Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar Modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

The solar and dynamically induced oscillations in the stratosphere

The temporal and spatial features of stratospheric fluctuations are analyzed using 2.5 years of ozone and temperature data from the Nimbus 7 solar backscattered ultraviolet and the SAMS experiments. It is observed that the oscillations are dynamically induced perturbations in the winter hemisphere and the 27-day modulation of the solar UV radiation. The fluctuations in the ozone and temperature are compared with solar activity. The effects of solar and temperature perturbations on stratospheric ozone are examined; it is shown that the dynamically induced oscillations are global and independent of solar activity. The seasonal, latitudinal, and altitudinal variations of the regression factors and their influence on the ozone are studied. Multiple regression and cross-spectral analyses of ozone, temperature, and solar flux data reveal that the ozone mixing ratio is more sensitive to changes in temperature than changes in solar activity.

Chandra, S.↗
NASA NTRS2019

Forecasting the Ambient Solar Wind with Numerical Models. I. On the Implementation of an Operational Framework

The ambient solar wind conditions in interplanetary space and in the near-Earth environment are determined by activity on the Sun. Steady solar wind streams modulate the propagation behavior of interplanetary coronal mass ejections and are themselves an important driver of recurrent geomagnetic storm activity. The knowledge of the ambient solar wind flows and fields is thus an essential component of successful space weather forecasting. Here, we present an implementation of an operational framework for operating, validating, and optimizing models of the ambient solar wind flow on the example of Carrington Rotation 2077. We reconstruct the global topology of the coronal magnetic field using the potential field source surface model (PFSS) and the Schatten current sheet model (SCS) and discuss three empirical relationships for specifying the solar wind conditions near the Sun, namely the Wang–Sheeley (WS) model, the distance from the coronal hole boundary model (DCHB), and the Wang-Sheeley–Arge (WSA) model. By adding uncertainty in the latitude about the sub-Earth point, we select an ensemble of initial conditions and map the solutions to Earth by the Heliospheric Upwind eXtrapolation (HUX) model. We assess the forecasting performance from a continuous variable validation and find that the WSA model most accurately predicts the solar wind speed time series (RMSE≈83 km/s). We note that the process of ensemble forecasting slightly improves the forecasting performance of all solar wind models investigated. We conclude that the implemented framework is well suited for studying the relationship between coronal magnetic fields and the properties of the ambient solar wind flow in the near-Earth environment.

Reiss, Martin A.↗
NASA NTRS1981

Evaluation and verification of epitaxial process sequence for silicon solar cell production

The applicability of solar cell and module processing sequences, to be used on lower cost epitaxial silicon wafers was evaluated. The extent to which the process sequences perform effectively when applied to film solar cells formed by epitaxial deposition of Si on potentially inexpensive substrates of upgraded metallurgical grade Si is examined. It is concluded that these substrates are satisfactory in their cell performance.

Redfield, D.↗
NASA NTRS1981

Dispersed solar thermal generation employing parabolic dish-electric transport with field modulated generator systems

This paper discusses the application of field modulated generator systems (FMGS) to dispersed solar-thermal-electric generation from a parabolic dish field with electric transport. Each solar generation unit is rated at 15 kWe and the power generated by an array of such units is electrically collected for insertion into an existing utility grid. Such an approach appears to be most suitable when the heat engine rotational speeds are high (greater than 6000 r/min) and, in particular, if they are operated in the variable speed mode and if utility-grade a.c. is required for direct insertion into the grid without an intermediate electric energy storage and reconversion system. Predictions of overall efficiencies based on conservative efficiency figures for the FMGS are in the range of 25 per cent and should be encouraging to those involved in the development of cost-effective dispersed solar thermal power systems.

Ramakumar, R.↗
NASA NTRS1984

Observations of the dynamics of the cosmic ray modulation

New measurements of the outward propagation of the cosmic ray modulation and large transient decreases at a radial distance of 10-30 AU from the earth are reported. Also, new observations of the hysteresis effect in the 11-year modulation are presented for two solar cycles, and an attempt is made to reproduce the long-term modulation at earth from the observed transient or Forbush decreases. The results indicate that steady-state, spherically symmetric models of the heliosphere are not capable of explaining the 11-year variation. A time-dependent solution to the cosmic ray transport equation is required to describe the solar cosmic ray modulation.

