Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS RELAXATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Incorporation of indium on cubic GaN epitaxially induced on a nanofaceted Si(001) substrate by phase transition

Here, the incorporation of In on the non-polar, piezoelectric-free (001) facet of cubic (c-) GaN epitaxially grown over a Si(001) substrate by metal-organic vapor phase epitaxy is reported. Relying on a hexagonal (h-) to c-phase transformation during epitaxy on an 800 nm-wide, Si(111)-faceted v-groove patterned into the substrate, the GaN epilayer at cross sectional view retains a triangular c-phase inside a chevron-shaped h-phase that results in a top surface bounded by a (001) facet parallel to Si(001) at the center and (11¯01) facets at both edges. A stack of five, ~3 nm-thick, In x Ga 1–x N/GaN quantum wells (QWs) was deposited on the double-phased top surface. The c-phase region up to the QWs keeps extremely small misfit (~0.002) to the fully relaxed h-GaN underneath it and is in tensile stress implying undefected by the h-c phase interface. Lastly, the In incorporation on a strained non-polar (001) of c-GaN is comparable with that on totally relaxed semi-polar (11¯01) of h-GaN without noticeable adatom migration across the phase boundary, and sufficient to provide the room-temperature green emission at 496 nm from the c-In x Ga 1–x N/GaN QWs on Si(001) in photoluminescence.

36 MATERIALS SCIENCE↗

Glucocorticoid-induced skeletal muscle atrophy in vitro is attenuated by mechanical stimulation

Glucocorticoids induce rapid atrophy of fast skeletal myofibers in vivo, and either weight lifting or endurance exercise reduces this atrophy by unknown mechanisms. We examined the effects of the synthetic glucocorticoid dexamethasone (Dex) on protein turnover in tissue-cultured avian fast skeletal myofibers and determined whether repetitive mechanical stretch altered the myofiber response to Dex. In static cultures after 3-5 days, 10(-8) M Dex decreased total protein content 42-74%, total protein synthesis rates 38-56%, mean myofiber diameter 35%, myosin heavy chain (MHC) content 86%, MHC synthesis rate 44%, and fibronectin synthesis rate 29%. Repetitive 10% stretch-relaxations of the cultured myofibers for 60 s every 5 min for 3-4 days prevented 52% of the Dex-induced decrease in protein content, 42% of the decrease in total protein synthesis rate, 77% of the decrease in MHC content, 42% of the decrease in MHC synthesis rate, and 67% of the decrease in fibronectin synthesis rate. This in vitro model system will complement in vivo studies in understanding the mechanism by which mechanical activity and glucocorticoids interact to regulate skeletal muscle growth.

Non-NASA Center↗

Time-strain separability in medium-amplitude oscillatory shear

Here, we derive and study equations for the weakly nonlinear medium-amplitude oscillatory shear (MAOS) response of materials exhibiting time-strain separability. Results apply to constitutive models with arbitrary linear memory function $\textit{m}$(s) and for both viscoelastic liquids and viscoelastic solids. The derived equations serve as a reference to identify which models are time-strain separable (TSS) and which may appear separable but are not, in the weakly nonlinear limit. More importantly, we study how the linear viscoelastic (LVE) relaxation spectrum, H($_\tau$), affects the frequency dependence of the TSS MAOS material functions. Continuous relaxation spectra are considered that are associated with analytical functions (log-normal and asymmetric Lorentzian distributions), fractional mechanical models (Maxwell and Zener), and molecular theories (Rouse and Doi-Edwards). TSS MAOS signatures reveal much more than just the perturbation parameter A in the shear damping function small-strain expansion, $h(_γ) = 1 + \text{A}_γ$$^2 + \mathcal{O}(_γ$$^4)$. Specifically, the distribution of terminal relaxation times is significantly more apparent in the TSS MAOS functions than their LVE counterparts. We theoretically show that this occurs because TSS MAOS material functions are sensitive to higher-order moments of the relaxation spectrum, which leads to the definition of MAOS liquids. We also show the first examples of MAOS signatures that differ from the liquid-like terminal MAOS behavior predicted by the fourth-order fluid expansion. This occurs when higher moments of the relaxation spectrum are not finite. The famous corotational Maxwell model is a subset of our results here, for which A = -1/6, and any LVE relaxation spectrum could be used.

