Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scattering problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Sources of Terrestrial Volatiles

Atmospheres are found enveloping those planets and satellites best able to hold them. The obvious conclusion is that volatile escape must have played nearly as great a role as volatile supply. A consequence of this view is that volatile supplies were probably much greater than the atmospheres that remain. The likeliest candidates are sources associated with the main events of planetary accretion itself such as volatile-rich planetesimals, or direct gravitational capture of nebular gases. Late asteroidal or cometary volatile-rich veneers are attractive, but they present quantitative difficulties. Comets in particular are inadequate, because the associated mass of stray comets that would have been scattered to the Oort Cloud or beyond is excessive. This difficulty applies to Uranus-Neptune planetesimals as well as to a putative massive early Kuiper Belt. Another potential problem with comets is that the D/H ratio in the three comets for which this has been measured is about twice that of Earth's oceans. Objects falling from a much augmented ancient asteroid belt remain a viable option, but timing is an issue: Can the depopulation of the asteroid belt be delayed long enough that it makes sense to talk of asteroids as a late veneer? Early accretion of asteroids as objects scattered into the maw of infant Earth makes more sense. Another appealing candidate population of volatile-rich objects for the inner solar system would be scattered planetesimals associated with the accretion of Jupiter, for two reasons: (1) Before there was Jupiter, there was no object in the solar system capable of expelling comets efficiently, and (2) the cross section of the inner solar system to stray objects was Greater when there were m many planetesimals.

Zahnle, K. J.↗

Moment-preserving Monte-Carlo Coulomb collision method for particle codes

Binary-pairing Monte-Carlo methods are widely used in particle-in-cell codes to capture effects of small angle Coulomb collisions. These methods preserve momentum and energy exactly when the simulation particles have equal weights. However, when the interacting particles are of varying weight, these physical conservation laws are only preserved on average. Here, we 1) extend these methods to weighted particles such that the scattering physics is correct on average, and 2) describe a new method for adjusting the particle velocities post scatter to restore exact conservation of momentum and energy. In conclusion, the efficacy of the model is illustrated with various test problems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Attractive Effect of a Strong Electronic Repulsion: The Physics of Vertex Divergences

While the breakdown of the perturbation expansion for the many-electron problem has several formal consequences, here we unveil its physical effect: flipping the sign of the effective electronic interaction in specific scattering channels. By decomposing local and uniform susceptibilities of the Hubbard model via their spectral representations, we prove how entering the nonperturbative regime causes an enhancement of the charge response, ultimately responsible for the phase-separation instabilities close to the Mott metal-insulator transition. Furthermore, our analysis opens a new route for understanding phase transitions in the nonperturbative regime and clarifies why attractive effects emerging from a strong repulsion can induce phase separations but not s-wave pairing or charge-density wave instabilities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coarse Mesh Finite Difference Acceleration for Pebble Tracking Transport in Griffin

We implemented a coarse mesh finite difference (CMFD) for accelerating transport calculations with PTT (pebble tracking transport) in the Griffin code. More specifically, extensions for transport update with the consideration of scattering operator and CMFD projection were implemented for PTT. The implementation was verified with a simplified PBR (pebble bed reactor) benchmark problem and significant performance improvements in CPU time was observed.

97 MATHEMATICS AND COMPUTING↗

X-ray and VLBI radio observations of the quasars NRAO 140 and NRAO 530

The Einstein X-ray Observatory has confirmed the HEAO 1 detection of the NRAO 140 and NRAO 530 quasars, and found that the low-energy X-ray flux of NRAO 140 is consistent with the high-energy results from the earlier satellite. It is also determined that the X-ray emission from NRAO 530 has either decreased by an order of magnitude, from 1978.0 to 1979.7, or the HEAO 1 field contained a second bright source. The two sources have been observed at 2.8 cm, using a four-station intercontinental VLB array, to find whether the X-ray emission is caused by Compton scattering within the radio components. Dissection of the NRAO 140 into its separate components shows radio parameters that imply a 'Compton problem', in that X-ray emission three orders of magnitude greater than that observed is predicted in one of the components if the source is static. Because the effect is independent of distance, relativistic motion with a Lorentz factor greater than about 40 is required to bring the predicted X-ray flux down to the observed value.

