Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rigidity function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Comparison of Dynamic Characteristics for an Inflatable Solar Concentrator in Atmospheric and Thermal Vacuum Conditions

Dynamic testing of an inflatable solar concentrator structure in a thermal vacuum chamber as well as in ambient laboratory conditions is described in detail. Unique aspects of modal testing for the extremely lightweight inflatable are identified, including the use of a noncontacting laser vibrometer measurement system. For the thermal vacuum environment, mode shapes and frequency response functions are compared for three different test article inflation pressures at room temperature. Modes that persist through all the inflation pressure regimes are identified, as well as modes that are unique for each pressure. In atmospheric pressure and room temperature conditions, dynamic measurements were obtained for the expected operational inflation pressure of 0.5 psig. Experimental mode shapes and frequency response functions for ambient conditions are described and compared to the 0.5 psig results from the thermal vacuum tests. Only a few mode shapes were identified that occurred in both vacuum and atmospheric environments. This somewhat surprising result is discussed in detail, and attributed at least partly to 1.) large differences in modal damping, and 2.) significant differences in the mass of air contained by the structure, in the two environments. Results of this investigation point out the necessity of testing inflatable space structures in vacuum conditions before they can be launched. Ground testing in atmospheric pressure is not sufficient for predicting on-orbit dynamics of non-rigidized inflatable systems.

Slade, Kara N.↗
NASA NTRS1972

Dynamic Nonlinear Elastic Stability of Helicopter Rotor Blades in Hover and in Forward Flight

Equations for large coupled flap-lag motion of hingeless elastic helicopter blades are consistently derived. Only torsionally-rigid blades excited by quasi-steady aerodynamic loads are considered. The nonlinear equations of motion in the time and space variables are reduced to a system of coupled nonlinear ordinary differential equations with periodic coefficients, using Galerkin's method for the space variables. The nonlinearities present in the equations are those arising from the inclusion of moderately large deflections in the inertia and aerodynamic loading terms. The resulting system of nonlinear equations has been solved, using an asymptotic expansion procedure in multiple time scales. The stability boundaries, amplitudes of nonlinear response, and conditions for existence of limit cycles are obtained analytically. Thus, the different roles played by the forcing function, parametric excitation, and nonlinear coupling in affecting the solution can be easily identified, and the basic physical mechanism of coupled flap-lag response becomes clear. The effect of forward flight is obtained with the requirement of trimmed flight at fixed values of the thrust coefficient.

Friedmann, P.↗
NASA NTRS1993

Sound radiation due to boundary layer transition

This report describes progress made to date towards calculations of noise produced by the laminar-turbulence transition process in a low Mach number boundary layer formed on a rigid wall. The primary objectives of the study are to elucidate the physical mechanisms by which acoustic waves are generated, to clarify the roles of the fluctuating Reynolds stress and the viscous stress in the presence of a solid surface, and to determine the relative efficiency as a noise source of the various transition stages. In particular, we will examine the acoustic characteristics and directivity associated with three-dimensional instability waves, the detached high-shear layer, and turbulent spots following a laminar breakdown. Additionally, attention will be paid to the unsteady surface pressures during the transition, which provide a source of flow noise as well as a forcing function for wall vibration in both aeronautical and marine applications.

Wang, Meng↗
DOE OSTI2021

Operation of Natural Gas Pipeline Networks With Storage Under Transient Flow Conditions

Here, we formulate a nonlinear optimal control problem for intraday operation of a natural gas pipeline network that includes storage reservoirs. The dynamics of compressible gas flow through pipes, compressors, reservoirs, and wells are considered. In particular, a reservoir is modeled as a rigid, hollow container that stores gas under isothermal conditions and uniform density, and a well is modeled as a vertical pipe. For each pipe, flow dynamics are described by a coupled partial differential equation (PDE) system in density and mass flux variables, with momentum dissipation modeled using the Darcy–Wiesbach friction approximation. Compressors are modeled as scaling up the pressure of gas between the inlet and outlet. The governing equations for all network components are spatially discretized and assembled into a nonlinear differential-algebraic equation (DAE) system, which synthesizes above-ground pipeline and subsurface reservoir dynamics into a single reduced-order model. We seek to maximize an objective function that quantifies economic profit and network efficiency subject to the flow equations and inequalities that represent operating limitations. The problem is solved using a primal–dual interior point solver, and the solutions are validated in computational experiments and simulations on several pipeline test networks to demonstrate the effectiveness of the proposed methodology.