36 MATERIALS SCIENCE↗

The effects of surface bond relaxation on electronic structure of Sb{sub 2}Te{sub 3} nano-films by first-principles calculation

The effects of vertical compressive stress on Sb{sub 2}Te{sub 3} nano-films have been investigated by the first principles calculation, including stability, electronic structure, crystal structure, and bond order. It is found that the band gap of nano-film is sensitive to the stress in Sb{sub 2}Te{sub 3} nano-film and the critical thickness increases under compressive stress. The band gap and band order of Sb{sub 2}Te{sub 3} film has been affected collectively by the surface and internal crystal structures, the contraction ratio between surface bond length of nano-film and the corresponding bond length of bulk decides the band order of Sb{sub 2}Te{sub 3} film.

36 MATERIALS SCIENCE↗

Reduced variable technique for predicting grain behavior

The use of reduced variables to account for the time-temperature dependence of the relaxation modulus is a standard and universally adopted technique in the stress analysis of solid propellant grains. Recent work has suggested that the reduced variable technique can also be used to account for the dependence of the relaxation modulus on the crosslink density of an elastomer system. By combining variables, it is now possible to determine the relaxation modulus as a function of both mechanical and chemical parameters over a long period of time. The problems involved, the pitfalls to be avoided, and suggested techniques to be used in acquiring data are discussed.

Lewis, G. W.↗

Elliptic Relaxation of a Tensor Representation of the Pressure-Strain and Dissipation Rate

A formulation to include the effects of wall-proximity in a second moment closure model is presented that utilizes a tensor representation for the redistribution term in the Reynolds stress equations. The wall-proximity effects are modeled through an elliptic relaxation process of the tensor expansion coefficients that properly accounts for both correlation length and time scales as the wall is approached. DNS data and Reynolds stress solutions using a full differential approach at channel Reynolds number of 590 are compared to the new model.

Carlson, John R.↗

Assessment and prediction of drying shrinkage cracking in bonded mortar overlays

Restrained drying shrinkage cracking was investigated on composite beams consisting of substrate concrete and bonded mortar overlays, and compared to the performance of the same mortars when subjected to the ring test. Stress development and cracking in the composite specimens were analytically modeled and predicted based on the measurement of relevant time-dependent material properties such as drying shrinkage, elastic modulus, tensile relaxation and tensile strength. Overlay cracking in the composite beams could be very well predicted with the analytical model. The ring test provided a useful qualitative comparison of the cracking performance of the mortars. The duration of curing was found to only have a minor influence on crack development. This was ascribed to the fact that prolonged curing has a beneficial effect on tensile strength at the onset of stress development, but is in the same time not beneficial to the values of tensile relaxation and elastic modulus. -- Highlights: •Parameter study on material characteristics influencing overlay cracking. •Analytical model gives good quantitative indication of overlay cracking. •Ring test presents good qualitative indication of overlay cracking. •Curing duration has little effect on overlay cracking.

36 MATERIALS SCIENCE↗

Buckling-induced interaction between circular inclusions in an infinite thin plate

Design of slender artificial materials and morphogenesis of thin biological tissues typically involve stimulation of isolated regions (inclusions) in the growing body. These inclusions apply internal stresses on their surrounding areas that are ultimately relaxed by out-of-plane deformation (buckling). Here, we utilize the Föppl-von Kármán model to analyze the interaction between two circular inclusions in an infinite plate that their centers are separated a distance of 2ℓ. In particular, we investigate a region in phase space where buckling occurs at a narrow transition layer of length ℓ D around the radius of the inclusion, $R (ℓ_D \ll R)$. We show that the latter length scale defines two regions within the system, the close separation region, $ℓ – R \sim ℓ_D$, where the transition layers of the two inclusions approximately coalesce, and the far separation region, $ℓ – R \gg ℓ_D$. While the interaction energy decays exponentially in the latter region, $E_{\text{int}} ∝ e^{– (ℓ – R)/ℓ_D}$, it presents nonmonotonic behavior in the former region. While this exponential decay is predicted by our analytical analysis and agrees with the numerical observations, the close separation region is treated only numerically. In particular, we utilize the numerical investigation to explore two different scenarios within the final configuration: The first where the two inclusions buckle in the same direction (up-up solution) and the second where the two inclusions buckle in opposite directions (up-down solution). We show that the up-down solution is always energetically favorable over the up-up solution. In addition, we point to a curious symmetry breaking within the up-down scenario; we show that this solution becomes asymmetric in the close separation region.