Marscher, A. P.↗

Usefulness of multifrequency MST radar measurements, part 2.6B

Scattering of radio waves from atmospheric refractive-index irregularities induced by turbulence was invoked almost four decades ago to explain the characteristics of signals received on VHF/UHF ionospheric and tropospheric forward-scatter links. Due to the bistatic geometry of these links a slender, horizontally extended, common volume or cell is formed in space. The principal contribution to scattering arises from refractive-index fluctuations in this volume at the Bragg wave number K approx. sub B = K approx. sub i -k approx. sub s vectors. It has been surmised that the use of more than one frequency in probing the middle-atmosphere regions should help resolve several issues pertaining to the scattering mechanism. These issues are briefly re-examined in this note. The implications of the radar equation are discussed. The problems arising due to layered structure of turbulence and the choice of frequencies most suitable for multifrequency measurements are considered.

Rastogi, P. K.↗

Cosmic ray modulation in a random anisotropic magnetic field

Inhomogeneities of the interplanetary magnetic field can be divided into small scale and large scale ones as may be required by the character of the problem of cosmic ray (CR) propagation. CR propagation in stochastic magnetic fields is of diffusion character. The main contribution into the scattering of CR particles is made by their interaction with inhomogeneities of the magnetic field H which have characteristic dimensions 1 of the order of Larmor radius R=cp/eH of particle (p is the absolute value of particle momentum, e is particle charge, c is velocity of light). Scattering of particles on such inhomogeneities leads to their diffusion mostly along a magnetic field with characteristic dimensions of variation in space exceeding the mean free path.

Dorman, L. I.↗

Ultrasonic characterization of microstructure in powder metal alloy

The ultrasonic wave propagation characteristics were measured for IN-100, a powder metallurgy alloy used for aircraft engine components. This material was as a model system for testing the feasibility of characterizing the microstructure of a variety of inhomogeneous media including powder metals, ceramics, castings and components. The data were obtained for a frequency range from about 2 to 20 MHz and were statistically averaged over numerous volume elements of the samples. Micrographical examination provided size and number distributions for grain and pore structure. The results showed that the predominant source for the ultrasonic attenuation and backscatter was a dense (approx. 100/cubic mm) distribution of small micropores (approx. 10 micron radius). Two samples with different micropore densities were studied in detail to test the feasibility of calculating from observed microstructural parameters the frequency dependence of the microstructural backscatter in the regime for which the wavelength is much larger than the size of the individual scattering centers. Excellent agreement was found between predicted and observed values so as to demonstrate the feasibility of solving the forward problem. The results suggest a way towards the nondestructive detection and characterization of anomalous distributions of micropores when conventional ultrasonic imaging is difficult. The findings are potentially significant toward the application of the early detection of porosity during the materials fabrication process and after manufacturing of potential sites for stress induced void coalescence leading to crack initiation and subsequent failure.

Tittmann, B. R.↗

A new technique for simulating composite material. Task 2: Analytical solutions with Generalized Impedance Boundary Conditions (GIBCs)

The diffraction problem associated with a multilayer material slab recessed in a perfectly conducting ground plane is formulated and solved via the Generalized Scattering Matrix Formulation (GSMF) in conjunction with the dual integral equation approach. The multilayer slab is replaced by a surface obeying a generalized impedance boundary condition (GIBC) to facilitate the computation of the pertinent Wiener Hopf split functions and their zeros. Both E(sub z) and H(sub z) polarizations are considered and a number of scattering patterns are presented, some of which are compared to exact results available for a homogeneous recessed slab.

Ricoy, M. A.↗

Diffraction by a multilayer slab recessed in a ground plane via generalized impedance boundary conditions

The diffraction problem associated with a multilayer material slab recessed in a perfectly conducting ground plane is formulated and solved via the generalized scattering matrix formulation in conjunction with the dual integral equation approach. The multilayer slab is replaced by a surface obeying a generalized impedance boundary condition to facilitate the computation of the pertinent Wiener Hopf split functions and their zeros. Both Ez and Hz polarizations are considered, and a number of scattering patterns are presented, some of which are compared to exact results available for a homogeneous recessed slab.

