Search NASA⌕ Search

SEARCH · Search NASA

Results for “Tech”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Test of Superconducting Wires and Rutherford Cables With High Specific Heat

High-field accelerator magnets made of state-of-the-art Nb 3 Sn Rutherford cables demonstrate relatively long trainings due to sudden heat depositions originated by thermo-mechanical perturbations in the magnet coils. Coil sensitivity to these perturbations can be reduced by increasing the specific heat, Cp, of major coil components - strands, or whole cable, or epoxy. The R&D on all these three approaches is in progress. This paper studies feasibility of increasing the Cp of Rutherford-type cables by using a thin composite Cu/Gd 2 O 3 tape. The tape can be either wrapped around the cable, placed on the cable wide faces under the insulation, and/or inserted as a core. In this work, Cu/Gd 2 O 3 ribbons with ~30% of Gd 2 O 3 powder and two different thicknesses were produced by Hyper Tech Research, Inc. Wire and cable samples outfitted with these high-Cp ribbons, or tapes, were prepared and tested at FNAL for the Minimum Quench Energy (MQE). At 80%Ic, the MQE gain average over the tested magnetic field range of the NbTi cable with high-Cp tape on both sides was ~1.3. The MQE gain average of the NbTi wire wrapped with the high-Cp ribbon was 3.1.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Microgrid Modeling for Stability Analysis

Here this document is a summary of a report prepared by the IEEE PES Task Force (TF) on Microgrid (MG) Dynamic Modeling, IEEE Power and Energy Society, Tech. Rep. PES-TR106, 2023. In this paper, the major issues and challenges in microgrid modeling for stability analysis are discussed, and a review of state-of-the-art modeling approaches and trends is presented. In the context of the IEEE 1547 standard, the document covers issues associated with component models for MG dynamic studies and simulations, including generator and grid modeling, full and average converter models, unbalanced and balanced system conditions, dynamic and static loads, protection requirements, and detailed and simplified controls considering communications delays, packet losses, and security issues. Considering the future integration of grids and MGs to form broad integrated networks, a discussion is presented of the use of phasor vis-à-vis electromagnetic transient simulation tools for MG dynamic stability studies, as well as modeling scale-up issues and MG equivalent models. Specifically white-, grey-, and black-box models, are presented. This TF paper and companion report constitute a modeling guide for R&D groups working on developments and standards of MGs with a focus on stability issues.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

ODI notebook additive_manufacturing_video_2022

Additive Manufacturing, video dataset Two-photon lithography (TPL) is a widely used 3D nanoprinting technique that uses laser light to create objects. Challenges to large-scale adoption of this additive manufacturing method include identifying light dosage parameters and monitoring during fabrication. A research team from LLNL, Iowa State University, and Georgia Tech is applying machine learning models to tackle these challenges-i.e., accelerate the process of identifying optimal light dosage parameters and automate the detection of part quality. Funded by LLNL's Laboratory Directed Research and Development Program, the project team has curated a video dataset of TPL processes for parameters such as light dosages, photo-curable resins, and structures. Both raw and labeled versions of the datasets are available on the links in the Open Data Initiative page. The code uses the labeled dataset. Notebook compiled by Nisha Mulakken (mulakken1@llnl.gov) for LLNL Open Data Initiative, Summer 2022. Original code provided by research team. Publications: X.Y. Lee, S.K. Saha, S. Sarkar, B. Giera. "Automated detection of part quality during two-photon lithography via deep learning." Additive Manufacturing 36, December 2020: doi.org/10.1016/j.addma.2020.101444 X.Y. Lee, S.K. Saha, S. Sarkar, B. Giera. "wo Photon lithography additive manufacturing: Video dataset of parameter sweep of light dosages, photo-curable resins, and structures." Data in Brief 32, October 2020. doi.org/10.1016/j.dib.2020.106119.