42 ENGINEERING↗

Plasticity-induced anisotropy in amorphous solids: The Bauschinger effect

Amorphous solids that underwent a strain in one direction such that they responded in a plastic manner 'remember' that direction also when relaxed back to a state with zero mean stress. We address the question 'what is the order parameter that is responsible for this memory?' and is therefore the reason for the different subsequent responses of the material to strains in different directions. We identify such an order parameter which is readily measurable, we discuss its trajectory along the stress-strain curve, and propose that it and its probability distribution function must form a necessary component of a theory of elastoplasticity.

36 MATERIALS SCIENCE↗

Verification of experimental dynamic strength methods with atomistic ramp-release simulations

Material strength and moduli can be determined from dynamic high-pressure ramp-release experiments using an indirect method of Lagrangian wave profile analysis of surface velocities. This method, termed self-consistent Lagrangian analysis (SCLA), has been difficult to calibrate and corroborate with other experimental methods. Using nonequilibrium molecular dynamics, we validate the SCLA technique by demonstrating that it accurately predicts the same bulk modulus, shear modulus, and strength as those calculated from the full stress tensor data, especially where strain rate induced relaxation effects and wave attenuation are small. We show here that introducing a hold in the loading profile at peak pressure gives improved accuracy in the shear moduli and relaxation-adjusted strength by reducing the effect of wave attenuation. When rate-dependent effects coupled with wave attenuation are large, we find that Lagrangian analysis overpredicts the maximum unload wavespeed, leading to increased error in the measured dynamic shear modulus. Furthermore, these simulations provide insight into the definition of dynamic strength, as well as a plausible explanation for experimental disagreement in reported dynamic strength values.

36 MATERIALS SCIENCE↗

Hard-switching reliability studies of 1200 V vertical GaN PiN diodes

Here, we report on reliability testing of vertical GaN (v-GaN) devices under continuous switching conditions of 500, 750, and 1000 V. Using a modified double-pulse test circuit, we evaluate 1200 V-rated v-GaN PiN diodes fabricated by Avogy. Forward current–voltage characteristics do not change over the stress period. Under the reverse bias, the devices exhibit an initial rise in leakage current, followed by a slower rate of increase with further stress. The leakage recovers after a day's relaxation which suggests that trapping of carriers in deep states is responsible. Overall, we found the devices to be robust over the range of conditions tested.

36 MATERIALS SCIENCE↗

Navier-Stokes computations for aerodynamic configurations at high angles of attack

Navier-Stokes computations at high angles of attack over aerodynamic configurations are presented using an implicit finite-volume algorithm. The spatial differencing is upwind-biased for the convective and pressure terms and central for the shear stress and heat transfer terms. The equations are relaxed to steady state with a spatially factored implicit algorithm. In order to treat general geometries, a multiblock patched-grid framework is implemented. Applications and detailed comparisons with experimental data are made for two simple but representative geometric shapes: (1) a highly swept delta wing and (2) a prolate spheroid of 6:1 length-to-diameter. Recent extensions of the algorithm to compute the flow over an F-18 forebody-strake configuration are shown, including comparisons with wind tunnel and flight test results. Comparisons across the range of Reynolds number for all cases indicate that either low Reynolds number or high Reynolds number flows are simulated well, but that flows at intermediate Reynolds number cannot be simulated accurately without a detailed knowledge of the transitional zone between laminar and turbulent flow.

Thomas, J. L.↗

Using ABAQUS Scripting Interface for Materials Evaluation and Life Prediction

An ABAQUS script has been written to aid in the evaluation of the mechanical behavior of viscoplastic materials. The purposes of the script are to: handle complex load histories; control load/displacement with alternate stopping criteria; predict failure and life; and verify constitutive models. Material models from the ABAQUS library may be used or the UMAT routine may specify mechanical behavior. User subroutines implemented include: UMAT for the constitutive model; UEXTERNALDB for file manipulation; DISP for boundary conditions; and URDFIL for results processing. Examples presented include load, strain and displacement control tests on a single element model. The tests are creep with a life limiting strain criterion, strain control with a stress limiting cycle and a complex interrupted cyclic relaxation test. The techniques implemented in this paper enable complex load conditions to be solved efficiently with ABAQUS.