03 NATURAL GAS↗
DOE OSTI2026

Uniting Theory and Experiment to Deliver Flexible MOFS for Superior Methane (NG) Storage

The objective of the project was to use previous insights developed through synthesis and quantitative modeling of rigid metal–organic frameworks (MOFs) in an established synergistic theoretical/experimental team to create, modify, and evaluate flexible MOFs (FlexMOFs) for natural gas (NG) storage and release at practically useful pressures and transform the NG storage economy. The goal was reduced pressure absorbed natural gas (ANG) FlexMOF storage at operating pressures less than 100 bar with physisorption exploiting the favorable thermodynamics and kinetics of flexible porous material opening in response to adsorption. Hydrogen behavior in this context was also considered. The specific aim of the project was to design and develop a standard computational modeling methodology for, first, detailed atomistic retrodiction of FlexMOF gating behavior and ultimately prediction of the effects of functionalization and/or substitution on structural transitioning. The project was also geared towards the establishment of the interaction of methane with the framework and binding sites using modeling and the FlexMOF will be both internally and external validated as a SMART metric. This has value to the scientific community both from the obvious standpoint of providing a better understanding of the promising test case systems (CdIF-13 and the MIL-53(Al) series of MOFs), but also in providing an avenue of obtaining insight into these FlexMOF systems in general, which is of particular interest given the tendency of structure-function correlation to lag behind synthesis methodology (making the latter a hit or miss proposition for applications). This gap remains significant for FlexMOF systems whose gate opening behaviors complicate computational examination. The computational methodologies are relatively inexpensive in terms of both money and computational resources enhancing the general viability of these methodologies. The ultimate gain to the public will be in the application of these techniques to design systems for natural gas storage and use to cut down on green-house emissions.

03 NATURAL GAS↗
NASA NTRS2010

NASA Tech Briefs, July 2010

Topics covered include: Wirelessly Interrogated Wear or Temperature Sensors; Processing Nanostructured Sensors Using Microfabrication Techniques; Optical Pointing Sensor; Radio-Frequency Tank Eigenmode Sensor for Propellant Quantity Gauging; High-Temperature Optical Sensor; Integral Battery Power Limiting Circuit for Intrinsically Safe Applications; Configurable Multi-Purpose Processor; Squeezing Alters Frequency Tuning of WGM Optical Resonator; Automated Computer Access Request System; Range Safety for an Autonomous Flight Safety System; Fast and Easy Searching of Files in Unisys 2200 Computers; Parachute Drag Model; Evolutionary Scheduler for the Deep Space Network; Modular Habitats Comprising Rigid and Inflatable Modules; More About N2O-Based Propulsion and Breathable-Gas Systems; Ultrasonic/Sonic Rotary-Hammer Drills; Miniature Piezoelectric Shaker for Distribution of Unconsolidated Samples to Instrument Cells; Lunar Soil Particle Separator; Advanced Aerobots for Scientific Exploration; Miniature Bioreactor System for Long-Term Cell Culture; Electrochemical Detection of Multiple Bioprocess Analytes; Fabrication and Modification of Nanoporous Silicon Particles; High-Altitude Hydration System; Photon Counting Using Edge-Detection Algorithm; Holographic Vortex Coronagraph; Optical Structural Health Monitoring Device; Fuel-Cell Power Source Based on Onboard Rocket Propellants; Polar Lunar Regions: Exploiting Natural and Augmented Thermal Environments; Simultaneous Spectral Temporal Adaptive Raman Spectrometer - SSTARS; Improved Speed and Functionality of a 580-GHz Imaging Radar; Bolometric Device Based on Fluxoid Quantization; Algorithms for Learning Preferences for Sets of Objects; Model for Simulating a Spiral Software-Development Process; Algorithm That Synthesizes Other Algorithms for Hashing; Algorithms for High-Speed Noninvasive Eye-Tracking System; and Adapting ASPEN for Orbital Express.