Mulakken, NishaJ↗
DOE OSTI2025

pnnl/Lagrangian-Droplets

The Lagrangian Droplet cloud microphysics scheme uses high-resolution data of air velocity, temperature, and water vapor mixing ratio to drive particle-based simulations of cloud microphysics. The model was first implemented using a high-resolution Large Eddy Simulation of the Pi Chamber at Michigan Tech, which is small-scale convection chamber the generates clouds in a laboratory setting

Fierce, Laura [Pacific Northwest National Laborato↗
DOE OSTI2022

Supersaturation Variability from Scalar Mixing: Evaluation of a New Subgrid-Scale Model Using Direct Numerical Simulations of Turbulent Rayleigh–Bénard Convection

We report that supersaturation fluctuations in the atmosphere are critical for cloud processes. A nonlinear dependence on two scalars - water vapor and temperature - leads to different behavior than single scalars in turbulent convection. For modeling such multiscalar processes at subgrid scales (SGS) in large-eddy simulations (LES) or convection-permitting models, a new SGS scheme is implemented in CM1 that solves equations for SGS water vapor and temperature fluctuations and their covariance. The SGS model is evaluated using benchmark direct-numerical simulations (DNS) of turbulent Rayleigh–Bénard convection with water vapor as in the Michigan Tech Pi Cloud Chamber. This idealized setup allows thorough evaluation of the SGS model without complications from other atmospheric processes. DNS results compare favorably with measurements from the chamber. Results from LES using the new SGS model compare well with DNS, including profiles of water vapor and temperature variances, their covariance, and supersaturation variance. SGS supersaturation fluctuations scale appropriately with changes to the LES grid spacing, with the magnitude of SGS fluctuations decreasing relative to those at the resolved scale as the grid spacing is decreased. Sensitivities of covariance and supersaturation statistics to changes in water vapor flux relative to thermal flux are also investigated by modifying the sidewall conditions. Relative changes in water vapor flux substantially decrease the covariance and increase supersaturation fluctuations even away from boundaries.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Measurement of Sauter mean diameter in diesel sprays using a scattering–absorption measurement ratio technique

A new diagnostic for the quantification of Sauter mean diameter in high-pressure fuel sprays has been recently developed using combined optical and X-ray measurements at the Georgia Institute of Technology and Argonne National Laboratory, respectively. This diagnostic utilizes liquid scattering extinction measurements from diffuse back-illumination imaging, conducted at Georgia Tech, and liquid absorption measurements from X-ray radiography, conducted at Argonne’s Advanced Photon Source. The new diagnostic, entitled the scattering–absorption measurement ratio, quantifies two-dimensional distributions of path-integrated Sauter mean diameter, enabling the construction of the spatial history of drop size development within practical fuel sprays. This technique offers unique benefits over conventional drop-sizing methods in that it can be more robust in optically dense regions of the spray, while also providing high spatial resolution of the corresponding droplet field. The methodology for quantification of Sauter mean diameter distributions using the scattering–absorption measurement ratio technique has been previously introduced and demonstrated in diesel sprays using the Engine Combustion Network Spray D injector; however, a more detailed treatment of measurement uncertainties has been needed. In this work, we present a summary of the various sources of measurement uncertainty in the scattering–absorption measurement ratio diagnostic, like those due to the experimental setup, data processing methods, and theoretical assumptions, and assess how these sources of uncertainty affect the quantified Sauter mean diameter. The spatially resolved Sauter mean diameter measurements that result from the scattering–absorption measurement ratio diagnostic will be especially valuable to the engine modeling community for the quantitative validation of spray submodels in engine computational fluid dynamics codes. Careful evaluation and quantification of measurement uncertainties are important to support accurate model validation and to ensure the development of more predictive spray models.

42 ENGINEERING↗
DOE OSTI2022

Sensitivity analyses of a homogeneous model and a RZ model of the MYRRHA reactor in its critical configuration

Two homogenized models of the MYRRHA (Multi-purpose hybrid Research Reactor for High-tech Applications) reactor in its critical configuration are presented in this study. Both models will be verified by comparing the main reactor parameters (K{sub eff}, β{sub eff} and Λ) with those of the heterogeneous model and a sensitivity analysis will be performed. A sensitivity analysis of some important parameters related to reactivity, namely the vacuum coefficient, the Doppler and the power peaking factors, is also presented. The study of the vacuum coefficient has been carried out by analyzing two possible scenarios: 50% vacuum in the coolant (lead bismuth eutectic) and 100%, obtaining a list of the 10 reactions and nuclides that most affect the k{sub eff} value. With respect to the Doppler coefficient, it will be seen that a 300 degree increase in fuel temperature (starting at 800 K) results in a reduction of the total reactivity of the system by 134 pcm.. Finally, the map of the power peaking factors will be shown, as well as a sensitivity analysis. For making the sensitivity calculations Serpent-2 reactor physics Monte Carlo code has been used and JEFF-3.3 library has been chosen in order to continue with the OECD/NEA WPEC SG46 work evaluating the nuclear data of this library. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