Ricoy, M. A.↗

Transport theory for a leaf canopy of finite-dimensional scattering centers

A formalism for photon transport in leaf canopies with finite-dimensional scattering centers that cross shade mutually is developed. Starting from first principles, expressions for the interaction cross sections are derived. The problem of illumination by a monodirectional source is studied in detail using a successive collisions approach. A balance equation is formulated in R3 and the interaction between a leaf canopy and the adjacent atmosphere is discussed. Although the details are those relating to a leaf canopy, the formalism is equally applicable to other media where the constituents cross shade mutually such as planetary surfaces, rings and ridged-ice in polar regions, i.e., media that exhibit opposition brightening.

Myneni, Ranga B.↗

A comparison of lidar inversion methods for cirrus applications

Several methods for inverting the lidar equation are suggested as means to derive the cirrus optical properties (beta backscatter, alpha extinction coefficients, and delta optical depth) at one wavelength. The lidar equation can be inverted in a linear or logarithmic form; either solution assumes a linear relationship: beta = kappa(alpha), where kappa is the lidar ratio. A number of problems prevent us from calculating alpha (or beta) with a good accuracy. Some of these are as follows: (1) the multiple scattering effect (most authors neglect it); (2) an absolute calibration of the lidar system (difficult and sometimes not possible); (3) lack of accuracy on the lidar ratio k (taken as constant, but in fact it varies with range and cloud species); and (4) the determination of boundary condition for logarithmic solution which depends on signal to noise ration (SNR) at cloud top. An inversion in a linear form needs an absolute calibration of the system. In practice one uses molecular backscattering below the cloud to calibrate the system. This method is not permanent because the lower atmosphere turbidity is variable. For a logarithmic solution, a reference extinction coefficient (alpha(sub f)) at cloud top is required. Several methods to determine alpha(sub f) were suggested. We tested these methods at low SNR. This led us to propose two new methods referenced as S1 and S2.

Elouragini, Salem↗

Correction of WindScat Scatterometric Measurements by Combining with AMSR Radiometric Data

The Seawinds scatterometer on the advanced Earth observing satellite-2 (ADEOS-2) will determine surface wind vectors by measuring the radar cross section. Multiple measurements will be made at different points in a wind-vector cell. When dense clouds and rain are present, the signal will be attenuated, thereby giving erroneous results for the wind. This report describes algorithms to use with the advanced mechanically scanned radiometer (AMSR) scanning radiometer on ADEOS-2 to correct for the attenuation. One can determine attenuation from a radiometer measurement based on the excess brightness temperature measured. This is the difference between the total measured brightness temperature and the contribution from surface emission. A major problem that the algorithm must address is determining the surface contribution. Two basic approaches were developed for this, one using the scattering coefficient measured along with the brightness temperature, and the other using the brightness temperature alone. For both methods, best results will occur if the wind from the preceding wind-vector cell can be used as an input to the algorithm. In the method based on the scattering coefficient, we need the wind direction from the preceding cell. In the method using brightness temperature alone, we need the wind speed from the preceding cell. If neither is available, the algorithm can work, but the corrections will be less accurate. Both correction methods require iterative solutions. Simulations show that the algorithms make significant improvements in the measured scattering coefficient and thus is the retrieved wind vector. For stratiform rains, the errors without correction can be quite large, so the correction makes a major improvement. For systems of separated convective cells, the initial error is smaller and the correction, although about the same percentage, has a smaller effect.

Song, S.↗

Algorithmic Extensions of Low-Dispersion Scheme and Modeling Effects for Acoustic Wave Simulation

Accurate computation of acoustic wave propagation may be more efficiently performed when their dispersion relations are considered. Consequently, computational algorithms which attempt to preserve these relations have been gaining popularity in recent years. In the present paper, the extensions to one such scheme are discussed. By solving the linearized, 2-D Euler and Navier-Stokes equations with such a method for the acoustic wave propagation, several issues were investigated. Among them were higher-order accuracy, choice of boundary conditions and differencing stencils, effects of viscosity, low-storage time integration, generalized curvilinear coordinates, periodic series, their reflections and interference patterns from a flat wall and scattering from a circular cylinder. The results were found to be promising en route to the aeroacoustic simulations of realistic engineering problems.