Source record↗
DOE OSTI2020

Covalently Linked, Two-Dimensional Quantum Dot Assemblies

Using nanoscale building blocks to construct hierarchical materials is a radical new branch point in materials discovery that promises new structures and emergent functionality. Understanding the design principles that govern nanoparticle assembly is critical to moving this field forward. By exploiting mixed ligand environments to target patchy nanoparticle surfaces, we have demonstrated a novel method of colloidal quantum dot (QD) assembly that gives rise to 2D structures. The equilibration of solutions of spherical and quasispherical QDs, including CdS, CdSe, and InP, with 2,2'-bipyridine-5,5'-diacrylic acid resulted in the preferential formation of 2D assemblies over the course of days as determined by transmission electron microscopy analysis. Small-angle X-ray scattering confirms the existence of the QD assemblies in solution. The dependence of the assembly on linker properties (length and rigidity), linker concentration, and total concentration was investigated, together with the data point to a mechanism involving ligand redistribution to create a patchy surface that maximizes the steric repulsion of neighboring QDs. By operating in an underexchanged regime, the arising patchiness results in enthalpically preferred directions of cross-linking that can be accessed by thermal equilibration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

All‐Liquid Reconfigurable Electronics Using Jammed MXene Interfaces

Abstract Rigid, solid‐state components represent the current paradigm for electronic systems, but they lack post‐production reconfigurability and pose ever‐increasing challenges to efficient end‐of‐life recycling. Liquid electronics may overcome these limitations by offering flexible in‐the‐field redesign and separation at end‐of‐life via simple liquid phase chemistries. Up to now, preliminary work on liquid electronics has focused on liquid metal components, but these devices still require an encapsulating polymer and typically use alloys of rare elements like indium. Here, using the self‐assembly of jammed 2D titanium carbide (Ti 3 C 2 T x ) MXene nanoparticles at liquid–liquid interfaces, “all‐liquid” electrically conductive sheets, wires, and simple functional devices are described including electromechanical switches and photodetectors. These assemblies combine the high conductivity of MXene nanosheets with the controllable form and reconfigurability of structured liquids. Such configurations can have applications not only in electronics, but also in catalysis and microfluidics, especially in systems where the product and substrate have affinity for solvents of differing polarity.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Production of β-ketoadipic acid from glucose in Pseudomonas putida KT2440 for use in performance-advantaged nylons

Biomass-derived chemicals can offer unique chemical functionality relative to petroleum-derived building blocks. To this end, here we report that β-ketoadipic acid (βKA), a C6 diacid with a β-ketone group, can be used as a performance-advantaged replacement for adipic acid in a nylon-6,6 analog. Building on our previous efforts to produce shikimate-derived products from carbohydrates, Pseudomonas putida KT2440 is engineered to produce βKA from glucose, achieving a 26 g/L titer. Following purification, βKA imparts an increase of 69 degrees C above the nylon-6,6 glass transition temperature and 20% reduced water permeability, equivalent to nylon-6,10. Molecular simulations predict that the enhanced thermal properties result from rigidity introduced by the β-ketone. Process analysis predicts that βKA can be produced for US$1.94/kg from sugars, requiring 63% less energy and emitting 43% less greenhouse gases than fossil-based adipic acid. Overall, this study illustrates the potential for βKA to serve as a useful building block for bio-based polymers.