AmeriFlux FLUXNET-1F US-Lin Lindcove Orange Orchard

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-Lin Lindcove Orange Orchard. This is the FLUXNET version of the carbon flux data for the site US-Lin Lindcove Orange Orchard produced by applying the standard ONEFlux (1F) software. Site Description - The experimental site was a citrus orchard about three km west of the UC Lindcove Research and Experiment Station. The site is characterized by a Mediterranean climate typical of Central California, with warm dry summers and cool wet winters. The soil texture for the upper horizon (0-33 cm) was loam with a particle size distribution of 42% sand, 38% silt, and 20% clay (Kearney Ag Center). Soil pH was 7.4 (Valley Tech Soil Agricultural Laboratory Services). The orchard was drip-irrigated with water applied twice per week in the warm season to ensure water avail- ability close to field capacity. The site was kept clean from understory vegetation and mechanical pruning operations took place twice a year to limit the size ofthe orange trees for harvesting and site maintenance. The block of trees in which the tower and instruments were located was ‘Valencia’ orange on trifoliate rootstock, with a planting date in the 1960’s. The square 4 ha block had dimensions of 200 m NeS and EeW. At the end of the study, we harvested a ‘Valencia’ citrus tree from within the study block to measure citrus leaf area index (LAI) and biomass density. The tree height was 3.7 m as measured with a telescoping pole. We measured canopy radii in the four cardinal directions to calculate a planar area (as seen from above) of 12.2 m2. The mean specific leaf area (SLA) of citrus leaves was 85.4 cm2 g-1 obtained by measuring leaf area of five groups of leaf samples with a LiCor Leaf area meter (mod. LI-3100C) followed by drying and weighing. LAI for the orchard was 3.00, derived using the SLA value and the total dry mass of leaves from the harvested tree, multiplied by the plant population of 237 plants per ha as obtained from spacing measurements and Google Maps imagery.

Fares, Silvano↗
DOE OSTI2025

Beyond Like-for-Like: A User-centered Approach to Modernizing Legacy Applications

When modernizing a legacy application, it is easy to fall back on a like-for-like replica with new tools and updated design stylings, but this is an opportunity to explore making a more intuitive application that supports user tasks and efficiency. Rather than having a blank canvas-unburdened by legacy tech debt-to create a new application, you are working with an existing application that is integral to accelerator operations and one that expert users are already familiar with. Due to this, you might assume people will prefer the like-for-like, but you could be carrying forward the pain points, processes that are inefficient, and ultimately wind up with an application that no one wants to use because it doesn't solve existing problems. Getting users involved can make all the difference in your approach to modernizing a legacy application that caters to both newer and expert users. It also can bridge the gap between like-for-like and introducing new GUI design. Having a legacy application doesn't have to make the modernized one difficult to develop, as the existing application is a tool in how you move forward with the new application. It provides insight into areas that an application with a clean slate doesn't give you.

Polzin, M. [Fermilab]↗
DOE OSTI2021

High Efficiency, Low Cost RF Sources for Accelerators and Colliders

Calabazas Creek Research, Inc. (CCR) and its collaborators are developing high efficiency, low cost RF sources. Phase and Amplitude Controlled Magnetrons: CCR, Fermilab, and Communications & Power Industries, LLC (CPI) recently developed a 100 kW, 1.3 GHz magnetron system with amplitude and phase control. The system operated at more than 80% efficiency and demonstrated rapid control of amplitude and phase. Multiple Beam Triodes: CCR, in collaboration with CPI and JP Accelerator Works, Inc., is developing 200 kW, pulsed and CW RF sources from 350 to 700 MHz with projected efficiencies exceeding 80% and cost of $0.50/Watt. Prototype tubes are scheduled for tests in spring 2021. High Efficiency Klystrons:CCR, CPI, and Leidos, Inc. are building a 1.3 GHz, 100 kW klystron operating at 80% efficiency. High power testing is scheduled for summer 2021. Multiple Beam IOTs: CCR and Georgia Tech Research Institute are developing MBIOTs with simplified input coupling and high efficiency. Simulations indicate that 3rd harmonic drive power can increase the efficiency 8-10 %. The program is developing a prototype tube to produce 200 kW peak, 100 kW average power at 704 MHz.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