Webber, W. R.↗
NASA NTRS1985

Longitudinal dependence of the interplanetary perturbation produced by energetic type 4 solar flares and of the associated cosmic ray modulation

One of the most significant features of the flare-associated Forbush decreases (Fds) in the galatctic cosmic ray (c.r.) is the so-called East-West asymmetry: the solar flares (Sfs) observed in the Eastern or central region of the solar disk exhibit a higher probability to cause large Fds than the Sfs occurring in the Western portion of the disk. In particular the interplanetary perturbations generated by Type IV Sfs depress the c.r. intensity in a vast spiral cone-like region (modulated region) which extends along the interplanetary magnetic field from the neighborhood of the active region to the advancing perturbation, and that, immediately after the flare-generated perturbation, the maximum c.r. modulation is observed between 0 and 40 deg. W of the meridian plane crossings the flare site at time of flare (flare's meridian plane).

Iucci, N.↗
NASA NTRS1989

Soliton and strong Langmuir turbulence in solar flare processes

The occurrence of modulational instability in the current sheet of a solar flare is investigated. Special attention is given to the plasma microinstability in this sheet and its relation to the flare process. It is found that solitons or strong Langmuir turbulence are likely to occur in the diffusion region under solar flare conditions in which the electric resistivity could be enhanced by several orders of magnitude in the region, resulting in significant heating and stochastic acceleration of particles. A numerical example is used to demonstrate the transition of the magnetic field velocity and plasma density from the outer MHD region into the diffusive region and then back out again with the completion of the energy conversion process. This is all made possible by an increase in resistivity of four to five orders of magnitude over the classical value.

Song, M. T.↗
NASA NTRS1980

Solar cell system having alternating current output

A monolithic multijunction solar cell was modified by fabricating an integrated circuit inverter on the back of the cell to produce a device capable of generating an alternating current output. In another embodiment, integrated curcuit power conditioning electronics was incorporated in a module containing a solar cell power supply.

Evans, J. C., Jr.↗
NASA NTRS2008

Intelligent Memory Module Overcomes Harsh Environments

Solar cells, integrated circuits, and sensors are essential to manned and unmanned space flight and exploration, but such systems are highly susceptible to damage from radiation. Especially problematic, the Van Allen radiation belts encircle Earth in concentric radioactive tori at distances from about 6,300 to 38,000 km, though the inner radiation belt can dip as low as 700 km, posing a severe hazard to craft and humans leaving Earth s atmosphere. To avoid this radiation, the International Space Station and space shuttles orbit at altitudes between 275 and 460 km, below the belts range, and Apollo astronauts skirted the edge of the belts to minimize exposure, passing swiftly through thinner sections of the belts and thereby avoiding significant side effects. This radiation can, however, prove detrimental to improperly protected electronics on satellites that spend the majority of their service life in the harsh environment of the belts. Compact, high-performance electronics that can withstand extreme environmental and radiation stress are thus critical to future space missions. Increasing miniaturization of electronics addresses the need for lighter weight in launch payloads, as launch costs put weight at a premium. Likewise, improved memory technologies have reduced size, cost, mass, power demand, and system complexity, and improved high-bandwidth communication to meet the data volume needs of the next-generation high-resolution sensors. This very miniaturization, however, has exacerbated system susceptibility to radiation, as the charge of ions may meet or exceed that of circuitry, overwhelming the circuit and disrupting operation of a satellite. The Hubble Space Telescope, for example, must turn off its sensors when passing through intense radiation to maintain reliable operation. To address the need for improved data quality, additional capacity for raw and processed data, ever-increasing resolution, and radiation tolerance, NASA spurred the development of the Radiation Tolerant Intelligent Memory Stack (RTIMS).