09 BIOMASS FUELS↗
DOE OSTI2018

A Biophysical Perspective on Enzyme Catalysis

According to the article, even after a century of investigation, our understanding of how enzymes work remains far from complete. In particular, several factors that enable enzymes to achieve high catalytic efficiencies remain only poorly understood. A number of theories have been developed, which propose or reaffirm that enzymes work as structural scaffolds, serving to bring together and properly orient the participants so that the reaction can proceed; therefore, leading to enzymes being viewed as only passive participants in the catalyzed reaction. A growing body of evidence shows that enzymes are not rigid structures but are constantly undergoing a wide range of internal motions and conformational fluctuations. In this Perspective, on the basis of studies from our group, we discuss the emerging biophysical model of enzyme catalysis that provides a detailed understanding of the interconnection among internal protein motions, conformational substates, enzyme mechanisms, and the catalytic efficiency of enzymes. For a number of enzymes, networks of conserved residues that extend from the surface of the enzyme all the way to the active site have been discovered. These networks are hypothesized to serve as pathways of energy transfer that enables thermodynamical coupling of the surrounding solvent with enzyme catalysis and play a role in promoting enzyme function. Additionally, the role of enzyme structure and electrostatic effects has been well acknowledged for quite some time. Collectively, the recent knowledge gained about enzyme mechanisms suggests that the conventional paradigm of enzyme structure encoding function is incomplete and needs to be extended to structure encodes dynamics, and together these enzyme features encode function including catalytic rate acceleration.

Biochemistry & Molecular Biology↗
DOE OSTI2020

A Comfort Model Simplification for Tight Integration with Grid Service Optimizations

Localized generation, storage, and intelligent power electronics are increasingly being integrated into building. The excess storage, thermal, and generation capacity can be used to develop new markets for ancillary services such as peak reduction, voltage and frequency support, or load flattening. Widespread participation in these markets will make the power grid more resilient. However, widespread participation in these markets will require a simple and intuitive control over the excess capacity by the building occupants. Most importantly for adopting these technologies, participation in these markets should not require sacrificing occupant comfort. Many of the proposed control and optimization technologies for supplying the ancillary services do not explicitly incorporate occupant comfort into their models and when they do, generally utilize a rigid constraint on the indoor air temperature set a priori. This reduces flexibility in using excess thermal capacity. It also cannot take into account uncertainties in local factors that affect thermal comfort such as clothing insulation or relative humidity. In this paper we present and justify some assumptions that simplify the standard predictors of thermal comfort. We also develop a regression model of the thermal comfort that is linear with respect to the indoor air temperature. Next we develop the concept of thermal comfort variation that eliminates the dependence of the thermal comfort on uncertain thermal comfort factors. Then, we present a quadratic program utilizing the thermal comfort variation in both the objective function and as a constraint. Finally, we show the results of a time-of-use cost optimization that utilizes the simplified thermal comfort model.

Melin, Alexander↗
DOE OSTI2020

Smoothed Retarded Potentials and Fields

This note will follow the derivation of the Liénard–Wiechert potentials for a moving charge, which give the entire electromagnetic field generated by that charge including time delays, while concurrently deriving a version for a smoothed charge. The smoothed charge replaces the delta function charge density ρ ∝ δ 3 (x) by a spherically symmetric function f(|x|), so instead of a potential φ ∝ 1/ |x| for a charge at rest, the potential will be the 3D convolution of f with 1/ |x|. The smoothing will be defined in the ‘laboratory frame’ rather than the rest frame of the particle. If a spherically-symmetric distribution is required in a different rest frame, for example the averaged rest frame of a whole particle beam, the particle histories may be Lorentz boosted and the resulting fields Lorentz boosted back. Another motivation for using the lab frame is that if a beam is uniformly accelerated by an electric field, it maintains its lab frame size, rather than shrinking as a rigid object would (if the beam enters an electric field from the side, the particles maintain their time separation and the length actually increases with the beam velocity). Properly defining a charge distribution of fixed size in the changing reference frame of an accelerating particle is somewhat complicated and relates to the concept of Born rigidity.