Kaushik, Dinesh K.↗

Interoperability of Heliophysics Virtual Observatories

If you'd like to find interrelated heliophysics (also known as space and solar physics) data for a research project that spans, for example, magnetic field data and charged particle data from multiple satellites located near a given place and at approximately the same time, how easy is this to do? There are probably hundreds of data sets scattered in archives around the world that might be relevant. Is there an optimal way to search these archives and find what you want? There are a number of virtual observatories (VOs) now in existence that maintain knowledge of the data available in subdisciplines of heliophysics. The data may be widely scattered among various data centers, but the VOs have knowledge of what is available and how to get to it. The problem is that research projects might require data from a number of subdisciplines. Is there a way to search multiple VOs at once and obtain what is needed quickly? To do this requires a common way of describing the data such that a search using a common term will find all data that relate to the common term. This common language is contained within a data model developed for all of heliophysics and known as the SPASE (Space Physics Archive Search and Extract) Data Model. NASA has funded the main part of the development of SPASE but other groups have put resources into it as well. How well is this working? We will review the use of SPASE and how well the goal of locating and retrieving data within the heliophysics community is being achieved. Can the VOs truly be made interoperable despite being developed by so many diverse groups?

Thieman, J.↗

A Deep Learning Approach to Fast Radiative Transfer

Due to the sheer volume of data, leveraging satellite instrument observations effectively in a data assimilation context for numerical weather prediction or for remote sensing requires a radiative transfer model as an observation operator that is both fast and accurate at the same time. Physics-based line-by-line radiative transfer (RT) models fulfil the requirement for accuracy, but are too slow and too costly in computational terms for operational applications. Therefore, fast methods were developed to be able to perform fast RT calculations using techniques such as spectral sampling or pre-computed look-up tables. The operational fast models currently calculate the absorption and scattering coefficients from the pre-computed regression coefficients and atmospheric state and cloud profiles. As a novel solution to this problem, this work investigates a deep learning approach to replace the regression coefficients in the fast RT models. A selection of hidden-layer neural network configurations is trained against atmospheric transmittance profile data computed by an accurate line-by-line model and their performance is evaluated and their advantages and disadvantages are discussed.

Machine learning↗

A Fiber Optic Probe for Monitoring Protein Aggregation, Nucleation, and Crystallization

Protein crystals are experimentally grown in hanging drops in microgravity experiments on-board the Space Shuttle orbiter. The technique of dynamic light scattering (DLS) can be used to monitor crystal growth process in hanging droplets (approx. 30 (L)) in microgravity experiments, but elaborate instrumentation and optical alignment problems have made in-situ applications difficult. In this paper we demonstrate that such experiments are now feasible. We apply a newly developed fiber optic probe to various earth and space (micro- gravity) bound protein crystallization system configurations to test its capability. These include conventional batch (cuvette or capillary) systems, hanging drop method in a six-pack hanging drop vapor diffusion apparatus (HDVDA), a modified HDVDA for temperature- induced nucleation and aggregation studies, and a newly envisioned dynamically controlled vapor diffusion system (DCVDS) configuration. Our compact system exploits the principles of DLS and offers a fast (within a few seconds) means of quantitatively and non-invasively monitoring the various growth stages of protein crystallization. In addition to DLS capability, the probe can also be used for performing single-angle static light scattering measurements. It utilizes extremely low levels of laser power (approx. few (W)) without a need of having any optical alignment and vibration isolation. The compact probe is also equipped with a miniaturized microscope for visualization of macroscopic protein crystals. This new optical diagnostic system opens up enormous opportunity for exploring new ways to grow good quality crystals suitable for x-ray crystallographic analysis and may help develop a concrete scientific basis for understanding the process of crystallization.

Ansari, Rafat R.↗

Plasma drag on a dust grain due to Coulomb collisions

Expressions are given for the drag due to Coulomb collisions on a charged dust grain moving through a plasma. The commonly used Chandrasekhar (1943) result does not include large scattering angles or plasma collective effects. An equation given by Morfill et al. (1980) which does include large scattering angles, is limited to one-dimensional plasma particle motion and can give at least an order of magnitude too much drag. This paper also makes use of an analogy between the drag problem and problems in electrostatics. This analogy permits generalization to any isotropic plasma of an observation made by Chandrasekhar for a Maxwellian, namely, that the drag is independent of the presence or absence of plasma particles moving faster than the grain. Finally, the contribution of plasma collective effects to the drag is studied with the inclusion of large scattering angles.

Northrop, T. G.↗