Source record↗
NASA NTRS1991

Evaluation of thermal control coatings for use on solar dynamic radiators in low Earth orbit

Thermal control coatings with high thermal emittance and low solar absorptance are needed for Space Station Freedom (SSF) solar dynamic power module radiator (SDR) surfaces for efficient heat rejection. Additionally, these coatings must be durable to low earth orbital (LEO) environmental effects of atomic oxygen, ultraviolet radiation and deep thermal cycles which occur as a result of start-up and shut-down of the solar dynamic power system. Eleven candidate coatings were characterized for their solar absorptance and emittance before and after exposure to ultraviolet (UV) radiation (200 to 400 nm), vacuum UV (VUV) radiation (100 to 200 nm) and atomic oxygen. Results indicated that the most durable and best performing coatings were white paint thermal control coatings Z-93, zinc oxide pigment in potassium silicate binder, and YB-71, zinc orthotitanate pigment in potassium silicate binder. Optical micrographs of these materials exposed to the individual environmental effects of atomic oxygen and vacuum thermal cycling showed that no surface cracking occurred.

Dever, Joyce A.↗
NASA NTRS1991

Evaluation of thermal control coatings for use on solar dynamic radiators in low earth orbit

Thermal control coatings with high thermal emittance and low solar absorptance are needed for Space Station Freedom (SSF) solar dynamic power module radiator (SDR) surfaces for efficient heat rejection. Additionally, these coatings must be durable to low earth orbital (LEO) environmental effects of atomic oxygen, ultraviolet radiation and deep thermal cycles which occur as a result of start-up and shut-down of the solar dynamic power system. Eleven candidate coatings were characterized for their solar absorptance and emittance before and after exposure to ultraviolet (UV) radiation (200 to 400 nm), vacuum UV (VUV) radiation (100 to 200 nm) and atomic oxygen. Results indicated that the most durable and best performing coatings were white paint thermal control coatings Z-93, zinc oxide pigment in potassium silicate binder, and YB-71, zinc orthotitanate pigment in potassium silicate binder. Optical micrographs of these materials exposed to the individual environmental effects of atomic oxygen and vacuum thermal cycling showed that no surface cracking occurred.

Dever, Joyce A.↗
NASA NTRS1986

Electrical power systems for Mars

Electrical power system options for Mars Manned Modules and Mars Surface Bases were evaluated for both near-term and advanced performance potential. The power system options investigated for the Mission Modules include photovoltaics, solar thermal, nuclear reactor, and isotope power systems. Options discussed for Mars Bases include the above options with the addition of a brief discussion of open loop energy conversion of Mars resources, including utilization of wind, subsurface thermal gradients, and super oxides. Electrical power requirements for Mission Modules were estimated for three basic approaches: as a function of crew size; as a function of electric propulsion; and as a function of transmission of power from an orbiter to the surface of Mars via laser or radio frequency. Mars Base power requirements were assumed to be determined by production facilities that make resources available for follow-on missions leading to the establishment of a permanently manned Base. Requirements include the production of buffer gas and propellant production plants.

Giudici, Robert J.↗
NASA NTRS1991

Experiments with phase change thermal energy storage canisters for Space Station Freedom

The solar dynamic power module proposed for the Space Station Freedom (SSF) uses the heat of fusion of a phase change material (PCM) to efficiently store thermal energy for use during eclipse periods. The PCM, a LiF-20CaF2 salt, is contained in annular, metal canisters located in a heat receiver at the focus of a solar concentrator. PCM canister ground-based experiments and analytical heat transfer studies are discussed. The hardware, test procedures, and test results from these experiments are discussed. After more than 900 simulated SSF orbital cycles, no canister cracks or leaks were observed and all data were successfully collected. The effect of 1-g test orientation on canister wall temperatures was generally small while void position was strongly dependent on test orientation and canister cooling. In one test orientation, alternating wall temperature data were measured that supports an earlier theory of oscillating vortex flow in the PCM melt. Analytical canister wall temperatures compared very favorably with experimental temperature data. This illustrates that ground-based canister thermal performance can be predicted well by analyses that employ straight-forward, engineering models of void behavior and liquid PCM free convection.

