 2 emissions). Finally, we discuss plans to address current LSHD limitations through data/modeling and uncertainty quantification improvements and provide outlook for workflow automation and extending the model to social, demographic and economic population characteristics.

Building morphology↗

Calculations of interaction energy between certain components of large multimolecular complexes

A scheme is proposed for calculating the energies of interaction between certain components of large multimolecular systems. These energies are used to model the binding and extraction of metal ions and metal complexes in solutions. The procedure can be extended with ease to calculate the energies of interaction between any two components of an arbitrary polyatomic system. Practical application of the scheme is illustrated taking actinide binding by different sorbents in solutions as examples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