DEVELOPMENT OF PLASMA SIMULATION TOOL FOR THE ACCEL-ERATING CAVITIES

Plasma processing of superconducting radio frequency (SRF) cavities has shown an improvement in accelerating gradient by reducing the radiation due to field emission and multipacting. Plasma processing is a common tech-nique where the free oxygen produced by the plasma breaks down and removes hydrocarbons from surfaces. This increases the work function and reduces the second-ary emission coefficient. The hydrocarbon fragments of H2, CO, CO2, and H2O are removed from the system with the process gas which is flowing through the system. Here, we present COMSOL for the first time to simulate the plasma processing of an SRF cavity. In this work, we use Jefferson Lab's C75 SRF cavities design as our case study. Using simulation, we predict the condition of plasma ignition inside the SRF cavity. The simulation provides information about the optimal rf coupling to the cavity, mode for plasma ignition, choice of gas concen-tration, power, and pressure.

Senevirathne, I.↗
DOE OSTI2021

Improving Subsurface Stress Characterization for Carbon Dioxide Storage Projects

Researchers at New Mexico Tech, Los Alamos National Laboratory (LANL), Sandia National Laboratory (SNL), and other collaborators are developing a methodology to improve characterization of stress in the subsurface by means of a model-based inversion of reservoir engineering data, time lapse seismic measurements, and microseismicity. Historically, various geophysical techniques have been used in efforts to understand the state of stress in the subsurface through direct and indirect imaging of stress sensitive features (faults and fractures) and observations of transient stress related observations (time variant elastic moduli and microseismicity). Standard direct and indirect techniques for seismic fault and fracture imaging suffer from detectability limits due to reliance on high data quality and multiplicity. Variations in effective elastic properties from inversion of high quality seismic (Vertical Seismic Profile (VSP)) data may be used to infer stress near the wellbore through integration with independent experimental characterization of the stress-velocity relationship. Given a sufficiently robust observation network, microseismic emissions may be inverted to characterize focal mechanisms which, together with supporting assumptions and constraints, inform estimates of in-situ stress. While each of these techniques contributes in part to the characterization of stress within limited spatial and temporal domains, no one method provides an unambiguous stress measurement or a predictive capability over a site scale spatial extent. Challenges associated with solution non-uniqueness, measurement ambiguity, and irregular sampling may be greatly minimized through combination of one or more of independent measurements within a common framework in which realistic geological, hydrodynamic, geomechanical, and seismological constituent process models may act as constraints.

02 PETROLEUM↗
DOE OSTI2018

Vegetation and Wildlife Surveys at the National Renewable Energy Laboratory, National Wind Technology Center: July 2010-May 2011

This year-long wildlife and vegetation study was conducted to update the National Wind Technology Center (NWTC) vegetation and wildlife baseline conditions. These updated baseline conditions will be used to support future National Environmental Policy Act (NEPA) analyses. NWTC is a laboratory center of the National Renewable Energy Laboratory (NREL), a national laboratory of the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy, and operated by the Alliance for Sustainable Energy, LLC. The current effort involved conducting four seasons of vegetation and wildlife surveys beginning in July 2010 and ending in May 2011. This report presents the results of these surveys. Concurrent avian monitoring studies by Tetra Tech, Inc. were conducted beginning January 2010 to September 2011. The results of these surveys are presented in a separate report. Prior to the current study, Plantae (2000) completed a site characterization of vegetation communities and noxious weeds, Monahan (1996) conducted a raptor study, and Schmidt et al. (2003) conducted a bird and bat use and fatality study. More recently, Walsh conducted a bat study in 2010.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Evaluation of flow and heat transfer inside lean pre-mixed combustor systems under reacting flow conditions