Kerslake, Thomas W.↗
NASA NTRS2007

NEXT Ion Propulsion System Configurations and Performance for Saturn System Exploration

The successes of the Cassini/Huygens mission have heightened interest to return to the Saturn system with focused robotic missions. The desire for a sustained presence at Titan, through a dedicated orbiter and in-situ vehicle, either a lander or aerobot, has resulted in definition of a Titan Explorer flagship mission as a high priority in the Solar System Exploration Roadmap. The discovery of active water vapor plumes erupting from the tiger stripes on the moon Enceladus has drawn the attention of the space science community. The NASA's Evolutionary Xenon Thruster (NEXT) ion propulsion system is well suited to future missions to the Saturn system. NEXT is used within the inner solar system, in combination with a Venus or Earth gravity assist, to establish a fast transfer to the Saturn system. The NEXT system elements are accommodated in a separable Solar Electric Propulsion (SEP) module, or are integrated into the main spacecraft bus, depending on the mission architecture and performance requirements. This paper defines a range of NEXT system configurations, from two to four thrusters, and the Saturn system performance capability provided. Delivered mass is assessed parametrically over total trip time to Saturn. Launch vehicle options, gravity assist options, and input power level are addressed to determine performance sensitivities. A simple two-thruster NEXT system, launched on an Atlas 551, can deliver a spacecraft mass of over 2400 kg on a transfer to Saturn. Similarly, a four-thruster system, launched on a Delta 4050 Heavy, delivers more than 4000 kg spacecraft mass. A SEP module conceptual design, for a two thruster string, 17 kW solar array, configuration is characterized.

Benson, Scott W.↗
NASA NTRS1980

An overview of the solar maximum mission

The Solar Maximum Mission (SMM), devoted to the study of active solar phenomena is expected to be launched in February 1980 and operate throughout the peak of the current maximum of solar activity. The SMM observatory consists of two main sections: the instrument module which houses the solar payload instruments and the Fine Pointing Sun Sensor System, and the Multimission Modular Spacecraft (MMS) which carries the spacecraft subsystem modules. The entire observatory is 4m long and 2.3m in diameter. The SMM will carry a payload of six instruments specifically selected to study the short wavelength and coronal manifestations of flares. These include: gamma ray spectrometer, hard X-ray burst spectrometer, hard-X-ray imaging spectrometer, soft X-ray polychromator, UV spectrometer and polarimeter, coronagraph/polarimeter and solar constant monitoring package which will measure the total solar irradiance to an accuracy of 0.1 percent. Specific scientific objectives will include: chromospheric evaporation, thermalization, electron acceleration and flare build-up. Complementary studies will be made as part of an SMM Guest Investigator Program. The SMM observation program will be operated on a 24 hour cycle.

Chipman, E. C.↗
NASA NTRS1977

Real-time and accelerated outdoor endurance testing of solar cells

Real-time and accelerated outdoor endurance testing was performed on a variety of samples of interest to the National Photovoltaic Conversion Program. The real-time tests were performed at seven different sites and the accelerated tests were performed at one of those sites in the southwestern United States. The purpose of the tests were to help evaluate the lifetime of photovoltaic systems. Three types of samples were tested; transmission samples of possible cover materials, sub-modules constructed using these materials attached to solar cells, and solar cell modules produced by the manufacturers for the ERDA program. Results indicate that suitable cover materials are glass, FEP-A and PFA. Dirt accumulation and cleanability are important factors in the selection of solar cell module covers and encapsulants.

Forestieri, A. F.↗
NASA NTRS1993

Future operations of Pioneer 10 and 11

The Pioneers 10 and 11 spacecraft were launched on 2 March 1972 and 5 April 1973 and are now 53 and 35 AU from the sun. Pioneer 10 is now the most distant man-made object in our solar system and the in situ measurements of the gas and dust surrounding the sun have been obtained for almost two solar sunspot cycles. Plasma analyzer measurements out to 50 AU show that the mean velocity is about 430 km/sec, the mean density decreases as R exp -2, and that the terminal shock has not been encountered. The magnetic field is drawn out to form Archimedean spirals in the ecliptic place and dipolelike asymmetry in the polar directions as predicted by the Parker model. Galactic cosmic ray measurements of the intensity and radial gradient indicate a 'modulation boundary' between 70 to 100 AU from the sun. All measurements to date indicate that both spacecraft are within the heliosphere and proceeding toward the outer boundary where the modulating effect of solar activity on cosmic ray intensity ceases.

Dyal, P.↗