Powers, Lynn M.↗

Experimental Characterization of the Dimensional Stability of Deployable Composite Booms During Stowage

Thin-ply carbon fiber reinforced polymer materials offer the opportunity to create long thin-shell booms with high strength to weight ratios. These booms can be rolled up and stowed in small volumes to be later deployed. These features make them ideal for use in gossamer solar sails as well as other deployable space structures. It has been observed that stowing the booms in rolled-up configurations can cause time-dependent deformations. A comprehensive understanding of the detrimental effects of stowing the coiled booms is necessary to implement these structures in spaceflight missions. During stowage inside the spacecraft, the boom is subjected to a constant deformation/strain that causes it to relax over time, measurable by a decrease in stress. Using large deformation bending tests, the complete fold-stow-unfold-recover cycle of thin-laminate candidates for the rollable booms is characterized. Further bending and stowage testing is done at the boom level. The results from this test campaign will be used to evaluate the dimensional stability of deployable booms made from thin-ply composites that exhibit visco-elasto-plastic behavior and calibrate and validate numerical finite element models that include visco-elasto-plastic material models.

Experimental Characterization↗

Postseismic viscoelastic surface deformation and stress. Part 1: Theoretical considerations, displacement and strain calculations

A model of viscoelastic deformations associated with earthquakes is presented. A strike-slip fault is represented by a rectangular dislocation in a viscoelastic layer (lithosphere) lying over a viscoelastic half-space (asthenosphere). Deformations occur on three time scales. The initial response is governed by the instantaneous elastic properties of the earth. A slower response is associated with viscoelastic relaxation of the lithosphere and a yet slower response is due to viscoelastic relaxation of the asthenosphere. The major conceptual contribution is the inclusion of lithospheric viscoelastic properties into a dislocation model of earthquake related deformations and stresses. Numerical calculations using typical fault parameters reveal that the postseismic displacements and strains are small compared to the coseismic ones near the fault, but become significant further away. Moreover, the directional sense of the deformations attributable to the elastic response, the lithospheric viscoelastic softening, and the asthenospheric viscoelastic flow may differ and depend on location and model details. The results and theoretical arguments suggest that the stress changes accompanying lithospheric relaxation may also be in a different sense than and be larger than the strain changes.

Cohen, S. C.↗

Ancient dorsa-related stresses of the Tharsis region on Mars

The early structural history of the Martian Tharsis bulge was studied in terms of a compensation model proposed by Froidevaux and Isacks (1984) proposed for terrestrial plateau uplift. The analysis was based on the regional topographic data on the bulge and the distribution of compressional tectonic features and major volcanoes. The results indicate that the initial phases of the Tharsis formation were dominated by the mantle plume doming, followed by extrusional dome raising; the volcanism became the most important bulge building factor only after thickening of the crust. The formation of the Tharsis bulge and the partial relaxation of this bulge have led to significant horizontal stresses and compression within the peripheral areas. The compressional peripheral zone around the bulge gave rise to dorsa formation while the high bulge crests have been in tensional state.

Raitala, Jouko↗

Evolution of assumed stress hybrid finite element

Early versions of the assumed stress hybrid finite elements were based on the a priori satisifaction of stress equilibrium conditions. In the new version such conditions are relaxed but are introduced through additional internal displacement functions as Lagrange multipliers. A rational procedure is to choose the displacement terms such that the resulting strains are now of complete polynomials up to the same degree as that of the assumed stresses. Several example problems indicate that optimal element properties are resulted by this method.

Pian, T. H. H.↗

In-situ stress analysis with X-Ray diffraction for yield locus characterization of sheet metals

A main problem in the field of sheet metal characterization is the inhomogeneous plastic deformation in the gauge regions of specimens which causes the analytically calculated stresses to differ from the sought state of stress acting in the middle of the gauge region. To overcome this problem, application of X-Ray diffraction is analyzed. For that purpose a mobile X-ray diffractometer and an optical strain measurement system are mounted on a universal tensile testing machine. This enables the recording of the whole strain and stress history of a material point. The method is applied to uniaxial tension tests, plane strain tension tests and shear tests to characterize the interstitial free steel alloy DC06. The applicability of the concepts of stress factors is verified by uniaxial tension tests. The experimentally obtained values are compared with the theoretical values calculated with crystal elasticity models utilizing the orientation distribution functions (ODF). The relaxation problem is addressed which shows itself as drops in the stress values with the strain kept at a constant level. This drop is analyzed with elasto-viscoplastic material models to correct the measured stresses. Results show that the XRD is applicable to measure the stresses in sheet metals with preferred orientation. The obtained yield locus is expressed with the Yld2000–2D material model and an industry oriented workpiece is analyzed numerically. The comparison of the strain distribution on the workpiece verifies the identified material parameters.

36 MATERIALS SCIENCE↗