The objective of the present work was to develop methodologies to measure heat transfer within a reacting gas turbine combustor. To accomplish this, an optically accessible research combustor system was designed and constructed at Virginia Tech, capable of operating at 650 K inlet temperature, maximum air mass flow rates of 1.3 kg/s, and flame temperatures over 1800 K. Flow and heat transfer measurements at non-reacting and reacting conditions were carried out for Reynolds numbers (Re) with respect to the combustor diameter ranging from ~11 500 to ~140 000 (depending on the condition). Particle Image Velocimetry (PIV) was used to measure the non-reacting flow field within the burner, leading to the identification of coherent structures in the flow that accounted for over 30% of the flow fluctuation kinetic energy along the swirling jet shear layers. The capability of infrared (IR) thermography to image surface temperatures through a fused silica (quartz) glass was demonstrated at non-reacting conditions. IR thermography was then used to measure the non-reacting steady state heat transfer along the combustor liner. A peak in heat transfer was identified at ~1 nozzle diameter downstream of the combustor dome plate. The peak Nusselt number along the liner was over 18 times higher than that predicted from fully developed turbulent pipe flow correlations, which have traditionally been used to estimate flame side combustor heat transfer. For the reacting measurements, a novel time-dependent heat transfer methodology was developed that allowed for the investigation of transient heat loads, including those occurring during engine ignition and shutdown. The methodology was validated at non-reacting conditions, by comparing results from an experiment with changing flow temperature, to the results obtained at steady state. The difference between the time-dependent and the steady state measurements were between 3% and 17.3% for different mass flow conditions. The time-dependent methodology was applied to reacting conditions for combustor Reynolds numbers of ~12 000 and ~24 000. At an equivalence ratio of ~0.5 and a combustor Reynolds number of ~12 000, the peak heat load location in reaction was shifted downstream by 0.2 nozzle diameters compared to the non-reacting cases. At higher equivalence ratios, and more visibly at a Reynolds number of ~24 000, the heat transfer distribution along the combustor liner exhibited two peaks, upstream and downstream of the impingement location (X/DN = 0.8-1.0 and X/DN ≈ 2.5). Reacting PIV was performed at Re = 12 000 showing the presence of a strong corner recirculation, which could potentially convect reactants upstream of the impingement point, leading to the double peak structure observed. The methodologies developed have provided insight into heat transfer within gas turbine combustors. The methods can be used to explore additional conditions and expand the dataset beyond what is presented, to fully characterize reacting combustor heat transfer.

42 ENGINEERING↗
DOE OSTI2018

Causal Analysis Report for NA-SS-SNL-8000-2018-0002 Electrical shock: Wind Turbine Nacelle Lubbock TX

A Sandia National Laboratories Member of the Workforce (MOW) experienced contact with electrical energy while performing work on an oil filter pump electrical system in the al wind turbine nacelle at Sandia National Laboratories Scaled Wind Turbine Facility (SWiFT). The Department of Energy (DOE) Sandia National Laboratories (SNL) Scaled Wind Farm Technology (SWiFT) facility does research and development (R&D) work in collaboration with Texas Tech University. The SWiFT facility includes three turbines for performing wind plant and turbine technology research in support of DOE's Wind Energy Technology Office. The current work ongoing at the site is primarily related to commissioning the three turbines to support ongoing DOE customer needs and requests. It was during the performance of commissioning tests of the hydraulic systems in the a1 turbine that a Sandia MOW experienced contact with electrical energy. There were multiple root and contributing causes that ultimately resulted in the electrical energy contact. These causes are summarized and aligned to their corrective actions in the corrective action plan table provided in Section 7(c). The purpose of this narrative section is to provide additional information and context

17 WIND ENERGY↗
DOE OSTI2018

Self-Powered Flexible Displays

Wearable technology is the new frontier in the tech industry. To be wearable, a device must be flexible, durable, and bio-compatible. As all electronics, these devices are going to consume energy. Currently, the world uses lithium ion batteries for its energy needs. The demand for lithium has become so high that the world reserves are threatening to run out far quicker than expected. This makes it imperative that we find a suitable alternative material to keep up with current power demands and, while we are at it, address the drive for low-cost, flexible power sources that the flexible electronics industry will surely need. The answer to this need can be potentially found in Triboelectric Nanogenerators (TENGs). Not only are TENGs flexible, they are also low-cost and stand-alone power sources, meaning that they have no need for bulky or rigid batteries. TENGs work based on the triboelectrification effect.

25 ENERGY STORAGE↗
DOE OSTI2018

Parametric Studies for Plutonium Metal-Water Mixtures in Arrays of 6-Inch Columns

A parametric study for arrays of 6-inch diameter tank columns was performed in order to assist in the practical development of limits for plutonium solution operations. This technical document utilizes approaches taken in NCS-TECH-10-009 [Reference 1]. While this technical document expands on areas where the authors feel appropriate, it does not attempt to recreate all parts of the existing technical document. This technical document is intended to be used in conjunction with the previous technical document. The results reported in this technical document may be used to support facility-specific program documents or individual Criticality Safety Evaluation Documents (CSEDs). This technical document does not derive any specific requirements. Caution should be taken when applying these results; it is the criticality safety analyst's responsibility, if he/she chooses to utilize this technical document, to properly assess the applicability of the results presented herein for his/her application.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