43 PARTICLE ACCELERATORS↗
NASA NTRS1980

Aerodynamic coefficients in generalized unsteady thin airfoil theory

Two cases are considered: (1) rigid body motion of an airfoil-flap combination consisting of vertical translation of given amplitude, rotation of given amplitude about a specified axis, and rotation of given amplitude of the control surface alone about its hinge; the upwash for this problem is defined mathematically; and (2) sinusoidal gust of given amplitude and wave number, for which the upwash is defined mathematically. Simple universal formulas are presented for the most important aerodynamic coefficients in unsteady thin airfoil theory. The lift and moment induced by a generalized gust are evaluated explicitly in terms of the gust wavelength. Similarly, in the control surface problem, the lift, moment, and hinge moments are given as explicit algebraic functions of hinge location. These results can be used together with any of the standard numerical inversion routines for the elementary loads (pitch and heave).

Williams, M. H.↗
NASA NTRS1986

Ceramic-ceramic shell tile thermal protection system and method thereof

A ceramic reusable, externally applied composite thermal protection system (TPS) is proposed. The system functions by utilizing a ceramic/ceramic upper shell structure which effectively separates its primary functions as a thermal insulator and as a load carrier to transmit loads to the cold structure. The composite tile system also prevents impact damage to the atmospheric entry vehicle thermal protection system. The composite tile comprises a structurally strong upper ceramic/ceramic shell manufactured from ceramic fibers and ceramic matrix meeting the thermal and structural requirements of a tile used on a re-entry aerospace vehicle. In addition, a lightweight high temperature ceramic lower temperature base tile is used. The upper shell and lower tile are attached by means effective to withstand the extreme temperatures (3000 to 3200F) and stress conditions. The composite tile may include one or more layers of variable density rigid or flexible thermal insulation. The assembly of the overall tile is facilitated by two or more locking mechanisms on opposing sides of the overall tile assembly. The assembly may occur subsequent to the installation of the lower shell tile on the spacecraft structural skin.

Riccitiello, Salvatore R.↗
NASA NTRS2005

DSMC Simulations of Ballute Aerothermodynamics Under Hypersonic Rarefied Conditions

This paper presents computational results obtained with the direct simulation Monte Carlo (DSMC) method for towed ballute applications. A ballute is an inflatable drag device that can be used to create a large amount of drag at high altitudes. Consequently, ballutes provide a potential technology for achieving aerocapture when the primary spacecraft velocity reduction (ΔV) is achieved at much higher altitudes than with the conventional rigid aeroshell. Since the ΔV is achieved at relatively high altitudes, rarefaction can be significant and is the motivation for the current study with the DSMC method. Computed surface and flow-field results are presented for a toroidal ballute, isolated tethers when exposed to free-stream flow conditions, and the flow interactions resulting from a toroidal ballute when towed by a six meter diameter Mars Pathfinder shaped (without tethers) spacecraft. All results presented are for Earth entry at velocities of 14 to 7 km/s (primary focus is at 8.55 km/s, same as some previous Titan aerocapture studies) and altitudes of 200 to 100 km. Variations of drag and heating coefficients as a function of rarefaction are presented. A description of the flow structure is provided and also an explanation of how it is affected by shock interactions produced solely by the ballute and those resulting from the two body combination of towed ballute and spacecraft is also given.

James N Moss↗
DOE OSTI2026

Computationally designed coiled coil ‘bundlemers’ as model colloidal nanoparticles for solution assembly and materials design (Final Report)

As a collaborative team at the University of Delaware and the University of Pennsylvania, Kloxin, Pochan and Saven designed new biomimetic nanomaterials de novo, leveraging a variety of complementary areas of expertise: computational design of biopolymers (Saven at the University of Pennsylvania), and synthesis and characterization (Kloxin and Pochan at the University of Delaware). Overall activities included: sequence-specific peptide synthesis; covalent crosslinking; noncovalent assembly; site-specific functionalization; and nanostructural characterization using electron microscopy and solution-phase (x-ray and neutron) scattering. Using natural and non-natural amino acids, the team created modular, functional peptide building blocks for elaboration of new nanostructured materials. Ultimately, the development of robust peptide-based, building blocks provides tools for researchers to readily produce complex nanomaterial structures in a wide range of applications. The project had three, interconnecting goals in an effort to provide the broader scientific community with a new peptide-based paradigm for materials design and characterization. First, we further developed the coiled-coil bundle-based toolbox (otherwise known as the ‘bundlemer’ toolbox) via computational design with experimental bundle assembly verification. Second, we developed new uses of covalent interactions, in addition to desired physical (noncovalent) interactions, to assemble bundlemers into 1-D polymer chains with targeted chain rigidity, length, and dispersity. Thirds, we used the above designs to experimentally realize (physical or covalent) polymers to target the creation of liquid crystals or to realize interparticle assembly into nanoporous lattices. The close integration of the three groups was instrumental in success of the biomolecular materials design, formation, and understanding for future designs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Subtle Molecular Changes Largely Modulate Chiral Helical Assemblies of Achiral Conjugated Polymers by Tuning Solution-State Aggregation

Understanding the solution-state aggregate structure and the consequent hierarchical assembly of conjugated polymers is crucial for controlling multiscale morphologies during solid thin-film deposition and the resultant electronic properties. However, it remains challenging to comprehend detailed solution aggregate structures of conjugated polymers, let alone their chiral assembly due to the complex aggregation behavior. Herein, we present solution-state aggregate structures and their impact on hierarchical chiral helical assembly using an achiral diketopyrrolopyrrole-quaterthiophene (DPP-T4) copolymer and its two close structural analogues wherein the bithiophene is functionalized with methyl groups (DPP-T2M2) or fluorine atoms (DPP-T2F2). Combining in-depth small-angle X-ray scattering analysis with various microscopic solution imaging techniques, we find distinct aggregate in each DPP solution: (i) semicrystalline 1D fiber aggregates of DPP-T2F2 with a strongly bound internal structure, (ii) semicrystalline 1D fiber aggregates of DPP-T2M2 with a weakly bound internal structure, and (iii) highly crystalline 2D sheet aggregates of DPP-T4. These nanoscopic aggregates develop into lyotropic chiral helical liquid crystal (LC) mesophases at high solution concentrations. Intriguingly, the dimensionality of solution aggregates largely modulates hierarchical chiral helical pitches across nanoscopic to micrometer scales, with the more rigid 2D sheet aggregate of DPP-T4 creating much larger pitch length than the more flexible 1D fiber aggregates. Combining relatively small helical pitch with long-range order, the striped twist-bent mesophase of DPP-T2F2 composed of highly ordered, more rigid 1D fiber aggregate exhibits an anisotropic dissymmetry factor (g-factor) as high as 0.09. This study can be a prominent addition to our knowledge on a solution-state hierarchical assembly of conjugated polymers and, in particular, chiral helical assembly of achiral organic semiconductors that can catalyze an emerging field of chiral (opto)electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reconfigurable Magnetic Liquid Building Blocks for Constructing Artificial Spinal Column Tissues

All-liquid molding can be used to transform a liquid into free-form solid constructs, while maintaining internal fluidity. Traditional biological scaffolds, such as cured pre-gels, are normally processed in solid state, sacrificing flowability and permeability. However, it is essential to maintain the fluidity of the scaffold to truly mimic the complexity and heterogeneity of natural human tissues. Here, this work molds an aqueous biomaterial ink into liquid building blocks with rigid shapes while preserving internal fluidity. The molded ink blocks for bone-like vertebrae and cartilaginous-intervertebral-disc shapes, are magnetically manipulated to assemble into hierarchical structures as a scaffold for subsequent spinal column tissue growth. It is also possible to join separate ink blocks by interfacial coalescence, different from bridging solid blocks by interfacial fixation. Generally, aqueous biomaterial inks are molded into shapes with high fidelity by the interfacial jamming of alginate surfactants. The molded liquid blocks can be reconfigured using induced magnetic dipoles, that dictated the magnetic assembly behavior of liquid blocks. The implanted spinal column tissue exhibits a biocompatibility based on in vitro seeding and in vivo cultivating results, showing potential physiological function such as bending of the spinal column.

60 APPLIED LIFE SCIENCES↗